Used Stair Aid for sale (1,287)

Condition: good (used), The scope of delivery includes: 01x inlaid shelf grate, used Material color: hot-dip galvanized Total depth: 1.175 mm (supporting bar direction) clear support width: 1.097 mm Total width: 890 mm (cross bar direction) bearing bar dim.: 50/1.80 mm Frame height: 50 mm crossbar support: 40 mm Mesh size: 90 x 60 mm Weight: approx. 14,11 kg | pcs. Internal designation: GR-17 Remark: - The gratings may have damages, scratches, dents, welds. - The inserted shelf gratings are suitable in spite of the 40 mm crossbar support for a rack depth of upright depth of 1,200 mm. Ljdponh Rb Nofx Aglorr General information about the article: This item is offered for pickup only. A transport or shipment of this desired transport or shipment of this item is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Lrjdpfx Agsvnr Rroler Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Ljdpfovntb Sex Aglerr Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Ljdpfx Aovntmnoglorr Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Note: Ledpfjqwzvcox Aglerr The grating may show signs of damage, scratches, dents, or welded repairs. Scope of delivery includes: 01x inserted shelf grating, used Material colour: hot-dip galvanized Overall width: approx. 1,640 mm (cross bar direction) Overall depth: approx. 1,183 mm (bearing bar direction) Suitable for upright depth: 1,200 mm Clear support span: approx. 1,090 mm Beam support: approx. 50 mm Bearing bar dimensions: 30/1.8 mm Frame height: approx. 45 mm Mesh size: approx. 68 x 47 mm Weight | Piece: approx. 25.20 kg Internal designation: GR-45 Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Lsdpfxjzhhl Is Aglorr Two staircases can be mounted on top of each other. Half-turn staircase, left + right. A complete staircase can be stored on a Euro pallet.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw. Ljdpszgh Tvefx Aglsrr

Condition: used, functionality: fully functional, Hymer Aluminium Stairway Bridge. The stairway bridge from Hymer is practical and robust. It offers easy handling and ensures safe ascent and descent. The durable design guarantees longevity and reliability in every application. The stairway bridge is already packaged (see images) and ready for shipment. Packing dimensions: 250x100 cm Technical data: • Number of steps: 5 steps • Step width: 60 cm • Lower platform height: 116 cm • Platform length: 128 cm • Platform width: 65 cm • Max. load capacity: 150 kg per m³ • Material: aluminium Lredpfx Agsw Nhkbolsr • Total weight: approx. 95 kg • Packing dimensions: 250 x 100 cm

Condition: used, functionality: fully functional, Euroline Aluminium Stair Bridge The Hymer stair bridge stands out for its practicality and stability. It allows for straightforward use and ensures safe entry and exit. The robust design guarantees durability and reliability for every application. The stair bridge is already packaged (see pictures) and ready for shipping. Lsdpfx Aow Nhmceglerr Packaging dimensions: 300x140 cm Technical data: • Number of steps: 5 steps • Step dimensions: 80 x 24 cm • Height to lower landing: 131 cm • Platform length: 260 cm • Platform width: 80 cm • Maximum load capacity: 300 kg • Material: aluminium • Total weight: approx. 150 kg • Packaging dimensions: 300 x 140 cm

Condition: used, functionality: fully functional, Aluminium staircase bridge Lrjdpfx Agjw Nhn Holjr The staircase bridge stands out with its ease of operation and sturdy construction. It ensures straightforward use and safe access both up and down. The robust design guarantees durability and reliability with every application. The staircase bridge is already packed (see pictures) and ready for shipment. Packing dimensions: 270 x 130 cm Technical specifications: • Number of steps: 5 • Material: Aluminium • Total weight: approx. 140 kg • Packing dimensions: 270 x 130 cm

Condition: new, Year of construction: 2025, functionality: fully functional, Stair milling machine for mortising treads and risers into stringers and posts. The machine is equipped with a high-frequency milling motor. The machine is brand new. 400 V, 50 Hz. Lsdpfx Ajyxzacjglorr

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other versions available upon request Lrsdpfx Agjgu D Rmolor - 5 levels - Clamping depth 1050 mm - 1 pressure bar, 1500 mm long, 60 mm high, per level - 3 continuously adjustable pivoting counter supports, 400 mm long, per level - 2 pressure plates with handwheel, per level - 5 support arms, per level - all support arms with plastic pads (glue-resistant) - maximum clamping length 1600 mm - Powder-coated (glue-resistant): gray-white RAL 9002, moving parts light blue RAL 5012 - The presses are delivered ready for operation, complete with pressure regulating valve and standard air connection.

Condition: new, Year of construction: 2026, Universal solid wood boring machine with stepless turnable drilling unit for universal applications like e.g. staircases, entry doors, windows, winter gardens as well as useable as horizontal mortiser. Short introduction: • Universal application: staircases, frames, entry doors, windows, winter gardens as well as useable as horizontal mortiser, ... • Steppless turnable drilling unit: 65° - 0 - 65° • Drilling depth up to 200 mm (larger drilling depths optional) • Position height adjustment for 2 levels, pneumatically, 0 - 100 mm • Drilling in two levels through pneumatic raising and lowering of the drilling motor at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) • Pneumatic feed (option) Lsdpfx Ajdx R E Toglsrr • Mobil through castors (option) or with pallet trucks

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" Lrjdezn Drdopfx Agler * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.

Condition: used, Year of construction: 2024, Manufacturer : WAM MAP Model : WBHC Year : 2024 Type: Ploughshare mixer Material: stainless steel Condition: new Volume : 300 L Number of ploughshares: 6 Motor power: 9.2 kW Lrjdpezv Uzljfx Agljr Dimensions: 210 x 90 x 77 cm Control electrical cabinet with variable speed drive. Optional: chopper; original plugin connector available. Optional extras: original platform + stairs. Photos available on request.

Condition: used, mileage: 217,000 km, power: 140 kW (190.35 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 2nd battery (auxiliary battery) in cabin, 3-button remote control for central locking, overhead storage in driver's cab, Acoustic package, electrically folding exterior mirrors, exterior mirrors with blind spot assist, DAB tuner (digital radio reception), entry handle on rear right pillar, Driver assistance system: Attention Assist (drowsiness detection sensor), tachograph controls in front under overhead shelf, Suspension: Stabilization level I, fire extinguisher, vehicle without speed limiter system, rear lights partly LED, terminal strip for electrical connections (base of driver’s seat), instrument cluster with color display, chrome radiator grille, radiator grille frame in vehicle color, cable duct at rear portal, cable duct at side wall, side marker lights, metallic paint, engine PTO front with bracket for additional coolant compressor, MBUX multimedia system (10.25" touchscreen with navigation), Park Package with reversing camera, spare wheel with standard tires, spare wheel carrier under rear frame incl. jack, windshield wipers with rain sensor, LED High Performance headlights, sliding door cargo/passenger area left, rear mud flaps, Seats in driver's cab: double passenger seat, comfort sprung driver's seat, driver's seat base low, additional relay for auxiliary battery, rear door step, USB port center under dashboard (charging only), fleece battery 92 Ah, jack Additional features: 3rd brake light, storage compartment above windshield, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, Hill start assist, traction control (ASR), washer fluid level indicator, electrically adjustable & heated exterior mirrors (both sides), outside temperature display, automatic headlight activation, entry handle for sliding door at cargo partition, Electronic brake force distribution (EBV), Driver assistance system: Active Brake Assist, Side Wind Assist, Lane Keeping Assist, digital tachograph, rear door (opening angle 180 degrees), body/construction: standard high-roof panel van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71L, full partition wall in cargo area, steering column (mechanically adjustable), headlamp leveling system, Mercedes-Benz emergency call system, engine 3.0 L - 140 kW CDI CAT, wheelbase 3,665 mm, low emissions according to Euro 6 standard, sliding door cargo/passenger area right, driver's seatbelt system with warning device, seat upholstery: fabric, start/stop engine system, service interval display (Assyst), heat-insulating glazing (windshield with upper band filter), gross vehicle weight 3.5 t * Power steering * Partition wall * Central locking Air conditioning: Air conditioning Safety: ABS * ESP Lrodpfx Aezvwyqsglor Parking aid: Camera * Rear * Front Between wheel arches: 96 cm The vehicle is in TOP condition!!! Mercedes service history up to 160,000 km, 2 keys Financing available!

Condition: used, mileage: 96,500 km, power: 115 kW (156.36 HP), first registration: 09/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment on dashboard with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free, rear door (opening angle 260 / 270 degrees), automatic climate control, cargo partition wall with window, steering column (steering wheel) height and length adjustable, reversing aid with sensors, front and rear mud flaps, telematics system preparation (telematics box) Additional equipment: Traction control system (ASR), model: S-series, exhaust pipe lateral left, exterior mirrors electrically adjustable and heated, brake assist, interior roof light in cargo area, electronic brake-force distribution, driver assistance system: hill start assist (AAS), rear axle suspension: parabolic springs, front axle suspension: transverse leaf spring, tinted windscreen and side windows, 210 A alternator, speed limiter system 160 km/h, urea tank (AdBlue): 20 L, body/superstructure: high-roof van with extended rear overhang, fuel tank: 70 L, engine 2.3 L – 114 kW diesel, wheelbase 3520 mm, low-emission according to Euro 6d-TEMP standard, sliding door right side (cargo/passenger compartment), cab seats: dual passenger bench, maintenance indicator, gross vehicle weight 3.50 t Lrsdjzvw Hdepfx Agljr Vehicle is in good condition! 2 units available! Financing possible via Santander Bank

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 x rows of rod lashing rails, 14 x lashing eyes in the floor, walls lined with felt, 1 x interior light, pull-out galvanized stairs approx. 700 mm wide, rear, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lrjdpfjzwfahjx Agler

Condition: used, mileage: 65,785 km, power: 125 kW (169.95 HP), first registration: 11/2023, fuel type: diesel, overall weight: 3,025 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,023 mm, total height: 1,977 mm, loading space length: 2,602 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and omissions excepted! Internal number: 1007. PJ59452 ----EQUIPMENT * Trailer coupling, preparation kit - Electrical preparation kit for trailer coupling - Wiring harness, 13-pin socket and trailer module for retrofitting a trailer coupling * Rear window, heated, fixed - Interior mirror - Partition with window * Rear window wiper incl. windshield washer nozzle and automatic activation when reversing * Fuel tank 70 liters * Paint: Metallic * Technology Package 5 - Exterior mirrors with turn signals, electrically adjustable, heated and folding - Audio system 13, multifunctional display, Ford SYNC 4 incl. navigation. Blind Spot Information System incl. CTA, Rear Cross Traffic Alert, Pre-Collision Assist, camera and radar-based, Driver Fatigue Warning, Lane Keeping Assist incl. Lane Keeping Aid and Lane Change Assist, Traffic Sign Recognition, Wrong-Way Driving Warning, Park Distance Control front/rear, Adaptive Cruise Control, S&Go Intelligent Speed Limiter with Speed Display, Rearview Camera, Steering wheel, Sensico in leather look * Radio: Ford audio system with 13-inch multifunctional display and Ford SYNC 4 incl. navigation - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13-inch TFT multifunctional display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Socket: 12-volt socket in the cargo area (D-pillar) * Partition (metal) with window * 2-stage release for passenger compartment and cargo area (rear doors or rear swing door). Prevents locking of open doors * Anti-lock braking system with electronic brake-force distribution (EBD) * Airbag (passenger side) * Airbag driver side Lrjdpfx Agjxrxawelor * Exterior mirrors with integrated turn signals - electrically adjustable, heated and automatically folding - incl. power windows front, electric, with quick-up/down function for driver and passenger side * Exterior mirror housings in vehicle color * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. remaining range) and outside temperature display * Roof, flat * Roof console * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Electronic Stability Program (ESP) - Hill Start Assist - Emergency Brake Assist (EBA) - Traction Control (TCS) * Power windows front, electric - with quick-up/down function for driver and passenger * Parking brake, electronic * Ford Key Free system - incl. Ford Power Start function (keyless locking/unlocking and starting) * FordPass Connect - incl. live traffic information and 5G WLAN hotspot - Information about the current status or location of the vehicle and control of selected vehicle functions via smartphone with the FordPass app - Current traffic information in real time (in conjunction with the navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) - Further information on FordPass Connect can be found at/ * Windshield, heated * Transmission: 8-speed automatic * Grab handle, driver and passenger side * Glove box with lockable lid * Interior lighting front with delay function * Automatic climate control front - with recirculated air heating - with R-1234yf refrigerant * Headrests 3x * LED headlights - LED high beam - LED low beam - LED daytime running lights incl. integrated LED turn signals front - Cornering lights, static - High beam

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: Well-maintained (from a public company) Equipment: Base machine Campus software package Console table with 6 consoles Drilling unit 7979 with 14 spindles Milling unit 7831, 15 kW Tool changer, 12-position pickup system Ljdpszvz S Rjfx Aglerr Vacuum unit, 100 ccm Handheld control unit Safety device, light curtain C-axis Bushing aid Spot laser Air conditioning unit Location: North Rhine-Westphalia (NRW) Availability: Approximately November 2026

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Lrjdpoy D Rv Dsfx Aglsr Storage location: Customer

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,225 kg, color: grey, gearing type: automatic, number of seats: 9, total length: 5,450 mm, total width: 2,275 mm, total height: 1,984 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4629.NW26.SD34557 Errors and prior sale reserved! ---- SPECIAL EQUIPMENT * 3 USB ports for the 2nd row of seats * Trailer hitch, electrically swiveling * Windows, 2nd row: Vent windows in the side windows * Rear air conditioning * Fuel tank 70 l * Charging station, inductive, for mobile devices - according to Qi standard * Wheels: Alloy wheels 6.5 J x 17 in premium Carbonised Gray paint * Sliding door electric, right and left - with hands-free function - Ford Key Free system incl. Ford Power start function - LED headlights Lsdpfx Aoyhkh Hoglsrr * Technology Package 5: Exterior mirrors elect. adjustable, heated and foldable - Audio system with 13-inch multifunction display, Ford SYNC 4 incl. Navigation - Blind Spot Assist incl. CTA rear cross traffic alert - Pre-Collision Assist, camera and radar-based - Driver drowsiness alert - Lane Keeping Assist, lane keeping aid, lane change assistant, lane pilot - Traffic sign recognition - Wrong-way driver warning function - Parking pilot system front/rear - Adaptive cruise control incl. Stop&Go function - Intelligent speed limiter with speed limit display - Rearview camera - Steering wheel Sensico leather-look * Carpet floor mats, front FURTHER EQUIPMENT * 2 grab handles on driver and passenger side * 2-stage unlocking for passenger compartment and cargo area * ABS * Exterior mirror housings in vehicle color * Roof, flat * Roof console * Double-wing tailgate * Tachometer * Third brake light (with LEDs) * ESP - Hill Start Assist - Safety Brake Assist - Traction control * Power windows front, electric - with quick-up/down function for driver and passenger * Parking brake electronic * FordPass Connect - WLAN hotspot 5G modem (up to 5G/LTE, for up to 10 mobile devices) * Windshield, heated * Glove compartment with lockable lid * Rear window, heated - fixed * Rear window wiper * Interior lighting in the passenger compartment * Interior lighting front * Cargo area lighting (LED) * Center console, small * Driver drowsiness alert * Emergency call assistant eCall emergency call system * Parking pilot system front and rear * Particulate filter: Diesel particulate filter (DPF) with SCR catalyst * Radio accessories: 10 speakers * Tire repair kit * Tire pressure monitoring system * Gear shift on the steering column * Windshield wipers with rain sensor * Mud flaps front and rear * Fixed side windows, third row, right and left * Fixed side windows, second row, right and left * Power steering * Seat belts front * Seats: Rear seat package 3 - 2nd row with 3 individual seats - 3rd row with 3-seater bench * Seat package 47: Driver's seat, 4-way manually adjustable, with adjustable interior armrest - Front passenger double seat, fixed - Headrests driver and passenger - Seat heating for driver and passenger (outer seat) - Tray on the passenger seat (foldable) - Lumbar support for driver - Side airbags, r. and l. - Airbag, passenger side - Head/shoulder airbags, front r. and l. - Fabric upholstery Barlo Style in Black Onyx, seat back and side bolsters in fabric in Euro New Onyx * Start-stop system * Socket: 12-volt socket in cargo/passenger compartment * Bumpers front and rear painted in vehicle color * Carpet in the entire vehicle * USB port for the 2nd row of seats * Auxiliary heater * Lashing eyes 4 * Immobilizer * Thermal protection glazing, medium tint of the side windows from the B-pillar * Central locking with remote control - additionally with a second key, with remote control ... and more ---- 1st hand.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 44 kW (59.82 HP), pressing force: 500 t, stroke length: 300 mm, operating speed: 9 mm/s, throat depth: 400 mm, clearance between the columns: 5,050 mm, total length: 7,500 mm, total width: 4,200 mm, total height: 5,900 mm, overall weight: 67,000 kg, T1 and T1 bending aid for supporting arm EASY FORM angle measuring and correction system Oil tank, 650 liters Set of universal LVD tooling Lightly used under power in Germany New price: EUR 650,000 Max. bending length: 6100 mm Distance between columns: 5050 mm Max. pressing force: 500 tons Distance beam to table: 570 mm Lrjdjzuyyqepfx Agljr Beam stroke: 300 mm Table width: 200 mm Throat depth: 400 mm Approach speed: 100 mm/min Working speed: 9 mm/min Return speed: 80 mm/min Adjustment of X-axis back gauge: 1000 mm Number of controlled axes: 9 Control: TOUCH Crowning: Yes Hydraulic tool clamping: Yes Power: 44 kW Length: 7500 mm Width: 4200 mm Height: 5900 mm Weight: 67,000 kg

Condition: used, operating hours: 13,848 h, machine/vehicle number: SO139, Used Molding Machine MRT 3503 R for big container in HDPETechnical Specifications & Performance DataThe MRT 3503 R is a heavy-duty industrial forming system engineered for high-temperature plastic processing and container manufacturing (1.000/2.000/5.000L Tanks). The machine combines large-format capacity with controlled rotation on multiple axes to deliver consistent, repeatable forming quality.Model: MRT 3503 RSpherical diameter: 3500 mmMachine length: 14960 mmMachine width: 13026 mmMachine height: 5480 mmCarriages: 3Straight arm: 1Maximum load (straight arm): 2000 kgSecondary axis diameter (straight arm): 3250 mmOffset arm: AvailableMaximum load (offset arm): 1550 kgSecondary axis diameter (offset arm): 2900 mmPrimary axis revolutions: 0–8 rpmSecondary axis revolutions: 0–8 rpmBurner brand/model: WEISHAUPT WM-G10/2 A exec. ZM-LNDigital burner power (max): 630 kWBurner calibration power: 550 kWMaximum operating temperature: 300°CAlarm temperature: 340°CFuel type: Natural gas methaneAverage fuel consumption (continuous cycle):46 m³/hInstalled electrical power: 42 kWVoltage/Frequency: 400 V / 50 HzAverage electricity consumption (continuous cycle): 30–35 kW/hCompressed air: 2 lines, 6 bar max; 32000 Nl/hWater pressure: 2 barWater consumption (max): 4–6 l/minStructure finish: RAL 5002 / RAL 3020; Protections RAL 1023Arm surface finish: High-temperature silverAdvanced Automation & Control SystemsThe MRT 3503 R features precise rotational control with independently adjustable primary and secondary axes from 0 to 8 rpm for accurate thermal forming profiles. A digital WEISHAUPT burner package enables stable process temperatures up to 300°C, with an alarm setpoint at 340°C for enhanced protection. Electrical integration is standardized at 400 V, 50 Hz with 42 kW installed power for auxiliary systems. Operator safety is supported by guarded enclosures and compliance certification, while color-coded protections aid visual management. The controlled heating, rotation, and timing provide consistent part quality and predictable cycle times in industrial packaging applications.Production Line Integration CapabilitiesThis machine can operate as a standalone forming cell or be integrated into a broader production line with downstream trimming and quality checks. The generous envelope (3500 mm spherical diameter) and multiple carriages support high throughput configurations and flexible tooling strategies. I... Lrodpfx Ajziyy Heglor

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 100 mm, number of axes: 3, overall weight: 3,350 kg, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis FELDER PROFIT H 20 CNC Wood Machining Centre was manufactured in 2011. It features a working range of 3,060 mm in the X-axis and 1,260 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine includes 14 vertical drilling spindles and 4 horizontal drilling spindles in the X-direction. If you are looking to get high-quality wood machining capabilities, consider the FELDER PROFIT H 20 machine we have for sale. Contact us for further details. • Number of Milling Spindles: 1 • Main Motor: 9 kW • Torque Support: Included • Tool Clamping System: HSK-F63 • Tool Changer Positions: 8 • Linear Changer: Included • Vertical Drilling Spindles: 14 Lrjdpfx Agozvca Aoler • Horizontal Drilling Spindles X: 4 • Horizontal Drilling Spindles Y: 2 • Grooving Saw: In X-direction • Positioning Aid: Included • Crosshair Laser: Included • Vacuum Pump: Included • Number of Vacuum Pumps: 1 • Vacuum Pump Capacity: 90 m³/h • Safety Device: Safety mat (Trittmatte) • Tool Change Helper Device: Included • Workpiece Support Aids: Included • Pendulum Machining: Included • Control Unit: TPA ALBATROS • Software: TPA ALBATROS 2 • Total Connected Load: 15 kW