Used Sliding Panel Saw for sale (21,843)

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW Itedexpvk Iepfx Ag Sop - extraction port diameter: 100mm - table dimension: 115x625mm - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm Iedpfx Ageg Dgr Hj Setp prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Iedpowuz Irjfx Ag Setp Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Isdpfx Ajrubg Hjg Sstp

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, featuring 2-axis scorer, 3m table, and Control-Plus control system Sliding table length: 3000mm Saw blade tilt: 0 to 45° Speeds: 3000, 4000, 5000, and 6000 rpm with digital speed display Main motor: 5.5kW with automatic motor brake Control panel at eye level with Control-Plus system 4-axis CNC control Cutting to chain dimensions and grooving on the rip fence and crosscut fence Cut width correction on rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with result transfer to the corresponding axis Tool management Maximum saw blade diameter: 450mm Maximum cutting height: 150mm Cutting width up to 1040mm, electrically adjustable Tilt angle and height adjustment: motorized Crosscut fence rail up to approx. 3210mm, electrically adjustable, automatic coupling of the second stop flap for large cutting dimensions Rip fence can be folded down Extraction port: 120 + 80mm Sliding carriage lockable Additional mitre fence rail Includes 2 used saw blades and a scoring blade 2 riving knives 2-axis scoring unit, motorized adjustment while machine is running 2 safety guards 3 emergency stop switches Clip board on the control panel CE marking Isdoxw Ii Sopfx Ag Sstp Machine with signs of wear. No cuts in the sliding table. Original paint (special colour scheme), partially repainted. Machine has 18,985 operating hours. Previously in a furniture factory, evidently regularly serviced and well maintained. Condition as shown in original photos. A video of the machine in operation can be sent on request. Dimensions approx. 3150 x 3750 x 1900mm (LxWxH). Weight approx. 1400kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this seller".

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Cutting depth 80 mm Itsdpfx Agevymf Uj Sep Saw blade diameter 300 mm Motor 4 kW - 4420 rpm. Incl. middle workpiece support on 4 fields Incl. 2 length stops with manual scale Availability: short term Storage location: Röllbach

Year of construction: 2018, condition: ready for operation (used), Additional Equipment Main Cutting Disc Motor Power (kW): Max 23 kW Number of Pneumatic Clamps on Pusher: Max. 9 Patented Rotating Support Table This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information. Iedpfx Aoxwfkyog Sstp Application Types Sawing

Condition: used, Year of construction: 2003, Cutting range: 5300 x 2240 x 80 mm Motor: 5.5 kW (7.5 HP) Saw blade: 300 mm Vertical cutting distance: 1000 mm Feed speed: 10-25 m/min Four-sided edging Independent pre-scoring saw unit Storage location: Supplier Itodpfx Aexwwdxeg Sep

Condition: used, machine/vehicle number: 008089, Max. panel width: 1900 mm Max. panel length: 5300 mm Scoring Saw: 250 mm Iodpfx Agsw Idb Te Sstp

Condition: not inspected (used), Used machine Used vertical panel saw by Holz-Her, type 1210 Older model; suitable only for coarse cutting Technical data: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Maximum saw blade diameter 300 mm Motor power 4 kW Itsdpfx Agoxviuas Sop Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2006, cutting length (max.): 3,200 mm, saw blade diameter: 650 mm, cutting height (max.): 200 mm, cutting width (max.): 3,200 mm, saw drive: 35,000 W, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, compressed air connection: 6 bar, sheet thickness aluminum (max.): 200 mm, space requirement length: 6,855 mm, space requirement width: 6,280 mm, space requirement height: 2,400 mm, working height: 1,100 mm, Mayer AL 160 Panel beam saw for aluminum and non-ferrous metals with a maximum package height of 200 mm. Technical data: Year of manufacture: 2006 Cutting length: 3,200 mm Cutting width: 3,200 mm Maximum package height: 200 mm Maximum material clamp opening: 210 mm Saw motor power: 35 kW Saw blade diameter: 650 mm Saw unit forward speed: 0.2 - 60 m/min. Saw unit reverse speed: 60 m/min. Material pusher forward speed: 10 m/min. Material pusher reverse speed: 20 m/min. Itodpfjxx Anlex Ag Ssp Extraction connections: 1 x Ø 140 mm, 1x Ø 160 mm Pneumatic operating pressure: min. 5 bar, max. 6 bar Pneumatic compressed air requirement: 720 Nl/min. Working height: 1,100 mm Overall height: 2,400 mm Installation length: approx. 6,855 mm Installation width: approx. 6,280 mm Condition: The machine is largely functional and is currently in use in production.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Equipment and technical specifications: - Cutting length: 3400 mm - Cutting width: 1300 mm, CNC-controlled - Motor: 5.5 kW - Automatic brake - Digital display for cutting width - Digital display for tilting Iedpfxsxwz Ins Ag Sjtp - Digital speed display - Digital display for mitre fence - Scoring unit: electric H+S F45 - RAPIDO scoring system - Automatic guard control - Parallelogram guard device F45 - Table extension: 800 mm - CE version - Anodised version Availability: approx. mid-April 2026 Location: Hesse

Condition: used, Year of construction: 1985, machine/vehicle number: 85-9-196, This Altendorf F-90 sliding table saw is being auctioned in our industrial auction / machinery auction as part of the insolvency auction of Wietec Fenster GmbH – machining equipment, workshop furnishings, trailers – online. Itedpfjxu Tubex Ag Ssp

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Itsdpoxwhrgjfx Ag Ssp

Year of construction: 2011, condition: ready for operation (used), Additional Equipment Optionally available with a new Felder RL 200 extraction system from 2024. This PUTSCH SVP 950M panel saw was manufactured in 2011. It features a maximum cut length of 5300 mm, vertical cut up to 5200 mm, and a cut height of 2200 mm. The saw operates with a motor power of 7.5 hp and a blade diameter of 300 mm, rotating at 5000 rpm. Consider the opportunity to buy this PUTSCH SVP 950M panel saw. Contact us for more information about this machine. Itjdpfx Ajxulb Tog Sep Application Types Sawing (Wood)

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 Itedpfx Aoh Dwmlsg Sop TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: good (used), max blade diameter 400mm max cutting height 100mm blade adjustable up/down + angle spindle diameter 30mm Iodpfsttxb Ujx Ag Sjtp main motor 5,5kW undercutter

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: - Cutting length: 5,300 mm - Cutting height: vertical 2,150 mm, horizontal 2,100 mm - Maximum cutting depth: 60 mm Itjdpfexvnpcex Ag Ssp - Saw blade diameter: 250 mm; bore: 30 mm - Motor: 4 kW - Speed: 5,100 rpm - Material support with rollers - Fixed support elements for stable positioning of workpieces - Central support: robust support elements at working height, can be folded out individually by hand - Measurement readouts for: - Horizontal saw cuts via scale - Horizontal saw cuts via strip stop from 50–500 mm - Vertical saw cuts via stop from 0–1,300 mm - Compressed air connection for pneumatically retractable slatted frame (required air pressure: 6 bar) - Scoring system: achieved by double cut of the main saw blade. The plunge depth of the saw blade is limited by simply repositioning a stop, allowing the blade to score the workpiece along the feed direction. Availability: Approx. end of January 2026 Location: Hesse

Condition: like new (used), Year of construction: 2003, functionality: fully functional, STRIEBIG – Panel Saw – Model 4164 Used machine – fully refurbished Year: October 2003 Cutting capacity: Itodsxxvmnopfx Ag Sep Length: 3,100 mm Vertical cutting height: 1,640 mm Horizontal cutting height: 1,532 mm Cutting depth: 60 mm Technical specifications: Motor power: 3.9 kW (5.3 HP) Saw blade diameter: 250 mm Bore: 30 mm Blade speed: 5,250 rpm Electrical connection: 3 × 400 V / 50 Hz We have installed €4,500 worth of new spare parts to fully refurbish the machine.

Condition: ready for operation (used), Year of construction: 2011, cutting height (max.): 1,510 mm, cutting depth: 55 mm, type of input current: three-phase, input voltage: 400 V, saw blade bore: 30 mm, main saw diameter: 250 mm, rotational speed (min.): 5,100 rpm, We are selling our vertical panel saw from manufacturer Elcon, model DS 155, due to a new purchase. The machine features an extended cutting length of approximately 4 meters. It is still in operation at the moment, but a prompt handover is possible. We will assist you with loading and dismantling. Itjdpfoxxrt Rex Ag Sjp

Year of construction: 2006, condition: ready for operation (used), This SELCO EBT 108 was manufactured in 2006. A robust CNC Panel Saw with a cutting length of 3200 mm and height up to 80 mm. Features include a main saw motor power of 9-11 kW and feed speeds up to 100 m/min. Ideal for precise cutting of MDF, chipboard, plywood, and laminated panels. Weight around 6000-7000 kg. Contact us for further details regarding this machine. Application Types Itodpfx Ajxtq T Ejg Sep Sawing (Wood)

Condition: used, Year of construction: 2012, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,270 mm, cutting height (max.): 100 mm, saw blade diameter: 315 mm, main saw diameter: 315 mm, trimming length: 3,200 mm, type of input current: three-phase, input voltage: 400 V, - Year of manufacture: 2012 Iedpfx Agsxdyvds Setp TECHNICAL SPECIFICATIONS: - Max. saw blade diameter: 315 mm - Cutting length: 3200 mm - Max. cutting height: up to 100 mm - Angle cutting: 0-45 degrees - Saw blade speed: 4000 rpm - Main motor power: 5 kW - Scoring unit motor power: 0.9 kW - Max. parallel cut: 1270 mm - Weight: 800 kg

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Iodpfxoxuxg Nj Ag Sjtp Equipment and technical specifications: - Cutting length: 2800 mm - Cutting width: 1250 mm - Saw blade swivel range: 0° - 45° - Max. saw blade diameter: 350 mm - Saw blade speeds: 3000 / 4000 / 5000 / 6000 rpm - with scoring saw unit - with parallelogram guard - with extraction port 80 mm - with table extension 800 mm - Motor 5.5 kW - with brake motor Weight approx. 850 kg Availability: approx. end of January 2026 Location: Hesse

Condition: used, functionality: fully functional, product height (max.): 120 mm, product length (min.): 585 mm, product length (max.): 6,050 mm, product width (max.): 440 mm, - Made in Germany TECHNICAL SPECIFICATIONS: - Maximum cutting length: 6050 mm - Minimum cutting length: 585 mm - Cutting height: 120 mm - Maximum material width - Saw blade diameter: 400 mm - Number of cutting units: 4 Iedpfx Asxdxv Njg Sotp - Cutting unit power: 4x 3 kW - Feed motor power: 1.1 kW - Material feed via chains - Feed speed adjustable with gear motor

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Condition: completely overhauled and refurbished Features and technical data: - Cutting area 4,200 x 2,100 x 50 mm - CE mark - Rear full enclosure - Scoring unit - Complete with extraction hood and saw blade - Control panel on saw carriage - Reinforced 4 kW motor Itjdpfx Agowt E Uyj Ssp - With strip cutting device - Folding stops and aluminium central support - Retractable slatted frame for horizontal cuts Dimensions: approx. 5,250 x 2,700 x 1,350 mm Weight: approx. 750 kg Availability: short notice Location: Hesse