Used Scm Multiflex for sale (645)

Condition: excellent (used), Year of construction: 2000, I sell the window angular centre SCM Multiflex. Moulding heads VIVALDI EU68mm. Cutting + Tenoning spinde right side / Tenoning side. 2 pcs. Profiling spindles + glass strip cutting machine left / Profiling side. Lhjdpfx Aehw Dfysfuol Available immediately.

Condition: excellent (used), functionality: fully functional, chain width 300mm cutting height 120mm Lhjdpfx Aozxpw Tsfuel max blades diameter 350mm variable regulated feeder manual regulation of pressure rolls manual regulation of shafts connection 380V

Condition: excellent (used), functionality: fully functional, cutting height (max.): 130 mm, total length: 2,000 mm, total height: 130 mm, cutting width (max.): 230 mm, total width: 230 mm, overall weight: 3,000 kg, SCM Superset 23 – Four-Sided Planer – 5 Heads – 230 × 130 mm – FOUR-SIDED PLANING MACHINE! Professional SCM Superset 23 four-sided planer, renowned Italian manufacture. The machine is equipped with 5 spindles, stepless feed rate adjustment via a frequency inverter, and electric thickness setting. A robust feed system and pneumatic roller pressure ensure stable and precise guidance of the workpiece. The planer is used and in very good technical condition. The machine is suitable for professional wood processing in carpentry workshops, sawmills, and for the production of structural elements, moldings, boards, and timbers. KEY PARAMETERS: - maximum workpiece width: 230 mm - maximum workpiece height: 130 mm - number of spindles: 5 - spindle diameter: 40 mm - stepless feed rate adjustment via a frequency inverter - electric thickness setting - pneumatic roller pressure - central table lubrication - long infeed table: 1980 mm - machine enclosed in a cabinet SPINDLE ARRANGEMENT: Bottom horizontal spindle - working width: 230 mm - motor power: 4 kW Right vertical spindle - working height: 130 mm Left vertical spindle - working height: 130 mm - total power of the 2nd and 3rd spindles: 7.5 kW Top horizontal spindle - working width: 230 mm - motor power: 5.5 kW - electric up/down adjustment Bottom horizontal spindle Lhedpfx Afjzzx Iyouel - working width: 230 mm - motor power: approximately 5.5 kW All spindles have adjustment in the appropriate directions: up/down and left/right. FEED SYSTEM: - 6 top metal, toothed feed rollers - double top discharge roller – smooth, rubber - 2 bottom rubber pull rollers - 2 bottom side pressure rollers - pneumatic roller pressure - stepless feed rate adjustment via a frequency inverter - feed motor: 3 kW OTHER TECHNICAL DATA: - body lifting motor: 0.37 kW - length of the infeed table: 1980 mm - central table lubrication - dust extraction port diameters: 5 × 130 mm - machine dimensions: 3600 × 1800 × 1750 mm - weight: approximately 3000 kg - country of manufacture: Italy - condition: used, very good Gross price, VAT margin. The machine is available from JBS Maszyny Stolarskie. We invite you to contact us by phone. You can view and inspect the machine before purchasing. We also assist with organizing transportation. JBS WOODWORKING MACHINERY Sale of professional woodworking machines

Condition: like new (used), Year of construction: 2015, spindle diameter: 30 mm, pivoting range: 130 °, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 10,000 rpm, total length: 1,000 mm, total width: 1,000 mm, total height: 1,200 mm, Equipment: CE marking, documentation/manual, SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015 – LIKE NEW! SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015. For sale: a professional SCM Formula T60I undercut spindle moulder from the renowned Italian manufacturer, SCM Group. This machine, manufactured in 2015, is designed for demanding carpentry and production applications. Its robust construction, weighing 624 kg, ensures stable operation and high machining accuracy. Lhsdpfxjzp Hx Ne Afusl TECHNICAL SPECIFICATIONS: - Spindle tilt from 90° to 135° - Smooth spindle speed adjustment from 3,000 to 10,000 rpm - Powerful 5.5 kW motor - Solid cast iron worktable - Professional design for continuous operation - Precise adjustment settings - Machine ready for operation - Machine tested (video of the machine in operation available on TikTok and YouTube – jbsmaszyny) Technical data: Manufacturer: SCM Group Model: Formula T60I Year of manufacture: 2015 Power supply: 400 V Motor power: 5.5 kW Spindle speed: 3,000 – 10,000 rpm Spindle tilt: 90° – 135° Weight: 624 kg You can test the machine on-site. Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. WHERE CAN YOU SEE OUR MACHINES? JBS STOLARSKIE MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: AA1/016854, functionality: fully functional, 3-AXIS DRILLING & MILLING CENTER Make: SCM Model: TECH Z2 Comp R0410.01 Serial No.: AA1/016854 Year: 2012 (Photos taken before overhaul, functional testing, and cleaning) MAKING CAPACITIES: - Max. workpiece height (thickness): 160 mm - Max. workpiece length: 2700 mm Dual station: 1210 mm Lsdpfx Afev Tzrveuohl - Max. workpiece width: 1300 mm Movements: - X-axis travel: 3060, Y-axis: 1735, Z-axis: 250 mm - Max. travel speed (vector: 60 m/min) MACHINE COMPOSITION: - 6 Pneumatically clamped beams for suction cups, e.g., 120x120 or 55x120 mm - Unit Automatic lubrication - Mounted unit on the neck of the sign composed as follows: (X movements by rack and pinion, Y movements by screws and bushings; high-quality precision linear guides with automatic lubrication) • 11 kW (15 HP) milling/routing unit: - Rotation 1500 - 24000 rpm, variable speed, right/left direction - Tool holder connection type HSK63F, ER32 collet - Onboard magazine for 8 tools - Perimeter extraction hood • 18-chuck drilling unit: - 12 independent vertical chucks (8 in the X direction, 5 in the Y direction) - 6 horizontal chucks (4 in the X direction, 2 in the Y direction) - Center distance between chucks 32 mm for M10 / Ø11 mm drill bits - Rotation speed 4000 rpm - Pneumatic vertical stroke 60mm - Perimeter extraction hood • Integrated unit for groove sawing and milling - Ø120mm blade, 6mm thick - 6000 rpm speed - 60mm pneumatic vertical stroke • Mobile console on a jib with a control PC: – Windows XP operating system – 17" LCD screen – Ethernet connection – Xilog and Maestro machine interface software OTHER FEATURES: - 400V overall power supply. Three-phase + N+T 50Hz IN37A - 12 kW electro-spindle motor - 2.2 kW drilling/grooving motor - 1 x 2.4 kW vacuum pump: 90-108 m3/h - Pneumatic supply >=7 Bar - Suction: Suction inlets: 2 x Ø 150 mm (1 x Ø 200 mm inlet using the installed bypass) Recommended speed: 30 m/s - 3400 m3/h - CE-compliant machine with safety zone and light barrier Operating dimensions with safety zone: see documentation excerpts Shipping dimensions: to be specified when preparing the equipment Estimated total weight: 2200 kg Machine supplied with instruction manual and software, spare parts list, electrical and pneumatic diagrams. Please contact us for the supply of consumables, accessories, and/or vacuum systems. Machine serviced and brought into compliance, with quality control and dynamic functional testing. 3-month warranty and compliance certificate. Available from stock, subject to prior sale. Prices excluding VAT. Delivery and additional services upon request.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Wide belt sander SCM Sandya 40 M1 Year of manufacture 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm Lhsdpfx Ajtttafefuol 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disk brake Rubber-coated pressure rollers Automatic carpet centering Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Condition: good (used), Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Lhodpfx Afjytn U Ieuol Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 2000 h Weight kg 2200

Condition: ready for operation (used), Year of construction: 2012, complete production line from SCM Technical details: Workpiece length 250 - 3,100 mm Productivity 180 parts/shift Feed rate, continuously adjustable, max. 20 m/min Automatic central lubrication system CE conformity marking 2 slot spindles with HSK85 tool holders 2 profiling spindles, right, with HSK85 tool holders 2 profiling spindles, left, with HSK85 tool holders 3 spindles, horizontal 8 tool changers, 96 positions Space requirement approx. 30,000 x 15,000 mm Equipment of the system: 1 - Transverse conveyor SCM for feeding the planing machine 2 - Planing machine Superset NT 31 3 - Transverse conveyor SCM to the double-end profiler 4 - Double-end profiler SCM Multiten D 5 - Transverse conveyor SCM to the drilling machine 6 - Drilling machine SCM Fleximat Lhjdpfxsz D R S Ts Afuel 7 - Double-angle transfer with transverse buffer SCM TA 1/1 8 - Drilling machine SCM Fleximat 9 - Double-angle transfer with transverse buffer SCM 10 - Longitudinal conveyors 11 - Profiling machine SCM Winprof R 12 - Transverse conveyor SCM 13 - Profiling machine SCM Winprof L 14 - Transverse conveyor at the outfeed SCM

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Lsdpfxozq Ur Te Afuohl Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 Lsdszwf Ekspfx Afujhl documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: used, Year of construction: 2015, machine/vehicle number: AE/034366, functionality: fully functional, power: 6.6 kW (8.97 HP), input voltage: 380 V, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 3,200 mm, saw blade diameter: 380 mm, total length: 3,800 mm, total width: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used SCM SIGMA IMPACT 90 panel saw, year of construction 2015. Best Price: SCM SIGMA IMPACT 90 – CNC Panel Saw / Beam Saw Year of manufacture: 2015 Serial number: AE/034366 Condition: Used Technical specifications Ljdpfoz Dw Unjx Afujhl Cutting dimensions: 3, 800 × 3, 200 mm Main saw motor: 9 HP / approx. 6.6 kW Scoring saw motor: 2.5 kW Main saw blade diameter: 380 mm 3 front air-cushion tables 17" touchscreen Control software: SCM WinCut 12 Cutting optimization software: Ottimo Cut Top+ / Easy Cut CE compliant Professional CNC-controlled horizontal panel saw suitable for cutting chipboard, MDF, plywood and other panel materials. Machine is still functional and available for inspection in Latvia.

Condition: used, machine/vehicle number: 008704, Overall length: 3435 mm Overall width: 1100 mm Lhedpszq Uryefx Afujl Suction capacity: 5750 m3/h No of Filter sleeves: 60

Condition: good (used), Year of construction: 2007, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: scm, total height: 3,200 mm, total length: 5,300 mm, total width: 3,000 mm, overall weight: 4,500 kg, table length: 3,100 mm, table width: 1,250 mm, year of last overhaul: 2024, Equipment: CE marking, SCM Record 110 AL Prisma 5-Axis CNC Machining Center | Year of manufacture 2007 | Immediately ready for operation | Complete with tool package For sale is an SCM Record 110 AL Prisma, a powerful 5-axis CNC machining center from the year 2007. The machine was in continuous operation until disassembly and can, of course, be inspected and tested while powered on. It operates reliably and precisely and is ideally suited for furniture, interior design, stair and door manufacturing. A detailed video demonstrating its functionality is available on YouTube and shows the machine in operation for approximately 30 minutes. Included in the scope of delivery: ✔ SCM Record 110 AL Prisma 5-Axis CNC Machining Center, equipped with tools. ✔ Complete set of machine tools ✔ Tool magazine Lhodpfx Afjz Dq Tqousl ✔ Vacuum pump ✔ All vacuum cups ✔ Special vacuum cups for door processing (see video & images) ✔ Machine control PC ✔ All existing machining programs remain on the computer The machine is therefore sold complete and ready for operation. The PC from the office with PaletteCAD license can also be purchased. The video demonstrates, among other things: Manufacturing of a complete cabinet side Machining of a center panel Milling of an outer contour Milling of a rectangular pocket True 5-axis machining Creating an exact 90° internal corner using a 60° chamfering cutter The video impressively demonstrates the precision and technical condition of the machine. Technical data Manufacturer: SCM Model: Record 110 AL Prisma Year of manufacture: 2007 5-axis machining Vacuum table Tool changer Control PC included CE version Condition The machine is in good condition and was in daily use until disassembly. Inspections and a test run are expressly welcome after prior arrangement. Disassembly / Loading Approximately one week of lead time should be planned for the disassembly of the machine. We will, of course, assist with the organization of shipping/transport, which can be arranged and commissioned if required. The costs will be borne by the buyer. We can also disassemble the machine and load it for you. Sold on behalf of a customer by Bima Maschinen. The machine is located in Luxembourg, near the German border. An invoice as an intra-community supply is possible if the location is outside of Luxembourg, within the EU.

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Ledpfxjz Ehvxs Afushl

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) Lodsz Ebzhepfx Afuehl ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, machine/vehicle number: 008700, X axis working area: 3050 mm Lsdpfxjzq Ur He Afushl Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 52 Total number of tool changer positions: 6

Condition: used, SCM M3 double edger, in good condition, 300 mm cutting width, 100 mm cutting height Ljdpfxjxlnpnj Afushl

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Lhjdpfx Afsz Aquheuol Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: AB00019454, functionality: fully functional, input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, For sale, a fully functional CNC drilling machine, model SCM Morbidelli CX210, with high axis travel speeds, a very large drilling head, and a drilling head for Blum fitting spacing, as well as a saw for creating grooves. Very fast drilling, without an electro-spindle. Specifications: Min./Max. element length mm 200/3,050 Min./Max. element width mm 50/1,300 Min./Max. element thickness mm 8/95 Max. element weight kg 70 Max. feed rate in X-Y-Z axes m/min 70-40-30 DRILLING HEAD F31LTC Lhsdszz Syvepfx Afuol Vertical spindles pcs. 21 Horizontal spindles in X axis pcs. 6 Horizontal spindles in X axis pcs. 4 Spindle speed rpm 4,500 Fixed saw in X axis, diameter mm, rpm 125 5500 Max. saw thickness mm 6 Motor power kW 2.2 ADDITIONAL OPTIONS Inverter for the drilling head to adjust the drilling head speed in the range of 3000-8000 rpm Drilling head for fittings with 45/9.5 spacing "eye-M PRO" console integrated with PC Device allowing CNC operation via provided programs. Supplied with: - system for monitoring machine status via an LED light bar - industrial PC: Fanless design, IP 53 protection - Intel I7 processor – 2.80/3.80 GHz - 8 GB RAM – DDR4 - 256 GB SSD hard drive - Windows 10 IOT – 64 bit program - QWERTY keyboard, English version - 3-function wired mouse - Ethernet RJ45 port - USB port: 1 available - nominal operating temperature +5°C / +35°C - color LCD monitor, 21 inches, full HD, 16/9 format, LED backlight, multi-touch system, 10-point Remote control Additional USB hardware key for the Maestro CNC program.

Condition: used, Combination jointer-planer machine Manufacturer: SCM LINVINCIBLE Type: 2200 Planing width: 50 cm Feed height: 20 cm 3-knife cutterhead 2 feed speeds Adjustable jointer fence Adjustable sliding rollers in the planer table Condition: see images, or refer to the item description. Parts can also be picked up on site. All dimensions are approximate. All information is provided to the best of our knowledge but without warranty. Subject to prior sale. Shipping costs are an estimate; they may vary depending on the distance and unloading possibilities. The items can be picked up on site or shipped at the buyer's expense. Lhedpfx Ajz Ef Ifsfuel The stated selling price is a net amount plus VAT. An invoice with VAT breakdown is included with the goods. Warranty basis: Due to wear and tear on used parts, the items are generally sold as defective – for spare parts – only to commercial businesses. By submitting his bid, the buyer accepts this as the basis of the purchase contract. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Ledex A E Tfjpfx Afuehl Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AH00001546, functionality: fully functional, operating hours: 6,898 h, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, height adjustment type: electric, feed rate X-axis: 22 m/min, actuation type: electric, total length: 7,000 mm, overall weight: 3,121 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, INTERIOR 46 DESIGN Ltd. – Ruse offers for sale: Ljdpozki Dksfx Afuohl SCM – Stefani MD straight-edge edging machine – manufactured in 2019. The machine was purchased new and used for 5 years in the production of custom-made kitchens. In perfect technical condition. Fully serviced and maintained by SCM Bulgaria. The machine is located in the SCM showroom in Varna. Inspection and testing on-site are possible.

Condition: used, Year of construction: 2016, We are offering this used SCM STARTECH CN drilling machine, manufactured in 2016. Year of manufacture: 2016 Serial number: AB/226922 Type: F004 Model: STARTECH CN The advertised price is €14,500 net (negotiable). Lhsdpfez Afdksx Afuol If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: AE00003516, grinding width: 1,370 mm, overall weight: 1,800 kg, grinding height: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 1,350 mm, - Wide-belt sanding machine DMC SD 70 RCS 135 - DMC SD 70 model, RCS 135 version First "R" unit with roller and second "CS" combination unit with roller/sanding pad - Working width mm 1,350 Min./Max. working height mm 4-170 Sanding belt dimensions mm 1,370x2,620 Main motor power kW (HP) 11 (15) Feed rate m/min 4.5/9 - 160/85 rubber-coated calibrating roller, diameter 160 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual adjustment of the working height Lodpfxozydafe Afuohl - Motor power, 1 unit: 11 kW (15 HP) - Electronic ammeter for the main motor to display current draw - Electronic display of the working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first unit - Rubber feed carpet, 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Carpet feed with two speeds 4.5 / 9 m/min with gear motor - Automatic carpet centering

Condition: used, Year of construction: 1991, Design: fixed Table size: 1200x730 mm Table height: 900 mm Spindle speeds: 3000/4500/6000/7000/10000 rpm Milling cutter diameter: 30 mm Spindle working length: 180 mm Spindle direction: right/left Ledpfx Ajz Ebplofushl Speed display: optical Automatic motor brake: mechanical foot brake Design of fence jaws: Aigner fence system Fence adjustment: manual Display of milling fence: none Feed mechanism: with 3 rollers Control panel position: bottom Weight approx.: 600 kg Motor power: 4 kW Dust extraction diameter: 120/120 mm Location: Rieth