Used Shoe for sale (368)

Condition: used, Year of construction: 2024, machine/vehicle number: 606.07.081.24, functionality: fully functional, operating hours: 332 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 15 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 152 mm, cutting width (max.): 1,000 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2,000 rpm, total length: 3,200 mm, total width: 3,400 mm, total height: 1,700 mm, overall weight: 1,300 kg, table height: 900 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, saw blade guard, Format 4 Format circular saw Kappa 590 x-motion - 7.5 kW, variable speeds 2000-5000 rpm. - Year of manufacture: 2024 - Rip fence 3200 mm, swiveling 90°+–45°, 2 fence jaws - Extension table 1250 x 650 mm - Format sliding table "X-Roll", cutting length 3200 mm, trimming shoe - Parallel fence manually 1000 mm cutting width Pgsdpszairuefx Abzon - Upper guard, hood for 90° and hood for miter cuts, height-adjustable and can be swiveled away from the working area - kappa 590 x-motion control with touch function in the control panel at eye level - Saw blade diameter 250–450 mm, maximum cutting height 152 mm - Position-controlled height adjustment & angle adjustment +–46° - Circular saw with table extension up to 1200 mm behind the saw blade axis, steel powder-coated - Weight: 1300 kg - Total operating hours: 332 h Price ex works, free loading.

Year of construction: 2022, condition: good (used), functionality: fully functional, This is a drying and disinfection system for boots and shoes from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social rooms. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely using ozone and therefore does not require any chemicals. Simultaneous drying takes place using warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimum air circulation. Warm, dry boots increase the well-being of your employees and prevent illness through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. Pgjdpfxett Sguo Abzjn OUR USED APPLIANCE SERVICE FOR YOU - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Technical data: - External dimensions WxDxH: 360x470x1950mm - Electrical connection: 230V, 50Hz, 0.55kW - Serial number: 2892/22-60623 - Year of construction: 2022 - Capacity: 5 pairs of shoes Condition: Used, tested and fully functional VERSAND / SHIPPING: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Year of construction: 2022, condition: good (used), functionality: fully functional, This is a drying and disinfection system for boots and shoes from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social rooms. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely using ozone and therefore does not require any chemicals. Simultaneous drying takes place using warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimum air circulation. Warm, dry boots increase the well-being of your employees and prevent illness through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. Pjdpott Sf Esfx Abzjgn OUR USED APPLIANCE SERVICE FOR YOU - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Technical data: - External dimensions WxDxH: 360x470x1950mm - Electrical connection: 230V, 50Hz, 0.55kW - Serial number: 2893/22-60623 - Year of construction: 2022 - Capacity: 5 pairs of shoes Condition: Used, tested and fully functional VERSAND / SHIPPING: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Year of construction: 2017, condition: like new (used), MMM Uniclean® PL II 15 Single-chamber cleaning and disinfection unit (as new condition, year of manufacture: 2017) Product description (source: MMM) High-performance single-chamber cleaning and disinfection unit for the thorough processing of large quantities of medical devices, such as general surgical and MIS instruments, anesthesia materials, ophthalmological and dental surgical instruments, containers, receptacles, bowls, trays, surgical shoes, and other utensils. Ease of operation Loading baskets can be easily loaded from all four sides. Easy-Move rollers: Even heavy baskets can be moved easily with little effort and positioned precisely in the chamber. Glass control panel – easy to clean Rubberized CoolTouch handles allow hot baskets to be handled. Podpfjimdtvex Abzsgn Frame and front panel made of stainless steel 1.4301 (AISI 304) Chamber and all product-contacting fixed piping in AISI 316L Glass doors with double glazing and tempered glass Glass panel with integrated 5.7" color touch screen on the loading side Large remaining cycle time display and door switch on the unloading side TECHNICAL DATA Model: Uniclean PL II 15-2 EL (= Electric, not steam-operated) Single or double door: Double door Voltage: 380 – 400 V / 50 Hz Heating: Electric Equipment Machine VE water preheating tank (Tank 1) VE water recovery tank Sound insulation of the front of the unit (Tank 2) Sound insulation of the front of the unit Sound insulation of the side wall Exhaust gas economizer Exhaust gas backdraft preventer Conductivity measurement system Monitoring of HEPA filter Potential-free contacts Recirculation system Connection to the customer’s media supply Hot water connection Dosing system 3 suction lances 3rd dosing pump incl. accessories Roller conveyor Semi-automatic transport Basic module automatic roller conveyor Automatic loading roller conveyor preparation Automatic unloading roller conveyor preparation Batch documentation and machine connection Barcode reading system UPL II (cable) Barcode scanner for tray recognition We assume no liability for the accuracy, completeness, and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Category type: Sander - Polisher Volume: 1 - 1 Convert Sells to: Worldwide I sell the widebelt sanding machine COSTA S CCTT 1350 Configuration 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed Pressure shoes for short elements Air-blow on all units Vacuum underpressure table with integrated ventilator Designed for the line with fixed working height and moving aggregates Psdpswrm Sdjfx Abzegn 4 motors total power 96kW Condition very good ! Available immediately

Condition: new, Work table adjustment in the infeed using a parallelogram system Display for chip removal via a degree scale Simultaneous height adjustment and locking of the work tables, complete with anti-tipping device Quick changeover system for switching from planing to thicknessing (CE version) Pgsdpod Akyzofx Abzsn via a special support for opening the planing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic support "READY" Electronic control includes: – Adjustment of the thickness table – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hour counter Automatic star-delta starter for the main motor Machine table with height adjustment via 4 steel leadscrews Rubber-coated infeed roller in the outfeed Interchangeable feed rollers Segmented pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro-safety switch for correct positioning of the planing tables and extraction hoods Planing guard (CE version) Automatic motor brake on the main motor Thermal overload switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data: Usable working width [mm] 520 Total table length [mm] 2310 Knife shaft diameter [mm] 120 Motor power [kW] 9.0 Hz 50, 400 V Planing shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminum planing fence [mm] 1200 x 190 Planing fence angle adjustment from 90° to -45° Min./max. Planing height [mm] 3 / 250 Feed speed, thickness [m/min] 5-8-12-18 Extraction hood diameter, planing [mm] 120 Extraction hood diameter, thickness [mm] 120 including options - "TERSA" knife shaft with disposable, reversible knives - pivoting auxiliary fence for thin workpieces

Condition: reconditioned (used), Year of construction: 2005, through feed moulder with 9 spindles and SCM control 100 PC control system Max. Working width 240 mm Min. Working width 25 mm Max. Working height 120 mm Min. Working height 10 mm Min. Work piece length 640 mm feed speed 6 - 36 m/ min, variabel Spindle DM 40 mm Usable length vertical spindles 140 mm Usable length horizontal spindles 250 mm Axial adjustment vertical spindles 0 - 80 mm Axial adjustment horizontal spindles 0 - 45 mm Min and max. Tool DM 100 - 220 mm Min. And Max. Tool DM on planer spindle 120 - 140 mm Profiling capacity of 2. Bottom horizontal spindle with tool DM 200 mm = 15 mm Power feeder motor 5,5 kW DM feeder rollers 140 mm Infekt table length 2500 mm Quick adjustment indeed table and fence 10 mm Required suction capacity 7500 m3/ h Compressed air requirement 6 - 10 bar Weight approx 6000 kg Dimension approx. L x W x H = 6300 x 1620 x 1655 mm Spindle arrangement: Bottom horizontal spindle Motor 11,0 kW Spindle Speed 6000 RPM Right vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Left vertical Spindle Motor 7,5 kW Spindle Speed 8300 RPM 2. Right vertical spindle Motorleistung 7,5 kW Wellendrehzahl 8300 RPM 2. Left vertical spindle Motor 7,5 kW Spindle Speed 8300 RPM Top horizontal spindle Motor 11,0 kW spindle speed 8300 RPM 2. Bottom horizontal spindle Motor 12,0 kW spindle speed 8300 RPM 2. Top horizontal spindle Motor 11,0 kW spindle speed 8300 U/min 3. Bottom horizontal spindle Motor 7,5 kW spindle speed 8300 U/ min SET - UP quick set up system reduces down times Power Lifting of the feed system and upper spindle units with 100 PC control Pneumatic opening of safety hood full Kardan feed system Feed speed variable Segmented pressure shoe before upper horizontal spindle with parallelogram movement and pneumatic pressure Fine adjustment of outfield table Pneumatic blocking of spindle in working position incl. ZIWO CL 15 automatic feeding unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Pgodpfx Asg Umrmjbzon • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: Pjded E Ixzjpfx Abzegn “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Podpfxsv D H Sie Abzsgn Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. Psdpfovgurcjx Abzsgn The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: used, OTT MEGAtronic 11 Lacquer Wide-Belt Calibration and Fine Sanding Machine 1st sanding unit: calibration roller, diameter 150 mm, 90° Shore 2nd sanding unit: electronically controlled, segmented membrane sanding pad Working width: 1100 mm MEGA – Lacquer sanding package Feed speed steplessly adjustable: 3–15 m/min Motor power, 1st sanding unit: 11 kW Motor power, 2nd sanding unit: 11 kW, with 2nd belt speed of 4.5 m/sec Additional special equipment: Vacuum table Vacuum generator 3 kW Abrasive belt oscillation Rigid sanding shoe for solid wood and frame sanding Podpfoy Nl Skex Abzjgn Machine is WORKSHOP-OVERHAULED, in TOP CONDITION, from a crafts business Available from stock in Lieboch

Condition: new, Roll splitter for shredding waste rolls of paper and film - motor power 9kW - PLC-based control, two-hand safety circuit D2h9jg7 - Cutting force 35to - Splitting table straight version - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm - Machine weight approx. 4 tons -Color RAL 5012 - light blue - Hand protection grille in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Pgedpfxetvgzbe Abzjn Stock item - immediately available

Condition: new, - Motor power: 9 kW Pgjdpfx Abegl Ac Sezjn - Control system: PLC-based, with two-hand safety circuit - Cutting force: 35 tons - Splitting table: straight design - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm - Machine weight: approx. 4 tons - Color: RAL 5012 – light blue - Hand protection guard in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request.

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit - Cutting force 35to - Splitting table straight design - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm Bednmofn0d Podpfstvm A Tjx Abzogn - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Ordered goods Price and further information on request

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm Pjdpfx Absxdxfqozsgn - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: used, Year of construction: 1996, functionality: fully functional, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, height adjustment type: electric, type of input current: three-phase, input voltage: 400 V, table length: 1,970 mm, number of spindles: 5, extraction connection diameter: 140 mm, Equipment: cabin, - German-made - grooved table - year of manufacture: 1996 - feed rollers integrated in the table TECHNICAL SPECIFICATIONS: - planing width: 230 mm - planing height: 160 mm - grooved table - spindle diameter: 40 mm 1st lower spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th lower spindle: 7.5 kW - feed speed continuously variable: 6-36 m/min - feed motor power: 5.5 kW - six upper steel feed rollers - two upper rubber feed rollers - three feed rollers integrated into the table - pneumatic feed pressure - pneumatic shoe pressure - spindles with brakes - infeed table length: 1970 mm - electric height adjustment - central lubrication (split) - extraction port diameter: 140 mm Pedpfx Ajy Hq Hnebzegn Machine dimensions: - (length / width / height): 410x200x180 cm - weight approx. 3000 kg

Condition: new, Year of construction: 2024, Working width: 950 mm Workpiece height min: 4 mm Workpiece height max: 170 mm Height adjustment: electronic Workpiece thickness display: digital Control unit: Fox 500 KTR Units: 1 1st unit: Combination unit for calibrating and sanding / Bevel-grooved steel roller, Ø 120 mm, with fine height adjustment / Hard sanding shoe with graphite support Dust removal brush: no Pjdeknyhlopfx Abzegn Motor power: 7.5 kW Dust extraction connection: 140 mm Machine length: 1388 mm Machine width: 1545 mm Machine height: 1668 mm Weight: 660 kg

Condition: new, Year of construction: 2023, Working width: 1100 mm Workpiece height min: 4 mm Workpiece height max: 170 mm Height adjustment: electronic Workpiece thickness display: digital Units: 2 1. Unit: helical-grooved steel roller, Ø 120 mm, fine adjustment for calibration, pneumatic on/off for the roller 2. Unit: combination unit with fine-adjustable working height for calibration and fine grinding: rubber-coated roller, Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on a replaceable insert, and pneumatic on/off for the roller Segmented grinding shoe: elastic, sector spacing 56 Control: FOX 500 KTR Dust extraction brush: no Motor power: 15 kW Dust extraction connection: 2 x 140 mm Machine length: 1650 mm Pgodpfjirmg Usx Abzen Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg

Condition: used, mileage: 979,000 km, power: 427 kW (580.56 HP), first registration: 04/2015, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: mechanical, emission class: euro6, loading space length: 6,438 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, parking heater, Manufacturer Scania Model R580 8x4?4 Crane Kesla 21127 / Woodtransport / Holztransport Year 2015 Condition Good Serial Number YS2R8X40005374699 Ref. nr. 1087983 Reg. date: Engine: V8 Hk: 580 Km: 979000 Pgsdpfx Abexiuc Nezjn Gearbox: Manual GRS0905 Eurotype: 6 Diesel tank: 1 Tank liter: 400 Cabin heater: ? Air conditioning: ? Number of beds: 2 Cabin type: CR19 Topline Leather shoes: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 315/80 - 315/80 - 385/65 Tire % back 20 - 60 - 20 - 20% Front suspension: Air Suspension rear: Air Wheelbase: 3900 mm Toolbox: ? Total weight: 32000 kg. Weight: 16610 kg. Load capacity 15390 kg. Crane Manufacturer: Kesla 21127 Outrigger extension (hydraulic): 1

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Pgodpfx Asyu Srmsbzsn Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: used, Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Podpfx Aboy D Nicjzogn Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: ready for operation (used), Year of construction: 2019, Door panel postforming line Kraft / Costa / IMA / Bürkle / Homag Coating line consisting of: Gantry feeder Brand: Kraft Year of manufacture: 2019 Technical specifications - With vacuum lift - 2 feed roller conveyors - One transport roller conveyor for onward transport Wide-belt sanding machine Brand: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 Consisting of: Wide belt sander (sanding from below) Technical specifications - Contact roller - Electronic shoe sanding unit - Cleaning brush - Intermediate conveyor belt, length approx. 3000 mm Wide-belt sander (sanding from above) Technical specifications - Identical equipment Complete formatting, laminating, and postforming line Consisting of: Roller conveyor system Brand: Kraft Year of manufacture: 2019 Technical specifications - 3 individual elements - Centering station Double-end profiler Brand: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical specifications - Equipped with feed conveyor and alignment station - Scoring saw at the bottom - Splitter - Flazer - Prism cutter - Joining cutter - Cross-edge milling unit - 3 profiling milling units - Brushes Laminating system consisting of: Feed conveyor belt Brand: Kraft Year of manufacture: 2019 Glue applicator Brand: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical specifications - With infeed table, manufacturer: Kraft - Steel platform with stairs and various pumps - Glue melting unit GWK Eco 03A Infeed Table for Laminating Machine Brand: Kraft Year of manufacture: 2019 Laminating Machine Brand: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical Specifications - New Siemens Simatik KMG Touch control system - Bürkle GLK calender - Includes film holder and saw for trimming excess material - Working width 1300 mm - 2 GWK temperature control units - Column-mounted swivel crane for loading paper rolls - Unloading conveyor belt Postforming machine Brand: Homag Technical specifications - Infeed table - With 2 saw units (horizontal and vertical) - Intermediate buffer with 4 levels - Infeed to the postforming machine - 2 identically configured processing sides with gluing - PU pre-melting unit Nordson / VersaBlue, built in 2020 and 2004 - Pressure zone with turret magazine for various profiles - Various milling units and buffing brushes - 2 cooling units BEKO Bekoblizz LC, built in 2020 Conveyor belt with inspection system - Swivel arm with vacuum suction cup - Inspection station for visual inspection of the workpiece Portal destacking Brand: Kraft Technical data - With vacuum portal and 3 destacking stations Automatic cross-transport cart Brand: Kraft Year of manufacture: 2018 Technical specifications - Roll width: approx. 1400 mm - Roll length: approx. 2800 mm Pjdpfx Ajy Dr Hqebzsgn Used door panel postforming line Kraft / Costa / IMA / Bürkle / HomagCoating line consisting of:Gantry feederBrand: KraftYear of manufacture: 2019Technical specifications- With vacuum lift- 2 feed roller conveyors- One transport roller conveyor for onward transportWide-belt sanding machineBrand: CostaType: KK7 CT CT 1350Year of manufacture: 2018Consisting of:Wide belt sander (sanding from below)Technical specifications- Contact roller- Electronic shoe sanding unit- Cleaning brush- Intermediate conveyor belt, length approx.

Year of construction: 2004, condition: ready for operation (used), Used painting line Bütfering / Belting/ Heesemann / Bürkle / Elmag / Cefla / Venjakob Painting line consisting of: Vacuum feeding system Technical specifications - 2-lane - Roller width: approx. 1000 mm Wide-belt sander Brand: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical specifications - Working width: max. 1350 mm - Vacuum feed belt - Electronic sanding shoe Belt conveyor system Brand: Belting Year of manufacture: 2019 Technical specifications - Dimensions: 6100 x 1000 mm Dust extraction system Brand: Heesemann Type: EA2 Year of manufacture: 1990 Coating machine Brand: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Continuous drying tunnel Brand: Bürkle Technical specifications - With UV lamp Coating machine Brand: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Brand: Elmag Type: Ti166-35+2iVM1-65 Technical specifications - Equipped with 2 UV lamps Wide-belt sander Brand: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Podpfey Dr Alex Abzegn Technical Specifications - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-deck intermediate buffer Technical Specifications - Deck size: 3000 x 1350 mm Dust extraction system Brand: Cefla Type: TN3500/TT Year of manufacture: 2004 Coating robot Brand: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical specifications - Passage width: approx. 1350 mm - Automatic spray arm with 4 spray heads - Pump station with 5 Graco coating pumps Intermediate conveyor Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Continuous-flow oven Brand: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV Drying Tunnel Brand: Venjakob Year of manufacture: 2008 Technical Specifications - Infeed conveyor belt - 4 UV drying lamps (1 at the bottom, 3 at the top) - Mounted on 2 Venjakob belt conveyors Belt Conveyor Brand: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Brand: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical specifications - With alignment table - 3 sanding units for crosswise and lengthwise processing of door leaf edges Belt conveyor Manufacturer: Belting Technical specifications - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Door leaf turning system Manufacturer: Kraft Year of manufacture: 2018 Platform scale Brand: Ose Year of manufacture: 1972 Technical data - Weighing range: 8-100 kg Contact us for further details regarding this machine. Note: The technical data and descriptions are copies of the original order confirmation. The . Used painting line Bütfering / Belting/ Heesemann / Bürkle / Elmag / Cefla / VenjakobPainting line consisting of:Vacuum feeding systemTechnical specifications- 2-lane- Roller width: approx. 1000 mmWide-belt sanderBrand: BüfteringType: Classic 213EBYear of manufacture: 2000Technical specifications- Working width: max.

Condition: ready for operation (used), Year of construction: 1985, Used folding machine line consisting of: Lifting table with pusher Roller conveyor Feeding unit Transfer system and workpiece pre-cleaning Double-end profiler Brand: Homag Type: FG63 Year of manufacture: 1985 Technical Specifications - With adhesive strip application - Machine for profiling and folding trim strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding pre-folded workpieces - Sliding shoe for pressing - Discharge table for material removal Electric scissor lift table Brand: Altek Year of manufacture: 2014 Technical specifications - Max. load capacity: 1000 kg - With integrated roller conveyor - Dimensions: approx. 3100 x 1000 mm - With height sensor for automatic detection of stack height and corresponding cycle timing Tilting skip Brand: Bauer Type: WU-R 1500 Year of manufacture: 1995 Technical specifications - Capacity: 1.5 m³ Crosscut and miter saw Brand: Bosch Year of manufacture: 2016 Industrial vacuum cleaner Brand: Nilfisk Type: Attik 751-11 3 Panel Transport Carts Brand: Fetra Panel Rack Brand: Robering Type: Dexion D90 Plus Year of manufacture: 2018 Technical Specifications - Consists of 5 uprights - Upright height approx. 4000 mm - Max. permissible shelf load: 3000 kg - Total of 16 crossbeams, length 2700 mm Lot of single-sided pallet trucks - Width approx. 1800 mm - Load depth: between 800 and 1000 mm - Approx. 9 units Aluminum folding ladder Cross-slider - Total length approx. 3000 mm Pgjdey Driropfx Abzsn - Roller width approx. 800 mm Used folding machine lineconsisting of:Lifting table with pusherRoller conveyorFeeding unitTransfer system and workpiece pre-cleaningDouble-end profilerBrand: HomagType: FG63Year of manufacture: 1985Technical Specifications- With adhesive strip application- Machine for profiling and folding trim strips- Milling station on both sides- Control system: Siemens Simatic Touch- Glue application unit- Folding unit for folding pre-folded workpieces- Sliding shoe for pressing- Discharge table for material removalElectric scissor lift tableBrand: AltekYear of manufacture: 2014Technical specifications- Max. load capacity: 1000 kg- With integrated roller conveyor- Dimensions: approx. 3100 x 1000 mm- With height sensor for automatic detection of stack height and corresponding cycle timingTilting skipBrand: BauerType: WU-R 1500Year of manufacture: 1995Technical specifications- Capacity: 1.5 m³Crosscut and miter sawBrand: BoschYear of manufacture: 2016Industrial vacuum cleanerBrand: NilfiskType: Attik 751-113 Panel Transport CartsBrand: FetraPanel RackBrand: RoberingType: Dexion D90 PlusYear of manufacture: 2018Technical Specifications- Consists of 5 uprights- Upright height approx. 4000 mm- Max. permissible shelf load: 3000 kg- Total of 16 crossbeams, length 2700 mmLot of single-sided pallet trucks- Width approx. 1800 mm- Load depth: between 800 and 1000 mm- Approx. 9 unitsAluminum folding ladderCross-slider- Total length approx. 3000 mm- Roller width approx. 800 mmNote:The technical specifications and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, This listing is for 1 of 2 Watson Marlow 530S Peristaltic Pumps The units are in full working condition and ready for immediate release. Overview & Function The Watson‑Marlow 530S is part of their 500 series cased peristaltic/process pumps. Industrial Provider It’s used for precise fluid metering, dosing, or transfer in laboratory, industrial, pharmaceutical, food & beverage, water treatment, and other process environments. As a peristaltic pump, it works by compressing a flexible tube (or tubing element) with rollers or shoes, pushing fluid forward while the fluid never contacts moving mechanical parts (only the tubing). This gives isolation and reduces contamination risk Because fluid only contacts tubing, the risk of contamination or cross‑contamination is low, and maintenance is relatively straightforward (replace tubing / elements). Pgjdpfx Ajxv Ak Isbzsn Very good turndown ratio (i.e. ability to dial down flow finely) thanks to the wide speed control range. The user interface is designed for operational simplicity and clarity. Offers flexibility in control: it supports analog and digital remote control, SCADA integration, and bus communication. Ability to use different pumpheads and tubing materials to suit pressure, chemical compatibility, and flow requirement