Used Semi Trailer for sale (17,424)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. Dsdey Tvphjpfx Ai Eowd ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) # Approval & ADR Equipment * ECE R70 rear warning plate * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear

Condition: used, Year of construction: 1999, 1999 | ROBUSTE KAISER S3302V Steel Trailer | Used Tipper Semi-trailer 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 14 inspection points 10 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The trailer seems okay, the two wheels were off, but they will be of course mounted for transport. The condition looks fine, with just the back tail with some holes, but no direct impact for the use, stabilizers and cylinders look well greased. The body is steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39984 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Dsdpfxjyfiuao Ai Ejwd 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902031226, empty load weight: 6,467 kg, maximum load weight: 32,533 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 90 %, color: black, Attention: The images are archive photos. The vehicle may be in use! #Chassis – haulage semi-trailer - Fifth wheel plate with replaceable 2" kingpin - Outer frame slightly inclined, new design with "Load-Lock-Profil" for attaching lashing straps - 24 t 2-speed landing gear, one-side operation, with straight lower section, with movable thrust compensation - Note: free landing leg corner clearance / free swing radius to the rear approx. 1930 mm - Pull-out ladder at rear - Side door holders - Rear underrun protection, galvanised steel - Anti-spray mud flaps according to EC Dedpfx Aie Ad N Dbe Eowd - Rear corner impact protection - Pallet stop on both sides approx. 15–20 mm high, bolted design, loading height reduced by approx. 15–20 mm - Plastic toolbox #Axles + suspension - Disc brake axles with 430 mm disc diameter - Laser-aligned axles/running gear – reduced tyre wear and fuel consumption - Air suspension #Braking system - 2-line air brake system - Colour-coded line routing for easy servicing - Spring brake parking brake - 2 non-interchangeable coupling heads at front - EBS, electronic braking system with EBS socket at front - with raise & lower valve - Vehicle stability system - Axle load detection via EBS CAN bus signal, for display in the driver's cab - AAC Basic, automatic load relief on the last axle as manoeuvring aid, up to 20 km/h, can be switched off manually #Wheels and tyres - 435/50 R19.5" make at manufacturer's discretion - Steel rims, factory silver #Electrics - 24 volt, multi-chamber lamps, yellow LED side lighting - Yellow LED side lighting coupled with indicators - 2 white front position lamps - 2 white/red rear outline marker lights - Red/yellow non-interchangeable coupling heads #Floor - Screen-printed plywood approx. 30 mm thick, on longitudinal bearers for high point loading, forklift axle load max. 7100 kg #Front wall / front corner posts - 2 580 mm high, heavy-duty steel corner posts, release device for side curtain at front wall, - "Crash-Blocker", lower inside at approx. 140 mm height with steel impact protection #Centre stanchions - 3 pairs of sliding stanchions, movable along the full length, with 4-fold insertion pockets and long pocket at the bottom - 3 pairs of stanchion positions #Insert boards - Wooden insert boards #Rear wall / rear corner posts - Steel rear corner posts up to lower edge of roof, curtain attachment with round tube and curtain tensioning ratchet - Rear portal doors, 2-leaf, each with 2 internal turn-rod locks #Curtain - Curtain with welded-in horizontal and vertical straps - Stainless steel tensioning buckles #Roof - Fliegl-Blitz-Verdeck - Sliding roof, rear end section can be folded up, roof slides from rear to front, L-shaped roof rail for automotive industry, internal width between roof rails approx. 2 490 mm, curtain colour: white, lifetime "breakage guarantee", Roof non-elastic, minimal roof rail deflection during loading and unloading #Approval - with DEKRA inspection and expert report (acc. to §13 EG-FGV) - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL, acc. to DL 9.5 and load securing acc. to VDI 2700 sheet 12 ff. - Warning sign for longer vehicle - Expert report for longer vehicle combination

Condition: used, empty load weight: 5,770 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2016, loading space length: 8,500 mm, loading space width: 2,460 mm, loading space height: 1,900 mm, loading space volume: 39 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, Drum brake EBS Payload 29,230 kg Dedox Aqi Sjpfx Ai Eewd Air lift suspension Roll tarp Platform Grain slider Folding underrun protection BPW axles Alcoa aluminium rims Lifting and lowering device Errors excepted

Condition: new, KALEPAR KLP 228V6M1 6-UNIT CAR TRANSPORT SEMI-TRAILER ● All functions operated via wireless remote control (full radio control) ● Braking system: 2S-2M Wabco EBS-E ● Suspension system: Pneumatic system ● Electrical system: 24 V Aspoeck ● Tires: 8+1 units 245/70 R17.5 ● Axles: 9-ton axle SAF or BPW ● Empty weight: from 9,000 kg to 9,500 kg ● Gross vehicle weight: 29,500 kg (11,500 kg fifth wheel load + 18,000 kg axles) ● Kingpin height: from 950 mm to 1,050 mm ● Trailer width: 2,550 mm ● Trailer loading length: 13,500 mm ● Total trailer length: 16,500 mm ● 1-year warranty COC documents (European EC type approval) NEW VEHICLE WITHOUT REGISTRATION VDI2700/8.1 Certified TÜV SÜD Also available as a 4-car 2-axle or 5-car 2-axle version Net sale for export possible. Dodpfx Ajx Dzydsi Eowd All information without guarantee. Errors and omissions excepted!

Condition: used, empty load weight: 6,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2009, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,660 mm, loading space volume: 28 m³, tire size: 385/65 R 22,5, wheelbase: 1,310 mm, color: grey, Equipment: ABS, Disc brake EBS Payload 28,400 kg Air-lift suspension Floor 6 mm - wall 5 mm ROTOS axles Dwodpfjr Uhfqox Ai Esd Alcoa aluminum rims Lifting and lowering device Folding underride guard Errors excepted

Condition: used, empty load weight: 6,250 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 08/2007, loading space volume: 24 m³, suspension: air, tire size: 445/65 R22,5, wheelbase: 1,310 mm, color: green, Equipment: ABS, Disc brakes EBS Payload 25,750 kg Platform Foldable underride guard Level adjustment left/right BPW axles Errors excepted Dwjdpswhduhjfx Ai Eod

Condition: used, empty load weight: 6,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2016, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,800 mm, loading space volume: 30 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Color RAL 9006 white aluminum Disc brake EBS Payload 31,700 kg Air lift suspension Floor 5 mm - walls 4 mm Dwodpfxjvu Ukbo Ai Esd BPW axles Alcoa aluminum rims Lifting and lowering device Grain pusher Platform Rolling tarpaulin Foldable underrun protection Errors excepted

Condition: used, empty load weight: 4,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2000, loading space length: 7,800 mm, loading space width: 2,340 mm, loading space height: 1,350 mm, loading space volume: 24 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, EBS Drum brake Payload 30,050 kg Djdpfx Asxt Rgxoi Eowd Air-lift suspension Aluminium frame Roll tarp Platform BPW axles Alcoa aluminium rims Errors excepted.

Condition: excellent (used), axle configuration: 1 axle, first registration: 03/2022, color: black, General Information Model year: 2026 Weights Unladen weight: 2,640 kg Payload: 4,860 kg Gross vehicle weight (GVW): 7,500 kg Maintenance APK (Technical Inspection): valid until 01.2027 History Number of owners: 2 Condition Technical condition: very good Dwodpfx Aiozx Up Io Eed Optical condition: very good Number of keys: 2 Product Safety Manufacturer: Oostland Automobielen Wasaweg 22, 9723JD GRONINGEN, NL

Condition: good (used), functionality: fully functional, empty load weight: 9,800 kg, maximum load weight: 27,000 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/2000, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space volume: 90 m³, suspension: air, tire size: 385.55 r 22.5, color: light grey, Year of construction: 2000, Equipment: ABS, legras semi-trailer, 21-slatted moving floor with hydraulic handling, aluminum van, steel trailor chassis, 3 axles with 1st liftable and 3rd steerable, abs, rear doors, front walkway, tarpaulin with manual side discover cover, year 2000, overhauled until 30.06.2024-CONCESSIONARY INTERDRIVE SRL-PARMA Dodpfstp Uccjx Ai Eowd

Condition: good (used), Manufacturer: SCHEUERLE Type: PYK 110 8 0 Towing capacity: approx. 130 t Dwsdpfeyb R H Nox Ai Eod Machine weight: approx. 96 t / Total approx. 130 t

Condition: new, functionality: fully functional, machine/vehicle number: VAHXXX3S4TPRS0047, empty load weight: 9,800 kg, maximum load weight: 38,200 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space width: 2,530 mm, total length: 21,000 mm, total width: 2,550 mm, total height: 1,200 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: red, Year of construction: 2026, Attention: archive images! #Chassis – haulage semi-trailer - Welded construction of high-quality steel with closed box frame, extendable by max. 7500 mm - Pneumatic locking at 850 / 1000 / 1150 / 1300 / 1500 mm and 12x at 500 mm intervals - Reinforced locking bolts + front/rear frame split; locking operated pneumatically via directional valve on trailer and via switch in tractor cab Deds Aawmvopfx Ai Ejwd - Closed, reinforced outer frame of folded U-profiles, suitable for construction machinery transport up to 24 t - Outer frame prepared for laterally extendable frame wideners to 3000 mm width - Upper coupler plate with replaceable 2" kingpin, suitable for 2- and 3-axle tractor units - Incl. intermediate support for the extended frame section - Telescopic rear support - Underrun protection integrated in rear end panel - 4 pairs of container locks recessed in floor for 1x 40 ft or 2x 20 ft container - 1 spare wheel carrier - 11 pairs of stake pockets flush-mounted in outer frame, for 80x50 mm stakes, with opening for strap or chain attachment - 3 stake socket rails across full width, welded outside the longitudinal beams, 1x in neck area, 2x in loading deck - 20 insert stakes W=80 / D=50 / L=1500 mm - Floor sockets for storing 20 stakes behind headboard - Ramp storage box mounted transversely on chassis behind the axles #Lashing points - 3 pairs of lashing eyes in side frame - 13 pairs of folding lashing rings, freely pivoting in side frame profile - 1 pair of folding lashing rings in intermediate support #Axles + suspension - SAF drum brake axles - Air suspension with raise/lower function - Staggered axle spacing 1360/1410 mm - Last axle self-steering, automatic lock when reversing via reversing light, plus additional lock function on trailer - 1st axle automatic lift axle, also electrically operable from truck and via manual button on trailer, incl. forced lowering and traction help - Air bellows pressure gauge #Braking system - Dual-line air brake system - Spring brake parking brake - 2 mismatch-proof coupling heads at front - EBS with EBS socket at front - Raise/lower valve + auto-reset function - Vehicle stability system - Axle load detection via EBS CAN bus signal, displayed in cab #Wheels + tyres - Twin tyres - TPMS tyre pressure monitoring to ECE R 141, display in tractor unit via EBS #Electrics - 24 V, multi-chamber lamps - Yellow LED side lights coupled with indicators - 2 white front position lights - 2 white/red rear outline marker lights - 2x 7-pin and 1x 15-pin mismatch-proof sockets at front - 2 additional LED work lights at rear - 1 removable rotating beacon - 1x 7-pin socket at rear - 6 lateral 7-pin sockets - 2 additional work lights recessed at top of headboard - 2 pairs of side wide-load warning boards, extendable to 3500 mm #Headboard - Steel headboard approx. 1200 mm high with sturdy steel corner posts - Incl. 2 lashing holes at top, inside and outside, in headboard corners #Paintwork - Front frame hot-dip galvanised + visible area of outer frame finish-painted in RAL 3002 carmine red

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Gooseneck * with angled front corners at approximately 45° and rear taper of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Loading Platform * Telescoping loading platform with rear taper of approximately 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approximately 2,850 x 970 x 400 mm (L x W x H) * Wheel recesses with square ladder rails approximately 15 x 15 mm, as well as widening in the lower area * A pair of fixed wheel recesses between the 1st and 2nd axles, approximately 1,610 x 970 x 400 mm (L x W x H) * Incl. 3-part removable galvanized covers over the wheel recesses (W approximately 670 mm), max. point load 5 t/piece. * Recess in the taper and extending into the loading platform to accommodate the excavator arm (approximately 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Two-part Steel Ramps Dedpfx Ajz Sh H Hji Eowd * One pair of galvanized two-part steel ramps, approximately 2,750 + 1,400 x 800 mm, with hardwood flooring approximately 48 mm thick * Ramp with hydraulically extendable and foldable ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length when in the driving position. Kingpin Supports * JOST kingpin supports (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 t (approximate test load 50 t) Axles * BPW axles and suspension, 2 axles fixed, 1 axle steerable * Technical axle load: 12,000 kg each * Electro-magnetic reverse locking system via reverse gear and manually activated Air Suspension * with lifting and lowering valve. Axle tool Tires * 235/75 R 17.5 3PMS – manufacturer of our choice * TPMS: TPMS tire pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Braking System * WABCO braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System * in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets * Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paint Finish * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Top coat with 2 layers of 2K topcoat, solid color in R

Condition: new, axle configuration: 3 axles, first registration: 01/2026, color: blue, Equipment: ABS, = Additional options and accessories = Dsdpfx Aeym Tdbsi Eowd - Air suspension = Notes = EUROMIX TO GO – immediately available new vehicles from the Porta Westfalica warehouse. Fully assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. EuromixMTP semi-trailer, 27 m³ (HARDOX), 3-axle - NEW - without registration - - Type: EuromixMTP AMT 27 (27 m³) or 24 m³ - Axles: SAF - B9 ton - 1 lift axle - ABS EBS - Air suspension - Disc brakes - Tires: 385/65 R 22.5 - Payload: 28,900 kg - Unladen weight: 6,600 kg - Body: Hardox 400 - 450 - Floor: 6 mm - Side, front and rear walls: 5 mm - Penta cylinder - CE Accessories: - Hydraulically opening rear wall - Tarp (manual or electric) - Chute for asphalt - Toolbox - Shovel and broom holder - Fire extinguisher - Work light - Sliding tarp (manual or electric), with or without tarp protection roof - Foldable underrun protection systems - Partial unloading for small areas EuromixMTP semi-trailer, 27 m³ (HARDOX) - NEW - without registration - - Type: EuromixMTP AMT 27 (27 m³) - Axles: SAF - B9 ton - 1 lift axle - ABS EBS - Air suspension - Disc brakes - Tires: 385/65 R 22.5 - Payload: 28,400 kg - Unladen weight: 6,900 kg - Body: Hardox 400 - 450 - Floor: 6 mm - Side, front and rear walls: 5 mm - Penta cylinder - CE Accessories: - Hydraulically opening rear wall - Tarp (manual or electric) - Chute for asphalt - Toolbox - Shovel and broom holder - Fire extinguisher - Work light - Sliding tarp (manual or electric), with or without tarp protection roof - Foldable underrun protection systems - Partial unloading for small areas EuromixMTP DUMP TRUCK – DURABLE AND ROBUST, READY FOR YOUR USE! Your advantages: - Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers - Chassis, body, and assembly from a single source - Fair prices - Financing in 19 countries in Europe - Trade-in of your used vehicle Your contacts: - Denis Omeragic: German, English, Bosnian, Croatian, Serbian - Henri Omeragic: German, Bosnian, Croatian, Serbian - Harun Cevik: German, English, Turkish - Jamila Azzi: French, Arabic - Olga Tissen: German, Russian - Karolina Cyburt: Polish EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica = Further information = Rear axle 1: Lift axle GVW: 44,000 kg MOT (Technical Inspection): New TÜV (German technical inspection) upon delivery Please contact Harun Cevik, Jamila Azzi, Henri Omeragic or Denis Omeragic for further information.

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2019, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 800 mm, suspension: air, tire size: 235.75 r 17.5, color: traffic orange, Year of construction: 2019, Equipment: ABS, Moeslin low-bed semi-trailer with gooseneck, used, with ramps, 3 axles with 3rd steering axle, air suspension, EBS, prepared for removable rear ramps, 120 cm front headboard, 5 ton side RUD collar hooks, twist locks for 20+20, 40 and 45 ft containers, 3 through cross-members for stanchion seats, 2 PVC toolboxes, ground clearance 84 cm, year 2019. Dealer: INTERDRIVE SRL-PARMA. Dwedpfx Aexnqvcji Eod

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2020, color: red, Equipment: ABS, Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Dwedpfx Aijx Upxxo Esd Size: 680 cm + 420 cm extendable / Total platform length: 1,100 cm Platform width: 254 cm Platform height: approx. 86 cm Gooseneck length: 330 cm Lashing eyes, stanchion sockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowloader is year 2016 but sold new in 2020 We speak German Hablamos Español We speak English

Condition: used, functionality: fully functional, machine/vehicle number: WKESD000000726905 + 906, empty load weight: 5,080 kg, maximum load weight: 34,920 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 07/2016, total length: 12,640 mm, total width: 2,480 mm, tire size: 385/55 R22,5", color: grey, The images are archive photos; the vehicle may still be in use! Krone Box Liner SDC 27 eLTU4 Suitable for various container configurations: 1x45" container, 1x40" container, 2x20" containers, 1x20" container (centrally or rear-mounted), 1x30" container (rear-mounted). Equipment: Height adjustment for tunnel-free containers, 385/55 R22.5" tyres, steel rims, extendable underrun protection, lift axle, 2x7 and 1x15-pin electrical connectors, spare wheel holder (basket version), BPW axles. The images are archive photos; the vehicle may still be in use! Dwodpfx Aiex R Uize Esd

Condition: used, empty load weight: 4,700 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 01/1999, loading space length: 7,000 mm, loading space width: 2,280 mm, loading space height: 1,280 mm, loading space volume: 20 m³, suspension: air, tire size: 385/65 R 22,5, wheelbase: 1,310 mm, color: green, Equipment: ABS, Drum brake Payload 26,800 kg with plastic floor Dwodpotdncfofx Ai Eed Folding underride guard BPW axles Level compensation left/right Errors excepted

Condition: used, empty load weight: 8,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, loading space length: 13,530 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, loading space volume: 94 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: silver, Equipment: ABS, Disc brake EBS Payload 28,000 kg Air lift suspension Sliding tarp Platform SAF axles Alcoa aluminum rims Lashing rings Dedpfx Aewv Uixji Eowd Subject to errors and omissions

Condition: used, functionality: fully functional, machine/vehicle number: VAVKSK339SZ542526, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 06/2027, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 24 m³, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5", tire condition: 100 %, color: grey, Year of construction: 2025, The images are archive photographs; the vehicle may still be in use. #Chassis -Welded steel chassis construction with rear tipping axle in weight-optimised lightweight design -Replaceable 2" kingpin -Frame designed for an unladen fifth-wheel height of approx. 1200 mm – approx. 1250 mm with air-suspended tractor unit -Support legs: mechanical steel landing legs, 2 x 12 t, single-side operation (right) #Axles -SAF-Intradisc-B9 axles with disc brakes / 430 mm -3 axles -Front axle automatically liftable = raises and lowers depending on load; also with forced lowering incl. integrated speed-limited start-off aid -Note: loading height/overall height increases by approx. 50 mm! #Electrics -15-pin socket: PIN 12 -7-pin socket: PIN 6 (positive-switched) #Wheels -6 tyres 385/65 R22.5", 6 aluminium wheels #Braking system / Suspension -Two-line air brake system -Brakes: Knorr make -EBS system -Brake/air connections with 2 single coupling heads, yellow/red -EBS/ABS socket, front -Electronic air suspension with automatic lowering device via induction switch and additional lowering lock-out via rotary switch on the semi-trailer -Without raising and lowering system -Without connecting hoses/cables to the towing vehicle #Assistance / Safety systems -Axle load display via EBS CAN bus signal, shown on the display in the cab -Tyre pressure monitoring with sensor in the wheels, shown on the display in the cab #Body -Steel body with reinforced floor plate made of special steel HB 450 (Hardox or comparable material) and reinforced top rail -Floor thickness 5 mm = continuous floor plate, wall thickness 4 mm -Front and rear walls sloped, flush all round at the top -Access steps inside the body, front left -Steel pivoting tailgate with recessed mounting and automatic mechanical 2-hook central locking, tailgate with internal discharge chute #Hydraulics -Without hydraulic connecting lines to the tractor unit -High-pressure front hoist for rear tipping #Tarpaulin -Plastic roller tarpaulin incl. aluminium tube with hand crank, without customs seal -1 removable cross support and stop bracket on the right for the roller tarpaulin -Locking device for the rolled-up tarpaulin -Tarpaulin fastening on the left (direction of travel) with 3 mounting brackets and central tensioning device at the front, without tensioning straps (quick-release fastener on the top rail); tarpaulin colour similar to RAL 9006 white aluminium #Lighting / Electrics -24-volt lighting system -2 full-LED multi-chamber rear lights -2 LED position lights, front -2 LED outline marker lights, rear -Flashing LED side marker lights -2 LED number plate lights -2 x 7-pin sockets -1 x 15-pin socket -Without electrical connecting cables to the tractor unit #Accessories / General -3 pairs of plastic individual-wheel mudguards, without spray suppression, foldable mud flaps at the rear -Folding aluminium trapezoidal rear underrun protection, unpainted with steel bracket, in accordance with EU directive -2 wheel chocks -1 tow hook bolted to the frame member, on the right (direction of travel) Dwodpfszm Ipksx Ai Eed -Noise dampers = rubber pads -Steel standing platform with aluminium safety grating, guard rail and foldable access ladder on the left (direction of travel), bolted to the chassis frame at the front -Without side impact protection Please note: archive photographs

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Djdpfx Asi Rixksi Eowd Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024321, empty load weight: 5,765 kg, maximum load weight: 29,235 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: black, The pictures are archive pictures, the vehicle may still be in use! Equipment on request! Dwsdpfewk Dk Iox Ai Ejd

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT39502038918, empty load weight: 5,438 kg, maximum load weight: 33,562 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,160 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: black, Year of construction: 2026, Attention: archive images! #Chassis tipper semi-trailer - Fine-grain steel welded construction, standard lightweight design, fifth-wheel plate with replaceable 2" kingpin - Patented "Curved" front end - 24 t 2-speed landing gear, one-side operation - Folding underrun protection with spring assistance for easier operation - Anti-spray mudflaps on last axle only - 2 towing hooks at rear #Axles + suspension - SAF disc brake axles with 430 mm disc diameter - Laser-aligned axles/running gear: reduced tyre wear and fuel consumption - Axles in off-road version - Air suspension - 1st axle automatic lift axle, additionally electrically operable from the truck, incl. forced lowering and traction help - Hot-dip galvanised lift axle mechanism – 10-year warranty against rust-through #Braking system - Dual-line compressed air braking system - Colour-coded line routing for easy servicing - Spring brake parking brake - 2 mismatch-proof coupling heads at front - 24 V EBS, electronic braking system with EBS socket at front - With raise/lower valve - Vehicle roll stability system - Automatic suspension lowering during tipping, with shut-off valve - Axle load detection via EBS CAN bus signal, display in driver's cab #Wheels and tyres - 385/65 R22.5", make at manufacturer's discretion - Polished aluminium rims, make at manufacturer's discretion - Wheel nut protection caps - TPMS tyre pressure monitoring system acc. to ECE R 141, display in towing vehicle via EBS #Electrics - 24 V, 4 x 3-chamber lamps + 1 round reversing light + 1 round rear fog light, full LED with resistor, LED number plate lighting - Yellow LED side lighting coupled with the indicators - Premium LED side marker lights - 2 white LED front position lights - 2 white/red LED outline marker lights at rear - 2 x 7-pin and 1 x 15-pin mismatch-proof sockets at front - LED work lights on both sides of the "Curved" - 2 additional LED work lights recessed into the rear #Hydraulics - Hydraulic cylinder 170–250 bar, for low- and high-pressure operation, all stages hard chrome-plated, with high-pressure swivel coupling screw sleeve (fixed part), DN 48 mm - Hydraulic operation via truck PTO - Hydraulic connection with hose and high-pressure swivel coupling screw plug DN 48 mm with knurled nut #Tipping body - Round steel body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Dsdpfxe Agtfpe Ai Eswd - Internal access ladder on front wall - Greenline – conical and aerodynamic body shape - Shovel and broom holder on outside of front wall - Membrane rear wall - Rear wall as pendulum flap with double-joint hinges, resting on the outside, with double hook locking. 2 clamping screws with toggle fasteners at bottom sides - Side walls 4 mm throughout, floor 4/5 mm, wear- and weight-optimised design - "Fliegl S.T.E.P." – swivelling front standing platform with folding ladder for side access on the left in direction of travel - "Flip Top" sliding cover, automatic rear closure as folding bow. Cover mechanism projects at the front above the front wall. Electric drive, 7-pin socket, incl. loose socket for towing vehicle, operation on the trailer and via radio remote control. Attention: archive images!

Condition: new, maximum load weight: 40,320 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Below is an excerpt of the features. Complete equipment list available upon request. GOOSENECK Dwodpfjz N Nx Rjx Ai Ejd Gooseneck with a rear slope of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. - 2-inch kingpin - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5 kg). LOADING AREA 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying at the front in the loading area (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. - On the gooseneck and at the rear, left and right, one holder each for the warning signs, including a socket. - A galvanized steel front wall. - 3 height-adjustable wooden planks. - Galvanized folding supports under the slope of the loading area. - A holder for a rotating beacon at the rear of the semi-trailer. - Height-adjustable tarpaulin superstructure, approximately 3,960 mm. - Galvanized front wall with a tensioning mechanism for the sliding curtains. - Height-adjustable by approximately 400 mm. - Roof from the EDSCHA brand, which can be moved forward on aluminum roof rail profiles. - 3 pairs of sliding rails in the loading area. - The superstructure can be hydraulically widened at the rear to the left and right by approximately 750 mm (for loading and unloading). - Sliding cover with a pivoting portal beam. - Sliding tarpaulin with approximately 700 mm of reserve in length, with tension straps at intervals of approximately 600 mm. - Height of the top edge of the superstructure approximately 3,960 mm (loaded). - Driving with the sliding cover open is not permitted and will damage the tarpaulin. - Attachment rail for aluminum ramps at the rear of the vehicle. - Control valves for the hydraulic widening of the superstructure, mounted on the right side of the semi-trailer. (± 4 kg) - White reflector tape according to EU regulations, red on the sides and rear. - Electro-hydraulic unit at the rear under the loading area. (± 45 kg) - Holder for a pair of warning signs on the front wall. - Four warning signs, approximately 400 mm extendable, approximately 423 x 423 mm, with an LED position light (± 25 kg). - On the warning signs, a holder for a rotating beacon. - 7 pairs of rail pockets for plug-in rails, approximately 100 x 50 mm, in the outer frame of the loading area (± 21 kg) - Lift axle on the front axle, controlled by TEBS-E depending on the current axle load and loading condition (± 69 kg). - 6 pairs of recessed lashing rings along the central beam (LC 5,000 daN). - 1 pair of recessed lashing rings along the central beam at the rear (LC 10,000 daN). (± 27 kg) - A painted layer of sand on the diamond plate on the gooseneck and in the loading area as anti-slip protection. - 1 LED reversing light, each on the left and right, in front of the first axle. - 2 LED work lights mounted on the rear panel. - An acoustic warning signal when reversing. ACCESSORIES - Cable for supplying the electro-hydraulic unit and/or the electric winch (approximately 35 mm², approximately 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with a plug connection (NATO-NATO). FIFTH WHEEL BRACKETS JOST fifth wheel brackets, mechanical, with a 2-spee