Used Shoe Sorter for sale (466)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Fpjdezp H Tyopfx Am Ejp Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: new, Year of construction: 2026, Putz P4 cement For on-site preparation of plasters CEMENT, SAND, LIME Pump motor 5.5 kw Mixer motor 2,2 kw 55/min Capacity for 2L6 pump approx. 25 l/min Capacity for 2L6 pump +++ 45 l/min Compressor 350 l/m Tank capacity 130 l Mixer capacity 130 l Height to mixer 118 cm Height to pump tank 71 cm Width of pump tank 64 cm Length without shoe 165 cm Weight 360 kg Included Fpodpfstuiqyox Am Eop Working hose Air hose Spray gun Hose cleaning ball Shneka 2L6

Condition: used, Castors, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, leveling roller foot -Manufacturer: Auto CFT Carrymaster, leveling roller 1 set / 4 pieces -Type: AC-1000 -Load capacity: 540 kg -Roll: Ø 72 x 31 mm -Adjustment range: 120 - 139 mm -Number: 2 sets of leveling rollers available Fpodpfsu Sv Uysx Am Eep -Price: per set -Single dimension: 140/103/H120 mm -Weight 1.6 kg/piece

Condition: used, total length: 3,700 mm, total width: 1,000 mm, total height: 1,700 mm, overall weight: 800 kg, oscillation stroke: 30 mm, grinding belt length: 1,500 mm, grinding belt width: 150 mm, power: 6.5 kW (8.84 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 2,800 rpm, No. 04513 Profile grinding machine / automatic edge processing machine Rehnen KBA Used Profile grinding machine / automatic edge processing machine for grinding edges, milling profiles, and grinding profiles in a continuous process. The machine also has a corner copying milling machine. The materials to be processed are solid wood, chipboard, and MDF. Material thickness 10 - 65 mm Material length min. 50 mm Material width min. 60 mm Feed speed 8 m/min Total power 6.5 kW Equipment: - Oscillating edge sanding device (sanding belt dimensions 150 x 1500 mm / 1400 and 2800 rpm / oscillation stroke 30 mm / contact roller and sanding shoe) - Upper milling unit - Lower milling unit - Corner copying milling machine / corner rounding milling machine - Bottom profile sanding device - Top profile sanding device - Feed chain conveyor with top pressure Fjdpfx Ajytd Tmom Espp Incl. technical documentation Incl. 6 used profile belts (must be refitted) Transport dimensions approx. 3700 x 1000 x 1700 mm LWH Weight approx. 800 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine Tagliabue TA G T12-KS-SIN 1350, year 1997. Configuration: 1pc. rubber cylinder 1pc. electronic segmented pad 1pc. cross band Cleaning unit combined brush + air blow in the outfeed. Fodpfjyzrqqsx Am Eopp Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Available immediately.

Condition: excellent (used), Brake shoe set, wheel brake, brake kit -Manufacturer: Knott, wheel brake type 20-2426/1 -Maximum permissible weight: 750 kg -Bolt circle: Ø 110 mm / M12 -Price: per piece -Quantity: 29 pieces -Dimensions: Ø 225 x 200 mm -Weight: 11.5 kg/piece Fpedpfxszbrc Ee Am Eep

Year of construction: 2019, condition: excellent (used), functionality: fully functional, TOMRA SORTING | Vibrating channel feeder Manufacturer: Tomra Sorting s.r.o. Model / Type: Vibrating channel Serial number: 1144-041091 Year of manufacture: 2019 Power: 2 kW Drive system: Power Grid s.r.o. Fedpfx Aezczugsm Ejpp Type: PG Shaker Drive Drive serial number: PG 1818-0683 Tested: 02/05/2018 Working channel dimensions: 2900 x 1950 mm Dimensions: 3000 x 2050 x 1750 mm Professional, large-scale vibrating channel feeder (commonly known as a vibratory channel) from the renowned, global leader in sorting systems and process automation – TOMRA Sorting. The device is designed for demanding tasks such as close-range transport, linear dosing, preliminary separation, and uniform distribution and feeding of a wide stream of raw material to subsequent process sections (such as optical laser sorters, X-RAY inspection systems, slicers, or IQF freezing tunnels). The machine's construction is based on a massive stainless steel / acid-resistant channel with an impressive working width of 1950 mm and a length of 2900 mm. The feeder's operation is based on inertial vibration technology, generated by a specialized, energy-efficient Power Grid Shaker Drive system with a power of 2 kW. The vibratory motion ensures that the raw material moves smoothly and inertially across the channel surface.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, feed rate X-axis: 24 m/min, working width: 1,100 mm, grinding belt length: 1,890 mm, grinding belt width: 1,100 mm, empty load weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of units: 3 Unit 1 Position: Top Unit type: Contact roller Sanding belt length: 1,890 mm Fpodpfx Amozdzras Eop Sanding belt width: 1,100 mm Roller diameter: 260 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Sanding shoe Sanding belt length: 1,890 mm Sanding belt width: 1,100 mm Roller diameter: 100 mm Roller material: Steel Motor power: 15 kW Unit 3 Position: Top Unit type: Brush unit Roller diameter: 140 mm Motor power: 0.55 kW Max. working width: 1,100 mm Infeed table length: 620 mm Outfeed table length: 1,200 mm Feed motor: 1.5 kW Feed speed: Manual Min. feed speed: 1 m/min Max. feed speed: 24 m/min Feed speed control: Stepless MACHINE DETAILS Voltage: 400 V Power: 36 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,800 x 2,450 mm Empty weight: 3,500 kg Transport packages: 2 Operating hours: 12,542 h

Condition: used, Year of construction: 1994, Main Group Vilor injection molding machines for manufacturing plastic components; previously used for production of soles and components for footwear manufacturing; option to additionally purchase molds for shoe soles with the machines; machines were operational until the end and have been unused for 4 years; good condition, require refurbishment; Fodpfxjy Egvpe Am Ejpp

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer Fodpfsy Uzhfjx Am Ejpp - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4410x3050x2727 mm Weight 13070 kg Total power requirement 172 kw Fodpfx Amev A Hf Ts Ejpp Wide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination)- Max. Working width 1300mm- Min. Working Length 490mm- Working Thickness 3-150mm- First unit: Contact roller Ø240- Second unit: Contact roller Ø240- Third unit: Ø240 pad- Total: Motor 77kw- First Unit: Motor 30kw- Second Unit: Motor 22kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 1.5kw- First unit: Contact roller shore Steel- Second unit: Contact roller shore 80sh- Third unit: Contact roller shore 55sh- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1350*2620mm- Air Pressure 0.6Mpa- Overall Dimensions 2235×3050×2600mm- Net Weight 5700 kgs- Working Table Fixed- Working table height from the ground 900mm- Voltage 400v/50hz/3phases- Air jet for each belt Optional- Automatic centering of conveyor belt YES- Press roller (rubber) YESWide Belt Sanding machine SUR-R-P1300 (Roller+Roller+Pad)- Max. Working width 1300mm- Min. Working Length 350mm- Working Thickness 10-100mm- First unit: Contact roller Ø255- Second unit: Contact roller Ø255- Third unit: pad- Total: Motor 95kw- First Unit: Motor 37kw- Second Unit: Motor 30kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 0.55kw- First unit: Contact roller shore 80sh- Second unit: Contact roller shore 70sh- Third unit: Contact roller PAD- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1320*2000mm- Air Pressure 0.6Mpa- Overall Dimensions 2175×2976×2727mm- Net Weight 7370 kgs- Working Table Fixed- Working table height from the ground 1038mm- Voltage 400v/50hz/3phases- Air jet for each belt YES- Automatic centering of conveyor belt YES- Press shoes(steel) YES

Condition: used, Technical specifications: Working width: 1150 mm 1 combined unit with pneumatic shoe Pneumatic shoe lift mechanism Paper/air blow-off Support foot before first roller Paper break protection with raised component 6 speeds for the sanding unit Roller diameter: 140 mm Maximum workpiece height: 160 mm Sanding belt dimensions: 1140x1400 mm Feed belt speed: Variable Extraction port diameter: 160 mm Electric height adjustment Analog display Safety switch Main motor power: 9 and 11 kW Voltage: 380 V Overall dimensions: Fpodpfxjx Uz Dyj Am Eop Length: 1900 mm Width: 2400 mm Height: 2180 mm

Condition: ready for operation (used), Year of construction: 1977, Operating hours: 4280h, Track shoe width: 550mm, Track gauge: 1520mm, Track contact length: 2090mm, Undercarriage length: 2080mm, Blade width: 3000mm, Machine dimensions X/Y/Z: approx. 52050mm/1900mm/1850mm, Weight: approx. 10000kg. An on-site inspection is possible. Fpedpfx Aozf Ncvom Eep

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Category type: Sander - Polisher Volume: 1 - 1 Convert Sells to: Worldwide I sell the widebelt sanding machine COSTA S CCTT 1350 Configuration 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad Fpodpfswrm Sdjx Am Eep 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed Pressure shoes for short elements Air-blow on all units Vacuum underpressure table with integrated ventilator Designed for the line with fixed working height and moving aggregates 4 motors total power 96kW Condition very good ! Available immediately

Condition: used, Year of construction: 2003, functionality: fully functional, For Sale: OTT Unimatic 25.8F Edgebander with Ligmatech ZHR 15 Return System Fedpfsygl A Aex Am Ejpp We are selling an OTT Unimatic 25.8F edgebanding machine combined with a Ligmatech ZHR 15 return conveyor table. The units are sold exclusively as a complete set (line). Key Features and Customizations: Custom Grooving Units: The machine has been upgraded with two additional milling units—one for lateral grooving from the front and one for vertical grooving from the top. It was primarily used for the production of interior door frames. Stability Upgrades: Custom-built stabilization rollers have been added to the interior side to ensure precision when processing narrow workpieces. Recent Maintenance: Last year, the glue application unit (including the roller) was completely replaced with a new one. The track pads (shoes) were also replaced. Condition and Dimensions: Condition: The machine is rarely used but has been regularly maintained and serviced by TIBO. It is currently in full working order and available for testing on-site. Dimensions: Total line length is 11m, width is 2m. Serious inquiries only, please.

Condition: used, Unwinding reel, reversing reel GSW SCHWABE Type LHD 50/800 Special Double unwinding reel Manufacturer's No. 5775, Year of manufacture approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Support discs Ø 850 mm Guide rings Ø 850 Center of reel shaft to reel base 980 mm - Reel can be manually rotated 180° with locking positions - Central spreading via rotary lever adjustment - Mechanical disc brake, adjustable brake shoes via knurled screw Fjdpjhubgwefx Am Espp Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg Good condition

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 1,400 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Fjdpfx Amshun Uis Eepp Feel free to contact us by phone to find a suitable solution for your application.

Condition: ready for operation (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM1400 2.000 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Fpodpfx Amohun U Us Ejp Magnet dimensions: 1.400x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 10 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: excellent (used), Various new honing stones, honing mandrels, guide shoes, and Sunnen accessories. Fpedsigvraspfx Am Eop Used Sunnen honing mandrels, PG800-EM.

Condition: used, Parquet mosaic production line length 160 mm: 1. Schroeder mosaic press MTA-2 PE 1992 r 7,3 KW 2. Schroeder feeder PST 1992 r 3. Schroeder feeder SB35 B 1992 r 4. schroeder feeder BA-2 1992 r 5. schroeder feeder BA-2 1992 r Fedpfx Amjtp I Hce Ejpp 6. Schroeder feeder SB35 B 1992 r 7. WENIG GMBH P 120 double edging machine 8. WENIG GMBH P121 Thicknessing machine with cutters ( not Hollowing heads) 9. WENIG GMBH P122 multi-saw 10. WENIG GMBH 135 sorter - sorting system for 3 classes with interchangeable magazines (containers). Magazines 200pcs.

Condition: used, thickness of jaw 250 mm height of jaw 80 mm clamping width 340 mm Fsdpfx Aotqqpkem Eepp = hydr. machine vice (pos.1) - with hand crank and 3 clamping shoes -

Condition: good (used), Year of construction: 2007, 14 pcs. long goods racks, Bito, length 3.50m, 2 tons / cassette, stackable - used- : Fpjdpfx Ajth S H Hsm Ejp Price ex location: 6.350.-€ (net) incl. loading! Priority complete sale! Unit price for small quantities on request! Manufacturer: Bito Type: Long goods cassette Year of construction: 2007 Length: 3,5m Inner width: approx. 49.5cm Interior height: approx. 30cm Maximum payload: 2,000kg Max. Load: 8.000kg Max. Stacking height: 5-fold With crane eyes and fork shoes Stackable Own weight: approx. 100kg / piece New price: approx. 1.200.-€ / piece Available: immediately Condition: good Location: 79108 Freiburg

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine Tagliabue TA G-13-KS-DX 1350, year 1997. Configuration: 1pc. rubber cylinder 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Fsdeyzrpmjpfx Am Eepp Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 2 motors total power 40kW Condition very good ! Available immediately.

Condition: excellent (used), functionality: fully functional, Odenberg / Tomra Potato Sorting Line Brand: Odenberg / Tomra Control System: “Tomra” Touchscreen Panel Technical Specification: - Optical Sorter: Odenberg with mechanical finger ejection system - Infeed Hopper: steel construction, with side and top inlets - Conveying System: rising inclined conveyor belt, overhead feed conveyor belt - Water Section: 2 submersed conveyor belts - Feeding Section: cross-flow feed with vibrating grate and conveyor belt Fpodpfx Amoyku I No Eep - Installation footprint: Total usable floor area: 10,500 x 4,750 mm Set includes platforms with slatted flooring An advanced potato sorting line based on Odenberg and Tomra optical technology, providing a complete solution for modern processing facilities. At the heart of the system is a precision optical sorter with mechanical ejection, operated by the intuitive Tomra interface, enabling rapid product selection by quality and size. A unique feature of the line are the two underwater conveyor belts, ensuring extremely gentle handling of the produce and minimizing bruising and mechanical damage.

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Chipbreaker on the right and left spindles. Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Track shoe width 50 mm for processing narrow parts. Fpedpfx Amezfprko Eop Machine in perfect condition, ready for use.