Used Saw 3 for sale (67,034)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,403 h, load capacity: 2,000 kg, lifting height: 5,500 mm, free lift: 1,780 mm, fuel type: electric, mast type: triplex, construction height: 2,422 mm, fork carriage width: 980 mm, fork length: 1,150 mm, empty load weight: 3,846 kg, total length: 2,098 mm, drive type: Elektro, construction width: 1,120 mm, Electric 3-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Non-marking Front tire size: 200/50-10 Front tire condition: 60 - 80% Rear tire type: Non-marking Rear tire size: 140/55-9 Rear tire condition: 20 - 40% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2018 Dkedoz Hgbpjpfx Ak Asw Battery condition: 60 - 80% Description: Inspection and safety check recently performed Side shifter, fork positioner, 3rd valve, 4th valve, front work light, roof protection, windshield, half-cab, heater, compliant with STVZO (German Road Traffic Licensing Regulations), full cab, full free lift, interior mirror, LED, 2-pedal operation, joystick (Duo-Pilot), comfort seat, panoramic rearview mirror, multi-color display, optional button panel, floor spot light front + rear, electric steering, electric brake, driver's door missing, battery can be regenerated upon request (for an additional charge).

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Djdpfj Afznuox Ak Ajkw Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Dksde Ah Hbcspfx Ak Asw Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Vibrating feeder, bowl feeder, vibratory part feeder, Used machine Manufacturer: Gasco Dsdpfx Ae Aibtgjk Aokw Model: BVN 3 Overall dimensions: 430 x 430 x 460 mm Weight: 63 kg Electrical data: 230V; 1.6A; 368 watts Bowl size: 330 - 400 mm

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 240 mm capacity 45 degrees: flat 240 x 160 mm capacity 60 degrees: round 160 mm capacity 60 degrees: flat 150 x 150 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1200 kg The MEP SHARK 331 DIRECT is a state-of-the-art, electro-hydraulic automatic bandsaw of the highest caliber. It has been specifically developed for the high-precision cutting of solid materials, pipes, profiles, and metal bars. Thanks to its extremely robust construction and maximum flexibility, it adapts perfectly to any industrial production process. CNC electro-hydraulic automatic bandsaw featuring: * Automatic mode – for fully automated series production * Semi-automatic mode – for controlled individual cuts Technical Highlights & Industry 4.0 Readiness - Direct control technology: * Makes the sawing machine fully digital, networked, and ready for . Seamless integration into automated production lines - Intuitive 10" touchscreen display: * The completely redesigned user interface minimizes staff training time and . ensures smooth process management. - Integrated cutting library: * Once the material dimensions, type, and thickness are entered, the control . system automatically suggests the best saw blade, the ideal cutting speed, . and the optimal force parameters. The operator, however, retains full manual . control at all times. - IIoT-ready & real-time support: * Real-time data transmission enables predictive maintenance, minimizing . downtime. If necessary, technical support can access the control system . directly via secure remote access—no VPN required. - Future-proof safety: * The machine already complies with the stringent safety and efficiency . standards set for 2027. - Massive data storage: * Capacity for up to 100,000 programs and 9,999 cutting sequences. Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) - MEP CNC "DIRECT" control technology * User interface with an intuitive 10" touchscreen display * Includes mechanical buttons * Ensures reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Swivel-mounted arm for convenient and safe operation * Display and logging of alarms and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts—possible on one side up to 60° - Protective enclosure for operator safety - Infinitely variable adjustment * Cutting speed from 15 to 100 m/min * Controlled via frequency converter (inverter) - Latest-generation hydraulic power unit * Highly efficient with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposing ball bearings * 600 mm single-stroke capacity, repeatable for cutting any desired length - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade suitable for solid and profile materials - Tools and operating manual, including a spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = ± 0.1 mm per feed stroke Information from the manufacturer – please note: Dkjdpfxo Afzuue Ak Asw If this saw is installed in a system equipped with a residual current device (RCD/GFCI), i...

Condition: new, empty load weight: 6,950 kg, maximum load weight: 24,050 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing points, 12 pocket slots for securing cargo, 2 ramps, each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Additional options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber supports, hydraulic adjustment of the ramps. Also available with a K80 tow hitch! Dsdpfx Ao Agfmkek Askw -- Subject to printing errors, mistakes and changes, sample images -- More data available at: !

Condition: new, empty load weight: 7,300 kg, maximum load weight: 26,700 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 70 mm thick wooden floor, 18 tie-down points, 12 pocket slots, 2 ramps, each 3,110 mm long x 760 mm wide, climbing strip on the outside of the ramps and the rear slope, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Further options available at an extra cost: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with wooden extensions, hydraulic adjustment of the ramps. -- Subject to printing errors, mistakes, and changes. Sample images. -- More details: ! Djdpfxe Agfmve Ak Ajkw

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading bed length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loaded platform height approx. 890 mm, 24 tie-down rings each 10 t, 12 stake pockets in the outer frame, access ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, access ramps laterally adjustable, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, revolving beacon, vehicle hot-dip galvanized, incl. axle load indicators. Surcharge for: warning signs with lighting and revolving beacon, widening to 3 m with wood inserts, price: 500 €; digger arm recess, price: 1,000 € net. -- Printing errors, mistakes and changes reserved, sample pictures -- More data at: !, More details at: ! Dsdpfxe Agfpbo Ak Aekw

Condition: new, empty load weight: 7,300 kg, maximum load weight: 26,700 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 70 mm thick wooden floor, 18 tie-down points, 12 pocket slots, 2 ramps, each 3,110 mm long x 760 mm wide, climbing strip on the outside of the ramps and the rear slope, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Further options available at an extra cost: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with wooden extensions, hydraulic adjustment of the ramps. -- Subject to printing errors, mistakes, and changes. Sample images. -- More details: ! Dkodpe Agfqysfx Ak Asw

Condition: new, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, 70 mm thick wooden floor, 18 tie-down points, 12 pocket slots, 2 ramps, each 3,110 mm long x 760 mm wide, climbing strip on the outside of the ramps and the rear slope, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Dodpfs Agfrdjx Ak Askw Further options available at an extra cost: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with wooden extensions, hydraulic adjustment of the ramps. -- Subject to printing errors, mistakes, and changes. Sample images. -- More details: !

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,100 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Load area length 8,100 mm, loading height approx. 900 mm, 20 x lashing eyes, each with a capacity of 10 t, 14 x stake pockets in the outer frame, 70 mm thick wooden floor, storage box with lid for lashing chains or tension straps, contour marking as per regulations, spring-loaded parking brake, incl. axle load indicators, vehicle hot-dip galvanized, also available with a 9 m load area length + widening in stock. Surcharge for: aluminum ramps = price: €2,200, warning panels with lighting = price: €800. Subject to printing errors, errors and changes. Sample images. More details at: ! Dsdpj Agt D Rsfx Ak Aokw

Condition: used, empty load weight: 5,300 kg, maximum load weight: 18,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2014, loading space length: 9,400 mm, suspension: steel, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 900 mm, loading area length approx. 9,400 mm, tie-down points. -- Subject to printing errors, errors and changes. Sample images. -- More data available at: !, More details: ! Djdpj Agt E Iofx Ak Aokw

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load, upper deck length approx. 4,400 mm incl. slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, for 2-axle and 3-axle semi-trailer tractors, kingpin adjustable, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approx. 3,100 mm long, ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More details: ! Dkodpfx Akj Agt E Se Aow

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load monitoring, upper deck length approx. 4,400 mm including slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x lashing point pockets in the outer frame, 32 x lashing points, ramp approx. 4,200 mm long (2-part), ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Dkjdpfx Aj Agt Haok Asw

Condition: ready for operation (used), Siemens 6SN1125-1AA00-0EA0 LT module SN:T-P32033992, the item has been refurbished and has a 3-month warranty, used, normal signs of wear, 100% functional, scope of delivery as per photos Dkodpsxahgpjfx Ak Aow

Condition: excellent (used), Thyristor regulator with field regulator (28211) Manufacturer: Unitek Type: 82 Classic Q. 3 400/450-60 UE 400 UA 450 ld 60 A Ia 120 A Weight: 11 kg Width: 290 mm Depth: 230 mm Height: 225 mm Dsdpfxjhhyy Rs Ak Ajkw

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3 from a training workshop!! Technical data: >> Machine no. 1114 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travels X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Extendable vertical and horizontal spindle - SK-40 >> Collet system S20x2 >> Weight approx. 1300 kg Accessories and equipment: >> Coolant system >> Central lubrication Djdpfx Ao Agbypok Askw About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles can be easily moved. All bellows are new. An oil change has been carried out. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered up. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: used, Year of construction: 1992, Used Machine Year of manufacture: 1992 Features and technical specifications: - Saw blade diameter: 300 mm - Saw blade speed: 4,750 rpm - Motor power: 4.5 kW - Motor speed: 2,880 rpm - Max. cutting width: 5,300 mm - Max. cutting height: 2,100 mm - Max. panel height: 2,200 mm - Max. cutting thickness: 80 mm - Includes small-part support Dkjdpfx Akszk Nnvj Ajw - Dimensions: approx. 6,500 x 1,300 x 2,880 mm - Weight: approx. 900 kg Availability: available shortly Location: 63934 Röllbach

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - track width: 360mm - shaft width: 350mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table dimensions: 2040x1220mm From above: - pawls - toothed feed shaft - pawls - saw shaft - sliding, pressure shaft From below: - rollers in front of the table, 2 pcs - guide - pawls - track - central track lubrication - electric saw shaft lifting - electric body lifting - stepless feed speed adjustment - dust extraction nozzle diameter: 140mm, 160mm - main motor: 30kW - overall dimensions (L/W/H): 2600x2300x1850mm - weight: approx. 4000kg ADVANTAGES – Czech production – used multi-blade saw – very good condition Dsdpe Agur Nsfx Ak Aokw Net price: 30900 PLN Net price: 7190 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 1994, Wheel diameter: 500 mm with motor brake. Maximum cutting height: 320 mm. Column side left, top and bottom, APPA guides. Motor: 1.5 kW. Table tiltable. Mobility device with steering wheels and blade tension indicator. Blade length: min. 4040 mm, max. 4140 mm. Location: Nattheim. Djdpowl D S Ujfx Ak Askw

Condition: used, Storage location: Nattheim Djdpfx Aovvkrdjk Aokw

Condition: used, Year of construction: 1973, Max. cutting length 3200 mm (distance from 1st to 3rd saw blade) with left-side circular saw tiltable up to 45°. Cutting capacity 2200 x 2500 mm. 3 motors, each 4.5 kW. Both cross-cut saws tiltable from 45° to 90°, each with a scoring motor. All three saws up to 400 mm diameter. Minimum cutting width 210 mm. Both scoring saws pneumatically moved forward and back with vacuum suction cups for panel fixation. Storage location: Nattheim. Dodpfx Aovvkm Ijk Aokw

Condition: excellent (used), axle configuration: 1 axle, permissible axle load (axle 1): 9,000 kg, first registration: 02/1999, loading space length: 11,750 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 34 m³, total length: 11,750 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R252.5, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Aluminum rims - Air suspension - Drum brakes = Notes = 1999 FELDBINDER food tank semi-trailer with a capacity of 33,500 liters, 3 compartments (Compartment 1: 8,000 liters / Compartment 2: 22,500 liters + 1 partition / Compartment 3: 3,000 liters), including pump (brand: IBEX PUMPE), ABS/EBS, 3x BPW axles with drum brakes, 1st axle = lift axle, ALCOA rims, unladen weight: 7,320 kg, permissible total weight: 34,000 kg, tires 385/65-R22.5 (L: 6/6/4 mm; H: 6/6/6 mm) = Further Information = General Information Year of construction: 1999 Axle Configuration Tire size: 385/65-R22.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Dksdpfx Akjy Dh D Se Asw Rear axle: Aluminum rims; Max. axle load: 9,000 kg; Tire tread depth left: 25%; Tire tread depth right: 30% Weights Unladen weight: 7,320 kg Payload: 26,680 kg GVW: 34,000 kg Functional Body brand: FELDBINDER TSA33.3-3 Number of compartments: 3 Pump: Yes Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2004, For sale: 3 identical LR Mate 200iB 3L robots Controller: R-J3iB Number of axes: 6 Max. payload: 3 kg Reach: approx. 700 mm Scope of delivery: Robot, controller, cables, touch panel, operating manual The stated price applies per unit, net. Upon request, transport and loading can be arranged throughout Europe for an additional charge. Prices exclude VAT. Inspection is possible by appointment. Contact us, and our team will be happy to assist you. Machine buying/selling Dksdpo Ahqzcefx Ak Ajw PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality but affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach out to us via the contact form.

Condition: good (used), Year of construction: 1980, Bandsaw blade dimensions: recommended size 3400 / 3200 mm Cutting width: 400 mm Bandsaw blade length min./max.: 3200 / 3400 mm Djdpfx Ake Ahq Alo Aekw Bandsaw blade width: 20 x 3 mm Cutting speed: 10 - 2150 / 8 steps (manual) m/min Table size: 670 x 670 mm Table height above floor: 1020 mm Table tilting +/-: left 10° and right 30° Table movement horizontal: 270 mm Total power requirement: approx. 1.5 kW Machine weight approx.: 650 kg Machine dimensions (LxWxH): 1.2 x 1.05 x 2.0 m