Used Stitch Welder for sale (625)

Condition: ready for operation (used), Year of construction: 1993, 6 Stutznäcker single-needle lockstitch sewing automats are offered. Outside frame size X/Y: 1900mm/2600mm, max. stitch rate: 2600stitches/min, sewing type: lockstitch, sewing head/gantry: Mammut Class 750, linear unit X-axis: Hauser HLE 150 (installation position right), Y-axis traverse: ball screws/linear guide rails, control system: Hauser Comtac 2000. Equipment: Electronically synchronized separate drive for needle and hook, pneumatic presser foot lift, upper thread monitor, frame coding for safety monitoring, coated table plates as frame supports within the travel area, various frames, spare hooks, electrical cabinet on the right, operator panel on the right-hand side table and left-hand side table with pneumatically lowerable table top (max. 200mm) and surrounding support for the frame. Four sewing automats were retrofitted in 2007, two sewing automats in 2006. Dimensions X/Y: approx. 5000mm/7000mm, weight: approx. 2000kg. The machines are available from April 2027. Inspection possible by appointment. Ljdpfx Akeznx I Toqehn

Condition: used, Seven Pfaff industrial sewing machines are available. 1) 2 × Pfaff 1183 industrial sewing machines, one with drive and one without drive, stitch type: lockstitch 301, needle system: DBx1/134R, needle size: 60Nm-90Nm, max. stitch length: 4.5mm, max. sewing speed: 5500stitches/min, needle bar stroke: 32mm/36mm, presser foot clearance: 9mm-13mm, working space X/Y: 260mm/125mm, sewing head dimensions X/Y/Z: approx. 550mm/180mm/300mm, sewing head weight: approx. 30kg. 2) Pfaff 563 industrial sewing machine with drive, stitch type: lockstitch 301, max. sewing speed: 5500stitches/min, max. stitch length: 3.5mm/4.5mm, needle system: 134, needle size: 60Nm-100Nm, needle bar stroke: 33mm, balance wheel diameter: 65mm. 3) Pfaff 134 industrial sewing machine without drive, single-needle flatbed version with horizontal rotary hook, needle system: 134, working space X/Y: 295mm/140mm, max. sewing speed: approx. 3150stitches/min, forward and reverse sewing possible. 4) 3 × Pfaff 463 industrial sewing machines. In total, five machines with drive and two machines without drive are available. An on-site inspection is possible. Lsdpfx Ajzvy E Njkqohn

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Ljdpfjxrb Tgjx Akqehn Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: new, SHAFTS DEDICATED FOR HAMMEL VB 850. ALSO AVAILABLE WITH SIDE COMBS PROTECHNIKA is a company with 21 years of history and, since the start of its operations, has been engaged in the production of spare parts and complete recycling lines. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. By implementing automated welding processes and developing our own manufacturing technology, we have minimized production times while maintaining consistent, high quality. Grinding shafts are a series-produced product, which, among other advantages, enables us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality Lhodox Hhfzopfx Akqsn - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 welder qualifications - ISO 9001:2015 - ISO 14001 - Independent design department capable of fulfilling any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are of paramount importance to us, because their satisfaction is our success!

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — Lhjdpfx Asx Da D Uokqen If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 16 stations + manual feeder High-stack feeder, 70 cm SFT 350 S (stitching/folding/cutting) S3 collating station with shaking function A4 landscape orientation Spare knife set Lhedpfxozrxfgo Akqjn Electronic double-sheet, misfeed and stitch wire detection 3 Hohner stitching heads, Universal 43/6 S Compressors Approx. 11.9 million stitches

Year of construction: 2022, condition: used, Year: 2021/2022 Condition: very good, functional Counter: 13M envelopes Machine Type: Automatic mailing and fulfillment line for collating, inserting and sealing envelopes with the capability of processing rigid and thick products. - Manufacturer: CMC S.p.A., Italy - Model: CMC Smart Mailer / Rigid Mailer Special Technical Specifications: - Maximum mechanical speed: up to 4,000 envelopes/hour - Envelope width: 250–350 mm - Envelope length: 280–350 mm (including flap) - Product thickness: min. 2 mm / max. 25 mm - Recommended envelope flap height: 50–70 mm Configuration: - 2× A15 – Electronic hopper feeders for rigid and thick products - A21F – Photocell-controlled thickness gauge Lhedpfx Aoztc Afokqon - 3× A14Q – Sheet feeders for inserts - SEP1 – Rotary separation disc - F15 – High-speed sheet feeder - A14_Env_L – Large envelope feeder - Vacuum Belt – Vacuum conveyor - HM1 – Automatic programmable hot-melt gluing system with 1 glue gun - RA20_i – Conveyor for collation of staggered products - PC_Add Special – Software for print verification, barcode reading and database management - 2× SDC – Sound-deadening boxes for vacuum pumps - F15 High-Speed Sheet Feeder - Minimum format: 80 × 110 mm - Maximum format: 210 × 300 mm - Minimum paper weight: 70 gsm - Maximum product thickness: 2 mm - Loading capacity: up to 500 sheets - Double-sheet detection system - Brushless motor drive - A15 Hopper Feeder - Product length: 120–320 mm - Product width: 100–300 mm - Product thickness: 1–25 mm - Suitable for rigid products, stitched products and bound booklets. - A14Q Sheet Feeder - Product length: 100–210 mm - Product width: 110–300 mm - Product thickness: from 1 sheet (70 gsm) up to 4 mm - Minimum paper weight: 70 gsm - Utilities - Main power supply: 14 kW, 400 V AC, 27 A, 3-phase + N + PE - Auxiliary power supply: 3 kW, 230 V AC, 15 A - Compressed air: approx. 600 l/min at 6 bar - Clean, dry and oil-free compressed air required. Machine Dimensions: According to the machine layout, the main production line has an overall length of approximately 10,100 mm with a maximum overall width of approximately 4,300 mm. The layout is indicative and subject to final machine configuration. Machine Description: The CMC Smart Mailer is a high-performance automatic mailing and fulfillment system designed for collating, verifying, inserting and sealing envelopes. The machine is capable of processing single sheets, inserts, stitched brochures, bound booklets and other rigid products up to 25 mm thick. Equipped with automatic thickness control, double-sheet detection, barcode reading, print verification, database management software and programmable hot-melt gluing, the Smart Mailer ensures maximum production efficiency, accuracy and reliability. With a mechanical speed of up to 4,000 envelopes per hour, it is an ideal solution for direct mail, transactional printing, fulfillment and document mailing applications.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 000000000000001, overall weight: 200 kg, load capacity: 5 kg, arm reach: 900 mm, pivoting range: 360 °, controller model: MC-05 Controller, teach pendant model: Teach Pendant Serie MC, control cabinet width: 440 mm, control cabinet height: 290 mm, input voltage: 400 V, input current: 32 A, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, wire diameter (max.): 2 mm, protection type (IP code): IP54, welding current (max.): 500 A, Equipment: CE marking, documentation/manual, type plate available, METALSELF CI SERIES COLLABORATIVE ROBOT CELLS – WELDING AND FLEXIBLE AUTOMATION ⚠️ CURRENT PROMOTION: Contact us to discover the exceptional discounts currently available on the entire Metalself cobot range! We offer "Plug & Play" collaborative production cells, customizable to your specific needs with the entire Metalself CI Series cobot range. A smart and scalable investment that combines the precision of robotics with human flexibility, with a rapid return on investment thanks to significantly lower operating costs compared to traditional robotics. INTEGRATED WELDING PACKAGE Our cells are designed with native and optimized integration for welding processes (MIG/MAG, TIG, Laser). Supplied complete with intuitive proprietary software, they can compensate for the shortage of specialized welders. -Drag-to-Teach: Quick programming by manually guiding the arm in "zero-gravity" mode. -Advanced functions: Weaving (for vertical welds), multi-layer welding for deep joints, and Array function for matrix welding on component tables. ONE ROBOT, ENDLESS APPLICATIONS Metalself cobots are not limited to welding. Thanks to the open architecture (LUA, C/C++, Python, ROS languages) and the integrated I/O interface, the same machine can be reprogrammed in just a few minutes for over 200 industrial scenarios. Purchasing a Metalself cobot means having an tireless operator for: -Machine Tending: Automatic and continuous loading and unloading of metal or plastic components on CNC machining centers, lathes, and presses. -Palletizing and Logistics: Transfer of materials, packaging, and stacking of boxes at the end of the line 24/7 (ideal with the CI-16 and CI-20 models). -Screwing and Assembly: Micro-precision operations for the automotive and electronics (3C) industries, interfaceable with machine vision systems. THE COMPLETE RANGE (From 3 kg to 20 kg) We configure your cell by choosing the perfect cobot for your requirements: * CI-03: Payload 3 kg / Reach 600 mm * CI-05: Payload 5 kg / Reach 900 mm * CI-10: Payload 10 kg / Reach 1300 mm * CI-16: Payload 16 kg / Reach 1000 mm * CI-20: Payload 20 kg / Reach 1650 mm SAFETY All models are equipped with advanced collision detection and 5 safety functions that comply with EN ISO 13849-1 (PL d) regulations. They work in close proximity to personnel without the need for expensive and bulky perimeter fences, with full CE certification. DELIVERY TIMES AND QUOTES Lhsdpfx Aezxhmyekqen * Supply times: Cells are manufactured and delivered in 40-50 working days. Request a personalized quote: contact us, explaining your application (welding, machine tending, palletizing). Our technicians will configure the cell to your specific needs, selecting the ideal arm and necessary accessories, and applying the current promotional discount.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: ET.200.0100.2026, overall weight: 32 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder | NEW, MADE TO ORDER (Fully Configurable) Metalself Srl presents the ET-200 orbital TIG welding system, the ultimate solution for high-precision pipe welding. The machine is supplied We guarantee fast delivery times of 15-20 working days. EXCLUSIVE END-OF-YEAR PROMOTION: For all configurations ordered by December 31st, we are offering a special company-wide promotional campaign. We invite you to contact us directly to request a customized quote and discover the discounts applied to the purchase of the new machine! ADVANTAGES OF THE METALSELF ORBITAL TECHNOLOGY: The orbital welder automates the TIG welding process of pipes by rotating a torch around the joint to create precise, uniform, and repeatable welds. This technology often eliminates the need for a skilled welder, reducing reliance on the operator's manual skills, increasing production speed, and lowering long-term costs. TECHNICAL DATA OF THE POWER SOURCE (ET-200 GENERATOR): -Generator Type: Inverter power source controlled by a microprocessor. -Input Voltage: 220VAC ±10% (110V optional). -Frequency: 50/60 Hz. -Power Consumption: 4.5 KVA. -Welding Current: Adjustable from 5 to 200 A. -Current Control: DC mode (direct current, for greater thicknesses) and Pulse mode (for precise heat control, ideal for stainless steel, titanium, and thin walls). -Memory Capacity: Up to 200 welding programs can be stored. -Intelligent Programming: "Auto Prog" function automatically generates optimal parameters by simply entering the head model, diameter, and thickness of the pipe being processed. -Control and Traceability: On-board thermal printer for issuing reports at the end of the cycle and USB port for digital data export. -Cooling: Integrated water circulation system. -Sound Emissions (LpA) < 70 dB(A). Ledjzxh Udspfx Akqjhn CONFIGURABLE WELDING HEADS (CLOSED CHAMBER SERIES): The ET-200 power source can be combined with various closed-chamber orbital welding heads, depending on the diameters you need to work with. All heads use Argon gas and water cooling to ensure continuous and long-lasting cycles: * Model 5H: For tubes from Ø 6.35 to Ø 12.7 mm (Max thickness ≤ 1.5 mm) - Head weight: 1.5 kg. * Model 10H: For tubes from Ø 6.35 to Ø 25.4 mm (Max thickness < 2 mm) - Head weight: 1.8 kg. * Model EC40: For tubes from Ø 6.35 to Ø 38.1 mm (Max thickness ≤ 2.5 mm) - Head weight: 3.5 kg * Model EC80: For tubes from Ø 12.7 to Ø 76.2 mm (Max thickness ≤ 3 mm) - Head weight: 5 kg. * Model EC120: For tubes from Ø 19 to Ø 114.3 mm (Max thickness ≤ 3 mm) - Head weight: 6.5 kg. * Model EC170: For tubes from Ø 50.8 to Ø 165.2 mm (Max thickness ≤ 3 mm) - Head weight: 14 kg. THE SUPPLY INCLUDES: -ET-200 power source and welding heads chosen during the configuration phase. -Complete connectivity (power cables, ground cable, water/gas hoses). -Operating and maintenance manual. -Nameplate and CE marking (compliance with Machinery, Low Voltage, EMC, and RoHS Directives). -Optional: Trolley for housing and joining tubes -Specific video training Don't miss out on the end-of-year promotion!

Condition: good (used), Year of construction: 2020, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, overall weight: 4,500 kg, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, safety light barrier, HYDRA is a high-speed, two-head digital quilting machine, equipped with a fully automatic double-feed system, designed for the furniture, mattress, and home textile industries. It performs all operations: feeding via motorized rollers, quilting, and cutting of the duvet or padding to the desired length. The double-feed system allows quilting of two rolls simultaneously, while also offering motorized width adjustment for single-feed mode, with a changeover time of just 20 seconds. This double-feed system is ideal for large-scale production of sofas and headboards, doubling the manufacturing capacity through the simultaneous quilting of two rolls. Conversely, switching to single-feed mode allows for the quilting of high-end mattresses and large-format home textile items. No rework machine required: the ability to resume stitching at the exact stopping point or at the desired point. Automatic parking in case of upper or lower thread breakage. Automatic measurement of the maximum physical stitching area for cross-verification with the active pattern. Easy adaptation of quilting patterns. Motorized adjustment of the width of the side and center roller clamps. Your sofas, mattresses, headboards, and duvets will stand out for the quality of their stitches, their patterns, their durability, and your increased efficiency. Key features: High-quality Dürkopp Adler sewing head with spare parts available worldwide. Upper and lower thread trimming in 0.5 seconds. Simultaneous quilting of two different rolls for increased productivity. Single-roll feed mode available, with switching between single and double modes in seconds. Statistical production graphics: stitch length, pattern name, customer name, stitching time, number of stitches, etc. ElektroteksCare: online after-sales service. Advanced side cutters. Easy troubleshooting through error code display. Adjustable material tension in both directions. Reliable Omron control system offering maximum efficiency. Ergonomic feeding system for multiple rolls. Lhedpozx Sw Ajfx Akqon High-durability pneumatic system with low air consumption.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) Lhsdpjy Ipy Ajfx Akqen • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: new, mileage: 54 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,635 kg, maximum load weight: 865 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,585 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 3,230 mm, loading space width: 2,020 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, central locking, crane, immobilizer system, onboard computer, soot filter, trailer coupling, - Renault Master (new model) with aluminum flatbed and loading crane, immediately available for rent with purchase option - Renault Master FWD Advance L2H1 3.5t dCI 150 Euro 6e chassis - Cab paint: slate gray - Interior: black - Upholstery: Advance fabric (dark gray mélange with gray stitching) - Air conditioning Ledpezh I Suofx Akqohn - All-weather tires - Reinforced alternator 230A and reinforced battery 95Ah - Trailer coupling 2500kg - Payload 865kg, permissible total weight 3500kg Aluminum flatbed: - Internal dimensions: 3230mm x W 2020mm x H400mm - Floor panel: 18mm - Floor frame with airline track around the perimeter - Airline track also in the front panel - Side walls: aluminum, anodized, with folding steps, easily removable - Toolbox Loading crane: - Load capacity at 1.1m = 995kg, 1.9m = 585kg, 2.7m = 410kg, 3.55m = 300kg - Loading crane basic unit design according to CE directive (EN 12999) - All hydraulic cylinders are double-acting - Piston rods are hard-chrome plated - Pressure relief and load holding valves - Electronic overload protection with acoustic 90/100% warning - Incl. MLC (08.E5) and CE control panel, incl. emergency stop - Control unit with 4 control valves, operable from one side - Special color RAL 7015 slate gray (matching the chassis), all cylinders painted black - Load hook - MLC - Micro Load Control - Height warning device - Warning device for M.O.L. with 2 support legs in the FH - 2.70m basic unit telescopic crane - Mounting - cross member with support leg extension for support on both sides with 2 hydraulic support legs, swivelable and manually extendable CE, incl. M.O.L. - Electro-hydraulic pump unit 12V and preparation for control unit - Mechanical swivel angle limiter 180° - Zinc primer - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Mechanical arm extension M, lift 0.95m Errors and prior sales excepted ?is=OKty2pMStDzdQppi ... air conditioning, VAT can be shown, ABS, multi-function steering wheel, radio, on-board computer, heated mirrors, electric front windows, electric door locks, central locking with remote control, driver's airbag, trailer coupling, power steering, interior filter, outside temperature display, tinted windows, electrically adjustable mirrors, spare wheel, cab: closeout sale, electric windows, heat-reflecting glass, crane, new, emission class: Euro 6, diesel, front-wheel drive, very good condition, HSN 3333, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, particulate emission sticker: 4 - Green

Condition: used, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1, We are selling the complete garment manufacturing machinery from our former knitwear factory. The machines shown are available for sale and are part of a larger inventory of textile production equipment. Please find the attached Excel spreadsheet containing a list of all 165 machines. We also welcome offers for this complete machinery package. Lsdpfx Akezimkxoqshn Thank you, and we look forward to hearing from you. | Machine type | Quantity | | ----- | ----- | | Lockstitch sewing machines | 36 pcs. | | 2-needle lockstitch sewing machines | 4 pcs. | | 4-needle lockstitch sewing machine | 1 pcs. | | Overlock sewing machines | 51 pcs. | | Coverstitch sewing machines | 32 pcs. | | Flatlock sewing machines | 6 pcs. | | Cup seaming machines | 3 pcs. | | Linking machines | 3 pcs. | | Arndt sewing systems | 5 pcs. | | Blindstitch sewing machines | 5 pcs. | | Blindstitch spot tacking machines | 4 pcs. | | Shell stitch sewing machines | 2 pcs. | | Buttonhole sewing machines | 2 pcs. | | Button attaching machines | 8 pcs. | | Bartack sewing machines | 3 pcs. | | Total Quantity | 165 pcs. |

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, overall weight: 73 kg, load capacity: 20 kg, arm reach: 1,700 mm, pivoting range: 360 °, controller manufacturer: Doosan Robotics, controller model: DSC, teach pendant manufacturer: Doosan Robotics, teach pendant model: TP, input voltage: 220 V, input current: 6 A, type of input current: AC, repeat accuracy: 0.05 mm, Doosan Robotics H2017 Collaborative Robot (Cobot) – 20 kg payload, 1700 mm reach. The robot has been used for laser welding and is in as-new condition with only 260 operating hours. It is fully functional and ready for immediate deployment. The robot is delivered complete with a stand, which is included in the price. The stand is designed to be easily moved with a pallet jack, allowing flexible positioning in the production environment. The laser welder (Gweike 1500W) is available as an add-on for 15,000 EUR – contact us for more information. Please note: The robot is not CE certified in its current configuration. Technical specifications: - Payload: 20 kg - Reach: 1700 mm - Degrees of freedom: 6 - Repeat accuracy: ±0.05 mm - Robot weight: 73 kg Lhodpjzia Evjfx Akqsn - Input voltage: 220V AC - Protection rating: IP54 (robot body) - Controller: Doosan Smart Controller (DSC) The robot is equipped with built-in force/torque sensing on all 6 joints, enabling safe human-robot collaboration without safety fencing in many applications. It supports Doosan's intuitive programming environment and is compatible with a wide range of end-of-arm tooling and accessories. Suitable for: laser welding, laser cutting, machine tending, palletizing, assembly, material handling, and other industrial applications.

Condition: new, mileage: 60 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,450 kg, maximum load weight: 1,050 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,585 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 3,000 mm, Equipment: ABS, air conditioning, airbag, central locking, immobilizer system, onboard computer, soot filter, trailer coupling, - Renault Master City roll-off tipper for containers, approx. 3000mm - body with lifting capacity of 3T and telescopic extension with tilting mechanism for a reduced loading angle - Small truck, driver's license class B (car driver's license) - Delivery time: 5 months after order - Chassis: Renault Master FWD Advance L2H1 3.5t dCI 150 Euro 6e Ljdoztkvaspfx Akqjhn - Cabin paint: Slate Gray - Interior color scheme: Black - Fabric upholstery: Advance (dark gray mottled with gray stitching) - Air conditioning - All-season tires - Reinforced alternator 230A and reinforced battery 95Ah - Trailer coupling 2500kg - Payload without container approx. 1050kg. Permissible total weight 3500kg - This vehicle is a freely configurable order vehicle. The shown equipment serves only as an example. You can still flexibly adapt the engine, color and extras according to your wishes. Subject to errors and prior sale ... Air conditioning, VAT can be shown, ABS, multifunction steering wheel, radio, on-board computer, heated mirrors, electric windows front, electric immobilizer, central locking with remote control, driver's airbag, trailer coupling, power steering, interior filter, outside temperature display, tinted windows, electrically adjustable mirrors, spare wheel, cab: near sales, electric windows, thermal protection glazing, new, emission class: Euro 6, diesel, front-wheel drive, very good condition, HSN 3333, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, particulate matter badge: 4 - Green

Condition: good (used), Duplo DSC-10/20 + DBM-150 + DBM-150T Booklet Making Line This machine is in very good condition and is the latest booklet making system from Duplo. Made in Japan, 2018. Controlled via a control panel. The line consists of: – DSC-10/20 collator – vacuum feeding – LUL-HM manual feeder connector Lhedpjzw T Dhsfx Akqsn – DBM-150 stitching and folding unit – stitching and folding in one unit – DBM-150T front trimmer – Long outfeed table – Built-in stacker for stacking sheets. The machine includes documentation, small parts, etc.

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Lsdpfx Aszmx Scskqohn Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, Electrofusion Welding Machine, Electrofitting Welder, Welding Unit, DYTRON SVEL-1a, Used Machine Manufacturer: DYTRON Model: SVEL-1a Lsdpfeyiarhex Akqshn Overall Dimensions: Width: 300 mm Depth: 270 mm Height: 90 mm

Condition: excellent (used), Computer control capability 2xDSC - 10/60i DBMi Saddle System Automatic collection, stitching, and folding of brochures iSaddle System – precise spine-line stitching Lhjdjxtxgyopfx Akqen Compatible with various types of feeders (Duplo DSC, DBM, etc.) High accuracy and finishing quality Quick format changeover Ideal for the production of brochures, catalogues, and magazines in digital or offset printing

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 Lodpfoymautox Akqshn with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Condition: excellent (used), Year of construction: 2006, Used high-performance roll garbage bag manufacturing machine for sale. Includes: Roll lifter, longitudinal welder, folding unit, bottom welder, and labelling unit. The machine is in perfect operational condition and can be viewed in production. For sale with factory support and spare parts due to underutilization. Lsdpfoykz Ebox Akqjhn Technical Specifications: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive: Servo - Number of tracks: 2 Additional Specifications: - Heavy-duty, automatic 2-track roll garbage bag manufacturing machine - Film thickness: - LD/LLDPE: 0.012–0.060 mm (single layer) - HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (depending on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm Single-line labelling unit: - Label width: 70–200 mm (1 line) - Label length: 180–350 mm - Label roll diameter: max. 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife and longitudinal welding unit 3. TA-800C1 Bag making & welding machine 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Other information: - Warranty: No warranty - Current status: In production - Availability: Immediate - Power requirement: 20 kW - Price: EUR 50,000

Condition: used, machine/vehicle number: 0000622128, EWM Titan XQ 400 puls DW Compact, used Model: Titan XQ 400 puls EMC class: A Minimum welding current (A): 5 Maximum welding current (A): 400 Duty cycle at 40°C: 400 A / 80%, 370 A / 100% Open-circuit voltage: 82 V Mains voltage: 3 x 400 V Voltage tolerance: -25% to +20% Recommended generator power: 23.8 kVA Mains frequency: 50 Hz / 60 Hz Cooling capacity: At 1 l/min: 1000 W Pump pressure: 3.5 bar Tank capacity: 8 l Protection class: IP23 Lhodpfx Akoyngdwjqen Dimensions: 1150 mm x 678 mm x 972 mm Multi-process pulse MIG/MAG welder with all welding characteristics and processes, non-compact, non-modular Drive XQ and Drive XQ HP wire feeders Swivel console for wire feeder "blueCool" coolant down to -10°C (14°F), 5 l, 5 l Interconnection cable set, water-cooled, 14-pin, 1.8 m Adapter for B300 basket spool MIG/MAG function torch, with OLED graphic display, water-cooled, X-technology, 4 m Ground cable with screw clamp, 450 A / 60%, 70 mm² Pressure regulator with manometer, 30 l Mains plug, installed

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Condition: Like New / Unused Technical Data Product Type: ELUTION / Solution Tank Volume: 3,200 liters Empty Weight: 1,815 kg Material: 1.4404 (AISI 316L) CE Marking: CE 0036 Tank Pressure Operating Pressure: -1 / +3 bar Test Pressure: 4.6 bar Jacket Pressure (Heating/Cooling Jacket) Operating Pressure: -1 / +6 bar Test Pressure: 10.8 bar Temperature Range: -20°C to +150°C Pressure vessel according to PED 2014/68/EU Module G – Single Inspection Notified Body: TÜV SÜD (Identification No. 0036) Permitted Number of Load Cycles: 7,300 / 5,475 at pressure fluctuation ranges of 3.3 / 4.5 bar TÜV / PED / FAT • EU Certificate of Conformity according to 2014/68/EU • Certificate No.: Z-EU-SI-LJU-20-08-2350154-14124056 • Inspection report available • Pressure test with water successfully completed • Approval by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) performed • Module G individual acceptance • Turn-Over Package (TOP) fully available Complete Documentation Available The complete technical documentation package is available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Nameplate documentation • Assembly drawings • Detailed drawings • Welder lists and weld process qualifications • Work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gases • Manufacturer qualification certificate • Non-destructive testing (NDT) reports Lsdpfx Akeykkbxsqshn • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Roughness protocol • Surface treatment report • Operating and maintenance manuals (equipment and components) The documentation scope meets project standards for pharmaceutical plants. Design Features • Double jacket for heating and cooling • Manufactured entirely from stainless steel 316L (1.4404) • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manholes / inspection openings • Clamp and flange connections • Instrumentation pre-installed (pressure, temperature, sensors) • Heavy-duty project design • Lifting lugs for crane handling • PED-compliant pressure design Condition • Never used in production • Stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media Special Feature This is not a standard tank, but a high-quality BRINOX project-built vessel in genuine pharmaceutical quality featuring: • PED Module G individual inspection • TÜV SÜD approval • FAT performed • Complete welding, material, and inspection documentation • Documented surface treatment • 316L construction for sterile applications Project quality for demanding GMP applications – immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Vessel – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Elution / Solution Vessel Volume: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: available (CE 0036) Vessel pressure: Operating pressure: -1 / +3 bar Test pressure: As per TÜV inspection Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: As per TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Single unit inspection Acceptance by notified body (identification number 0036) FAT – Factory Acceptance Test The vessel was tested as part of a documented FAT. The tests included, among others: • Verification of welding documentation • Visual inspection of weld seams • Leak testing • Pressure testing • Surface roughness inspection • Sensor calibration check • Layout and dimensional inspection • Documentation review The complete FAT report including test protocols is available. Lhodpfxjykkhre Akqon SPECIFICATION • Double jacket for heating/cooling • Entirely made of stainless steel 316L • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation ready (pressure, temperature, sensors) • Heavy-duty project construction • Lifting lugs for crane handling CONDITION • Never used in production • Surplus stock from project overrun • Interior absolutely clean • No corrosion • No signs of use • As-new industrial condition • Immediately available DOCUMENTATION – complete and structured Comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Material certificates (3.1) • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive testing reports (NDT) • Analysis certificates for welding consumables and shielding gas • Surface roughness protocol • Surface treatment report • Dimensional accuracy check • Internal pressure test • Calibration certificates • Assembly records • Drawings (detail and overall) • Operating and maintenance manuals Complete documentation file available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media SPECIAL FEATURE This is not a standard tank, but a premium BRINOX project build in true pharmaceutical quality with verified pressure design, full PED conformity (Module G), documented FAT testing, and comprehensive quality documentation. Project-level quality for sterile applications – available immediately.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status Lhodeykkk Hopfx Akqjn According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.