Used Stair Thrower for sale (224)

Condition: good (used), Year of construction: 2013, Cabinplant MHW 40-24 Multihead Weigher and Cabinplant Depositor/Distributor Machine functions: - Product is fed to infeed system, consisting of an elevator; - The elevator is controlled by the infeed sensor of the multihead weigher; - The multihead weighing machine discharges weighed out portions to Distributor / Depositor; - Distributor / Depositor distributes portions, orientates the product and dumps finished portions into a thermoforming machine or traysealer; This line consist of the following equipment:  - SS Stair; - Infeed conveyor belt; - SS Platform; - Cabinplant MHW 40-24 Multihead Weigher; - Cabinplant Depositor / Distributor; Cabinplant MHW 40-24 Multihead Weigher Manufacturer: Cabinplant Model: MHW 40-24 Year: 2013 Capacity: 150-500 gram Weighings/min.: Up to 120 Pan Size: 4 liter Number of pans: 24 Machine Dimensions LxWxH: 2.200x2.125x2.500 mm Machine Weight: 1.100 kg. Multihead Weigher is fully checked and serviced by Cabinplant Cabinplant Depositor / Distributor Manufacturer: Cabinplant Model: Sausage Depositor Year: 2014 Ledpfx Aewyu Trokqsru Capacity: 150-500 gram Weighings/min.: Up to 120 Filling Capacity: 2x5 movable pitch

Condition: used, Steel stairs, external stairs, machine stairs, machine ascent, extension stairs -Machine stairs: stable design, as machine access -Material: VA Ledpfx Aoiay Hdekqoru -Step height: approx. 310 mm -Height: upper step approx. 1680 mm -Transportation dimensions.: 1770/535/H190 mm -Weight: 29 kg

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Lrjdpfx Aevntb Sokqeu Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 4,250 mm, travel distance Y-axis: 2,280 mm, travel distance Z-axis: 150 mm, overall weight: 6,300 kg, spindle motor power: 18,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis SCM Accord 20 CNC router was manufactured in 2010. It features a working area with dimensions of 4250 mm in the X-axis and 2280 mm in the Y-axis, making it suitable for nesting production and wood processing. The machine includes a powerful electrospindle with a speed range of 600 to 24,000 rpm and a side tool magazine with 10 positions. If you are looking to get high-quality milling capabilities, consider the SCM Accord 20 CNC router we have for sale. Contact us for further details. • Typical applications: nesting production; windows and doors manufacturing; stair components production • Table size (L x W): 4200 x 2300 mm • Controlled axes: 3 (X, Y, Z) • Axis drives: Brushless motors • Rapid traverse: X 75 m/min; Y 75 m/min; Z 15 m/min • Lubrication: Automatic central lubrication system • Work table: Nesting table; large-format multifunctional aluminum matrix; pressed aluminum construction mounted directly to the base; designed for vacuum clamping of large panels • Main spindle: 1 electrospindle, HSK F63 tool holder; 600–24,000 rpm; 11 kW inverter; up to approx. 18 kW in working range (12,000–18,000 rpm); CW/CCW rotation; air cooling with fan; pneumatic tool clamping • Tool changer: Side tool magazine TR-10; 10 positions; 130 mm spacing; max 8 kg per position; automatic tool change • Workpiece clamping: Vacuum (nesting table); 2 vacuum pumps, 250 m³/h each • CNC control: SCM PC control • Software: Xilog Maestro; Xilog Plus; graphic programming editor; DXF import; subprogram and macro management Lrodpfxjzug Hwo Akqeu • Electrical: 400 V; 50/60 Hz • Construction: Heavy welded gantry; high-rigidity industrial frame; aluminum matrix table mounted directly to the base • Safety: Fixed safety fencing on two sides; CE marking • History/condition: One owner since new; used continuously in one company; regularly serviced; technical condition very good Additional equipment • Automatic dust extraction hood

Condition: new, overall weight: 1,300 kg, empty load weight: 1,100 kg, maximum load weight: 200 kg, loading space length: 3,130 mm, loading space width: 2,167 mm, loading space height: 2,120 mm, tire size: 165r13c, Car trailer as a construction trailer for 4 people with toilet and storage. An insulated *team trailer* is suitable for all seasons. With a sandwich construction in 50 mm and 60 mm insulated floor, it can withstand heat and cold. In winter, the built-in heating provides support. To ensure that the replacement trailer is as self-sufficient as possible, it has a small built-in WC with chemical toilet. Lrjdpfjqwi E Iex Akqsu The recreation trailer can be used on any construction site. It can easily be towed to the construction site with a car as a *car trailer* and can also be used as a *burro trailer*. The standard equipment of the construction trailer includes an entrance door with personal lock, stairs can be hooked in, 50mm Snadwich structure outside silver inside white, ISO floor in 60mm, PVC aud floor, chemical toilet in a small toilet room with washbasin, storage room with outside door and shelf, refrigerator, coffee machine, window with safety cover, 230V fuse box with RCD, sockets, switch and interior light, table and chairs for 4, shelf, coat hooks, four sturdy crank supports, power socket for 230V, connection cable, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet with drain, other sizes for up to 16 people, 100 km/h shock absorber and trailer lock.

Condition: good (used), Filtration Plant, make Seitz Orion, 100 x 100, for 180 hl/h, in 2002 overhauled, consisting of: - Kieselguhr-frame filter, with 29 kieselguhr frames in s/s, outside lying raising pipes, sight glass armatures with pressure manometer, with kieselguhr discharge tub with screw in s/s, with kieselguhr dosage unit Lrsdpjrai N Aofx Akqeu - Sheet filter with 150 stainless steel plates, outside lying raising pipes, sight glass armatures with pressure manometer - operating platform between both Filter, stairs at DE-Filter - Control cabinet

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, compressed air connection: 6 bar, overall weight: 3,000 kg, total length: 12,600 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ACME CNC Tube and Profile Laser Cutting Machine 6025D Precision, efficiency, and cost-effectiveness for modern tube processing The ACME 6025D is the ideal solution for companies looking to invest economically in professional tube and profile processing using laser technology. The machine combines precise cutting quality, robust industrial technology, and an attractive purchase price into a compelling overall package. Lsdpfszb Iriex Akqjru Whether for steel construction, metalworking, mechanical engineering, or contract manufacturing – the ACME 6025D enables fast, flexible, and cost-effective production of tubes and profiles with a wide variety of geometries. Even small batch sizes can be produced economically, ensuring maximum flexibility in day-to-day operations. Thanks to high-quality components from well-known manufacturers, a stable machine design, and intuitive controls, you benefit from high process reliability, low operating costs, and quick training for your employees. German-speaking service and modern online support solutions ensure high machine availability and rapid assistance when needed. Your advantages at a glance: ✔ Attractive price-performance ratio ✔ Ideal entry-level solution for small and medium-sized enterprises ✔ Precise processing of tubes and profiles ✔ Cost-effective production even with small quantities ✔ Significant reduction in manufacturing times and rework ✔ Easy operation and short training time ✔ Robust machine design for continuous industrial use ✔ High-quality components from leading manufacturers ✔ German-speaking service and fast online support ✔ High process reliability and reliable operation Flexible equipment options: The ACME 6025D can be individually adapted to your manufacturing requirements: Automatic loading system for higher productivity 45° laser cutting head for weld preparation and complex geometries Unloading systems up to 6 meters in length Laser powers of 3 kW, 6 kW, or 12 kW Various automation options for maximum efficiency Typical applications: Steel and metal construction Mechanical engineering Hall and plant construction Guardrail and stair construction Furniture and profile manufacturing Contract manufacturing Vehicle and commercial vehicle construction Conclusion: The ACME 6025D offers the ideal entry point into professional tube and profile processing using laser technology. It combines high cutting quality, economical production, and reliable technology in a machine specifically tailored to the requirements of small and medium-sized enterprises. ACME 6025D – Invest economically. Manufacture precisely. Produce for the future.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Lsdpfx Aovnr Rrjkqeru Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, overall weight: 1,300 kg, empty load weight: 1,140 kg, maximum load weight: 160 kg, loading space length: 4,130 mm, loading space width: 2,170 mm, loading space height: 2,120 mm, tire size: 165R13C, Car trailer as a construction trailer for 8 people with toilet and storage room. The insulated recreation trailer is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. A heater provides support in very cold weather. The use of a crew trailer is possible on almost any construction site. As a normal car trailer, it can be driven to the construction site by a simple car. These vehicles are also operated as Burö trailers. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, toilet room with chemical toilet and sink, storage room with shelf, stairs and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, refrigerator, coffee machine, connection cable, 230V fuse box with FI, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet with drainage via a sewer, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device. Lodorx Sn Tjpfx Akqsru

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 21,000 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 07/1995, loading space length: 13,700 mm, loading space width: 2,500 mm, suspension: air, tire size: 285.70 r 19.5, color: black, Year of construction: 1995, Equipment: ABS, tail-lift, sem racing set-up zorzi gooseneck, 2-axle pneumatic chassis, insulated load-bearing set-up with 10 q.li dhollandia racing rear side, double-level side storage, rounded head, internal part with workshop and 2-vehicle shelter with upper floor and aisles, living area with beds and sofas and bathroom on the neck, complete side awning included + removable mirrored walls, side access door with stairs and rear door, INTERDRIVE SRL-PARMA DEALER Lsdpfx Akov T Ugaeqoru

Condition: like new (used), 4,000 m² Nedcon storage mezzanine Column grid: 800 cm x 600 cm! Used, top condition, like new, see pictures. Height to top edge of the mezzanine: 370 cm Load capacity: 500 kg/m² Various flooring options available. Sufficient number of lifting platforms, stairs, railings, and accessories available. CAD planning and assembly possible. Partial sale possible. Negotiable price: upon request! Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking Ledpfxjhzxags Akqsru from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel structure mezzanines immediately available • Weekly 30-50 semi-trailer truckloads of goods for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly, and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY/BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF FOCUS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a complete, all-inclusive package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service, provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and complete clearance. Whether you found us through our heavy-duty racking or are looking for heavy-duty racking, galvanized / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 1,500 m² Nedcon storage platform Column grid: 800 cm x 600 cm! Used, in top condition, like new, see pictures. Platform top edge height: 370 cm. Load capacity: 500 kg/m². Various flooring options available. Sufficient number of goods lifts, stairs, railings, and accessories available. CAD planning and installation possible. Partial sale possible. Negotiable price: upon request! Goods are in stock. Transport and installation possible upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top used and new storage technology & heavy-duty racking Description: Are you looking for high-quality storage racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available Ljdpohzxbpofx Akqoru • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and installation. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round package: 1. Lump sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Carrying out auctions on commission. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling, and complete clearance. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Year of construction: 2005, condition: excellent (used), The designation TSHK160 refers to a rapid-heating mixer with a gross volume of 160 liters, while KGU400 describes a large-volume, universal cooling mixer with a gross volume of 400 liters. Both units are optimally matched to each other and enable a continuous, reproducible production process. - In ATEX design / explosion-proof - Bevel helical gear motor: 11 kW, n1 = 1300 rpm n2 = 104 rpm Motor IM V1 - Frequency controlled: 45kW 300/1500 rpm - Product-contacting parts: stainless steel 1.4541 - Hopper diameter: 300/200 x 350 Ljdpfx Akoiup H Toqsru Cooling mixer KGU400: - Capacity of the vessel KGU400: 391 liters - Capacity of the jacket KGU400: 45 liters - Min./Max. temperature TS. vessel and jacket KGU400: 5/95 °C - Min./Max. pressure PS. jacket KGU400: 0 / 0.5 bar - Test pressure PT jacket KGU400: 0.72 bar - Motor power: 11 kW High-speed heating mixer TSHK160: - Capacity of the vessel TSHK160: 210 liters - Capacity of the jacket TSHK160: 30 liters - Min./Max. temperature TS. vessel and jacket TSHK160: 0/158 °C - Min./Max. pressure PS. jacket TSHK160: 0/6 bar - Test pressure PT jacket TSHK160: 9.3 bar - Motor power: 45 kW - Working volume: 168 liters Accessories: 1. Platform with stairs MSH 80 2.Temperature control unit 30 kW 3. Hopper 4. Control panel 5. Control cabinet 6. Dust filter DN 200/ 100 7.Dust filter DN 150/ 100 8.Technical doc. Message: It was used in a technical plant for wood chip and melamine resin additives.

Condition: new, empty load weight: 880 kg, maximum load weight: 120 kg, overall weight: 1,000 kg, loading space length: 2,550 mm, loading space width: 1,770 mm, loading space height: 2,100 mm, tire size: 155R13C, Small toilet trailer with aesthetic furnishings. A toilet trailer is often essential for a small party or other outdoor event. We have set ourselves the task of helping here and offering an inexpensive car trailer with toilets. Nevertheless, the toilet trailer should also be well equipped and have a visually appealing interior. The car trailer has two cabins, one for women and one for men. The interior lighting, heating and instantaneous water heater are operated via the power connection. Wall-mounted toilets and concealed pipes create a pleasant ambience. Ljdporxu Hljfx Akqsru There is a fresh water supply and the gray water disposal runs via the sewer. The standard equipment of the toilet trailer in the ladies' area consists of an entrance door with personal lock, attachable stairs, heating, toilet with built-in cistern, toilet paper holder, drain for internal cleaning, PVC on floor, washbasin with vanity unit and instantaneous water heater, mirror, LED lighting, roof vent with mosquito net and blackout blind, light switch, socket and coat hooks. The men's area has the same facilities but also has a urinal. The basic equipment of the box trailer with toilet facilities includes a 50mm insulated sandwich body in silver on the outside, white on the inside, insulated floor, supply flap on the left for the technical equipment, power socket for 230V, distribution box with FI, fresh water access, outlet for drain pipe, four supports, stable frame and a V-drawbar. Further technical details can be found below. We offer 100km/h shock absorbers, anti-theft devices and drawbar boxes as accessories for our toilet vehicles.

Condition: new, maximum load weight: 30,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Knapen 3-axle SANH sliding floor trailer with electric roll cover, available from stock! * BPW 9-ton ECO Air HD rigid axle with disc brakes 430, 10-bolt, ET-120 * TireCheck tire pressure monitoring system * Smart Board * A-axis lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF * Gearbox-supported winch with push compensation, pivoting mud flaps * Plastic toolbox 1000x500x500mm * Water tank 28 L with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder * CARGOFLOOR CF-500 SL-C system, electric operation * Ribbed aluminum floor boards, 10 mm, 21 boards * Wear plates on the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear, under the floor * Platform on the front wall with ladder and safety switch to interrupt the power supply to the electric roll cover * Moving bulkhead * Rear doors with external locking bars * One locking bar per rear door * "A" sign (vertical hinge line) on the left rear door * Electric roll cover POWERSHEET, with remote control * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the welt on the left side wall, including fixed roll-fix operation at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Superstructure RAL 7011 IRON GRAY * Chassis galvanized, not painted Lodpfjz Iuw Ujx Akqoru * A-frame painted in RAL 7011 IRON GRAY

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK MM3166P 400V Drum Roller Sander is an advanced through-feed sanding machine designed for precise sanding of solid wood, MDF boards, veneer, and other woodworking materials. Equipped with two sanding drums and a 635 mm working width, this model is an excellent solution for serial production and facilities requiring high-quality surface finishing. Main advantages of the machine Two sanding drums with a diameter of 150 mm ensure uniform sanding without the risk of burns or scratches. Conveyor belt system provides smooth transport of the workpiece and stable guidance under the sanding unit. Adjustable feed speed from 1.8–7.3 m/min allows the operator to adapt the working speed to the type of processed material. Dust extraction system with two Ø100 mm ports ensures efficient removal of chips and dust, improving working comfort and extending the service life of components. Solid industrial construction weighing 220 kg provides excellent stability even during intensive operation. Construction and technology The CORMAK MM3166P has been designed with stability, precision, and durability in mind. The main steel frame provides resistance to vibration and deformation. The 2.2 kW main motor drives the sanding rollers at 1800 rpm, enabling efficient removal of excess material, even when processing hard wood species. The 120 W feed motor works together with the adjustable speed control system, allowing the operator to precisely control the sanding process. The large belt width of 635 mm makes it possible to process wide components in a single pass, reducing operating time. Precision and working efficiency The machine provides accurate control of the workpiece thickness in the range of 7 to 130 mm. The sanding belt speed of 14 m/s ensures a high-quality surface finish without overheating or burning the material. The roller diameter and working roller length (635 mm) provide even contact pressure and a consistent final sanding effect. Applications The CORMAK MM3166P drum roller sander is widely used in: woodworking plants producing stairs, doors, and furniture fronts, factories manufacturing wooden components and panel materials, workshops specializing in wood and veneer restoration, solid wood and veneered furniture production facilities, production of large-area components where repeatability and sanding quality are essential. Standard equipment Two sanding rollers Ø150 mm Conveyor belt with a width of 635 mm Main motor 2.2 kW Feed motor 120 W Dust extraction system with Ø100 mm ports Adjustable table height control Optional equipment Sanding belts with different grit sizes Dust and chip extraction system Mobile base Technical specifications Parameter Value Belt length 800 mm Belt width 635 mm Radius [R] 120 Maximum material thickness 130 mm Main motor power 2.2 kW Voltage 400 V Frequency 50 Hz Speed 1800 rpm Feed motor power 120 W Feed speed 1.8–7.3 m/min Dust extraction port diameter 100 mm Weight (net/gross) 220 / 260 kg Machine height 1113 mm Machine width (side view) 1100 mm Machine width (top view) 1060 mm Roller length 635 mm Lrodpoxfhh Djfx Akqju

Condition: new, Year of construction: 2026, overall weight: 1,900 kg, Big Bag unloading station complete with electric lifting hoist, discharge hopper, structural steel support frame, service platform with access stairs, and perimeter safety guards. Suitable for handling and unloading various bulk materials, including plastic granules, plastic flakes, flour, powders, and similar products. Lodpfjz Hlgkex Akqoru

Condition: like new (used), Year of construction: 2017, Prices from location dismantled, packed and loaded: Partial quantities can be purchased! We reserve the right to a minimum purchase! Manufacturer: Dexion Type: Hi280 Year of manufacture: 2017 Dimensions of shelves: 400x1,300 mm Height of shelves: approx. 4 cm Load per shelf: 80 kg/shelf Number of shelves: 15,400 pieces (some of which we have already sold) Number of frames: 1,653 pieces (some of which we have already sold) Condition: very good Available: immediately Location: Hungary/Budapest as a shelf platform: Floor area: approx. 2086 m2 Ljdsm Dr Uvjpfx Akqoru Pedestrian level: 2,500 mm Stairs: 6 pieces Folding door (automatic): 6 pieces Platform load: 500 kg/m2 Rear wall grid: 800 m2 Grid corridor: 1300 m2 Plan of the stage: upon request

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control Ljdpfjv Rpx Sex Akqsru • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: used, functionality: fully functional, Infeed: 1,000 x 350 mm, max. workpiece size: 320 x 320 mm, 45 kW electric motor 4-stage vibrating feeder HERWEG, approx. 800 x 4,000 mm, 2 x 4 kW drive with infeed and outfeed hoppers semi-mobile steel structure with platform, railings, and access stairs. Ljdpfxswb Dfgs Akqoru

Condition: new, Year of construction: 2026, functionality: not functional, input voltage: 420 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,300 mm, travel distance Y-axis: 6,680 mm, number of axes: 9, number of slots in tool magazine: 15, total height: 4,100 mm, total length: 7,920 mm, total width: 9,000 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, WatMachinery NHSB 3517 5-AXIS is a fully automated stone-processing production system engineered as a self-contained manufacturing cell. It integrates loading, multi-technology cutting, automatic part transfer, contouring, and finishing into one controlled process chain. By automating workpiece transport and positioning and executing machining operations in sequence, the NHSB 3517 increases throughput, improves repeatability, and reduces variability associated with manual handling and operator-dependent setups—delivering consistent quality shift after shift. Built on a compact platform that combines a 5-axis sawjet and a 5-axis CNC contouring center, the machine supports diamond blade cutting for high-productivity straight and profile cuts, an independent 5-axis waterjet for internal geometries and tight radii, and hybrid strategies that use both technologies for optimized edge quality and process stability. The production cycle begins with ergonomic slab loading via a tilting table, followed by material alignment including vein-oriented positioning for visual matching. Primary cutting and separation are performed with automatic selection of blade, waterjet, or combined cutting. Parts are then transferred through an automated handling sequence using a vacuum manipulator system with eight vacuum cups (lifting capacity up to 500 kg / 1,100 lbs), enabling safe and stable slab and workpiece manipulation. A dedicated finishing workflow completes the process with automatic positioning on suction-cup fixtures, followed by unloading without manual intervention. The 5-axis head assembly is configured for multi-operation processing and includes a diamond cutting spindle, an independent 5-axis waterjet head, and multi-head edge-finishing units for efficient flat-edge polishing, supported by vacuum handling plates for secure, repeatable part manipulation. An integrated slab washing apparatus cleans the surface before vacuum operations to improve grip reliability and positioning stability. The machine can be supplied with an on-board camera (accuracy ±5 mm) to capture slab images for software-based nesting and defect avoidance, and probing systems such as a laser probe and stone perimeter probing to enhance dimensional accuracy and alignment. Lrsdpfx Akeylkf Tsqeu The industrial CNC controller features an operator-friendly HMI, supports DXF import and G-code execution, and also provides a manual mode for quick operations and simple cuts. Designed for manufacturers producing countertops, bathroom elements, stairs, and architectural stone components, the NHSB 3517 5-AXIS delivers higher automation, reduced manual labor dependency, and measurable gains in productivity and process consistency.

Condition: good (used), 1200 m² steel platform Used, good condition, see pictures. Column grid approx. 10x6m Load per m² 800 kg Stairs, railings, transfer station, lift and much more available! Negotiable price: € Price on request! Partial sale and CAD planning possible. All plans and structural calculations available. Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by appointment. Further information on request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lredpfjt Ivwxjx Akqou Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse platforms & steel platforms immediately available • 30–50 articulated lorries of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete handover. Whether you came across us because of heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, mileage: 10 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, German new vehicle: * Not registered * German registration documents * Electrically adjustable/heated exterior mirrors Lrodpsfq I Uvofx Akqsu * Radio with Bluetooth * Multifunction steering wheel * Electric windows * Roof spoiler including side spoilers * Rearview camera including 7" monitor Body: * Internal dimensions approx. L x W x H = 410 x 210 x 230 cm. * Loading height at the doors approx. 10 cm lower than the cargo area height * Outer walls 25 mm. * Roof 25 mm. * Double-wing door at the rear * Floor 16 mm. Plywood * Folding stairs, extendable with 5 steps Option: * Side door * Tail lift Load securing also available from us: * Tension and lashing straps * Blocking beams * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing possible We manufacture bodies of any size for any chassis. Sheet metal, GRP sandwich, aluminum. Visit us at: Bodies - Complete vehicles - Trailers - Consulting - Financing Errors and prior sale excepted, no liability for printing and typing errors.

Condition: like new (used), Unused stair treads, 900mm x 370mm. Price per piece, minimum purchase 10 pieces. Lrjdpfx Akoy I Uz Esqsu

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Precision and performance Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, knife setting jig, mortising attachment. Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Lredpfsyy Nl Nex Akqsu Weight: 360 kg