Used Shoe for sale (368)

Condition: used, fork carriage width: 150 mm, fork length: 2,000 mm, fork width: 90 mm, fork thickness: 67 mm, Length: 2m + 9cm Width: 15cm Width at the front (at the tip): 9cm Depth at the front: 2.2cm Djdpfx Akez S Rh Es Ajcp Depth at the rear: 4.5cm + 8mm

Year of construction: 2000, condition: used, Complete Production Line for Shoe Lasts Manufacturing We offer a complete technological production line for shoe lasts manufacturing — a fully integrated and coherent industrial system designed for reliable, continuous production. The entire line is maintained in very good technical condition. All machines are characterized by: Dcodpfeza Ak Rjx Ak Aop High manufacturing quality Robust industrial construction Low wear level Long-term operational reliability Stable production performance This production system enables a continuous and optimized workflow — from raw material preparation, through semi-finished components, to final machining and assembly processes. The line represents a complete and proven industrial process, ready for immediate operation in manufacturing conditions. European Industrial Quality All equipment originates from renowned Italian manufacturers, including: ARBO Oleodinamica Donzelli Gruppo San Rocco Meber These manufacturers are recognized for: Precision engineering Durability Industrial-grade performance Proven European manufacturing standards LINE STRUCTURE 1. Raw Material Preparation Section 1.1 Granulation Machine 1.2 Material Mixer 2. Semi-Finished Production Section 2.1 Injection Molding Machine (for blanks) 2.2 Standardization Unit 3. Pre-Machining Section 3.1 Last Cutting Saw 3.2 Pre-Copy Milling Machines (2 units) 3.3 Finishing Copy Milling Machines (2 units) 4. Special Machining Section 4.1 V-Cut Milling Machine 4.2 V-Cut Saw 4.3 French Cut Saw 4.4 French Cut Milling Machine 4.5 Chain Milling Machine for Locks 4.6 Pin Insertion Machine for Locks 5. Drilling, Machining & Assembly Section 5.1 Bushing Drilling Machine 5.2 Bushing Installation Machine 5.3 Multi-Spindle Drilling Machine for Pins 5.4 Last Plate Cutting Machine 5.5 Punching Machine 5.6 Secondary Punching Machine 5.7 Steel Processing Machine 5.8 Plate Forming Machine 5.9 Automatic Trimming Machine 5.10 Last Assembly Tool 6. Finishing Section 6.1 Toe Trimming Machine 6.2 Heel Trimming Machine 6.3 Grinding Machines (2 units) 6.4 Cleaning Machines (2 units) 7. Recycling & Waste Management System 7.1 Chip Grinding Machine 7.2 Industrial Dust Extraction System 8. Tooling Section 8.1 Knife Sharpening Machine

Condition: good (used), axle configuration: 2 axles, first registration: 11/2018, loading space length: 7,350 mm, loading space width: 2,500 mm, loading space height: 2,310 mm, total length: 9,420 mm, total width: 2,600 mm, total height: 3,860 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 2, Tare weight: 6770 kg, Gross vehicle weight: 18000 kg, Type of chassis: Full chassis, ABS, EBS, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Supra 850 u, Refrigeration unit: Diesel/electric, ATP status: ., Wall thickness: 35 mm, Type of cooling: Cooling, Day/night cooling: Day/night cooling, Axle type: VALX, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 2000 kg, Tail lift manufacturer: Bar cargolift, Tail lift material: Aluminum, Tail lift size: 240x256, Battery for ramp = Further Information = General Information Dodpfx Akez Eyrfs Aecp Cab: Day cab Registration number: KLEYN1 Powertrain Fuel type: Diesel Transmission Transmission: Manual Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 10 mm; Tire tread right: 13 mm Axle 2: Tire tread left: 10 mm; Tire tread right: 9 mm Weights Unladen weight: 6,770 kg Payload: 11,230 kg GVW: 18,000 kg Functional Tail lift: Bar cargolift, Rear door, 2000 kg Height of loading platform: 143 cm Refrigeration unit: Diesel and electric Wall thickness: 35 mm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: €677 per month (default, 60 months); Inquire for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • Good price • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Djdpfx As Advapjk Ajcp TECHNICAL DETAILS POLISHING UNIT Polishing diameter: approx. 200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 900 mm Height: 1,500 mm Weight: 150 kg

Condition: used, functionality: fully functional, This is a drying and disinfection system for boots and shoes manufactured by PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovative solution for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. Disinfection is carried out safely using ozone, thus eliminating the need for chemicals. Simultaneous drying is achieved through warm air, ensuring a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically designed for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's recommended retail price: €2,721 net = €3,238 gross Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 TECHNICAL DATA: External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2892/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional SHIPPING: Delivery or self-collection by arrangement Dedpfx Aozxn Rfsk Aocp Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would like to request advice, or would like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is subject exclusively to our general terms and conditions (GTC).

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed rate: approx. 10 m/min Noise protection hood Dodpfxozzqwmj Ak Ascp Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch EC+ control for easy operation of the machine 4 programs can be saved. Machine in Highflex version, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain conveyor central lubrication, pneumatic manual Glue pot quick-change device, one glue pot currently installed Top pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with diamond cutters, sharpened Contact heating shoe for preheating the panel Gluing section with automatic edge feed for rolled material up to 3 mm, switchable for simultaneous and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cut-off saw with 2 motors, straight cut or bevel cut (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfering and radius Corner rounding cutter R2 with diamond cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened; saws have been sharpened, diamond jointing cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling milling unit has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good. Very good condition, see original photos. Machine dimensions approx. 4550 x 1250 x 1550 mm (L x W x H) Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Dedpjzn Icysfx Ak Aecp Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: used, functionality: fully functional, This is a boot and shoe drying and disinfection system from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is an innovation for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. The disinfection is carried out safely using ozone, thus consuming no chemicals. Simultaneous drying is achieved using warm air, which ensures a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's list price: €2,721 net = €3,238 gross Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul/inspection and expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Djdpfezxn Sijx Ak Aecp TECHNICAL DATA: External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2893/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions.

Condition: ready for operation (used), functionality: fully functional, working width 950 mm calibrating unit with metallic roller Dedjzz Nkropfx Ak Ajcp combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells two conveyor feed speeds motor power 11 kW year of manufacture 2000 power supply 400V weight 975 kg

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning Dcedsugvxxspfx Ak Aep - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Djdpfjzc D Aaox Ak Aocp Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter Dcedpfx Aksqu Sc He Aep 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: good (used), Year of construction: 1998, working width: 1,350 mm, power: 209 kW (284.16 HP), Costa line with 3 lower and 3 upper rollers, one steel, one rubber, and one shoe roller. The machine is in good condition and was removed from a clock manufacturing company that produces pine wood furniture. Dcsdpfx Aey Uahwjk Aep

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Djdpfx Aozp H Tyek Aocp Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 900 kN, controller manufacturer: ENGEL, controller model: cc300, This 4-axis Engel Victory 200/90 tech + Viper 6 RC300 was manufactured in 2015. It features a clamping force of 90 tonnes and an injection unit size of 200. The machine includes a central ejector system and a magnetic clamping system for enhanced efficiency. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/90 tech + Viper 6 RC300 hydraulic injection moulding machine we have for sale. Contact us for further details. Dcsdo Af Tyzepfx Ak Asp ENGEL Victory 200/90 tech- Clamping Force: 90 tonnes - Injection Unit Size: 200 - Total Operating Hours (Machine): 15,903 h - Operating Hours in Automatic (Robot): 12,086 h - Clamping Platen Execution: Tie-bar-less standard platen according to EUROMAP - Centring Diameter: 125 mm EUROMAP - Magnetic Clamping System: Stäubli magnetic clamping plate - Ejector System: Central ejector with ejector safety interface - Heating System: 230 V ceramic cylinder heating bands ENGEL Viper 6 RC300- Maximum Manipulation Weight (Payload): 5 kg- Robot Axis Strokes: X-Stroke: 400 mm Y-Stroke (Single): 1,000 mm Z-Stroke: 2,360 mm C-Axis: Compact pneumatic rotary axis, 0–90° pivot, torque 6 Nm- Minimum Deposit Height: 1450 mm (center of unswiveled C-axis, without gripper head and part) - Max. Vertical Part / Gripper Head Size (TV): 200 mm - Maximum Total System Height: 4100 mm (handling and machine incl. machine shoes) - Part Deposit Side: Machine rear side - Entry Movement: Vertical

Condition: used, Year of construction: 2015, operating hours: 10,900 h, functionality: fully functional, overall weight: 19,000 kg, Model: Fine Shredder Doppstadt AK 510 BioPower Year of manufacture: 06/2015 Serial No.: 983 Location: NRW Operating hours: approx. 10,900 hrs Availability: short-term, by arrangement Standard equipment: - Central axle trailer chassis for 80 km/h - Brake system with ABS according to EC directive Dcjdpfjy Sam Uex Ak Ajp - 50 mm EC towing eye, bolt-on shoe - Tyres 285/65 R 22.5 - Permissible total weight 19,000 kg - Mercedes-Benz engine OM 460 LA, 375 kW at 2,000 rpm, emission standard Euro Mot III B - Load-dependent feed control incl. automatic scraper conveyor reversal - Fuel tank 600 liters - Complete radio remote control - Hydraulic drive - Hydraulic support legs - Separate drive for feed roller/scraper conveyor 'TwinDrive' - Painted in RAL 2011 deep orange Condition of the machine: The machine is in technically and visually good and ready-to-use condition. New diesel engine at 10,310 operating hours! Warranty: The machine is sold in the condition existing at the time of delivery. The seller assumes no liability for defects.

Condition: excellent (used), functionality: fully functional, Working width: 900mm Steel calibrating roller Combination unit with a rubber roller Motor power: 11kW Dcodezxp Npepfx Ak Asp Pneumatic shoe adjustment Pneumatic oscillation with a photocell Element thickness gauge Electric table adjustment Star/Delta start-up Power supply: 380V

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm Dcedpfx Akju Ngaue Aep swing diameter: 800 - 320 mm grinding depth: 380 mm dimensions of grinding wheel: Ø 65 x 25mm (Topfscheibe) mm feed:: 0,05 - 0,40 U/min / 8 step U/min total power requirement: ca. 1,1 kW weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Dcjdpe Aflwyjfx Ak Asp

Condition: good (used), - Used machine - Passage width: 1100 mm - Passage height: 3 - 160 mm - 1st unit: Contact roller - 2nd unit: Grinding shoe Dsdpfx Akoz Tflno Aecp - Grinding belts: 1120x1900 mm - Motor power: 15.0 kW - Feed rate: 5 - 25 m/min - LxWxH: 1910 x 1570 x 1920 mm - Weight: 2500 kg - Ex works

Condition: excellent (used), functionality: fully functional, Working width 650 mm, combination unit with calibration roller and shoe, two feed speeds, belt oscillation, electric table adjustment, material gauge Dcedpfxozxqapo Ak Asp

Condition: excellent (used), functionality: fully functional, two milling units two motors with a power of 1.5 kW pneumatic shooting device sanding unit pneumatically actuated pressure shoe maximum belt width: 80 mm motor power: 1.5 kW pneumatic oscillation Dsdpfxozz Nqrs Ak Ascp adjustment of units in two axes stepless feed speed adjustment power supply: 380 V

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm Dcodpfx Ake Af Uube Aep max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Total power 14 kW First calibrating unit with steel roller Second combination unit with rubber roller Working width 950 mm Two carpet feed speeds Electric table height adjustment Shoe with adjustable activation time Oscillation with photocells CE marking Year of manufacture 2007 Dedpfxjzx T Rdj Ak Aocp

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 320 - 800 mm grinding depth: 380 mm Dedpfxju Ngcij Ak Ascp total power requirement: ca. 1,1 kW feed:: 0,05 - 0,40 mm/U / 8 step U/min weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel *