Used Screw Pump for sale (13,022)

Condition: used, Year of construction: 2015, Volume flow / delivery rate (depending on pressure variant): at 8 bar: approx. 0.34 1.24 m/min (or up to 1.01 1.2 m/min) at 10/11 bar: approx. 0.34 1.04 m/min at 13/15 bar: approx. 0.30 0.78 m/min Maximum overpressure: selectable, 8, 11, or 15 bar Equipment & dimensions: Compressed air tank: 270 liters (underslung) Refrigerant dryer: Integrated (environmentally friendly refrigerant) Sound pressure level: approx. 63-66 dB(A) (quiet operation) Bedpfezrtr Usx An Uswr Dimensions (W x D x H): approx. 630 x 762 x 1100 mm Weight: approx. 220-240 kg (varies slightly depending on the model) Electrical connection: 400 V / 3 phases / 50 Hz

Condition: good (used), Year of construction: 1995, Gebr. Kaeser screw compressor SK 19 Motor power: 11 kW Year of manufacture: 1995 Permissible operating overpressure: 10 bar Air delivery rate: 1900 liters/min with Kaeser control relay Dimensions approx. L 785 x W 820 x H 1017 mm (dimensions without connections). Weight: 270 kg Location: available from warehouse 54634 Bitburg Bodezrhrvepfx An Uswr - immediately available -

Condition: excellent (used), Year of construction: 2020, Kaeser screw compressor SK 22 - 11 bar - Top condition - Volume flow at 11.0 bar (gauge) 1.67 m³/min Electrical power consumption of the entire system at 11.0 bar (gauge) 13.7 kW Max. overpressure 11.00 bar Efficiency of drive motor at full load 91.2 % Efficiency class of drive motor IE3 Rated power of drive motor 11.0 kW Speed of drive motor 2960 1/min Type of protection of drive motor IP 55 Electrical supply 400V / 3 / 50Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 6 K Sound pressure level 66 dB(A) Bwodpfxszrhh Ds An Uer Max. usable volume of warm air 2500 m³/h Compressed air connection G 1 Coolant volume 7.0 l Coolant type Compressor SIGMA FLUID MOL Dimensions (W x D x H) 750 mm x 895 mm x 1260 mm Weight 312 kg Location: available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm Bedpsl I Dx Njfx An Ujwr opening: approx. 1.100 x 1.700 mm new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: new, STAR ball screw Type: 1510-3-1607 Pitch: 5 mm Thread length: 2008 mm Bwodezcwkwepfx An Usr Overall spindle length: 2100 mm Thread diameter: 31 mm 4 pieces in stock.

Condition: good (used), Year of construction: 2017, FOR SALE: Complete Industrial Compressed Air System / Unit – KAESER For sale, a complete, high-performance compressed air system from the KAESER brand, ideal for workshops, factories, or demanding industrial applications. High-quality German equipment, reliable, and well-maintained. DETAILS OF THE EQUIPMENT (3 MAIN UNITS): 1. Screw compressor with variable speed drive – KAESER CSDX 165 SFC Brand / Model: Kaeser CSDX 165 SFC (Sigma Profile) Year of manufacture: 2017 Rated power: 90.0 kW Maximum operating pressure: 8.5 bar Motor speed: 2980 rpm Series / Article number: 3111 / CSDX.4 Specific feature: Equipped with a variable speed drive (SFC) for optimized energy consumption management based on air demand. 2. Refrigerant air dryer – KAESER TF 280 Brand / Model: Kaeser TF 280 Year of manufacture: 06 / 2017 Maximum operating pressure: 16.0 bar Bwsdpfx Ajzqtdzen Uor Electrical supply: 400V / 3 Ph / 50Hz (Rated current: 9.6 A) Refrigerant: R-134a (2.60 kg) Serial number: 1631 / Material: 1.2482.0 3. Fixed-speed screw compressor – KAESER CSD 102 T Brand / Model: Kaeser CSD 102 T Integrated equipment: Integrated air dryer module (T version) and SIGMA CONTROL electronic control. Usage: Ideal as a main compressor or as a backup to ensure a secure air supply. ADDITIONAL INFORMATION Overall condition: Good visual and functional condition, always maintained in a production setting. Availability: Immediate. Terms: Collection on-site, the responsibility of the buyer (suitable handling equipment should be provided).

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: Flange/shaft: see photo, square 8 x 17 mm -Number: 4 pumps available -Price: per piece Bjdpfx Anjvwi Nqo Uewr -Dimensions: 87/84/H100 mm -Weight: 1.9 kg

Condition: like new (used), Year of construction: 2021, operating hours: 841 h, functionality: fully functional, Screw compressor, Kaeser Aircenter SK22 Bwsdpszrtlbjfx An Usr 11 kW 8 bar 2 m3/min Year of manufacture: 2021 Operating hours: 841

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: AII362754, power: 37 kW (50.31 HP), operating pressure: 7 bar, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA37 oil-lubricated compressor is a powerful and reliable machine designed to deliver optimal performance in various industrial environments. This used model, with a power rating of 37 kW, can operate at a pressure of 7.5 bar, making it ideal for applications requiring constant pressure and energy efficiency. Manufactured by Atlas Copco, a leader in the compressed air solutions industry, the GA37 is known for its durability and robust design. Thanks to its advanced technology, it ensures quiet operation while guaranteeing the production of high-quality compressed air. Perfect for companies looking to improve their productivity while minimizing operating costs, this compressor is a wise choice for various industrial sectors. Overall, the Atlas Copco GA37 compressor combines performance and reliability, while also offering excellent value for money for a used unit. It is a smart choice for those seeking a proven and efficient solution in the field of oil-lubricated compressors. Bjdpfxezpxnvs An Uewr

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Bsdpfjzqgllox An Ujwr Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: excellent (used), functionality: fully functional, MAAG EXTREX 56 melt pump station with Kreyenborg K-SWE 101 screen changer Complete melt pump station consisting of a MAAG EXTREX 56 melt pump and a Kreyenborg K-SWE 101 twin-piston screen changer. The system has already been mechanically adapted, mounted on a common base frame, and is ready for immediate use. Scope of delivery: * MAAG EXTREX 56 melt pump * Drive unit including gearbox, cardan shaft, and motor * Complete heating system for the melt pump * Kreyenborg K-SWE 101 twin-piston screen changer * Hydraulic unit * Manual switching via hand valve * Heating system for the screen changer * Completely mounted on a base frame * Connection box The system can be inspected and tested at our facility in Wuppertal at any time. On request, demonstrations or video calls are also possible. In addition, we have other melt pumps, screen changers, and various peripheral devices for extrusion systems in stock. We will gladly put together a suitable solution for you, tailored to your application. Bwsdpfx Aezpw Sajn Usr

Condition: used, HERION hydraulic power unit with hydraulic pump Hydraulic power unit Unit No.: 6352160 Year of manufacture: 1976 Operating pressure: 115 bar Flow rate: 4.5 litres/min. Hydraulic pressure (pump): max. 160 bar Motor power: 1.5 kW Tank capacity: 40 litres - 1 return filter - 1 pressure gauge 250 bar - 1 4/3-way valve HERION, type S10 B51 G013611 (24 Volt DC, 35 Watt) Space requirement (L x W x H): 600 x 400 x 600 mm Weight: 70 kg Very good condition Sold without oil Bedpfx Aoxf Uzqon Ujwr

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Bsdpfxovvi Nnj An Uewr

Condition: used, Year of construction: 1995, Storage location: Supplier Bsdpfx Asvvi Sion Uowr

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, Bedpfxjxx Avpj An Uowr vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: excellent (used), Year of construction: 2012, operating hours: 5,735 h, functionality: fully functional, Oil-free screw compressor, Atlas Copco ZR90 Bjdpfjzqvvasx An Uowr 90 kW 7.50 bar 14 m3/min Year of manufacture: 2012 Operating hours: 5735

Condition: used, Year of construction: 2016, total length: 1,200 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 150 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: C34567 - Transport dimensions: 1200mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bwjdpfx Anowgxh Ho Uor Peter Stroomberg

Condition: used, total length: 1,040 mm, total width: 550 mm, total height: 450 mm, - Documentation available: No - CE certificate present: No - Transport dimensions: 1040mm x 550mm x 450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Bsdpfxoxm Rgxj An Uswr

Condition: as good as new (ex-display), Diaphragm pump, FLUX air-operated diaphragm pump – 8 bar,Membrane pump, New condition (without warranty) Manufacturer: FLUX - GERÄTE GMBH (Made in Germany) Bedpfx Aezrm Aajn Ujwr Type: FDM 25 S/TT Serial number / Part number: 15663 Max. flow rate: 150 – 175 l/min Max. operating pressure (PN max): 8 bar Housing material: Stainless steel (S) Diaphragm / Seal material: PTFE / Teflon (TT) Connection size: 1" (DN 25)

Condition: excellent (used), Year of construction: 2018, operating hours: 43,309 h, functionality: fully functional, Screw compressor Atlas Copco GA75VSD+FF Inverter and dryer integrated 75 kW 12.75 bar 15.50 m3/min Bedpezp Urwefx An Uswr Year of manufacture: 2018 Operating hours: 43,309

Condition: used, Year of construction: 2015, operating hours: 6,123 h, total width: 1,500 mm, total height: 1,700 mm, total length: 2,000 mm, briquette diameter: 50 mm, space requirement width: 1,500 mm, space requirement length: 2,000 mm, space requirement height: 1,700 mm, power: 5.5 kW (7.48 HP), filling opening length: 1,040 mm, filling opening width: 1,040 mm, No. 04545 Briquetting press with screw conveyor WEIMA C 150 Bsdezpxhijpfx An Ujwr Used, year of construction 12/2015, 6123 operating hours, very good condition Hydraulic briquetting press for compacting dry wood shavings, sawdust, paper, cardboard and comparable materials Throughput capacity (depending on material) approx. 30 - 50 kg/h Briquette diameter 50 mm Motor power 5.5 kW Hydraulic pressing mechanism Max. clamping jaw stroke 10 mm Storage hopper with discharge arm / agitator Level sensor for automatic operation Manual and automatic operation Siemens SIMATIC PLC control Briquette length monitoring for the production of uniform briquettes Storage hopper approx. 1040 x 1040 mm LW Separate hydraulic unit with oil tank CE-compliant Incl. screw conveyor type RFS. NW 250 x 5200 Motor power 1.5 kW Conveying capacity approx. 4.0 m3/h Filling opening approx. 900 x 300 mm LW Incl. geared motor, feeding section and protective covers Incl. complete technical documentation Transport dimensions briquetting press approx. 2000 x 1500 x 1700 mm LWH, weight approx. 1000 kg Transport dimensions screw conveyor approx. 6500 x 500 x 500 mm LWH, weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Lubrication pump, oil pump for central lubrication, lubrication unit Central lubrication pump, oil pump for central lubrication, hydraulic pump, oil central lubrication pump Manufacturer: BEKA Schmiertechnik / Baier & Köppel, Pegnitz Type E-812 / ES0.5 Year of manufacture: approx. 1990 Bwedezpbq Hspfx An Uer Flow rate: 0.4 l/min Operating pressure: 15 bar Tank capacity: approx. 3 liters Motor power: 0.09 kW Motor speed: 2730 rpm Current consumption: 0.4 A Power supply: 400 Volt, 50 Hz Dimensions L x W x H: 280 x 150 x 380 mm Weight: 8.5 kg Good condition 2 units available Price stated per unit

Condition: good (used), Year of construction: 2018, 2 spiral conveyors, ambaflex, – used – Price per unit ex works (net): only €8,500 for self-disassembly! Manufacturer: ambaflex Year of manufacture: 2018 Type: SPIRALVEYOR SV Serial number: e.g.: 26811-01 The respective conveying height will be provided later. Diameter and width of the link chains will be provided later! Condition: good Available: from approximately August 2026, or by agreement Bedpfezpf Ntex An Ujwr Location: Erfurt area Two spiral conveyors were installed for the conveying system to transport the cartons from the goods receiving area to the 1st floor and to return them to the ground floor after the packing process. One spiral conveyor is used for the vertical transport of cartons and containers. The spiral conveyor can be used both for the vertical transport of the conveyed goods to another level and as a buffer within the system.

Condition: used, Year of construction: 2023, functionality: unexamined, GEA Hilge MAXA stainless steel centrifugal process pump in excellent condition. Specifications: Manufacturer: GEA Hilge Bodpjzrm I Njfx An Uewr Type: MAXA 200-400 CNY 200/200/55/4 Year of manufacture: 05/2023 Capacity: 280 m³/h Head: 20 m Motor power: 55 kW Siemens IE3 electric motor Speed: 1,450 rpm Stainless steel pump housing Complete plug-in unit with motor, coupling, and base frame Suitable for the food, beverage, dairy, pharmaceutical, and chemical industries The pump is sold as is, where is, without any warranty. Delivery: EXW Rotterdam, The Netherlands, loaded onto your truck. Inspection is possible by appointment.

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Bwodpfxjzphf Ds An Uor Price on request. We will be happy to advise you – competent advice and nationwide service.