Used Stone Splitter for sale (1,156)

Condition: new, Pizza oven with two floors, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x194cm Internal dimensions: 105x70x15cm Electric power: 2 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Knodpfxeuu H Alj Ak Aea Weight: 500 kg

Condition: good (used), Year of construction: 2021, KELLER – Production line for prefabricated wall panels Fully automated production line for manufacturing prefabricated wall panels made of lightweight concrete blocks. Year of manufacture: 2021 The line consists of: Unpacking and block feeder Layer formation with lateral pushers Mortar mixer and application system Storage and buffer zone for finished wall panels Final inspection and palletizing of the prefabricated components Block dimensions: 15 - 36.5 cm Output: approx. 400 - 480 m² / 8 hours Wall length: max. 6.5 m / min. 1.5 m Wall height: max. 3.5 m / min. 4 blocks Knsdpfx Akeziwplj Asa The line is available immediately. Location: Germany.

Condition: like new (used), Year of construction: 2017, operating hours: 80 h, functionality: fully functional, machine/vehicle number: 2014.15.P1272 PCCB.98.F, type of input current: three-phase, input voltage: 400 V, type of cooling: air, welding power (max.): 13 kVA, open-circuit voltage: 86 V, welding current at 100% duty cycle: 220 A, protection type (IP code): IP21, welding current (max.): 300 A, input frequency: 50 Hz, continuous power (apparent): 9 kVA, Equipment: type plate available, We offer a practically new, lightly used welding machine (80 hours of operation). PRICE NET FOR the power source 300 CA + splitter for 2 welding heads + trolley with cooler. (First 12 photos) Prices for other equipment, welding heads, etc., available upon request. Orbitalum ORBITAMAT 300 CA AC-DC Orbitalum 300 CA (cooler included), Splitter for operating 2 welding heads, ORBICAL S trolley, year of manufacture for the above-mentioned equipment: 2017, Remote control included for working at height, which improves operation with the welding heads. (Rated supply voltage: 3×400 V Frequency: 50/60 Hz Welding current at 40% duty cycle: 300 A Welding current at 100% duty cycle: 220 A Open-circuit voltage (U0): 86 V Arc voltage at 100% duty cycle (U2): 22 V Arc voltage at 40% duty cycle (U2): 18 V Apparent power S1 (100%): 9.0 kVA Apparent power S1 (60%): 13.5 kVA Protection class: IP21 Insulation class: F Cooling: AF Ksdpfszclw Esx Ak Asna Standard: EN 60974-1) Included (possibility of selling individual items) Welding head, manufacturer: Orbitalum, type/model: TP 600 KD, serial no.: 717, year of manufacture: 2018, diameter: 70 – 170 mm + ground cable. Welding head, manufacturer: Orbitalum, type/model: OW 19, serial no.: 1316, year of manufacture: 2017, diameter: 3 – 19 mm - NEW - unused, as shown in the photo. Set of plugs, manufacturer: Orbitalum, type/model: Orbipurge 12-110 - 2 sets or more. We have many more items from ORBITALUM, most of which are practically new, from a company liquidation in Poland. Closed welding heads 115, 76, 19, plus aluminum inserts, facing machines 8.6 and 2.5, orbital saw GFX 3.0, tripods, gas control devices Cloops CPSC 185, articulated videoscope 7.5 m IRIS 46-75 DVRX, all at attractive prices, VAT invoice available. Significant discounts for larger purchases. Equipment can be inspected in person in Rzeszów, Podkarpackie region. Shipping is possible throughout Europe. If you have any questions or need additional information, please send a message or contact us by phone (Polish - English).

Condition: excellent (used), Technical condition: very good Visual appearance: very good Please contact Ferdinand Pater for more information Knodpfxst Hty Ue Ak Asa

Condition: new, Roller splitter RGS20 Motor power 7.5kW Cutting force 20 tons Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm Machine weight approx. 2500kg Tank capacity approx. 100 liters -Body color RAL according to customer requirements Protective grille/blade bar RAL 1028 melon yellow Knedpfxoq A Turs Ak Aoa Ordered goods Price and further information on request

Condition: new, Roll splitter for shredding waste rolls of paper and film - motor power 9kW - PLC-based control, two-hand safety circuit D2h9jg7 - Cutting force 35to - Splitting table straight version - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm - Machine weight approx. 4 tons -Color RAL 5012 - light blue - Hand protection grille in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Stock item - immediately available Knedpjtvgzbefx Ak Aoa

Year of construction: 2026, condition: new, - Motor output: 7.5 kW - Cutting force: 25 tons - Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 800 mm - Machine weight: approx. 3000 kg - Tank capacity: approx. 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Straight-type splitting table - Documentation: 2 copies in German (1x printed, 1x CD) - Color: RAL 5012 - light blue - Protective grille/knife bar: RAL 1028 - melon yellow Ksdpsd Tfzdjfx Ak Aona Machine in stock - immediately available Price and further information upon request.

Condition: new, - Motor power 7.5 kW - Cutting force 20 tons Cutting channel designed for: - max. roll length 1100 mm - max. roll diameter 900 mm - Machine weight approx. 2500 kg - Tank capacity approx. 100 liters - Hand protection guard in the area of the control panel and opposite - Color scheme: Housing RAL according to customer requirements Protective guard/knife bar RAL 1028 melon yellow Ksdpfx Ajftnt Njk Ajna Made to order Price and further information on request.

Condition: new, For slitting and shredding wound paper, cardboard, or plastic rolls onto cores. - Motor power: 7.5 kW / 32 Amps / 5-pole – 50 Hz – 3-phase - Control: PLC-supported, with two-hand safety circuit Kjdpef S Ir Ujfx Ak Ajna - Cutting force: 30 tons - Cutting speed: 17.3 mm/sec Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 1200 mm - Machine weight: approx. 3000 kg - Color: RAL 5012 – light blue Further information and price upon request. Made to order.

Condition: new, - Motor power: 15 kW - Control system: PLC-based, with two-hand safety circuit - Cutting force: 50 tons - No-load speed: approx. 22.3 mm/sec - Splitting table: straight design - Cutting channel: - Max. length: approx. 3000 mm - Max. opening: approx. 1250 mm - Machine weight: approx. 4.8 tons Knjdpofbx Nbsfx Ak Aja Made to order. Price and further information available upon request.

Condition: new, Year of construction: 2026, - Motor power: 7.5 kW - Cutting force: 25 tons Cutting channel designed for: - max. roll length: 1,500 mm - max. roll diameter: 800 mm - Machine weight: approx. 3,000 kg Ksdpfx Akstvmw Ds Aena - Tank capacity: approx. 110 liters - Hand protection grille at the operator control panel and opposite side - Splitting table, straight design - Documentation: 2 copies in German (1x text format, 1x CD) - Color: RAL 5012 – light blue Protection grille/knife beam: RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: new, - Motor power: 9 kW - Control system: PLC-based, with two-hand safety circuit - Cutting force: 35 tons - Splitting table: straight design Kedpfx Akogl Ac Sj Aona - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm - Machine weight: approx. 4 tons - Color: RAL 5012 – light blue - Hand protection guard in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request.

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit - Cutting force 35to - Splitting table straight design - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm Knjdpfx Aotvm A Tjk Aoa Bednmofn0d - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Ordered goods Price and further information on request

Condition: new, Year of construction: 2026, Motor power: 7.5 kW - Cutting force: 30 tons Cutting channel designed for: - Max. roll length: 1500 mm - Max. roll diameter: 850 mm - Machine weight: approx. 3500 kg - Tank capacity: approx. 110 liters - Hand protection grid in the area of the control panel and on the opposite side - Knife locking mechanism - Straight splitting table design - Documentation: 2 copies in German (1 printed, 1 on CD) Kodpfjgl Adzsx Ak Aona - Color: RAL 5012 - light blue - Protective grid/knife beam: RAL 1028 - melon yellow Machine in stock and immediately available Price and further information upon request.

Condition: good (used), functionality: fully functional, Roll slitter type RGS50 - used Condition: good For slitting and shredding wound paper, cardboard, or plastic rolls onto a cardboard core - Motor power: 15 kW / double pump, 32 amps / 5-pole – 50 Hz, 3-phase - Control: PLC-supported, with two-hand safety circuit - Cutting force: 2 x 25 tons - Blade length: 2500 mm - Max. opening: 1600 mm With roll loading stand for increased work height and single-sided roll discharge - roll discharge height approx. 1200 mm Knjdpfeyn Aghsx Ak Asa Machine has been factory-tested and partially overhauled, ready for immediate use.

Condition: used, Year of construction: 2009, operating hours: 550 h, functionality: limited functionality, machine/vehicle number: 041, Bridge saw for marble and granite, with rotating and tilting table, new steel foundations for the bridge and table are available. Dimensions: 560 cm long, 460 cm wide, 300 cm high Weight approx. 6160 kg, disc motor inverter, work table with motor drive and tilt adjustment, linear shaping system, Knedpfx Ajzim Dlsk Aoa disc tilt for bevel cutting.

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Knodpfx Akewcl Ulj Asa Height: 2270 mm Weight: 150 kg IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Technical information • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Knedsh Uhq Dspfx Ak Aoa Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one of the plate edges Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Knedpfsvbdyxsx Ak Aoa Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, XYLOG 800 – The professional log sawing and splitting machine for industrial firewood production The Rabaud XYLOG 800 is the powerful solution for anyone who wants to efficiently and economically produce large quantities of high-quality firewood. As a stationary sawing and splitting machine, it processes logs up to 800 mm in diameter with impressive speed and precision – ideal for forestry operations, timber traders, and commercial firewood producers. Your advantages at a glance: • Highest capacity: Up to 800 mm log diameter – perfect for thick hardwoods such as oak, beech, or ash. • Flexible cutting system: Optional with SUPERCUT chainsaw bar (113 cm, automatic tensioning & lubrication). • Adjustable log length: From 25 to 50 cm – hydraulically adjustable with automatic retraction for maximum efficiency. • Powerful splitter: 16 tons of splitting force with ISO POWER (automatic, continuously variable speed control) and two independent splitting knives. • Safe and precise feeding: 3 independent log clamps, chain feed table (up to 8 m usable length), and V-shaped conveyor belts for safe transport even with crooked or short logs. • High productivity: Saws from bottom to top – saves time with smaller diameters and minimizes waste wood. The XYLOG 800 combines sawing and splitting in a robust, low-maintenance system. It is specifically designed for continuous industrial use and impresses with its durability, low operating costs, and excellent log quality. Perfect for: • Professional firewood production • Forestry companies with high throughput • Wood processors who value uniform, sales-ready logs Significantly increase your productivity – with the Rabaud XYLOG 800, you produce more firewood in less time, with less effort, and higher quality. Knjdpozgwfhsfx Ak Aja Request a non-binding offer or a demonstration now! The XYLOG 800 – Powerful performance for strong wood.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, We offer for sale a modern PRINZ ECOSTAR chain package cross-cut saw, designed for efficient and precise cutting of timber packages and large wooden elements. This is a high-quality Austrian machine (year 2025) suitable for industrial use both indoors and outdoors. Key Features & Benefits Manufacturer: PRINZ GmbH (Austria) Kjdpfx Akszgtt Ij Asna Model: ECOSTAR Year of manufacture: 04 / 2025 Designed for cutting timber packages and solid wood Robust and mobile design Suitable for indoor and outdoor applications High precision and reliable performance Electrical System Operating voltage: 400 V (3-phase) Frequency: 50 Hz Connected load: approx. 7.5 kW Fuse protection: 32 A Protection class: IP55 Drive & Performance Main motor power: approx. 7.5 kW Speed: approx. 1,400 – 2,900 rpm (depending on configuration) Rated motor current: approx. 13.6 A Cutting System Chain saw cutting unit (bar-type system) Guide bar length: 2,500 mm Integrated lubrication system with oil tank Automatic oil pump lubrication General Data Machine weight: approx. 170 – 180 kg Noise level: approx. Idle: ~94 dB Operation: ~95–96 dB Operating Conditions Ambient temperature: +5 °C to +35 °C Suitable surface: firm, level, dry ground Designed for mobile use (rubberized chassis/wheels) Condition & Equipment Condition: Very good / almost new Modern machine (2025) Fully functional and ready for operation Applications Cutting of timber packages Cross-cutting of beams and logs Wood industry, sawmills, timber yards Advantages Mobile and flexible use High cutting accuracy Robust industrial design Easy operation and maintenance Reliable Austrian manufacturing quality

Condition: used, functionality: fully functional, color: orange, Year of construction: 2003, Paving machine in good condition (fully functional), 2003 Kedsy Ufgfopfx Ak Ajna €50,000

Condition: new, Year of construction: 2026, Yanigav Log Splitter FBA26 • Weight: 350 kg Knodpfxsr D Nhfe Ak Aja • Dimensions (LxWxH): 1.0 x 2.0 x 0.9 m (working width: 2.9 m) • Force: 26 t • Drive: hydraulic pump • Log length: up to 110 cm • Log diameter: min. 30 cm • Wedge length: 38 cm

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis Kjdpfsr Eznijx Ak Aena • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included

Condition: excellent (used), functionality: fully functional, overall weight: 3,300 kg, Year of construction: 2010, Model: GVZ 3000-D-S Opening width: approx. 2.60 m incl. CW55 adapter plate (e.g. for CAT 345) Kodpfxetgpg Ie Ak Ajna