Used Sanding Table for sale (18,219)

Year of construction: 2013, condition: used, Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! Lasdpfx Ahoy Spvleaoh ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: like new (used), Year of construction: 2020, Welding positioner table for sale Sale only within EU member states! No private sales. MAE can be inspected upon request. Laedpfx Ahoz Rxz Rjaeh All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Lajdpfxezvwilo Ahaoh Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: excellent (used), maximum belt width 240 mm mechanical oscillation cast iron housing dimensions of the side table: 800x450 mm Ledpfx Ahezmwddoasah two motors, 4.5 kW each manual adjustment of the unit spacing

Year of construction: 2018, condition: used, Working width: 2,500mm, air flow rate: 1,600m³/h, motor power: 1.5kW. Equipment: integrated under-table extraction system, radial fan with spark protection, filter elements below the wooden grate, pneumatic filter cleaning, direct air recirculation, wooden grate with defined gap spacing, galvanized and painted sheet steel, integrated motor protection switch and compressed air supply, CE marking. On-site inspection is possible. Lasdoz R A Nrspfx Ahaoh

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic Lajdsv D Rg Depfx Ahash machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: excellent (used), Rotary table Diameter: 300 mm Height: 82 mm T-slot width: 10 mm Indexing: 2 degrees per handwheel revolution Width: 400 mm Lasdpfx Aoxz Tu Ijhaeh Depth: 450 mm Weight: 38 kg

Year of construction: 1995, condition: not inspected (used), Number of sanding units 2 st. sanding width 180 mm Sanding height max. 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided; sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers; infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machine's upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch with automatic shutdown of all drives Technical data: Top motor: 4 kW Bottom motor: 4 kW Top brush: 0.37 kW Bottom brush: 0.37 kW Feed drive: 0.5 kW Height adjustment: 0.12 kW Compressed air requirement: 6 bar, 400 NL/min Sanding belt speed: 25 m/sec Machine dimensions: 1,600 mm length 1,150 mm width 1,800 mm height Workpiece dimensions: Min. thickness 15 mm, max. thickness 150 mm Min. width 10 mm, max. width 180 mm Min. length 290 mm 4 extraction ports: 2 x 120 mm, 2 x 80 mm; required air velocity at extraction port: 25 m/sec Laedpfxezqgg As Ahash (Technical specifications according to manufacturer – subject to change/no guarantee!)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4400 € 2400 x 1200 mm 850 mm 8000 kg 945 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 Laodpfx Aewiriishash The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners OPTION (PRICE ON REQUEST): Diagonal holes

Condition: excellent (used), Dividing table – rotary table Brand: PDQ Diameter: 635 mm Height: 145 mm Base diameter: 760 mm Indexing: 45° via index or 1° and minutes via scale Lasdpfoxazu Hsx Ahaeh Weight: 280 kg

Condition: new, Number of sanding units 1 St. Lsdpfx Asytx Ufehaeah Profile width 390 mm Profile height max. 390 mm

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Laedpod Anz Refx Ahaeh Tilt angle up to 135° Hand and foot remote control with speed display Very robust

Condition: as good as new (ex-display), Container rotating device, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Laodpfx Ajd An Aaohajh Speed continuously adjustable, 80 to 1600 mm/min. Diameter 40mm to 1400mm Roller diameter 200mm L: 800 x W: 370 x H: 450 Model or color variations possible.

Condition: new, Year of construction: 2022, Protec Welding Positioner – 10,000 kg load capacity Steplessly adjustable speed: 0.05 – 0.5 RPM Handheld and foot-operated remote control Height: 650 mm Laedpfxjd An Aie Ahash Diameter: 1800 mm

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity, welding rotary table, CE certified very robust Ledpjd A Etuofx Ahaeah Speed infinitely adjustable from 0.05 to 0.7 RPM; higher speeds available on request Rotary table diameter: 1200 mm Tilting angle up to 120° Height in horizontal position: 950 mm, tilted to the center: 720 mm Hand and foot remote control Length: 1.35 m x Width: 1.2 m

Year of construction: 2020, condition: like new (used), Welding positioner KT 300 Load capacity, horizontal: 300 kg, tilted: 150 kg Power consumption: 220 V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Lsdpfxod A Etwo Ahajah Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 0.3 – 2.5 RPM Includes foot pedal remote control Additional cost: Quick-change chuck Diameter: 400 mm, €550

Condition: good (used), Container rotating device, Protec Welding Technology 1000 kg load capacity with foot-operated remote control Speed of 80 - 1600 mm/min Laodpfx Aec Ny S Njhash Diameter 20 to 700 mm

Condition: as good as new (ex-display), Year of construction: 2019, 1200 kg load capacity welding rotary table, Ljdpfxsfg Uv Ho Ahaoah very robust Speed continuously adjustable from 0.05 to 0.9 RPM Rotary table diameter 1200 mm Tilting up to 120° Height in horizontal position 950 mm, tilted to center 720 mm Hand and foot remote control Length 1.35 m x width 1.2 m

Condition: new, Year of construction: 2024, table load: 2,000 kg, Welding turntable, 2000 kg load capacity with manual and foot-operated remote control Diameter 1200 mm Bore diameter 100 mm Lodpsgfqk Tjfx Ahasah Height 580 mm Variable speed 0 - 0.6 RPM AC 380 V motor

Condition: new, Year of construction: 2024, Welding positioner with a 500 kg load capacity with manual and foot-operated remote control Lajdpfxjgfv Ske Ahaoh Diameter 690 mm Bore 100 mm Height 580 mm Variable speed 0.15 - 2.0 RPM AC 380 V motor

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost. Lodpfx Aeid Szcehajah

Condition: as good as new (ex-display), Year of construction: 2020, Container rotating device, rotating device Laodpfx Ahjigng Noaoh Length and wheelbase are adjustable.

Condition: new, Year of construction: 2022, Welding rotary table Protec KT 5000 HV Laodsig T Eaopfx Ahaeh Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Dimensions: minimum tilted height: 800 mm maximum tilted height: 1900 mm minimum horizontal height: 1050 mm maximum horizontal height: 2000 mm diameter of the clamping disc: 1500 mm length: 2900 mm, width: 1400 mm weight: 3200 kg speed: from 0.01 to approximately 0.7 RPM.

Year of construction: 2022, condition: as good as new (ex-display), 2000 kg load capacity, rotating welding table, height-adjustable Complete set Speed continuously adjustable from 0.05 to 0.7 RPM Lodpjk Adhuefx Ahajah Rotating table diameter 1200 mm Tilting angle from 0 to 120° Height adjustment from 1450 mm to 2050 mm Hand and foot remote control

Condition: new, Year of construction: 2024, Welding positioner Protec KT 10 000 HV Complete set including hand-held and dual-pedal remote control Digital display for speed Hydraulic height adjustment Tilting range from 0 to 130° Dimensions: minimum height when tilted: 1080mm maximum height when tilted: 2200mm Ledpfx Aek S D N Eehaeah minimum height in horizontal position: 1400mm diameter of the clamping plate: 2000mm length: 3250mm, width: 1780mm speed from 0.05 to approximately 0.6 RPM.