Used Showroom Machine for sale (65,235)

Condition: used, Year of construction: 2013, Technical details: x-travel: 3.600 mm y-travel: 1.100 mm z-travel: 900 mm table surface area: 4.200 x 1.100 mm control: iTNC 530 HSCI HEIDENHAIN turning speeds: 20 - 10.000 1/min taper ISO: SK 50 rapid traverse: 40 m/min tool change unit: 120 Pos. spindle drive: 44 / 32 kW total power requirement: 77 kVA weight of the machine ca.: 31,5 t dimensions of the machine ca.: 7 x 3,5 x 3,2 m 5-axis-simultan universal machining-center, NC-swivelling milling-head (B-axis), rigid table with integrated NC-rotary table (left), dia. 1.050mm (max. table load 1.200kg), internal cooling device 40 bar, coolant 600l, paperfilter, chip conveyor, mode 4, el. handwheel, infrared touch probe TS 649, BLUM-Laser, prepared for 3D quickset (software), dividing wall, twin table machining, DMG netservice, mech. setting-up device for toolholders, oilmist suction, Djdpfj Ahywwox Ak Aecp flush gun, incl. zero-point-clamping system (as seen on Fotos) machine with energy-saving ballscrews (X, Y, Z) ! approx. 47.000 machine on hours, 13.700 spindle hours *

Condition: used, Year of construction: 1997, Used Machine Year of Manufacture: 1997 Features and Technical Specifications: - Fitting drilling head - Drilling unit with 3/4 spindles Dcjdpfjzk Nu Aox Ak Ajp - 2 clamping cylinders - Motor power: 0.8 kW - Power supply: 400/50 volts / Hz - Machine dimensions - Dimensions: 950 x 650 x 700 mm - Weight: 80 kg

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Dcodpfjzk N Dwsx Ak Aep Availability: available shortly Location: 63934 Röllbach

Condition: used, Year of construction: 2007, type of input current: three-phase, pressure: 8 bar, input voltage: 400 V, power: 12 kW (16.32 HP), No. 3288 4-head welding machine Urban AKS 6110/4-30/27 Used, year of construction 2007 (overhauled 2025), good condition, annual maintenance According to our customer / the previous owner, the machine is fully functional and can be inspected on site Horizontal 4-head welding machine for PVC window profiles Welding of 4 corners in one operation Version with right-hand stop Integrated outfeed conveyor for transfer to a corner cleaning machine Online interface AKS-SV for data transfer to the corner cleaning machine Working range Frame size X 420 - 2700 mm, Y 350 - 3000 mm Profile height 50 - 200 mm, profile width max. 150 mm Clamping height 200 mm, pneumatic clamping cylinders SH 200 Welding technology Weld bead limitation 0.2 mm with heated squeeze plates and stainless steel knives Squeeze gap adjustment WSK Heating plates 230 x 325 x 15 mm with Teflon holder and Teflon reel Temperature controller Urban UTR 320 Electronic pressure regulator Welding temperature, heating time, alignment pressure, joining pressure, joining time and clamping pressure individually adjustable Automatic profile stop with automatic release and adjustment of profile supports Valve manifold for special units Control and drives PC control Ferrocontrol (Windows) with industrial PC FIPC 5.9 Network-capable control CNC positioning via 3 AC servo axes (X, Y1, Y2) Connected loads Power supply 3/N/PE 230/400 V, 50/60 Hz Connected load 12 kW, 17 A Operating pressure max. 8 bar CE marking Installation dimensions approx. 6500 x 5000 x 1510 mm LWH Weight approx. 3500 kg Sale on behalf of customer, ex location near 37073 Göttingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Dedpfo Ahzp Sox Ak Aocp Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Year of manufacture: 1992 Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout Dcsdpozwn Egjfx Ak Aop - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Dedpfx Akshik Ezo Aecp Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: excellent (used), Year of construction: 2006, Control: Mazatrol Matrix Nexus Travel ranges X/Y/Z: 730 x 730 x 740 mm Spindle speed: 18,000 min-1 Tool magazine for 120 tools, SK 40 2-position pallet changer Pallet size: 500 x 500 mm Djdpj Ah Iz Nofx Ak Ajcp NC rotary table (4th axis) High-pressure coolant system through the spindle, 60 bar

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand accessory: the ‘Canon Staple Finisher-AG1’ finishing system Item for sale: Dedpfx Akez A Akfs Ajcp 1 x Canon Staple Finisher-AG1 Condition: This listing is for a second-hand accessory, which may show signs of wear (minor scratches or discolouration). The accessory has been tested to ensure it is in working order. Packaging and dispatch: You are welcome to view the item during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Plasma welding and soldering machine Dcjdpfjzwb R Nsx Ak Asp Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: used, Year of construction: 1995, 1995/2022 Koch/Aniro 14-strand Wire drawing machine - Upgraded in 2022 Dcsdpe Ah Ib Hsfx Ak Aop Produces: 1.0 mm diameter wire from 5.5 mm diameter wire rod - Low carbon. 3 strings, drum diameter 600 mm. 11 strings, drum diameter 340 mm. 3 x 11 kW motors. 12 x 17 kW motors. Wire production speed approx. 9 m/s Dimensions: Length: 22,000 x Width: 2,200 mm, Electric cabinets: Length: 8,000 x Width: 600 mm

Condition: used, ZOCCA RU 2000/3 UNIVERSAL CYLINDRICAL GRINDING MACHINE Dsdpfx Akj Ah H D Ne Ajcp • Manufacturer: Zocca (Como, Italy) • Model: RU 2000/3 (External / Hydraulic Universal Grinder) • Center Height: 180 mm • Maximum Grinding Diameter: 360 mm • Distance Between Centers: 2,000 mm • Drop down Internal Spindle • Steady rests • Coolant system • Spare wheels • Safety foot switch • Machine manual

Condition: good (used), Injector for plastering machine, gypsum plastering machine -Injector: for cleaning machine -Connections: see photos -Dimensions: 1420/640/H930 mm -Weight: 57 kg Dcsdpfo Ah Dwtox Ak Ajp

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Djdpfx Aj Ah E Siek Aecp Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: Serial No.57/19, total length: 9,370 mm, total width: 2,900 mm, total height: 3,890 mm, overall weight: 4,490 kg, input current: 83 A, input frequency: 60 Hz, type of input current: AC, input voltage: 400 V, power: 50 kW (67.98 HP), workpiece weight (max.): 300 kg, We offer this used Neptun MASTER WAVE HP 2800 glass washing machine, manufactured in 2019. Wave HP 2862-80 HD Neptun’s heavy-duty vertical glass washer is designed for intensive use, with corrosion-resistant components and extensive use of AISI 304 stainless steel. It handles glass up to 80 mm thick and 300 kg per linear metre, including float, acid-edged, coloured, printed and pyrolytic glass. Inlet conveyor The 3,200 mm inlet conveyor has motorised rubber rollers, bevel-gear transmission and stainless-steel shafts. Sensors detect glass thickness and dimensions for PLC control. Its independent drive pauses incoming sheets during thickness changes until the machine is clear and adjusted. A foot pedal allows heavy sheets to be loaded while the conveyor is stopped and the rest of the machine continues running. Prewashing and washing A separate 400 mm prewashing module isolates prewash water from the main wash. Without a closed-circuit tank and pump, water consumption is 1,200–2,400 l/h. Three washing circuits use three pairs of 160 mm brushes with 0.30 mm bristles. High-density front brushes have inverter-controlled speed. Separate overhead motors drive front and rear brushes. Each circuit includes a 900 µm inlet filter, a 300 or 150 µm cartridge filter, a stainless-steel immersion pump and a drain valve. The first two circuits have independently controlled heating up to 50°C. A separate rinsing circuit sprays both glass faces. Dcsdpfs Ah Hgzox Ak Aop Water management Water flows from the final circuit towards the first tank. Specified water limits are conductivity below 150 µS, salts below 80 mg/l, chlorides below 30 mg/l, hardness below 6°f and no iron. Demineralisation is required where these limits are not met or for insulating-glass production. Programmable preheating and automatic tank draining/refilling prepare the machine for the next shift. Rinse-tank conductivity control regulates demineralised-water input. Flowmeters display circuit flow and trigger cleaning alarms for filters or nozzles. Drying and energy saving The sound-insulated drying section uses one set of air knives, automatically positioned to suit glass thickness. Belt transport avoids roller contact after rinsing. SmartSpeed sets separate speeds for washing/drying and final trailing-edge drying. Stated fixed-speed performance applies to glass up to 10 mm without holes or notches; thicker glass or glass with holes or notches may require slower drying. Ecosave® automatically reduces drying airflow and energy demand when glass is absent. The source quotes savings of up to 41%, with a separate Ecosave Full example claiming 60% under the specified glass-size and spacing conditions. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation - Excellent price-performance ratio - Optional winding station / automated cushion roll production - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: Djde Ah Eyqopfx Ak Aecp - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: good (used), Year of construction: 1954, wire dia. . mm wire length . mm pulling capacity 7 t total power requirement . kW Dedpfx Akj Ah Id Ne Aecp weight of the machine ca. . t dimensions of the machine ca. . m

Condition: used, machine/vehicle number: 008744, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4 Dcjdsz Ig Ufjpfx Ak Asp

Condition: used, JONES SHIPMAN 1307 EIT CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1307 EIT CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS VARIABLE SPEED WORK HEAD INTERNAL SPINDLE. DOUBLE SWIVEL WHEEL HEAD. METRIC DIALS RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK Dcjdpjy Hi Epofx Ak Ajp PAPER FILTRATION SYSTEM REBUILT BY ANDMAR EXTENSIVE RAGE OF TOOLING AND ACCESSORIES HYDRAULIC PACK

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm Dedjy Nmg Ajpfx Ak Ajcp PLUS HYDRAULIC MOVEMENT DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Djdpezwwndofx Ak Aocp Type of CNC Table length 762 mm Table width 406 mm Max. part weight 340 kg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Spindle motor power 11 kW

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Dcjdsx Ad Nlopfx Ak Aep Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: like new (used), Year of construction: 2012, operating hours: 5,607 h, functionality: fully functional, 2012 LEADWELL MCV 1500i+ (4 Axis) VMC Category: Vertical Machining Centers (VMC) Reference No.: 400140 Capacity: 1520 X 1016 X 720 MM Year of Construction: 2012 Technical Specification: Djdpfx Akjx Ehibj Ascp SPINDLE Spindle Taper : CAT/BT 50 Spindle Speeds : 4000 RPM WORKING CAPACITY Table Size : 1550 x 1000 mm Travels (XYZ) : 1520 x 1016 x 720 mm Spindle Nose to Table (Min.- Max.) : 120 - 840 mm ATC Tool Change Capacity : 24 Tools ATC Type : ARM CNC Control : Fanuc Oi-MD Additional Details: 12" 4th Axis

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm Djdpfxjx Sr A Us Ak Ascp - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor

Condition: used, Year of construction: 2003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Machining Center - Vertical Manufacturer: MIKRON Model: VCE 1600 PRO Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Djdpfxo Ahrm Dj Ak Ajcp Technical specifications: X-axis: 1,600 mm Y-axis: 900 mm Z-axis: 900 mm Spindle speed: 10,000 rpm Number of tool stations: 30 Machine weight: approx. 18,500 kg Condition: Used Technical features & accessories: - 2 rear-mounted chip conveyors, integrated into the machine - Oil cooler - Coolant filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Year of construction: 2008, condition: used, Grinding machine Manufacturer: HS Maschinenbau Type: Year of manufacture: 2008 Technical data Grinding machine for brush handles and similar products (putty knives, trowels, etc.). Operating hours: approx. 50,100 h Note: Dedpfx Akj Ahnpbo Ajcp The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.