Used Scm Sandya for sale (586)

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Ksdpfx Afex A Tgyozjwt Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: good (used), Year of construction: 2017, In good technical condition. Year of manufacture: 2017. Suitable for dry deburring and disinfection of metal surfaces. Burr removal. Oxide removal on edges and surface finishing. Manufacturer: SCM Group spa Italy. Model: DMC M950. 400V, 71A. Machine weight: 2260 kg. Ksdpfxox Ttn Us Afzowt

Condition: used, functionality: fully functional, Edgebanding unit End trimming unit Ksdpfx Afoxfuh Dszjwt Trimming unit 2nd trimming unit Sanding unit

Condition: new, Multipurpose combination machine with aluminum sliding table for sawing, milling, surface and thickness planing, and optional long-hole boring Torsion-resistant steel and cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodized aluminum sliding table, 10-year SCM warranty on slideway wear Large crosscut frame with extendable aluminum telescopic fence and flip stops Combination saw and mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for consistent timber feed during thickness planing Four spindle speeds, manually selectable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Fitted with the proven million-fold SCM ball contact system Consistently smooth operation due to hardened and ground guides Not susceptible to dust and dirt thanks to minimal contact point between ball and trapezoidal rail The extraction ports for surface and thickness planing are located on the same (right) side, so the same extraction hose can be used for both planing operations. Helical steel infeed rollers for constant and even workpiece feed Massive anti-kickback pawls for operator safety 3-knife cutterblock ensures optimum planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Cutting width at rip fence: 800 mm Saw shaft speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs Table dimension: 300 x 450 mm Min. / Max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle speed: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Weight: 430 kg OPTIONS: - Professional fences EUR 300.-- Saw fence with quick lock and micrometric adjustment Surface planer fence 90° ÷ 45° continuously adjustable - Scoring unit incl. blade EUR 292.-- Kjdpfxeiiyppe Afzswt - Handwheel with digital readout for thickness table positioning EUR 129.-- - Mobility kit EUR 119.-- - 2 additional handwheels for unit adjustment EUR 45.-- - TERSA cutterblock, diameter 72 mm EUR 212.-- - Xylent spiral cutterblock with 3 rows of knives EUR 717.-- - Aluminum long-hole boring device EUR 390.-- - 2 flip stops for crosscut fence EUR 150.--

Condition: excellent (used), Catalogue number 7288 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 7.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindle 2 and 3): 15 kW Spindle 3 with electric right/left adjustment 4) Top horizontal: 230 mm, 11 kW 4th spindle with electric up/down adjustment 5) Bottom horizontal: 230 mm, 7.5 kW 6) Universal: 230 mm, 360° adjustable, 11 kW - All spindles adjustable up/down, right/left - All spindles equipped with brake - Spindle diameter: 40 mm - Top infeed: 4 steel, toothed, powered rollers (incl. 2 double rollers) - Top outfeed: 3 smooth, rubber, powered rollers (incl. 2 double rollers) - Bottom outfeed: 2 rubber, powered rollers - Bottom side pressure: 3 units Kjdpox Syk Hsfx Afzewt - Variable feed speed adjustment - Pneumatic feed rollers - Feed motor: 3 kW - Electric adjustment of planing thickness - Body lifting motor: 0.37 kW - Infeed table length: 2,480 mm - Enclosed in safety cabin - Centralised table lubrication - Extraction port diameters: 130 mm, 140 mm, 4x125 mm - Dimensions (L/W/H): 4,960 x 1,760 x 1,700 mm - Weight: approx. 3,500 kg ADVANTAGES – Manufactured in Italy – 6-head configuration – Machine is in original paint (not repainted) – All spindles equipped with brake – Last spindle is universal – Used planer, in very good condition Original photos Net price: 54,900 PLN Net price: 13,070 EUR (based on 4.2 EUR exchange rate) (Prices may change due to exchange rate fluctuations)

Condition: used, machine/vehicle number: 007983, Position 1: Single Edgebanders SCM-STEFANI KDR Position 2: Panel Return Systems SCM-STEFANI KDR Ksdpfx Aswqndljfzewt

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, SCM edge banding machine, model K 201, CE mark, complete with control console, edge banding area for workpieces up to 3 mm material thickness and 45 mm material width, reinforced roller separation up to 3 mm, strip magazine, workpiece guidance via chain with roller top pressure, central adjustment of top pressure, frequency inverter, HF cross-cut saw unit, HF radius milling unit, motors with quick-change system, soundproof hood, digital glue temperature control, underfloor gluepot, glue application via roller dosing system, extendable roller rail, central extraction nozzle. Kodpfx Aeyath Hsfzjwt

Condition: used, Year of construction: 2012, functionality: fully functional, Condition: fully operational, well maintained, in production. Available immediately! SCM SIGMA IMPACT 87 panel saw, 2012 years, powerful, accurate, and reliable industrial panel saw designed for high‑productivity furniture and panel‑processing operations. Ideal for woodworking factories, cabinet manufacturers, and large-scale production. Technical specifications Cutting dimensions: 3200 × 2100 mm Main blade projection: 87 mm Kwjdpjycg Rmofx Afzst Main blade diameter: 350 mm Main blade speed: 3900 rpm Main motor power: 5.5 kW Scoring blade: 1.5 kW, 6300 rpm, 160 mm Carriage speed: 6–30 m/min Pusher speed: 27–38 m/min Standard grippers: 5 Dust extraction ports: 3 × 120 mm or 1 × 150 mm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Manufacturer: SCM Model: superset nt Year of manufacture: 2022 Condition: very good Category ID: 858 Kwedpfoyapi Hex Afzet Type ID: 2293 Type: Moulder and Planer If you have any questions or need further information, please feel free to send us a message or call us.

Condition: new, Massive work table made of heavily ribbed cast iron Robust base frame constructed from welded steel Precision sliding table made of anodized aluminum Carbide guideways – for long-term precision and minimal maintenance of the sliding carriage Tilting cast iron saw unit with double segment guide Kwodpfx Ajit I Sbsfzet Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding table Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality panel frame & telescopic stop, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two steps (from above, table insert removable) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm): 140 with 400 mm blade Max. cutting height at 45° (mm): 100 with 400 mm blade Saw blade tilting range (degrees): 90/46° Manual saw blade lifting and tilting Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scoring unit motor power (kW) 50 Hz: 1.3 Scoring unit speed (rpm): 9,200 Panel cutting capacity (mm): 3,200 x 3,200 Cutting width for parallel cuts (mm): 1,270 Extraction port diameter (mm): 120, 60

Condition: used, machine/vehicle number: 007802, Max. panel width: 1000 mm Max. panel length: 2000 mm Kjdpfx Afexn Nf Njzewt Length of conveyor: 8200 mm Panel return for edgebander: Right

Condition: excellent (used), Year of construction: 1988, SCM F410 surface planer Ksdpox Uqaqjfx Afzswt Planing width: 410 mm Table length: 2,600 mm Number of knives in cutterblock: 4 pcs Long-hole boring unit is mounted on the machine

Condition: excellent (used), Year of construction: 1998, SCM S630 Thickness Planer Kwsdex Up Sljpfx Afzjt Planing width: 630 mm Motor: 5.5 kW 2 rollers in the table Electric height adjustment with digital readout We also have an SCM F410 jointer of the same type available, see my other listings.

Condition: excellent (used), SCM internships in excellent condition Kjdot Hkq Repfx Afzowt

Condition: excellent (used), SCM contura in excellent condition Kwsdpfot E T I Nex Afzot

Condition: used, Year of construction: 2007, Used Automatic Edgebander for sale! Manufacturer: SCM Kjdpfx Aoya Tv Rjfzowt Model: K1000 Year of manufacture: 2007 Status: dismantled and ready for transportation immediately! Location: Lithuania Equipment and technical specifications Edgeband thickness max 8 mm Panel thickness max 50 mm Thickness of coiled edgeband max 3 mm Workpiece length min 65 mm Feedrate max 18 m/min

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Kwodpfecr S Ecjx Afzet Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) Kwedpfx Afjhkz E Tezjt With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: new, Year of construction: 2025, Motorized thicknessing table stroke with two speeds Numerical display for working height Grey cast iron thicknessing table The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Noise and chip protection curtain at workpiece infeed and outfeed as standard Adjustable roller contact pressure Front infeed roller with helical toothing Pull-out roller with rubber coating Powerful industrial engine Equipment details Models TERSA with Tersa planer blade shaft Planer blade change in seconds When the machine is started, the planing knives are automatically clamped by centrifugal force - self-locking The blade projection adjusts automatically without using setting gauges Work table The work table is supported on four large trapezoidal threaded spindles, which ensure maximum stability in all working conditions Ksdpfsff Efaex Afzswt With electrical table adjustment as standard Due to the special lifting device, the table position is maintained even without locking Helical toothed steel feed rollers for a constant and even wood feed second, rubberized feed roller at the outlet Massive recoil protectors prevent the recoil of workpieces A 4-knife shaft ensures an optimal planing pattern Dimensions and weights Length approx. 1305 mm width/depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter thickness 150 m

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Ksdpfxeiidnfs Afzswt Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Kjdpfxoi Dphte Afzjwt Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Kwedpfx Afjhp Rc Iezot Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa Planer knife shaft Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Kwodpod Hx E Iofx Afzjt Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an Kwjdpfx Ajcnxayjfzjt

Condition: new, Year of construction: 2026, Maximum equipment for the professional. Multiple combination with TERSA cutterhead, miter cutting device and swiveling milling spindle. Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved with the scoring saw blade installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside High-precision sliding carriage made of anodized aluminum on hardened and drilled steel guide rails Large boom (1200 x 650 mm) with roller and extendable aluminum telescopic fence up to max. 3300 mm Sawing unit swivels from 90° to -45 Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds Right-left rotation of the milling spindle Quick change to thickness planer thanks to parallel opening jointer tables 2-stage feed in the thicknessing table Sharp toothed steel infeed roller for uniform wood infeed Three independent industrial motors With separate saw-parallel fence and separate feeder fence With lockable main switch Equipment details: Format fence Immediate control Boom Boom with angle-adjustable telescopic lay-off stop with graduation Sliding carriage with ball contact system made of anodized aluminum guides in hardened and ground steel F550S, 15% harder than conventional steel guides riveted and not glued light running, low noise and reliable 10 years HOLZKRAFT warranty on wear of hardened guideways cast iron double cradle saw unit height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts close to the saw blade, mounted on both sides height and inclination adjustable up to 45 standard scoring unit with separate scoring motor 0,55 kW double cradle scoring unit large-dimensioned swiveling double cradle milling unit made of cast iron Kedpscnxa Ssfx Afzewt milling stop heavy professional design the high quality cast iron fence is supplied with fine adjustment as standard 3-fold positionable for fast readjustment of the setting with fine adjustment via toothed rack, numerical display and aluminum fraise stop jaws Planer steel infeed rollers with helical teeth for a constant and uniform wood infeed solid backstops prevent the backstroke of workpieces 4-knife torsion shaft ensures an optimal planing pattern table lips for a quieter running Tersa planing cutterhead No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, which ensure high stability under all working conditions. Due to the special lifting device, the table position is perfectly maintained even without locking. Rip fence with fine adjustment and quick clamping stable round bar guide made of ground steel reversible aluminum ruler no measuring gap, guide rods are overlapping Separate dressing fence large professional design (1800 x 150 mm) 0-45° swiveling with quick adjustment stable round bar guide made of ground steel simultaneous opening Art: No. 5500557