Used Steam Generator for sale (11,081)

Condition: used, Flow steam generator with 13,2 kW Electricity: 400 V Pressure steam max.: 2,5 bar Iodpfxoxyttbo Abvoth Сapacity:  approx. 20 kg/h steam

Condition: used, Durchlaufdampferzeuger mit 23,1 kh/h Leistung: 35 kg/h Dampf Strom / Volt: 400 Itedexytrwspfx Abvjh Leistung pro Stunde: 35 Zolltarif Nummer: 84022000

Condition: used, Flow Steam generator with electrical power: 16,5 kW Max. steam capacity: 25 kg/h steam  Max. steam pressure: 2,5 bar Unlimited steaming, immediately ready for use, Electricity: 400 V Iedjxytrqopfx Abvsth customs no.: 84022000

Year of construction: 2006, condition: ready for operation (used), Output: 1.5t steam/h, max. nominal power: 1093kW/h, gas pressure: 50mbar, fuel: natural gas, including water container, two pumps, safety devices and steam dryer. Itodpfx Abef Tdcuovsh

Condition: used, Steam-heated clean steam generator with condensate cooler for feedwater preheating and fresh water injection via a control valve. Ready-to-connect clean steam generator, installed on a base frame, including all piping, compressed air lines, control cabinet, and cabling. Year of construction: 2019. Design data: Power: 531 kW Clean steam output: 700 kg/h Itedpfx Abowgkyhovjh Clean steam pressure: 0.8 bar Feedwater: 15 °C Min. feedwater pressure: 2.0 bar Heating steam pressure: 4.0 bar Heating steam output: 700 kg/h Documentation and operating instructions available. Please contact us if you are interested.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: ALBA 350 kg/h, Steam generator 350 kg/h, 245 kW, gas burner. Incl. water treatment. Itodpfx Abjw Ud Elovjh

Condition: excellent (used), Year of construction: 2011, pressure: 11.77 bar, operating pressure: 12 bar, For sale: Manara steam generator with gas burner. Available with oil burner on request. Type: GS 200 Steam output: 2000 kg/h. Iodoydq Thjpfx Abveth Maximum steam pressure: 11.77 bar. Delivery available for an additional charge. If you have any questions, please feel free to contact us.

Condition: like new (used), Year of construction: 2012, operating hours: 3,432 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with gas burner Type C 600 Steam output: 600 kg/h. Max. steam pressure: 13 bar. Like new, only 3,432 operating hours. Delivery available at extra cost. Itjdpfoydq Niox Abvsh If you have any questions, please contact us.

Condition: excellent (used), pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 320. Steam output 320 kg/h. Maximum steam pressure 13 bar. Delivery available for an additional charge. On-site inspection possible. If you have any questions, please contact us. Iedpfsydq E Dex Abvjth

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model: DG 360. Year of manufacture: 2009. Steam output: 360 kg/h. Max steam pressure: 13 bar. Itsdpfjydq Ewox Abvoh Delivery available at extra cost. On-site inspection possible. Feel free to contact us with any questions.

Condition: excellent (used), Year of construction: 2011, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture: 2011. Steam output: 360 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. Inspection on site possible. Please contact us if you have any questions. Itjdpfx Absydqxdjvoh

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, empty load weight: 1,450 kg, For sale is a Jumag steam generator with oil burner. Optionally available with gas burner upon request. The unit is in very good condition. Model DG 560. Year of manufacture: 2011. Steam output: 560 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Please contact us with any questions. Isdjydnzispfx Abveth

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Isdpfx Abswn H Auoveth Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Itedpfx Absw Ev Twjvoh Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 15,591 h, functionality: fully functional, machine/vehicle number: 232346, overall weight: 12,125 kg, fuel type: diesel, 880 kVA generator Iodpszckwkofx Abvsth

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Itodpfew U N Daex Abvjh

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller Itsdpfxoxfrv Eo Abvsh CNC Top Ten bv Coevorden, Netherlands

Condition: ready for operation (used), Boiler plant for production of steam. Capacity : up to 12 MW Production capacity 16 ton per hour at 20 bar steam. Working pressure : From 5 bar to 20 bar Steam temp 215 degrees C Designed for solid fuel like, wood chips, sawdust, bark Iedpfx Abjy Av Rdevsth

Condition: excellent (used), Industrial steam blanching machine for sale. Full line with concord boiler etc. Ijdpfxjytraue Abveth More details available on request.

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Itodjyl Nntepfx Abvjh

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period. Itedpfsx U Tgmsx Abveh

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Maximum overpressure in the pipes: 0.2 bar Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pipe volume: 40 l EQUIPMENT Dew point or cp control Itsdpozddb Eofx Abvsh Soot filter in duplex version Fully automatic power control in the range of 50-100%

Condition: used, Little used Proton OnSite C20 electrolytic hydrogen generation system made in 2018. Iodszcwkkjpfx Abvjth The system was installed and tested but never put into operation due to owner dropping the project. Key information includes: - Capacity: 20 Nm3/h, 760 SCFH, 359 SLPM, 43.3 kg/24 hours. - Purity: 99.9998%, water vapour

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm Iodpfx Asruakgsbvsth 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Itsdsxaqa Sopfx Abvjh Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg