Used Stampings for sale (449)

Condition: new, Year of construction: 2024, This machine is designed for top or side labelling on the flat containers. The LT-120 comes with 150 mm wide belt conveyor and is ideal for manufacturers which are packing the food, cosmetic, personal care, nutraceutical, electronic. Features: * Stepping Motor for fast and accurate labeling performance; * Controlled by Microprocessor, LED display; * Labels Counting feature / Production Run Counter; * Label sensor for Paper or Opaque labels; * Main structure of machine is made by anodize aluminium that CNC processing; * Height and angle are adjustable; * In Line Application or Independent Operation; * Modular design for easy maintenance / Quick and easy Changeover; * Heavy Duty Construction; * Capacity: up to 120 containers per minute. Hodeg Nttvjpfx Agzjg Options: * Inkjet printer; * Transparent Label Sensor; * Hot stamping coding machine; * Angled-Label Module; * Barcode Printer; * Passive Top pressing Roll; * Auto-Feeding Machine; * Conveyor speed adjustment possibilities.

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,250 kg, Hot Foil Stamping Tiegel / Tiegel Heidelberg GTP Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Online-Video-Inspection by FaceTime Available Immediately - Can be inspect Hjdpfsxu Uc Hex Agzjg Can be test

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour Hedpfx Aou Thcvogzjg bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 2020, Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Hsdpfxjxuvnqj Agzjg

Condition: used, - Brand: Haulotte - Type: Compact 12DX - Year of construction: 2018 - Weight: 4060 kg. - Hours: 1284 hours - Working height: 12 meters - Lifting capacity: 450 kg. - Extendable work platform - Drive: Kubota diesel - Stamp feet Hedpfsxtf Ttsx Agzog - New safety inspection possible - Aerial work platform book available - CE document available - 1st Owner - Video on our website - Trade-in and transport possible * Brand: Haulotte *Type: Compact 12DX * Construction year: 2018 * Weight: 4060 kg. * Hours: 1284 hours * Working height: 12 meters * Lifting capacity: 450 kg. * Drive: Kubota diesel

Condition: refurbished (used), Year of construction: 2001, Koenig Mini Rex 4000 Futura bun roll machine 2-pockets with formstation DR-RR 400. For the production of rounded, long-rolled, long-rolled and folded as well as flattened products new drum and pistons SKG54-AKG70 weight range 25-140 grams several weight ranges with other drums is possible through the use of combined stamp sizes, on request max. cap. 4000 pcs/h year of build 2001 compact design fully automated dividing and rounding of wheat doughs and rye- -wheat doughs with a maximum rye percentage of 40% excellent results with the production of round, long-rolled, long-rolled and folded as well as flattened goods tried-and-tested in thousands of in-store bakeries height-adjustable calibrating head, folding net belts, lower belt and upper belt for ergonomic working with the following functions: transporting, long rolling, pressing flat Hjdpjxtat Isfx Agzjg teflonised collecting drawer for manual product removal high level of operating comfort quick and easy cleaning on account of plug-in elements stainless steel design power supply: 1.5 kW weight approx. 460kg

Condition: new, Year of construction: 2024, This machine is designed for labelling on the cylindrical products side. The LR-120 comes with 150 mm wide belt conveyor and is ideal for manufacturers which are packing the food, cosmetic, personal care, nutraceutical, electronic. Features: * Stepping Motor for fast and accurate labeling performance; * Controlled by Microprocessor, LED display; * Labels Counting feature / Production Run Counter; * Label sensor for Paper or Opaque labels; * Main structure of machine is made by anodize aluminium that CNC processing; * Height and angle are adjustable; * In Line Application or Independent Operation; * Modular design for easy maintenance / Quick and easy Change over; * Capacity: up to 120 containers per minute. Hsdpfxjg Ntuto Agzeg Options: * Inkjet printer; * Hot stamping coding machine; * Barcode Printer; * Transparent Label Sensor; * Conveyor speed adjustment possibilities.

Condition: new, Special die and stamp ( 28477) Make Bosch Number 2608639902 suitable for GNA 1,3 GNA 1,6 GNA 2,0 unused in original box Hedpfetqlq Dex Agzsg

Condition: good (used), Item: AJ-Hamba BK6005/5 Filling machine for cups HAMBA BK 6005/5 cup filling and sealing machine Made in Germany In good used condition. The machine can be used for filling yogurt and similar products in cups. Capacity: 8000 - 10000 cups/ h Lanes: 5-Lanes longitudinal machine Hodpoi Atkqefx Agzsg Actual Cup-size: Ø 75 mm Height: 90 mm Main Filler: - manufacturer: Hamba - filling range: 100 cm³ to 250 cm³; - cleaning: CIP-able Closure: Sealing Date Device: Stamp Measurements (lxwxh): 4,3 m x 1,3 m x 2,2 m Power: 380 V; 21 A; 8 KW

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm Hedjxhfu Hepfx Agzjg X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch Hjdpfx Agsxn Tywjzsg - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: used, Year of construction: 2010, Koenig Combi line KCL/7 modular bun roll line for the production of high quality products: round, oval, rounded and stamped, long rolled and stamped, flattened Konig Rex Basic headmachine 3, 4 or 5 rows SK 67 weight range 55-120 gram capacity 3, 4, 5 row maximum 4500, 6000 or 7500 pcs/h König Combi Line CL600+WDK+RR+AB consisting of: Hjdpfoxr Ichsx Agzeg pre-long rolling station R600 Siemens digital control panel pre-prover VG190/230 stamping device with 2 stamps: Kaiser stamped forming station R600 setting unit AS600 year of build 2010 pictures BEFORE reconditioning

Condition: new, Year of construction: 2025, machine/vehicle number: MOT01-300, coil inner diameter: 250 mm, coil outer diameter: 1,450 mm, coil weight: 1,000 kg, coil width: 300 mm, product width (max.): 300 mm, overall weight: 300 kg, load capacity: 1,000 kg, spreading range: 250 mm, Automatic coiler or decoiler Remote control console - wireless Automatic and manual working mode Speed fine tuning potentiometer Danfoss inverter Synchronized easily with punching line Hodpfjb H R Ayex Agzog Ideal for stamping automatic lines Coiler motorized Central expansion Run both directions, forward and reverse Loop sensors control Speed from 0.1 RPM to 28 rpm Motor with gear reducers Capacity max. load 1 ton Strip width up to 300 mm Inner diameter min 250 mm max. 520 mm Outer diameter max. 1450 mm Power 0.75 KW Dimension 1.200 mm x 1.200 mm height 1.600 mm Weight cca. 300 kg with CE certificate On stock also high speed presses Schaal, Mabu and Bruderer presses as well bas band saw blade welders

Condition: good (used), Year of construction: 1998, Fortuna roll production line - used - year of manufacture: 1998 - automatic divider KM5/4 - intermediate proofer with stamping station and cutting station - for production of Kaiser rolls, cut rolls, round rolls, donuts - maximum capacity approx. 5,000 pcs/hour - weight range 20-90 g - discharge of rolls onto trays or into feeding units - computer control - ex stock Hjdpfx Agoxva Abszsg - price on request

Year of construction: 2004, condition: good (used), coil, coil edge guide brake load cells 12 holographic spool unwinders hot stamping unit cooling suction hood with collection bag boiler refrigerator Hjdjmmc Uijpfx Agzeg electrical panel operator panel

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm MACHINE DETAILS Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg Hodpfx Ajxhfnaegzog

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole Hjdpfxeh T Ulyo Agzsg

Condition: used, Year of construction: 2003, Seewer Rondo Croissomat SCMG for the production of filled and unfilled croissants, the pneumatic filling depositor deposits soft to firm fillings in two to four rows. It even processes fillings with small pieces of fruit or vegetables without difficulty Hedpfx Aewgwwgegzsg year of build 2003 for filled and unfilled croissants laminated and non-laminated doughs up to 900 unfilled croissants per row per hour (max. 4.500 units), two to five rows up to 700 filled croissants per row per hour (max. 2.800 units), two to three rows calibrator year of build 1997 pneumatic filling depositor year of build 2006 usable dough-sheet width approx. 530 mm speed of conveyor belt 9 m/min 1 stamping knife is included, additional stamping knives are available on request pictures BEFORE reconditioning

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97102, type of input current: three-phase, input voltage: 220 V, pressing force: 10 t, compressed air connection: 6 bar, Baier Prägepressen GEBA 4/B Hotstamping Machine Pressing force: 10 tons This machine was used for decorating plastic objects by means of hot stamping technology. Suitable for printing with gold and silver foil. The machine is also equipped for positioning and printing heat transfers. Very robust construction. Works well. The machine is equipped with a sliding table for printing smaller quantities, using a single holding jig. Also included is a Weiss rotary table with eight positions, enabling high production speeds with eight product holders in operation. Hsdpfexpudgex Agzsg

Condition: good (used), Year of construction: 2018, operating hours: 2,109 h, fuel type: hybrid, color: green, Weights Empty weight: 2.840 kg Functional Mast: articulated arm Working height: 2.000 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 1000 m Transport dimensions (LxWxH): 5x0,84x2 Latest inspection: 2024-08-28 Production country: IT Additional information Please contact Vink Machinery for more information Hinowa Lightlift 20.10 IIIS * 2018 * 2109 working hours * Petrol and 230 volt drive * 20 meter working height * 10 meter horizontal reach * Adjustable tracks Hsdpfx Agswrp Afozog * Remote control * Stamping machine * ​​incl. documents

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,284 h, functionality: fully functional, feed length X-axis: 685 mm, feed length Z-axis: 200 mm, travel distance X-axis: 685 mm, travel distance Z-axis: 200 mm, chuck outer diameter: 250 mm, rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, total length: 3,100 mm, total height: 2,650 mm, total width: 4,000 mm, rotational speed (max.): 6,000 rpm, torque: 460 Nm, overall weight: 7,800 kg, controller model: Siemens 840D, control type: CNC control, Equipment: cooling unit, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Features: Hodew Dyqdspfx Agzeg - Infeed and outfeed conveyor (O-belt) - Pneumatically operated transfer unit - Stamping unit - Chip conveyor (ejection left) - Coolant system - Tool turret 12x VDI40 The machine is powered and available for inspection.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Leibfried, pneumatic cylinder double-acting type L 81 .: 43 881 Stroke: 110 mm -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 267/80/H70 mm Hodpfxoxay Ulo Agzsg -Weight: 2.1 kg/piece

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-25-PPV-A Hsdpfoxay Rasx Agzeg -Stroke: 25 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Hole: Ø 16 mm -Max. pressure: 12 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 265/80/H130 mm -Weight: 2.4 kg/piece

Condition: good (used), Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, compact cylinder, short-stroke cylinder Hsdpexayxdjfx Agzjg -Manufacturer: Joyner, pneumatic cylinder type DUJ-22-60/50 -Stroke: 50 mm -Piston diameter: 60 mm -Piston rod: Ø 16 mm -Hole: Ø 16 mm -Dimensions: 245/80/H105 mm -Weight: 1.9 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Knorr-Bremse, pneumatic cylinder type DU-80/100 -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 20 mm Hodexayvcepfx Agzog -Hole: Ø 18 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 315/100/H100 mm -Weight: 4.2 kg/piece