Used Stack Cutter for sale (5,291)

Condition: good (used), overall weight: 350 kg, Manufacturer Bekuplast Color: Grey Material: Polypropylene External dimensions: approx. 600x400x400 mm (LxWxH) Internal dimensions: approx. 555x360x385 mm (LxWxH) Quantity: 100 pieces Bedpfx Afjvb Hvijxsll Height when folded: 85 mm Stack height: 75 mm Handles: Front side open / long side closed Weight: 3.41 kg per piece Base with ribbed honeycomb structure Water drainage holes on the base

Condition: used, overall weight: 4 kg, inner dimension width: 426 mm, inner dimension length: 608 mm, total width: 468 mm, total height: 300 mm, total length: 650 mm, Used stacking box Manufacturer: SSI Schäfer Type: Series 14/6-1 Design: Shell handle Bljdpfx Afewg E T Aexel Color: Yellow Material: Polypropylene External dimensions (LxWxH): approx. 650 x 468 x 300 mm Inner dimensions (LxW): approx. 608 x 426 mm Usable height when stacked: approx. 278 mm Stackable: Yes Weight per unit: approx. 4.300 kg

Condition: good (used), overall weight: 4 kg, inner dimension width: 360 mm, inner dimension length: 555 mm, inner dimension height: 385 mm, total width: 400 mm, total height: 400 mm, total length: 600 mm, The scope of delivery includes: Folding crate 400 gray - second-hand Manufacturer Bekuplast Color: Grey Material: Polypropylene External dimensions: approx. 600x400x400 mm (LxWxH) Internal dimensions: approx. 555x360x385 mm (LxWxH) Bljdsvb Aa Dspfx Afxsl Quantity: to choose from Height folded: 85 mm Stack height: 75 mm Handles: Front side open / long side closed Weight: 3.41 kg per piece Base with ribbed honeycomb structure Water drainage holes on the base

Condition: good (used), Year of construction: 2010, operating hours: 5,400 h, machine/vehicle number: 13668, Laska vacuum cutter with low running hours. Machine is in good condition and has previously been used in a UK sausage factory until they closed in 2019. Tote bin loader Emptier Newer style touchscreen controls - fully programmable Bjdew Rn Rdepfx Afxjll Can be seen running.

Condition: good (used), Approx. 4-500 units, SSI Schäfer, Euro container LTB 8320 - used: Price per unit, ex warehouse: €8.50 (net)! Manufacturer: SSI Schäfer Type: LTB 8320 Year of manufacture: unknown Volume: 135 liters Weight: 5.28 kg Temperature resistance: -20 to +100 degrees Dimensions: External dimensions: Length 800 mm Width 600 mm Height 320 mm Internal dimensions: Length 752 mm Width 552 mm Height 317 mm New price: approx. €80 Condition: good Available: immediately Bljdjzv Ippopfx Afxjl Location: Frankenberg/Saxony warehouse

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Bsdpjwdihrjfx Afxell Jungner Sweden Built in 1995 Accessories

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. It is suitable for a maximum squeegee length of 1300 mm. In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us. Bljdpfxozyc T Ro Afxol

Condition: used, Year of construction: 1973, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Format: 600 x 500 mm Min. Size: NULL Max. Size: Maximum sheet size: 600 x Net Weight: 8.200 kg Measurements: L: 3.320 W: 2.440 H: 2.13 Equipment: Krause autofeed die cutter Bsdpfovfx Ulox Afxell Max. Size: 60 x 50 cm (23 x 19 inch) Processable materials: Paper, heavy cardboard, corrugated board, plastics, and leather Maximum cutting pressure: Approx. 40???50 tons (engineered for high-precision heavy die cutting)

Condition: like new (used), Blockhouse profile cutter, with teeth on the back. Bljdpjzvzu Sjfx Afxjl

Condition: used, Adjustable cutters on a hydraulic sleeve for the production of log planks (tongue and groove). Current settings: Groove profile width: 58.45 mm Tongue profile width: 53.25 mm Bledpfxszvnbfj Afxjl Technical data: - Cutter: HW - Cutting circle (ø): ~ 160 mm - Bore: 50 mm - Material: Steel

Condition: good (used), Year of construction: 2008, Seydelmann K754 vacuum and cooking bowl cutter direct from closed pate factory. Bought new in 2008. We can demonstrate the machine running. Bedpfxjqgfams Afxsll

Year of construction: 2004, condition: used, Stacking platform for panel dividing saws Manufacturer: Holzma 2x Type: HAU A/B 25/8 Bodpfx Afezu Am Texoll 2x Type: HAU A/B 25/12 Year of manufacture: 2004

Year of construction: 2005, condition: used, - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Used destacking unit Manufacturer: Meinert Type: AM 33 - 3000 /1300 Systems Year of manufacture: 2005 Technical data - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Design - Infeed belt conveyor in front of the system (special version: pneumatically adjustable for collecting 2 parts on top of each other) Blsdpjzuz N Tofx Afxsl - Infeed belt conveyor in the paternoster - 2 paternoster walls – fixed side and motor-adjustable loose side - Synchronized stop adjustment – infeed and stacking positions AM 33: 2 stacking positions on one lifting device with powered roller conveyor - Personnel protection consisting of safety grilles and automatic sliding gates - Control cabinet according to VDE regulations - PC control in a separate PC cabinet Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Infeed and destacking Manufacturer: Wamhoff Infeed Manufacturer: Wamhoff Automatic destacking Manufacturer: Wamhoff Year of manufacture: 2008 Note: Bedezuz I Aopfx Afxell The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Bledpfxjzuz Hls Afxsl Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Bledezuz Hfspfx Afxjl Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data - Cutting width 2200 mm Bedpozuy Arjfx Afxjll - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm Bsdpfxjzuyywe Afxell - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1995, Multi-blade saw with infeed and stacking system Blsdpfx Aozuyydsfxel Manufacturer: Paul Type: K 34G / 1500 Year of manufacture: 1995 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), AFT Sandwich cutter Bedsfv Spnepfx Afxjll Serial: 135012 Stainless frame, automatically cuts sandwiches into halfs, ensures clean and centered cut on all types of sandwiches, belt width 150mm, overall length 2200, mobile, 3Ph

Year of construction: 2006, condition: used, NNP Traversing and rotating head food cutter stainless construction cut up to 290mm diameter product head can index on a turntable and travel back and forth through 5 linear cut discs Bledpfxsb Uai Se Afxel

Condition: good (used), Nowicki KN1-125 Bowl cutter Bledjnp Nc Ijpfx Afxol Stainless bowl cutter, 125l bowl, six blade assembly, variable speed, safety guarded lid, discharge arm, external control panel, 51Kw, 3Ph

Condition: excellent (used), Year of construction: 2008, Seydelmann K40 Bowl cutter 2008, Stainless bowl cutter, three blade assembly, variable speed, timer and temperature controls, 3Ph Blsdpfxeqakm Ie Afxel

Condition: like new (used), AFT Sandwich cutter Blodpfx Aod Nd I Nsfxjl Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Bedozva Spspfx Afxjll Technical data: - Blade: WP Z8 V8 - Flight circle (ø): 220 mm - Bore: 70 mm - Length: 14 mm - Material: steel