Used School Maschine for sale (1,928)

Condition: good (used), PRO-PEN marking machine, a stationary needle embossing device, and a portable device for on-site engraving. These devices are used to permanently mark workpieces with serial numbers, text, or identification markings: a needle strikes many small dots into the surface. Beneath the turquoise housing is the holder where a workpiece or nameplate can be secured. The marking head above it embosses text and numbers into the surface. Nljdpfx Aioz N Af Re Ajh We sell both devices together.

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. Nlodoi Am Ukopfx Ai Aeh This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Model: MEM 46 MG Nledpfoznmgqsx Ai Aeh Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity The line can be inspected by appointment. Additional photos and videos are available upon request.

Condition: new, Jack Z7 Powerful Triple Feed The Z7 features synchronized movement of the feed dog, needle, and presser foot – specifically designed for heavy-duty materials such as car seats, steering wheels, upholstered furniture, bags, and mattresses. Precise fabric guidance and consistent stitch quality, even under maximum load. Artificial Intelligence An advanced AI chip instantly recognizes changes in material thickness and resistance and transmits this data directly to the motor. This automatically increases the piercing force and torque – for smoother sewing and maximum efficiency. Thickness Sensor The integrated sensor detects differences in fabric thickness and automatically activates the second alternating presser feet and the additional thread tension system – for perfect seams from start to finish. Dual Alternating Presser Feet Two adjustment knobs control the dual alternating presser foot system, which operates automatically or manually, depending on the detected fabric overlap or thickness. Additional Thread Tension System A second thread tension device can also be activated automatically or manually to adapt precisely to the fabric layers and ensure optimal tension. Dual Stitch Length Function When sewing corners or dense seams that require shorter stitches, the Z7 automatically switches via a button press – no manual readjustment is necessary. Touchscreen Control Panel The intuitive touch panel with voice guidance and symbol display enables quick activation or deactivation of functions such as backstitching, presser foot lifting, thread trimming, and more. Holding down a button accesses the extended function configuration. Electronic Handwheel Precise micro-adjustments are possible with the integrated digital handwheel – half stitch with a single click! Function Buttons Ergonomically mounted on the machine head; one button can be individually programmed via the control panel. Nedpfoz I Tfdsx Ai Ajlh 850W High-Performance Motor The most powerful motor in its class – with 13% more power than comparable triple feed machines. Pneumatic Presser Foot Lifter Equipped with a dual, alternating pneumatic presser foot lifting system for greater efficiency and comfort. XXL Hook System Suitable for thick threads and long seams – with a 32 mm hook, 73% larger than standard 2X types. Guarantees durability and maximum performance.

Condition: used, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet Nodpovcqzrefx Ai Aelh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external Njdpfxovppxps Ai Aolh connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: new, Year of construction: 2026, Dosing ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml Volumetric filling Under-surface filling possible Special "Anti-Drop" device Adjustable filling nozzle Pump and filling nozzle made of stainless steel AISI 316 L Automatic cap application Stepless torque adjustment of the screwing system Closing system for plastic caps Nlodpfjwpr Uxsx Ai Aoh Touch display control The products can come from the food, cosmetics, pet food, oils, chemicals and other industries (always subject to technical evaluation). The pouches are manually hung into a special rail feed system. Then the machine transports the empty pouches into the star. There, the pouches are volumetrically filled, the caps are automatically applied and then automatically closed. The torque is adjustable. The machine is compact and very versatile. Also available as a semi-automatic monoblock.

Condition: new, Year of construction: 2026, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Nlsdpfx Asu Ia E Ioi Aeh Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Year of construction: 2025, condition: like new (used), Medium screening 0-20/25 mm The installed screening shaft with a disc spacing of 15 mm is the most popular and frequently purchased screening line. Suitable for screening topsoil/humus, with smaller stones of -20/25 mm included in the fraction. The stones maintain soil permeability and stability, reducing moss formation. Mixing in compost, sand, or substrate turns dirt into new revenue. Disc spacing 15 mm – in a single operation with screening – works excellently with a Terra-Star. Screen fraction: 0-20/25 mm Wheel loader mounting is installed but not included in the price. On request, we supply the separator with adapters for excavators and wheel loaders. For excavators from 4t For wheel loaders from 3t No leakage oil connection necessary Series: TSE.083.210 Nledoyfwbzopfx Ai Aoh

Year of construction: 2023, condition: used, Wolf bucket separator TSP.124 is designed for tough continuous operation on construction sites, storage yards, or landfills. The bearings are maintenance-free, and the chain casings contain fluid grease, which is distributed to all areas by the movement of the bucket and the running chain, ensuring constant lubrication. Therefore, the Terra-Star never needs to be relubricated and is maintenance-free. The machine is equipped with M80X mixing shafts, and the tools are hardfaced with armored wire in the wear zones. An OQ70/55 adapter is installed, although other adapters can also be mounted. Combined use with excavators and wheel loaders is possible without difficulty. The adapter is not included in the price. For excavators from 18 t Nedpfxjyf Aqne Ai Aelh For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 - 77 m³ / h Leak oil connection required: 1 Series: TSP.124.096

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134 used, year 2025 Maintenance-free, screening line 0-20/25 mm, star discs TA 15mm Star discs armored Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also works with moist soil. Mixing in compost, sand, substrate, etc. in one operation during screening is easily possible. Screening of topsoil, construction debris, gravel. Refilling of construction pits and cable trenches, etc. Shafts for other grain sizes or tasks can also be installed—ask us for details. Fitted with OQ65 Price is without adapter plate For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Required leakage oil connection: 2 Series: TSC.134.012 Nodpfx Aisyf Arxj Ajlh

Year of construction: 2025, condition: used, List price €34,000 Breaking up, crushing, mixing particle size 0-60/80 mm For soil conditioning, mixing in lime, stabilizing agents, sand, compost, and other soils. Crushing and breaking up soil clods, separating stones, branches, roots, etc. Particle size 0-60/80 mm Aerating, crushing, shredding, turning biomass, organic waste, and compost For lime application, we also offer a binder spreader in our range, available with weighing system. The separator comes from a short-term rental and shows minimal signs of use. Price without adapter. The surcharge for the lightly used OQ70/55 is €4,250 Nlodsyf Ar Sjpfx Ai Ash For excavators from 16 t For wheel loaders from 8.5 t Throughput: up to approx. 65 m³/h Drain oil connection required: 1 Series: TSC.154.326

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, the machine delivers an enormous throughput with its 4 shafts! Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc., while simultaneously crushing soil clumps. Aerating, shredding, tearing, turning biomass, organic waste, and compost, while simultaneously separating branches, roots, etc. that cannot be crushed. Crushing easily breakable stones in construction debris such as pumice, bricks, Poroton blocks, while simultaneously separating the chunks. Larger and harder parts remain in the separator. Feeding lumpy soil to a screening plant reduces waste and increases throughput. Njdjyf Au Hspfx Ai Aslh Price without adapter! For excavators from 24 t For wheel loaders from 13 t Weight in kg: 2300 Throughput: 64 - 95 m³/h Leak oil connection required: 1 Series: TSP.154.128

Year of construction: 2025, condition: used, Terra-Star Powerline TSP.154, cutting width 1500 mm, this machine delivers enormous throughput thanks to its 4 shafts! Nlodpfxoyf Avde Ai Ash Mixing in lime or mixed binders for soil drying, blending with compost, sand, other soil types, etc., with simultaneous crushing of soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost, while simultaneously separating out branches, roots, etc., that cannot be shredded. Crushing brittle rocks in construction debris such as pumice, bricks, Poroton, while simultaneously separating the fragments by size; larger and harder pieces remain in the separator. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter! Suitable for excavators from 24 t For wheel loaders from 13 t Weight (kg): 2300 Throughput: 64 - 95 m³/h Leakage oil connection required: 1 Series: TSP.154.132

Year of construction: 2018, condition: used, The separator is from a well-known customer who has vacated the storage area where it was previously in use. With the installed screening discs, you achieve a grain size of 0-45/50 mm. Mixing in of additives is also possible in the same operation. The separator breaks up clods of soil and separates stones, roots, and branches from the reusable soil. When used as a feeder for a screening plant, performance increases by approximately 30% and waste/screen overflow is reduced by 60%, as the clods are already broken up. Other shafts can also be installed in the separator at any time. Conversion time: 40-60 min (patented shaft coupling) New prices: Mixing shafts M80X, grain size 0-60/80 mm: €10,567 Mixing shafts with block disc BS252, grain size 0-45/60 mm: €14,066 Used units, if available, correspondingly cheaper. An overflow plate is installed to prevent soil from spilling onto the wheel loader and to increase capacity by about 1/3. Included in the price is also the adapter for Volvo L50-120 type wheel loaders. Nodpfx Asyf A Erei Aelh Further technical information can be found in the datasheet in the images or on our website. For wheel loaders from 15 t Weight (kg): 3450 Drain line required: 1 Series: TSP.263.001

Condition: used, functionality: limited functionality, gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 20,000 kg, number of seats: 1, first registration: 01/1992, Year of construction: 1992, machine/vehicle number: 20412, Equipment: additional headlights, cabin, parking heater, We offer this used Mannesmann Demag V 73 mobile crane, year of manufacture 1992. Type: V 73 Chassis number: 20 412 Year of first commissioning: 1992 Permissible total weight: 20,000 kg Permissible front axle load: 10,000 kg Maximum lifting capacity: 14 t Maximum outreach: 13 m Last inspection: 2023 The load moment limiter is not operational. If you have any questions or require further information, please feel free to send us a message. Njdpfx Asyi D Ddoi Aolh

Condition: used, Year of construction: 2006, operating hours: 100 h, functionality: fully functional, Profi Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 operating hours! Nledjylxmfepfx Ai Ash Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from quality manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. It is therefore in an almost mint technical condition and shows hardly any signs of wear on the mechanical components. Originally designed for cutting chip mats, this machine’s robust construction and versatile PLC control make it suitable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical highlights & features: Condition: Nearly new (max. 100 operating hours). Format: Maximum cut length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and winder for fully automatic material flow from roll to roll or roll to format. PLC control: Professionally programmed, with a choice between manual and automatic operation. Material handling: Automatic gripper feed positions material precisely in the end position, with integrated edge removal system for perfectly clean edges. Operation: Intuitive control via display, foot switch, and optical/acoustic production completion indicators (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring. Versatility: This machine is a true all-rounder for any rolled material that needs to be cut to precise sheet sizes or strips. Its stable construction with a high-quality aluminum profile system ensures maximum rigidity. Complete documentation available, including process protocol, wiring diagrams, and technical drawings. The machine can be inspected and tested under power by appointment. For exact technical details and questions about fields of application, please feel free to contact me personally. Contact: Phone: 05427 9423 20

Condition: used, mileage: 599,933 km, power: 134 kW (182.19 HP), first registration: 06/2009, fuel type: diesel, empty load weight: 6,500 kg, maximum load weight: 5,490 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 6,000 mm, loading space width: 2,400 mm, Equipment: cabin, trailer coupling, * German vehicle * Condition as per photos * Hydraulic extra-long ramps * Length 3.20 m * Reinforced ramps * Electric heavy-duty winch * Cable remote control * Loading length 6.00 m x 2.40 m * Loading height 1.00 m * Recessed DIN lashing rings * Storage box * Spare wheel holder * Spare wheel * Tow hitch (ball head) * Towing capacity 3,300 kg * Work lights Njdpfsyid S Ejx Ai Ajlh * Rotating beacon * Cab with 3 seats * 6-speed manual transmission * Electric windows * Heated electric mirrors * Electric engine brake * Stereo CD player * Wheelbase 4.50 m * Gross vehicle weight 11,990 kg * Curb weight 6,500 kg * Payload 5,490 kg If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to avoid any misconceptions regarding their condition and suitability. Inspection and testing are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to change, prior sale, and errors.

Year of construction: 2024, condition: like new (used), The separator is designed for screening topsoil / humus. With the Terra-Star, screening and blending of compost, sand, or other materials can be accomplished in a single operation. The four shafts provide impressive throughput in screening and mixing. The shafts are equipped with star discs made from wear-resistant HX 500. In case of wear, re-welding can be performed at any time. The Terra-Star is a modern system designed to give you a foundation for future adaptation, today. Changing to other carrier machines is always possible, as all connections are bolted. Converting the shafts for different applications is also feasible at any time—from screening shafts to mixing shafts or other combinations. Required adapters for excavators or wheel loaders are available from us upon request. For excavators from 2.2 t For wheel loaders from 1.8 t Weight in kg: 250 Throughput: 6-8 m³/h Nledpeya Uuzjfx Ai Ajh No leakage oil connection required Series: TSE.054.087

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts Nljdpoyb I Azjfx Ai Aoh If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Manufacturer: Gläsner Plant No.: 5V 3028 055 Voltage: 400 V Frequency: 50 Hz Nedpfjyddufsx Ai Ajlh Power: 2.2 kW The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.

Condition: excellent (used), Year of construction: 2025, Demonstration machine Strapping machine, Easy Strapper model Nodoydf Duopfx Ai Ajlh 12mm strap Frame size 850x600

Condition: used, mileage: 811,100 km, power: 217 kW (295.04 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 7,800 kg, maximum load weight: 10,200 kg, overall weight: 18,000 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,650 mm, loading space width: 2,500 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, tail-lift, trailer coupling, Renault Midlum 300.18 4x2 Machinery Transporter First registered: 2/2012 881,100 km Short cab Manual transmission Air conditioning Trailer coupling Powerful 300 hp 6-cylinder engine with 7146cc displacement Air suspension front and rear Tires 305/70 R22.5, approximately 50% tread Flatbed: 6650mm (5750mm straight + 950mm angled) Ramp, split: 3550mm (2450mm + 1100mm) Loading width: 2500mm Loading height: 1100mm Winch Permissible total weight: 18,000 kg Unladen weight: 7,800 kg Payload: 10,200 kg Nodpfxoz Hckas Ai Aolh Export/net price: 16,900 Euros All information without guarantee, subject to change.

Condition: used, maximum load weight: 1,885 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 01/2027, loading space length: 3,000 mm, loading space width: 1,500 mm, Koch trailer with loading ramps / TÜV valid until January 2027! ---- * Manufacturer: Koch * First registration: 01/2015 Nedpfx Aijz I H Ais Aslh * Gross vehicle weight: 2,600 kg * Unladen weight: 715 kg * Payload: 1,969 kg * TÜV valid until January 2027 * Equipped with loading ramps * Price: 1,900 Euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is provided without warranty; errors and prior sale are reserved.

Condition: ready for operation (used), Spindle for milling machine, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nledpoz Ivxmsfx Ai Aeh