Used Schechtl Msb 310 for sale (27)

Condition: excellent (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl, in absolutely top condition! Device features: - Shear model: MSB 200 - Cutting capacity: see nameplate, up to 3mm steel – significantly more for aluminum - Working length: just over 2 meters - Manual back gauge: 500 mm - Side / angle gauge - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 meters - Sheet thickness (steel): 3 mm – significantly more for aluminum and zinc - The machine was used extremely rarely, approx. 1-2 times per month for thin sheets at a lamp manufacturer - It shows hardly any signs of use; this condition is rare - The total price is less than half the current new price – the price list is from last year! If you have any questions, feel free to call briefly. We have this set twice, as well as other models such as the Schechtl MAX 200 (2.5mm) or MA 200 (2mm). The current net new price for both machines can be seen in the photos. You will receive an invoice with VAT shown separately. I can arrange shipping by freight forwarder if desired; a forklift is available. Free loading as shown in the pictures. Godpfx Acswfzztjijiu Inspection and testing are possible by prior telephone arrangement. Payment in cash upon collection – if there is anything else I can do for you, please call me briefly – thank you. Collection should take place within 8 days after the end of the auction. Item number:

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch Gisdswf Hghepfx Aciju • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines Gjdpjlbilvsfx Acijiu • maximum free space for material bending thanks to the F-geometry for the bending beam • Possibility to make omega profiles without additional tools • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/100 mm and 24/100 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: new, Year of construction: 2026, Quick reverse movement, high cutting capacity with low power Strong steel welded frame structure Maintenance-free guides and bearings. Operating pedal, safety buttons Front material support up to 920 mm Gijdpjl Exypjfx Acieu 5m 32Amp cable to power the machine CE certificate Automatic stop with digital position readout, length 0 - 750 mm with pneumatic sheet support system with rear material pick-up compressed air connection required min. 6 bar

Condition: new, Year of construction: 2026, • efficient, quiet and powerful mechanical machine • fast processes as in the case of MAX and MAB machines • Possibility to make omega profiles without additional tools Giodpfjlbimaex Aciou • 1 top bar 20°, radius 1 mm, 66/24 mm • 1 bending bar 10/68 mm and 24/68 mm • operating pedal • soft start of the bending beam • mechanical stop with a working length of 6-1000 mm • 32 A plug + 5 m power cord for EU • supply voltage: 3 x 400 V, 50 Hz for EU Thickness of bent sheet 1.5 mm steel sheet for 3000 mm length

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Gjdpfx Ajyviwqocijiu Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: good (used), Year of construction: 2007, control type: manual, You are bidding here on: a branded machine - folding bench, from a very reputable and well-known manufacturer - Schechtl. Godpfsytz A Eex Acijiu Device features: - Schechtl HA folding bench - Rail bends cleanly – test possible - Degree indicator - Bending length approx. 310 cm - Sheet thickness: 1.5 mm for steel – more for aluminum, zinc, etc., up to 2 mm - Standard rail - Foot closing device - Sheet support - Optional roller shear with rail – see photos - 2024 price list (net) – prices are now significantly higher Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing – including folding benches, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, accessories (beading devices, roll sets for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. Please don't hesitate to contact me if you have any questions. You will receive an invoice in accordance with § 25a UStG – VAT is included in the invoice amount. 2024 price list – prices have already increased noticeably. Differential taxation applies. Free loading possible – weight approx. 2,000 kg. Inspection and testing are possible and welcome by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise, we are happy to advise you. Collection by the buyer themselves (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: folding bench HA 310.

Condition: excellent (used), Schechtl HBM 310 Gsdpfx Acoymz Rieioiu The machine is equipped with: -a foot pedal -10 mm insert rail -a sheet metal support table (optionally also a back gauge) -Capacity: 1.0 mm steel sheet (1.50 mm aluminium, 1.25 mm copper, and 2.50 mm zinc) -Working length: 3100 mm -Weight: approx. 1,480 kg

Year of construction: 2001, condition: ready for operation (used), Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible. Gsdsx Hz Nyepfx Acisiu

Condition: good (used), Year of construction: 2017, You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MAX 200 Testing possible Degree indicator Bending length slightly over 2m Sheet thickness 2.5 mm steel – sheet – aluminum, zinc, etc. Standard die – radius for aluminum, zinc would be optional, as would an extension and special die! Foot pedal for operation Giodpfx Acezb I I Rjisu Optional depth stop Optional sheet metal shear, 2m, 3mm available (offer as a set possible) We also have Schechtl MSB 200 - 3mm, Schechtl MA 200 - 2mm, Schechtl HA 200 - 2mm RAS (rectilinear abrasive saw) with 2m - 2mm, segmented, and many more from 1m to 6m. Sheet metal shear HT 200 or sheet metal shear Schröder electric 2m - 2.5mm would be optional. Important! Optionally, you can find and purchase many machines and machine accessories, such as various dies, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, slitting and profiling machines – accessories (beading attachment, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts in stock from many top manufacturers in our shop. I am always available to answer any questions. You will receive an invoice with VAT shown. Free loading is possible – weight approx. 2000 kg. Inspection and testing are possible and welcome after arranging an appointment by telephone – 0175 248 1975. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you on 0175 248 1975. Collection by the buyer himself (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approximately 3 minutes from the A3 and A81 motorways.

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm Gjdpfx Ajwiri Ascioiu 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), You are bidding on: a high-quality plate shear and bending brake from a very good and well-known manufacturer – Schechtl. Features of the machine: Plate shear HT 200 Capacity: 1.25mm steel, aluminum, etc. Cutting length: slightly over 2m (blade in top condition, see photos; original lettering still present, which may fade after frequent cutting) Back gauge Light bar with LED for cut line illumination Adjustable front support Bending brake KS – Capacity: 1mm steel, aluminum, up to approx. 1.5mm Bending length: slightly over 2m Foot pedal Optional: back gauge or beading tool Attachment rail Round dies and other dies According to §25a UStG The machines are in good used condition and are ready for immediate use; they come from a private collection. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything related to sheet metal and steel processing, including bending brakes, plate shears, drilling machines, slitting and profiling machines, accessories (beading equipment, round dies for gutter production, back stops, etc.), and other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice according to §25a UStG, which includes the value-added tax – differential taxation. Free loading is possible – weight approx. 750 kg and 650 kg. Inspection and testing are possible and recommended after scheduling an appointment by phone. Giedpfey T H Nxox Aciju Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Bending brake KS 260504 & HT 260505

Condition: good (used), You are bidding here on a branded guillotine shear and folding bench from a very reputable and well-known manufacturer – Schechtl. Device specifications: Guillotine Shear HT 200 - Capacity: 1.25mm steel, aluminum, etc. and more - Cutting length: just over 2m - Depth stop - Front support, extendable Folding Bench - KS model – Capacity: 1mm steel, aluminum and more (up to 1.5mm) - Bending length: just over 2m - Foot-operated closer - Optional depth stop or beading attachment Gijdoyw Si Eopfx Aciju - Round rollers and additional guide rails included - Sale according to §25a UStG Optionally, I offer the possibility to purchase a segment bending bench from the top manufacturer Cidan – likely the market leader. Cidan Machinery also includes Thalmann (top manufacturer of long folding machines) and Forstner (leading slitting line manufacturer). This is the heavy-duty version – 1m / 2mm steel - Aluminum and more significantly higher capacity - Triple-segmented - Angle display - Foot-operated closer - Storage box Note: The segment bending bench can be purchased in addition to any of my machine sets, but will not be sold separately. Additional price available upon request. The machines are in good and clean condition and ready for immediate use. They come from private ownership. Important: Optionally, you can find and purchase many machines and accessories for sheet metal and steel processing – such as folding benches, guillotine shears, drill presses, roll bending machines, slitting and profiling machines, accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from leading top manufacturers in our shop. If you have any questions, I am always available to help. You will receive an invoice according to §25a UStG. The invoiced amount includes VAT (differential taxation applies). Free loading available – weight approx. 750 kg and 650 kg. Inspection and testing by appointment via phone is possible and encouraged. Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should occur within 10 days after the auction ends. Location: 97249 Eisingen, approximately 3 minutes from motorway A3 and A81. Item number: Folding Bench KS and HT

Condition: good (used), You are bidding on: a high-quality shear from a renowned manufacturer – RAS – and a press brake from Schechtl. Device features: Sheet metal shear Cuts sheet metal up to 1.5 mm thick (steel, aluminum, and slightly more – see nameplate). Standard mechanical shears only manage 1.2 mm. Cutting length: slightly over 2 m With adjustable back gauge, 500 mm Front support Weight: see picture Press brake Schechtl KS Bending length: slightly over 2 m Sheet metal thickness: 1 mm, and aluminum, zinc, etc., slightly more Thin and wide front gauge Top tooling (additional tooling available as an option) More tools and machines available in our shop. You will receive an invoice in accordance with §25a UStG (German VAT Act); the invoice amount includes VAT. Subject to differential taxation. Free loading possible – total weight approximately 1.6 tons. Inspection and testing are possible – and encouraged – after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer (or by a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approximately 3 minutes from the A3 and A81 motorways. Gjdpfx Acsy Taf Tjieiu Item number: Shear RAS 260502, Press Brake 260501.

Condition: good (used), You are bidding on: a high-quality sheet metal shear and bending machine from a very reputable manufacturer – Schechtl. Features of the machine: Sheet metal shear HT 200 Capacity: 1.25mm steel – aluminum, etc., and more Cutting length: slightly over 2m Back gauge Adjustable front support Bending machine KSV – Capacity: 1.5mm steel – aluminum, approx. 2mm Bending length: slightly over 2m Foot clamp Optional: back gauge or beading device Rounding rollers and additional dies In accordance with §25a UStG The machines are in good, used condition and are ready for immediate use; they come from a private collection. Important! Optionally, you can find and purchase many machines and machine accessories in our shop, such as various dies, back gauges – everything needed for sheet metal and steel processing, including bending machines, sheet metal shears, drilling machines, rounding machines, slitting and profiling machines – accessories (beading device, rounding rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers. I am always available to answer your questions. You will receive an invoice in accordance with §25a UStG, which includes VAT – differential taxation. Free loading is possible – weight approx. 950 kg and 650 kg. Inspection and testing are possible and welcome after scheduling an appointment by phone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Giedpey Tafyofx Aciou Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 highways. Item number: bending machine KSV 260506 and HT 260507.

Condition: good (used), You are bidding on: a branded folding machine from a very reputable and well-known manufacturer - Schechtl Device features: Gjdpfxjy Rtb Aj Acijiu Schechtl KSV folding machine – reinforced model Rail bends cleanly Angle display Bending length just over 2m Sheet thickness 1.5 mm – suitable for aluminum, zinc, etc., more than 2 mm possible Standard rail - radius for aluminum, zinc is also available as an option Round rolls as shown in the picture Optional: depth stop 500, additional rails Schechtl guillotine shear Useful length 2m Sheet thickness 1.5mm – more for aluminum Depth stop 500 mm Extendable sheet support Optional: additional accessories and tools available, such as bead forming device, tube bars and holders, tools, etc. Matching manual guillotine shear also available, please request a price for the set if interested, I will then configure it for you. Important! Optionally, you can find and purchase many machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steel processing like folding machines, guillotine shears, drilling machines, round bending machines, slitting and profiling machines, accessories (beading device, round rolls for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers, all in the shop. I am always available for questions. You will receive an invoice with VAT shown separately. Free loading possible – weight approx. 950 kg and approx. 1000 kg Inspection and testing are possible and welcome by telephone appointment. Payment in cash on collection. Take advantage of our experience and expertise, we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97261 Güntersleben Item number: Folding machine KSV / Guillotine shear MT

Condition: used, functionality: fully functional, Year of construction: 1988, Schechtl guillotine shear Giedpfx Aey I Uulociju With signs of use, but operates flawlessly

Condition: ready for operation (used), Year of construction: 1955, gr. Working width: 2040 mm for sheets up to: 1 mm Weight: approx. 680 kg Space requirement: 2650 x 650 x 1180 mm Gijdpstgf Nkofx Aciou

Condition: good (used), Year of construction: 1991, machine/vehicle number: 18402, Offer 26114 Technical Data: Giedpoy D Rxrsfx Acieu - Bending operation is performed manually, assisted by counterweight - Clamping of the upper beam via side eccentric lever and foot pedal - Max. working width: 2040 mm - Max. material thickness St 40: 1.00 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of upper beam: approx. 70 mm - Max. adjustability of bending beam: 10 mm - Space requirement: approx. W 2800 x H 1200 x D 900 mm - Weight: approx. 520 kg - Various bending rails as depicted

Condition: good (used), I offer here a set from Schechtl Folding bench KS with foot closer and guillotine shear HT 150 Both have a capacity of 1.5mm iron - aluminum significantly more Gjdeudbzmepfx Acieiu Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)

Condition: good (used), You are bidding on: a branded machine – folding bench, from a highly reputable and well-known manufacturer – Schechtl. 2024 list price – €18,490 net (currently even higher). This machine is considered the best manual folding bench Schechtl offers – segment tooling can also be installed! Machine specifications: • Schechtl HA folding bench • Rail bends cleanly – test possible • Degree indicator • Bending length: just over 2 meters • Sheet thickness: up to 2 mm (steel), more possible with aluminum, zinc, etc. • Standard rail – radius rail for aluminum, zinc is also optionally available! • Foot-operated closing mechanism • Optional depth stop HT 200 guillotine shear or Schröder electric shear (2m - 2.5mm capacity) are optionally available Important! A wide range of machinery and machine accessories is optionally available, such as various rails, depth stops – everything related to sheet metal and steelworking: folding machines, guillotine shears, drilling machines, roll formers, slitting and profiling machines, as well as accessories (beading devices, forming rolls for gutter production, rear gauge, etc.), as well as additional hand tools and spare parts in stock from top manufacturers, all available in our shop. I am always available to answer your questions. You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 1450 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Gijdpfxex E U T Aj Aciou Payment in cash upon collection. Benefit from our experience and professional expertise – we are happy to advise you! Collection by the buyer (or by a carrier commissioned by the buyer) should take place within 10 days of the end of the auction. Location: 97261 Item number: Folding Bench HA 200

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program Gsdpfx Aox Hyhbecioiu • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: new, functionality: fully functional, Year of construction: 2026, Technical specifications: Working length: 4040 mm Overall length: 4858 mm Depth: 2592 mm Working height: 920 mm Total height: 1430 mm Weight: 3450 kg Maximum cutting thickness: Steel: 2.5 mm Aluminum: 4.00 mm Stainless steel: 1.5 mm Standard equipment: Gjdpfxsx Hykvs Acieiu ▪ Mechanical backgauge, range 0 - 750 mm, with pneumatic sheet support system; front or rear material discharge ▪ Required compressed air connection: minimum 6 bar ▪ 4 front support arms, 1000 mm, with T-slot and metric scale ▪ 2 front sheet supports, square bar type, positioned on the left and right sides of the machine, with T-slot and metric scale ▪ Blade clearance adjustment with scale ▪ Controller with digital readout (memory for 99 six-step programs) ▪ Rigid welded steel frame. Maintenance-free linear guides and bearings. ▪ Foot switch ▪ CE certificate NEW! Option to install a conical backgauge Advantages: Fast return stroke, high cutting capacity Rigid welded steel frame Maintenance-free linear guides and bearings.

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Gisdjx Ruphopfx Acisu Machine features: - Schechtl MA folding/bending brake - Bends cleanly – test available - Angle indicator - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Inspection and testing can be arranged by phone and are expressly encouraged. Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: used, functionality: fully functional, Year of construction: 2010, working width: 2,000 mm, sheet thickness steel (max.): 2 mm, sheet thickness stainless steel (max.): 1 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 2,030 kg, input voltage: 400 V, input current: 4 A, input frequency: 50 Hz, We are offering this used Schechtl MAX 200/CNC S-1000/1 folding machine, year of manufacture 2010. Year of manufacture: 2010 Model: MAX 200/CNC S-1000/1 Serial number: MA5726 Take advantage of this opportunity to acquire a high-quality folding machine from Schechtl. This powerful machine is ideal for anyone engaged in sheet metal processing who demands maximum precision and efficiency. Product details: - Model: Schechtl MAX 200/CNC S-Touch - Year of manufacture: 2010 - Condition: Used - Technical specifications: Bending length: 2,000 mm Steel 2.5 mm Gisdpfxeyxpc Es Aciou Aluminium 4.0 mm Stainless steel 1.5 mm Weight: 2,030 kg If you have any questions or require further information, please feel free to contact us by message or phone. "The machine is sold according to Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. From the time the machine is made available at the designated location, the buyer assumes all costs and risks, including loading, transportation, and customs formalities."