Used Sd 300 Lathe for sale (31,678)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No minimum price – guaranteed sale to the highest bidder! Only 113 operating hours! The payment deadline for the machine is 04/12/2025! Placing a bid obligates you to collect the machine on time, between 12/10/2025 and 12/12/2025! The machine can be inspected on 11/25/2025! TECHNICAL DETAILS Turning length: 336 mm Turning diameter: 440 mm Bar capacity (max.): 52 mm Swing over bed: 620 mm Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Shank diameter for square tools: 20 mm Shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm Rapid traverse in X-axis: 30,000 mm/min Rapid traverse in Z-axis: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT • Coolant system Kfjdpfxjx Itdxe Agzsa • Chip conveyor

Condition: used, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 06/2024, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: white, Year of construction: 2024, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, cooling unit, tail-lift, truck registration, Reference number for inquiries: 405101 Krone, SDR 27 * Year of manufacture: 2024 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Air suspension * Lift axle * Load securing certificate DIN EN 12642 Code XL * Refrigerated box body Kfedpfx Agexxpmhszsa * Complete double-deck, including cross beams * Pallet box * Spare wheel holder * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering device * Document box * Deep-freeze compartment * Aluminum floor * Thermo King refrigeration unit * Suspension: Air * Gross vehicle weight: 36,000 kg * Axle manufacturer: Krone * Tire condition, 1st axle: 60% / 60% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 70% / 70% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 60% / 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Krone Duoplex Thermo King SLX 300 * 121 diesel operating hours * FRC valid until 11-2029 * Swing doors * Dhollandia tail lift, 2500 kg lifting capacity Disclaimer: Specifications subject to change, prior sale and errors excepted. More images and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Handling of all (export) documentation * Ordering export or customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV certification, registration service * Transport of commercial vehicles Ask our trained staff—we will be glad to assist you.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, turning diameter over cross slide: 600 mm, spindle bore: 90 mm, turning diameter: 570 mm, turning length: 3,000 mm, quill stroke: 220 mm, quill diameter: 80 mm, total length: 4,900 mm, total width: 1,300 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 28 rpm, bed width: 380 mm, Turning diameter in gap: 720 mm, overall weight: 4,500 kg, . Height of centers mm 300 . Distance between centers mm 3000 . Width of the bench mm 380 . Rotating diameter on the bench mm 600 . Rotating diameter on the natural recess mm 720 . Turning diameter on the transverse carriage mm 570 . Length of the natural recess mm 360 . Maximum spindle speed G/1’ 28/1600 . Spindle nose type D1 8” . Spindle hole diameter mm 90 . Tailstock quill stroke mm 220 Ksdpovi Ez Tjfx Agzofa . Tailstock quill diameter mm 80 . Tailstock quill length mm 370 . Tailstock morse taper N 6 . Transverse carriage stroke mm 360 . Tool carriage stroke mm 180 . Mobile steady rest (Max. turning diam.) mm 220 . Fixed steady rest (Max. turning diam.) mm 270 . Main motor power Kw 11 . N. standard threads N 254 . Standard threads min/max (metric) fil x 1” 1/56 . Standard threads min/max (witworth) mm 0.5/28 . Standard threads min/max (module) Mod. 0.5/28 . Threads min/max (diametric pitch) d.p 1/56 . Longitudinal feeds min/max mm 0.08/3 . Transversal feeds min/max mm 0.04/1.5 . Length of carriage support on the bench mm 600 . Length of transversal carriage mm 600 . Net weight kg 4500 . Dimensions mm 4900 x 1300

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 8000 [rpm] - Max. turning diameter : 60 x 60 [mm] UPPER RIGHT TURRET - X/Z stroke : 300 x 285 [mm] POWER SUPPLY Kfjdpjwdad Defx Agzoa - Supply voltage : 200 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2422 x 1957 [mm] - Machine height : 2430 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : DMG MORI COMPACT LINE (Fanuc 0i-TF) - Electronic handwheel - Coolant tank - Parts catcher - Workpiece loading robot - Electric transformer

Condition: used, overall weight: 36,000 kg, axle configuration: > 3 axles, first registration: 06/2024, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: white, Year of construction: 2024, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, cooling unit, tail-lift, truck registration, Reference number for inquiries: 40510 Kodpfxexxpkye Agzofa Krone, SDR 27 • Year of manufacture: 2024 • ABS (Anti-lock Braking System) • EBS (Electronic Braking System) • Tail lift • Air suspension • Lift axle • Load securing certificate DIN EN 12642 Code XL • Refrigerated box body • Full double-deck incl. load beams • Pallet box • Spare wheel holder • Connector: 2 x 7-pin • Connector: 15-pin • Raising and lowering device • Document box • Deep-freeze compartment • Aluminium flooring • Thermoking refrigeration unit • Suspension: Air • Gross vehicle weight: 36,000 kg • Axle manufacturer: Krone • Tire condition 1st axle: 60% -- 60% - Tire size: 385/65 R22.5 • Tire condition 2nd axle: 70% -- 70% - Tire size: 385/65 R22.5 • Tire condition 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 • Tire sizes: 385/65 R22.5 • Krone Duoplex Thermo King SLX 300 • 121 diesel operating hours • FRC valid until 11/2029 • Swing doors • Dhollandia tail lift, 2,500 kg lifting capacity Liability disclaimer: Subject to prior sale, changes and errors excepted. You can find more photos and videos on our website. Our extensive services include, for example: • Purchase / sale / rental of commercial vehicles • Fast, straightforward financing solutions • Handling of all (export) documentation • Order export or customs license plates • Vehicle preparation: new tarpaulins, livery, painting, etc. • Professional loading and load securing • TÜV inspections, registration service • Transport/transfer of commercial vehicles Ask our trained specialist staff – we will be happy to advise you.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Kfjdpfxjx I Axrs Agzea Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: used, Year of construction: 2019, control Fanuc i-Serie turning diameter 370 mm turning length 712 mm greates pass round over bed 651 mm swing diameter over slide rest 461 mm x-axis 255 mm Kjdpsx Ik Ubjfx Agzjfa z-axis 790 mm turning speeds 5.000 U/min Number of tools 12 St. spindle hours ca. 8.953 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 780 mm, turning diameter: 215 mm, spindle bore: 71 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 780 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 27 m/min, Equipment: documentation/manual, CNC lathe Nakamura Tome WT 300 with: - maximum turning diameter 270 mm - maximum turning length 780 mm - Fanuc 18i-TB control unit - main spindle and sub-spindle - spindle nose ASA 8 - C axis - Y axis - 2 turrets with driven tools - automatic door - LNS bar feeder - chip conveyor - various included tapers - various included bars Free 12/24 month payment deferral available Kfedex H Nmmjpfx Agzea

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T 2 toll turrets 2 x 12 tool taper HSK 63 Kedpsqn A Rgsfx Agzsfa frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade

Condition: used, maximum load weight: 29,060 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, Year of construction: 2015, Equipment: ABS, 3-Axle Krone SD Refrigerated Box Trailer TYPE: SD VIN: 641120 Chassis / Attachments: * Lift axle * 3 x BPW Eco Plus with disc brakes * Tyres: 385/65 R22.5 * Remaining tread: front approx. 70/50%, middle approx. 50/60%, rear approx. 80% * Jost landing legs * Pallet box * 2x spare wheel holders * 1x fire extinguisher holder Body: * Refrigerated box body * L x W x H: 13.40m x 2.46m x 2.65m * Approx. 87 m³ * 2 x load securing rails per side * Thermo King SLXe 300 refrigeration unit * Operating hours: engine 5,749 hrs, shore power: 0 hrs * 3 x load securing rails on top Weights: * Gross weight: 38,000 kg * Unladen weight: 8,940 kg * Payload: 29,060 kg Other: * French registration ---- New main inspections / safety inspections or axial de-/re-rating available upon request. We are happy to assist you with export/transit license plates; vehicle transfers within Germany are also possible. Contact us! ---- We speak German, English and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! Ksdpfjx Inicjx Agzefa ---- Who are we? Leible Nutzfahrzeuge is a family business located in Kehl am Rhein. With our many years of experience in the refurbishment and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength is in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our company philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our clients an excellent all-round service package and provide them with a competent contact partner who supports them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to assist you in arranging special transports. Temporary / export license plates We are happy to assist you in obtaining export/short-term license plates. Handling customs formalities We are happy to assist you with customs clearance.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance X-axis: 214 mm, travel distance Z-axis: 508 mm, spindle motor power: 20 W, HAAS Servo Bar 300 bar feeder, controlled by a HAAS CNC with color LCD screen, September 2005, fully programmable hydraulic tailstock, tool presetting, collet chuck, automotive parts catcher, bolt-on turret, chip auger, spindle orientation. Kedpfx Agsx D Tmvjzjfa Tools: boring bar holder, external clamping jaws, three-jaw chuck.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 1,144 mm, rotational speed (max.): 4,500 rpm, TECHNICAL DETAILS Kfedex Exqfspfx Agzoa Turning length: 1,000 mm Turning diameter: 300 mm Spindle bore: 68 mm X-axis travel: 235 mm Z-axis travel: 1,144 mm Turret: 12 stations – all driven Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 MACHINE DETAILS Control: OSP P300L-R Weight: 6,300 kg Required installation space: 3.55 m x 2.35 m x 1.93 m EQUIPMENT Chip conveyor Chuck (diameter: 250 mm) Touch setter Tailstock

Condition: used, Year of construction: 2016, control Fanuc i-Serie turning diameter 370 mm turning length 712 mm greates pass round over bed 651 mm Kodpfx Agex Ik T Rszofa swing diameter over slide rest 461 mm x-axis 255 mm z-axis 790 mm turning speeds 5.000 U/min Number of tools 12 St. auto power on hours ca. 13.086 spindle hours ca. 4.221 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1968, Technical details: bore capacity in St 60 - full boring: 40 mm drill capacity in cast iron: 55 mm turning diameter over bed: Ø 22 - 2200 mm clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm Total power requirement: 5,0 kW machine weight approx.: 1,2 t dimension machine xH: 1,70 x 0,80 x 1,40 m Relieving lathe Kodpfxsu Iwwzs Agzefa This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: - Speed 22 - 2000 rpm - feed rate range 0,025 - 0,5 U/mm - three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws - headstock bore 45mm - drilling spindle taper MK 5 Operation via control panel on the side of the machine. By removing the lathe chuck, the spindle can be used as a drilling unit. max. slide adjustment 300 mm accessories: -div. outer jaws for lathe chuck i.D. *

Condition: like new (used), – Distance between centres 910 mm – Swing over bed 300 mm – Swing over gap 430 mm – Swing over cross slide 180 mm – Spindle bore 40 mm – 75/1400 rpm – Digital speed display – Longitudinal and cross feed – Digital readout on two axes – Brake – Coolant system Kfjdpfx Agjxz S Umozea – Multifix quick-change toolpost with 4 tool holders – Lighting – Safety cover – Fixed steady rest – Travelling steady rest – 3-jaw chuck – 4-jaw chuck – Emergency stop – Documentation – 400V

Condition: used, maximum load weight: 29,060 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, Year of construction: 2015, Equipment: ABS, 3-Axle Krone SD Refrigerated Box Trailer Model: SD VIN: 641120 Chassis / Attachments: * Lifting axle * 3 x BPW Eco Plus with disc brakes * Tyres: 385/65 R22.5 * Remaining tread depth: front approx. 70/50%, middle approx. 50/60%, rear approx. 80% * Jost landing legs * Pallet box * 2x spare wheel holders * 1x fire extinguisher holder Body: * Refrigerated box body Kfedpfx Agex Inh Sozoa * Dimensions (L x W x H): 13.40m x 2.46m x 2.65m * Approx. 87 m³ * 2x load securing rails per side * Thermo King SLXe 300 refrigeration unit * Oper. hours: Engine - 5,749 hrs, Mains operation: 0 hrs * 3x additional load securing rails at the top Weights: * Gross weight: 38,000 kg * Unladen weight: 8,940 kg * Payload: 29,060 kg Other: * French registration ---- New general inspections / safety checks or weight downgrades/upgrades available upon request. We are happy to assist you with obtaining export/transfer license plates. We can also arrange transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale and errors excepted. ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sales of new and used commercial vehicles. On 11,000 m², we offer a wide variety of vehicles. Our company philosophy is characterized by fairness and reliability. Customer satisfaction is our top priority, which is why we offer a comprehensive all-round service package and provide a dedicated contact person to assist you with the purchase or sale of vehicles. See for yourself! Our Services for You: Vehicle Loading We are happy to assist you with loading your purchased vehicles. Arrangement of Special Transports We gladly support you in organizing special transports. Short-term / Export License Plates We can assist you in obtaining export or temporary license plates. Customs Procedures We are happy to assist you in handling customs formalities.

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm turning height: 2400 mm ram stroke each side: 1490 mm Kodpfsw Rz U Ajx Agzefa ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D *

Condition: good (used), Year of construction: 2004, control TRAUB SYSTEM TX8H weight 3500 kg range L-W-H 3960 x 1640 x 1800 mm output 11 kW number of spindle speeds 5600 / 4000 min-1 Torque 200 / 280 Nm The TRAUB turning machine TNA 300 was designed for the following machining of workpieces with a turning length of 450 mm. --> for machining metal and plastics with a defined cutting edge using suitable Kjdpfx Aewwl Iusgzefa tools. --> for mounting in jaw chucks of sizes 160 to approx. 250 --> for machining material bars up to a Ø of 42 or 65 mm --> with EHS special version Workpiece removal device --> chip conveyor 800 mm long -> Technical data Working range Spindle diameter: 42 mm --> Spindle head DIN 55026, size: A5 --> Clamping fixture diameter: 160-175 mm / 200-250 mm --> turning diameter max: 275 mm --> Distance over turning centre: 35 mm --> max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool carrier Tool holders for cylindrical shank DIN 60880: 12 pcs. --> Shank diameter: 30 mm --> Chisel cross-section: 20x20 mm --> Switching time 1 station: 0.5 sec. --> Switching time each additional station: 0.15 sec. --> Feed drives X-axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> rapid traverse/path speed: 15 m/min --> Z-axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> rapid traverse/path speed: 18 m/min --> Y-axis: --> slide path: +- 35 mm --> Feed force: 6000 N --> rapid traverse/path speed: 10 m/min --> C-axis: --> Speed: 100 min-1 --> Torque: 140 / 196 Nm --> electrical resolution: 0.001 degree --> tailstock quill diameter: 70 mm --> quill stroke: 60 mm --> Stroke of the quick retraction: 280 mm --> quill setting force at 55 bar: 8600 N --> Mounting according to DIN 228: Mk 4 --> Steady rest Clamping range: 8 - 95 mm --> Workpiece removal device Max. part length: 250 mm --> Max. part weight: 3 kg

Condition: good (used), Year of construction: 2018, Max. machining diameter: 20 mm Max. turning length per chuck: 175 mm Outside diameter tools (number of tools): 6 Outside diameter tools size: 12 mm Inside diameter tools (number of tools): 4 Inside diameter tools sleeve size: ER 16 Inside diameter tools max drilling capacity: 10 mm Side live tools (number of tools): 4 Side live tools max speed: 6000 rpm Side live tools servo motor power: 1.4 kW Side live tools max drilling capacity: 8 mm Main spindle speed: 10000 rpm Kfsdewxb Hiepfx Agzja Main spindle motor power: 2.2 / 3.7 kW Controller: FANUC Oi - TF Tank volume: 140 L Machine dimensions (L x W x H): 2 x 1.3 x 1.8 m Machine weight: 2100 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 2,900 h, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Perfectly functioning machine with sub-spindle, chip conveyor, tool presetting, and set of tool holders and manuals Kfodjxrgglepfx Agzja

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm Kfjdpfx Asw S Efzsgzea centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Kedornkhyopfx Agzjfa Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135667, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-T200L, workpiece length (max.): 200 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm X-axis travel: 210 mm Y-axis travel: 330 mm C-axis travel (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool stations in turret: 12 MACHINE DETAILS Control: OKUMA OSP-T200L Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Feeder belt Kedsxnlh Tspfx Agzofa Three pallets Note: The tool holders and tools visible in the working area are not included in the scope of delivery or sale. Any oil mist extraction unit or pallets shown on the feeder belt in the photos are also not included in the sale or delivery.

Condition: used, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 72 mm, turning diameter: 600 mm, Manufacturer: Gurutzpe Model: Super M 300 Admissible dimensions: Distance between centers: 3,000 mm Diameter over bed: 600 mm Diameter over carriage: 360 mm Diameter over gap: 780 mm Bed width: 415 mm Spindle bore: 72 mm Speeds: 18 speeds available: from 16 to 1,000 rpm Motor: Power: 10 HP Equipment: Ksdpfx Aswtwqajgzsfa Fagor digital readout Quick-change toolpost 4-jaw self-centering and adjustable chuck Steady rest General condition: Lathe in good condition

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 5746-01-358509.3, turning diameter: 280 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-U100L, workpiece length (max.): 200 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Submitting a bid obligates you to collect the machine on time between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm Ksdpoxnlfrsfx Agzsfa C axis (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool positions in turret: 12 MACHINE DETAILS Control: OKUMA OSP-U100L Length of feeder conveyor: approx. 3,500 mm Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Turret can accommodate driven tools Feeder conveyor Three pallets Note: The toolholders and tools visible in the working area, as well as the chuck, are not included in the scope of sale and delivery. Any oil mist extractor and pallets on the feeder conveyor visible in the photos are also not included in the scope of sale and delivery.