Panel saw Altendorf F 45

Altendorf F 45

Condition: used, Year of construction: 2001, sliding table length: 3000 mm cutting width at the fence: 1300 mm cutting width at the cross cut: 3200 mm cutting depth: 145 mm scoring unit: Ja height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch adjustment fence: elektrisch adjustment crosscut fence: manuell read out tilting: Digitalanzeige read out sawblade height: Digitalanzeige read out crosscut: digital Anzeige Ablänglineal: Scala sawblade diameter: 450mm speeds: 4 motorpower: 5,5kW suction connection: 80 und 120mm machine length: 3600mm machine width: 2200mm Hjlox Edlxehcdwwjfr weight: 1200 kg

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Hfslhcdjwrb U Tewwjr

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Hjlhcdox Dax Ejwwsfr Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: used, Year of construction: 2018, machine/vehicle number: Werksüberarbeitungsnummer: WÜA18031207013284, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, table length: 840 mm, main saw diameter: 450 mm, power: 7.5 kW (10.20 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0399 F45 Pro Drive Year of manufacture: 2018 Template holder Max. saw blade diameter: 450 mm Motor: 7.5 kW Vario DRW: 3000 mm Holhew Nii Socdwwjfr TPL: 840 mm WGA Digit-L PA 1300 mm CNC Front support roller Air cushion table

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Storage location: Nattheim Hfolhcsvvi Ttodwwer

Condition: new, Year of construction: 2022, Sawblade tiltable 46 ° Length of the rolling table 3400 mm cutting width 1300 mm Motor output 5,5 kW Hfjlhex Avq Ujcdwwjr Cutting height 150 mm Saw blade diameter 450 mm Speed stufenlos U/min. weight of the machine ca. 1300 kg

Condition: used, Year of construction: 1978, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 1978 - Documentation available: No - CE certificate present: No - Serial number: 78-11-11 - Spindle speed: - └ Max. spindle speed [rpm]: 4000 Hjlhcsx Arcmjdwwefr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW Hfslhcdovambcswwjr >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: new, Year of construction: 2025, The new F 45 is a masterpiece of technology and design. The comprehensively redesigned machine frame combines absolutely unprecedented torsion resistance with extremely low levels of vibration, while the smooth front and clear foot space on the floor enable you to operate closer to the machine and the workpiece. The famously smooth running sliding table, which has received a number of design tweaks, remains the undisputed benchmark for precision cutting and minimal maintenance. The crisp new industrial design underlines the distinctive quality of the Altendorf brand: It is an approach that brings together distinctive design and timeless aesthetics – recognised with the iF design award 2016. Altendorf’s new generation is unique in that we now have just the one model: the F 45. But this one model comes with a choice of three completely new control unit designs, each of which enables you to control up to four axes from the centrally positioned eye-level control panel. The only decision that remains for you to make is this: Which control unit shall it be? Hfelhcsd Hz Etsdwwjr Machine equipment: - F 45 ProDrive in basic specification - Max. diameter of the disc 450 mm - 5,5 kW (7.5 HP), three speeds (3/4/5,000 rpm) - Two-axis scorer unit for one-way tilt - Sliding table, table length 3200 mm - Crosscut-mitre fence, stops to 3200 mm - CNC rip fence, cutting width 1300 mm - Duplex 1350 mm

Condition: good (used), Altendorf F45 panel saw in good overall condition Year of manufacture: approx. 1990 Sliding table: 2800 mm Motor: 5.5 kW Includes tools Hfjlhcex Alcaodwwer Documentation available

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m Hfelhcdot Hmlqjwwsr roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: excellent (used), Year of construction: 1994, sliding table length 3200mm scoring unit hydraulic regulation of blade angle hydraulic regulation of blade up/down Holhcow Ad Udedwwefr digital display of blade angle electric regulation of scorer carriage moved on textolithe rails

Condition: excellent (used), Year of construction: 1986, Used, good condition Make: Altendorf Type F45 Year of manufacture: 1986 Machine No. 86-4-143 GS-tested Motor: 5.5 kW Carriage length: approx. 2500 mm Cutting width: approx. 800 mm Pivotable up to 45° Saw blade diameter: 450 mm Parallelogram guard Miter stop Extraction connection: D 80 and 120 mm Space required: approx. 2500 mm x 1600 mm x 1500 mm Weight: approx. 1000 kg Holewhgd Sjhcdwwjfr Storage location: 54634 Bitburg, Germany, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Helhcdotwz Tljwwofr incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: excellent (used), Year of construction: 2024, Sawblade tiltable 46 ° Length of the rolling table 3000 mm Hfelhcdjx Ak Hwowwor cutting width 13000 mm Motor output 7,5 kW Cutting height 204 mm Saw blade diameter 550 mm Speed 3000/4000/5000 U/min. weight of the machine ca. 1250 kg