Used Segmental Saw Blades for sale (8,152)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Weight 0 kg Hfjdpfx Adev A Hgko Rog Total power requirement 2,2 kw

Condition: ready for operation (used), Bratstvo Lignum sharpening and grinding machine for sawmill blades. The machine is complete and in working technical condition. It can be additionally equipped with rollers for holding band saw blades. Hsdpfoxx Uxiex Ad Rofg

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw with large cutting width. Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Cutting height 120 mm. Powered top rollers. Electric pressure beam adjustment. Spiked chain. Counter bearing. Hfjdpfx Aoxtwvtod Reg Stepless hydraulic feed from 0 to 50 m/min, new. Drive motor 75 kW with pneumatic tensioning station. 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed.

Condition: new, Band saw blade Make Röntgen Type bi-alfa cobalt Dimensions :4860 x 34 x 1.1 mm 3/4 Combi 10 Hfodpfx Aderwl R Ne Rog unused, out of magazine

Condition: used, functionality: fully functional, saw blade diameter: 400 mm, SCHMIDT sharpening machine for HSS saw blades Hfodjyxhmcopfx Ad Rog

Condition: ready for operation (used), Sanding width: 70 cm Hfjdpfewcc Icex Ad Reg Sanding height: 12 cm Motor: 14.7 kW Smooth feed adjustment Weight: 2000 kg

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V Hsdpfx Ajh Anyfed Rjfg

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Hfodpfx Adequzd Ro Rsg Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 120 mm, cutting width (max.): 300 mm, saw blade diameter: 350 mm, height adjustment type: mechanical, saw blade bore: 70 mm, actuation type: electric, - Operating manual, DTR - Italian production Hodpfx Adeym Ag Se Rjfg TECHNICAL SPECIFICATIONS: - Track width: 300 mm - Cutting height: 120 mm - Max. blade diameter: 350 mm - Motor power: 30 kW - Table width: 750 mm - Min. workpiece length: 600 mm - Feed speed adjustable via gearmotor - Three rows of anti-kickback pawls - Possibility to mount a board – shoe - Spindle diameter: 50 mm - Sleeve diameter: 70 mm - Sleeve equipped with spacers - Automatic central lubrication - Four upper feed rollers - Extraction port diameter: 200 mm - Machine dimensions (L/W/H): 155 / 165 / 160 cm - Weight: 1800 kg

Condition: new, Circular saw blade Hfjdpfx Aomxi T Aed Rjg diameter 300 mm Bore 40 mm thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm HSS unused ,from magazine liquidation bearing number 28418

Condition: new, Circular saw blade HSS diameter 225 mm Number of teeth 180 pitch 4 mm width 2 mm Bore 32 mm (28419) unused, from magazine liquidation Hjdpfxjmxi T Uo Ad Rjfg

Condition: excellent (used), Year of construction: 2004, Multi-blade saw Raimann ProfiRip KR 310 M (2 movable flanges) with package crosscut saw HOLTEC ES 121SHKA and Hurrican extraction system Model: Raimann ProfiRip KR 310 M Year of manufacture: 2004 (refurbished 2022) Multi-rip saw with 2 adjustable saw blades Technical details: Track gauge: 340 mm Total passage width: Maximum 950 mm (instead of 800 mm) Cutting height with/without pressure plate: 115 mm / 130 mm Workpiece length: Minimum 450 mm Maximum saw blade diameter: 380 mm Minimum saw blade diameter: 250 mm Hfjdpfx Aeymgypsd Reg Saw blade bore: 80 mm Saw shaft diameter: 65 mm Saw shaft speed: 3,900 rpm Motor: 30 kW Laser guides: 3 units Operating pressure: 6 bar Infinitely variable feed speed: 8–48 m/min Feed motor: 1.5 kW Voltage: 400V / 50Hz

Condition: used, Costa Leone 2-160 multi-blade saw. In perfect working condition. Hfedpfehpbqmsx Ad Rjg

Condition: excellent (used), Paul KME 2/1000R Passage/working width: 1000 mm Hsdjyxmlkopfx Ad Rofg Cutting height: Up to approx. 120–125 mm. Motor power: 18.5 kW Cutting system: movable saw (saw sleeves), computer controlled Feed: Infinitely variable feed adjustment Hydraulic adjustment of the upper roller height.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Hfsdpfxsypbx Es Ad Rjg Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: excellent (used), functionality: fully functional, Cosmec SM100 Multi-Blade Saw Track width: 240 mm Cutting height: 100 mm Maximum saw blade diameter: 300 mm Blade bore: 60 mm Hjdpfsyngw Rox Ad Refg Anti-kickback pawls Feed speed adjustable via variator Main motor power: 11 kW

Condition: ready for operation (used), Year of construction: 1981, power: 45 kW (61.18 HP), cutting height (max.): 200 mm, shaft diameter: 65 mm, chain width: 340 mm, Double-shaft multiblade saw Manufacturer: Raimann Model: KD Chain width: 340 mm Cutting height: 200 mm Saw motors: 2 x 45 kW Shaft diameter: 65 mm Hfodpfxjyhlube Ad Rog Electric height adjustment Transport chain with spikes Feed system modernised to stepless speed adjustment via potentiometer, approx. 0 to 40 m/min. Includes 3 saw sleeves with saw blades, some fitted with new saw blades.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Operating instructions included Hsdpfxewd N Daj Ad Rsfg Feed rate 30 or 60 teeth per minute

Condition: used, Year of construction: 2007, cutting height (max.): 1,060 mm, cutting width (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Hodpfowk D Efox Ad Rsfg Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, cutting height (max.): 160 mm, Multi-blade saw COSTA model PUMA 2/50, height 160 mm, width 350 mm, 2 motors of 37 kW each. Hfjdpfx Asywcrdsd Rog

Condition: new, Year of construction: 2026, - 200mm cutting height - 750mm cutting width - 5-30m/min steppless feed Hfsdeca Hawjpfx Ad Rsg - 90 KW Sawing Motor - 3KW Feed gearbox - 75mm Sawarbor

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), • 160 mm cutting height • 600 mm cutting width • 70 mm saw shaft • 1 set of spacer rings according to customer requirements • 5–30 m/min infinitely variable feed Hfedpfxsxqd Nno Ad Rjg • 2.2 kW feed motor • 4 driven lower rollers • 2 upper driven rollers • 3200 kg weight • 55 kW saw motor • Complete electrical system, with control cabinet and control panel • CE-compliant design • Machine painted in RAL 6011 • Protective devices painted in RAL 7032

Condition: used, mainly discs for PMC 12 with a diameter of just under 1000 mm Hfsdpsyuppijfx Ad Rjg

Condition: used, Year of construction: 1974, Technical details: Hedpfx Adewqplke Rsfg total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: used, Costa multi-blade saw -Type Lince Hfedpfx Adjvw Rplo Rog -max. cutting height 140mm -motor 30kW