Used Scm Multiflex for sale (650)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: Dsdpfx Akjizxf Ho Askw - working width: 240 [mm] - working height: 120 [mm] - number of spindles: 6 - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Planer in very good condtion. First owner!

Condition: excellent (used), Year of construction: 2019, Clean air filter (filter class M, filter bags, i.e. suitable for fine dust) Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 300 mm Max. volume flow: 5,750 m3/h Negative pressure at rated flow: 3,100 Pa Filter area: 30.0 m2 Number of filters: 60 pcs Compressed air cleaning Incl. integrated pre-separator Incl. integrated extinguishing system (connection to the water supply) Chip collection volume: 3 x 250 l Sound pressure level: 75 dB(A) Incl. dust baffle Incl. CE & all documents Dimensions L x W x H = 3435 x 1100 x 2440 mm Weight 850 kg Note regarding used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine on site. • Special agreements are only possible in written form. Dedpfx Ake Aazbwe Aekw (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), SCM Samco thickness planer, 40cm Max. planing width: 400 mm, Max. planing height: 240 mm, 3 classic knives (wedge-type), Manual lifting, 2 feed speeds, 1 roller in the table, 120mm dust extraction port, Dodpfx Ako Ah Th So Ajkw 4KW motor, Quiet operation, machine in very good condition.

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,259 kg, This SCM SI 5 panel saw was manufactured in 2019. It features a maximum cutting height of 200 mm at 90° and a sliding table version of 3800 mm, allowing for format cuts up to 3800 x 3200 mm. The machine is equipped with an "EASY TOUCH 7" electronic control unit, enabling up to 999 storable programs. If you are looking to get high-quality cutting capabilities, consider the SCM SI 5 panel saw we have for sale. Contact us for further details. - Controlled Axes: Up to 3 axes (Main Saw Height, Main Saw Tilt, Programmed Rip Fence / Scoring Unit positioning) - Voltage: 400 V - Phases: 3 ~ - Current: 22 A - Frequency: 50 Hz - Short-circuit current (Icc): 12 kA - Main Motor Power: 9 kW (12 HP) at 50Hz (with automatic star-delta starter) - Scoring Motor Power: 0.9 kW (S6-40%) - Main Saw Blade Diameter: Up to 550 mm (without scoring blade); up to 450 mm (with scoring blade) - Max. Cutting Height at 90°: 200 mm - Max. Cutting Height at 45°: 130 mm - Saw Blade Swivel: 46° - Saw Blade Speeds: 2500 / 3500 / 5000 RPM - Scoring Saw Speed: 8500 RPM - Cutting Width at Rip Fence: 1500 mm - Sliding Table Version: 3800 mm (Format cuts up to 3800 x 3200 mm) - Exhaust Socket Diameters: 120 mm (on frame), 100 mm (on saw blade guard) - Fence System: Programmed rip fence with THK guide and recirculating ball screw (25 m/min speed), fully swingable under the table - Blade Clamping: "Pro-Lock" system for quick clamping of main saw blade with keyless riving knife adjustment Dkodpfxj Adti Uj Ak Asw

Condition: used, Technical specifications: Max. saw blade diameter: 300 mm Min. saw blade diameter: 250 mm Saw blade arbor diameter: 30 mm Scoring saw diameter: 100 mm Manual height adjustment of the saw blade Tilting saw blade, adjustable from 0° to 45° Manual adjustment of the saw blade tilt angle Table length: 1600 mm Table locking mechanism Dust extraction port diameter: 120 mm Guide Safety guard Safety switch Power supply: 400 V Main motor power: 4 kW Dedpfxo Ahyxmj Ak Aokw Overall dimensions: Length: 1600 mm Width: 2900 mm Height: 1100 mm

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: KK00054470, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 612 kg, Equipment: CE marking, documentation/manual, SCM Minimax me 35 TR edge banding machine in CE version, manufactured in 2026. Equipped with a glue scraping unit with an automatic on/off system, a scraper with an automatic on/off system, a sawing unit with an automatic on/off system, internal machine lighting, an infrared lamp, and nesting copier kits for the routing unit and the band scraper. Dsdpfs Agniuox Ak Ajkw

Condition: like new (used), functionality: fully functional, spindle diameter 35mm 5 speeds from 3000 to 10,000 rpm motor power 5.5 kW Maggi feed system with 4 rollers and adjustable speed indexing carriage with a graduated scale for angle adjustment table 120x730 cm 760 kg year of manufacture: 2001 DTR manual – YES CE marking – YES guard for mortising AIGNER table tops 4 feed speeds turret for adjusting milling depth option to purchase without the feed system external dimensions: 2550x1700x1660 Dedpfszx U Nujx Ak Aekw

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Dsdpfxjzl Ap Ns Ak Ajkw

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planing width: 230 mm, overall weight: 3,000 kg, number of spindles: 5, Planing and Moulding Machine / Four-Sided Planer Manufacturer: SCM Model: Superset XL Year of manufacture: 2003 Planing machine with 5 spindles (bottom-right-left-top-universal), previously used in a parquet production facility. Djdpfxoz N Amzo Ak Aokw Working width: 230 mm Working height: 120 mm Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bottom Right Left Top Universal spindle Weight approx. 3000 kg

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles Dkedpfsyymz Usx Ak Aow - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Sanding width: 950 MM Dkedpfxo Afunhj Ak Asw 1 calibrating unit with a metal roller 2 combination unit with a rubber roller and sanding pad The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells 2 feed speeds Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: excellent (used), Year of construction: 2003, Edge banding machine SCM Type: Contour Dksdpfjzynngex Ak Aew

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Dkedpoz Ehvxsfx Ak Ajw

Condition: used, Tenoning spindle 1 Stk. Number of milling agregates 3 St. Spindle diameter 50 mm SCM Dogma Window Production Line For sale on behalf of a customer ----- Manufacturer’s Technical Description: Item 1 Tenoning Machine Worktable height = 990 mm Carriage for longitudinal machining: - Driven by a motor with numerical control - Stroke = 750 mm - Speed = 12 m/min - Max. acceleration = 2.5 m/s² Carriage for transverse machining: - Driven by a motor with numerical control - Stroke = 1600 mm - Max. speed = 12 m/min - Max. acceleration = 2.5 m/s² Left stop for aligning the workpiece during the loading phase: - Integrated into the auxiliary support bridge Crosscut unit (1TR): - Power = 4 kW (5.5 PS) - Rotational speed = 3,000 rpm - Outer diameter of the tool = 400 mm - Diameter of the tool bore = 80 mm - Fixed horizontal positioning - Vertical positioning with pneumatic on/off mechanism - In position 1 - Power = 15 kW - Rotational speed = 3,500 rpm - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 320 mm (optional: 370 mm) - Vertical stroke = -15 to +300 mm - Maximum reach of chip guard = 55 mm - Positioning: horizontal = fixed - Positioning: vertical = motor with numerical control - In position 2 Item 2: Profiling Machine: 1. Profile Milling Unit (1VD): - Power = 7.5 kW (10 HP) - Rotational speed = 6,000 rpm with bidirectional rotation - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 240 mm - Vertical stroke = -15 to +300 - Positioning: horizontal = pneumatic on/off with 5-position turret stop and time-controlled engagement - Positioning: vertical = motor with numerical control - in position 3 Work table height = 870 mm 2. Profile Milling Unit (2VD): - Power = 7.5 kW (10 HP) - Rotational speed = 6,000 rpm - Shaft diameter = 50 mm - Shaft length = 320 mm - Max. tool diameter = 240 mm - Vertical stroke = -15 to +300 - Positioning: horizontal = pneumatic on/off with 5-position turret stop - Positioning: vertical = motor with numerical control - in position 4 3. DUO Unit: Device for cutting out the glazing bead (in the horizontal position) and/or grooving unit (in the vertical position, RL/SF) (in position 5) It includes: > 1 glazing bead removal unit with: - Power = 3 kW - Rotational speed = 6,000 rpm - Shaft diameter = 30 mm - Shaft length = 25 mm - Tools mounted on a quill > 1 grooving unit: - Rotational speed = 9,000 rpm with belt drive Djdpfx Aks Ah T U Ej Askw - Shaft with centering diameter = 50 mm, L = 3 mm for securing the tool with 3 M8 screws spaced 120° apart - Tool diameter = 146 + 2 (max. diameter = 154) Tools: - Glass retainer strip cutting saws: inner diameter = 50 mm; outer diameter = 200 mm; for mounting on the quill with 6 M6 screws spaced at 60° - Gear-cutting cutters, inner diameter = 50 mm; outer diameter = 240 mm; for mounting on the quill with 6 M6 screws at 60° All tools for the dual function are mounted on the unit simultaneously, and the function is switched by rotating the unit 90° Positioning: - Rotational = pneumatic on/off - Axial = manual - Radial = pneumatic on/off with 5-position turret stop Feeding mechanism: - Wheel diameter = 110 mm - Wheelbase = 150 mm - Feed speed = 6 m/min (fixed) - Vertical positioning = manual with mechanical dimension indicator Positioning guides Right: - Ia = manual - IIa = pneumatic on/off via ...

Condition: used, Year of construction: 2015, Four-knife 120 mm cutterblock Four selectable feed speeds Heavy cast iron construction Precision thicknessing table with central column guidance Dsdez N Hfbjpfx Ak Aekw 520 mm working capacity 2015 CE

Condition: like new (used), Year of construction: 2022, machine/vehicle number: AA 10005475, functionality: fully functional, operating hours: 2,540 h, number of axes: 5, overall weight: 5,725 kg, Work table and workpiece clamping: 8 TV FLEX rails, length 1,600 mm 8 lifting devices for 1,600-mm rails 24 fixed vacuum supports, 145 × 145 mm, H = 75 mm 8 rotatable vacuum supports, 180 × 65 mm, H = 75 mm Front stops, H = 75 mm Additional front stops, H = 75 mm Double, removable central reference stop with 6 stops, H = 75 mm Working area X: 5510 mm Working area Y: 1620 mm Workpiece passage Z: 250 mm Vector speed X-Y axes: 78 m/min (ProSpeed) Machining units: 5-axis machining unit DIRECT 5 JQX: 13.5 kW with liquid cooling 3-way positionable extraction hood Drilling unit F23 L RO AX: 13 independent vertical spindles 10 horizontal spindles (6 in X and 4 in Y direction) Integrated slot cutter in X direction Drilling unit OF0480: With pneumatic vertical positioning (single Z-axis) Drilling unit with additional frequency inverter Device for increasing the drilling pressure in the Z direction Preparation for Hiteco units with 1 pneumatic interface Tool length measuring system Linear tool changer magazine TRB14: Arranged on the side with 14 tool positions Suitable for milling cutters and, depending on the configuration, larger tools or angular heads Moving linear quick-change magazine FAST 14: With 14 tool positions, designed for short tool change times and high machining efficiency Vacuum pump: 250/300 m³/h; 50/60 Hz Control and software: SCM Maestro Connect Maestro Active, Human Machine Interface (HMI) Maestro CNC Hardware key for Maestro CNC Basic Dodpfx Asz R Rgmok Aekw Additional key for Xilog Maestro (USB) Operating system: Windows 10 Embedded 64 Bit Control panel with integrated EYE-M PRO PC Chip disposal: Chip extraction mat 5510 mm; mobile chip container at the end of the machine bed Electrical connection: 400 V - 50 Hz

Condition: used, Year of construction: 2001, Number of belts: 2 pcs. Max. working width: 1100 mm Min. working height: 4 mm Max. working height: 170 mm 1st belt: Calibrating roller Abrasive belt length, 1st unit: 1900 mm Dodpfx Akez R Duvj Askw Abrasive belt width, 1st unit: 1115 mm 2nd belt: Combination unit Abrasive belt length, 2nd unit: 1900 mm Abrasive belt width, 2nd unit: 1115 mm Material thickness measuring device: Yes Fixed feed rate: 4.5/9 m/min Control: Hand-operated control panel Belt oscillation: Yes Infeed height: Variable (lower table moves) Table stroke: Electro-motorized Table display: Digital Operating pressure: 6 bar Approximate weight: 1207 kg Motor power: 15 kW Dust extraction diameter: 2x160 mm Location:

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Dodpfezxyfzjx Ak Aokw Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: excellent (used), SCM F520e Planer 4 cutting knives, Comb plates on the table, Electrically adjustable feed table, width 520mm, Dods Agf Eispfx Ak Aokw table length 3000mm, adjustable fence, brake, well-maintained machine, quiet operation.

Condition: ready for operation (used), Year of construction: 2023, overall weight: 623 kg, Panel saw manufactured in 2023. This SCM NOVA SI 30 features a maximum main blade diameter of 315 mm and a cutting height of 100 mm at 90°. It offers a rip capacity of 1000 mm to 1270 mm, depending on configuration. If you are looking to get high-quality cutting capabilities, consider the SCM NOVA SI 30 machine we have for sale. Contact us for further details. • Max. main blade diameter: 315 mm Dksdpsz Sqpvsfx Ak Aew • Max. cutting height at 90°: 100 mm • Max. cutting height at 45°: 70 mm • Blade tilting: 90°–45° • Rip capacity (parallel fence): 1000–1270 mm (depending on configuration) • Voltage: 400 V (three-phase) • Frequency: 50 Hz • Nominal current: 12 A

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Djdpszz Nmmefx Ak Aekw

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Dkedpfxozc Ilxs Ak Aew

Condition: ready for operation (used), functionality: fully functional, working width 950 mm Dksdpezz Nkrefx Ak Aew calibrating unit with metallic roller combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells two conveyor feed speeds motor power 11 kW year of manufacture 2000 power supply 400V weight 975 kg

Condition: used, Year of construction: 2003, Working width: 520 mm Planing height: 250 mm Planing cutterhead: Tersa Dkedpsz A D Ulofx Ak Aew Number of knives: 4 Height adjustment: electric Thickness display: Scale Feed rate: 2 speeds Infeed roller: Steel Outfeed roller: Steel Table rollers: no Motor power: 5.5 kW Dust extraction connection: 140 mm Machine length: 1200 mm Machine width: 1400 mm Weight: approx. 900 kg

Condition: excellent (used), SCM K360 HP Edge Banding Machine Liquids Pre-milling cutters, Plate heating Pre-heating unit Dksdpjzwd Ikefx Ak Aew Edge banding application with roller, Replaceable tank Features a glue drain Pneumatic pre-trimming cutter, Liquids Finished edge trimming cutters Top and bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edging (multi R1-R2), Flat edging, Liquids Polishing unit The machine features NC control Max. component height 60mm Max. edge banding thickness in roll 3mm, Feed rate 11m/min Original mileage less than 30,000 meters, in my opinion, the technical condition is very good Inspection and testing possible on site.