Used Stromab Tr 450 for sale (60)

Condition: like new (used), Year of construction: 2016, I sell the pneumatic end cutting saw Stromab TR350, year 2016. Motor power 4,0kW Saw blade diameter fi.350x30mm Cutting schema ver.1 max. 210x30mm Cpjdpfjrzu Ugsx Afnju Cutting schema ver.2 max. 150x80mm Input table 1,00m (possible to enlarge) Outut table 1,00m (possible to enlarge) Fence for stoppers 2,00m total length Available immediately. Condition like new. Weight 150kg.

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Csdpshw Ng Isfx Afnepu Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: used, Stromab TR350 chop saw IDC000098 - complete with filter Cpedsu Dhziopfx Afnou - with roller conveyors

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen chalk line cutting working according to program 1 pcs pusher for cut off pieces hydraulic saw blade movement machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm work piece feeder system with toothed belt feed speed 120 m/ min cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Cododify Iopfx Afnjpu Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: Csdpfx Ajulzchefnepu - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Stromab Mitre Saw for Boards up to 250 mm, Height 100 mm Cpedpfxsrnbnko Afnsu

Condition: new, Year of construction: 2022, New machine Cpedpekwhb Hofx Afnou Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and blockboards • Compact footprint with front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment—practical and functional • Vertically adjustable columns with frame pressing device Technical data: Working surface(s): 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of hydraulic cylinders with manual adjustment: 1500 kg Installation dimensions approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice

Condition: used, Technical data: Max saw diameter: 600 mm Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm Cedpfx Asri Si Djfnspu 2 pneumatic clamps Extraction spigot diameter: 155 mm Work table dimension: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 145 mm, cutting width (max.): 510 mm, overall weight: 400 kg, extraction nozzle diameter: 150 mm, rotational speed (min.): 2,800 rpm, power: 5.5 kW (7.48 HP), STROMAB PS 50/F pendulum cross-cut saw, brand NEW Cpjdjrdwm Tepfx Afnou Specification: • condition - new • engine power - 5.5 kW • blade diameter - 500 mm • engine shaft diameter - 30 mm • engine speed - 2,800 rpm • max cutting width - 510 mm • max cutting height - 145 mm • additional extension tables - 2 x 2 m • weight 400 kg • 2024/2025 year of manufacture • noise emission - 85.5 dB (A) • the machine meets CE standards Additional information: • tables visible in the photos included with the machine (2 x 2.0 m) • available within 7-10 working days • the price does not include VAT and transport costs

Condition: good (used), Year of construction: 2005, saw blade diameter: 800 mm, overall weight: 2,960 kg, 15 kW; 400 V; Cpjdpfx Afoygk Haoneu

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Power supply: 400 V Blade diameter: Ø 600 mm Machine weight: 1820 kg Year of manufacture: 2006 Type: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Max. cutting width: approx. 410 mm Minimum workpiece size: 20 × 10 mm Positioning accuracy: ±0.4 mm Csdpjx Nnd Aefx Afnepu Cycle time: approx. 4 seconds per cut Working height: 1000 mm Chip extraction connections: Ø 100 mm Beckhoff control with 12-inch touchscreen (Windows interface), 3D element visualization, cutting list import via USB/Ethernet.

Year of construction: 2000, condition: ready for operation (used), A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Cpodpfsyb Scljx Afneu

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Technical Description: • Working capacity: 2100 x 1000 mm • No. 2 working stations • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz • Standards: CE compliant Cpodpfjxg I Sljx Afnou • Electrical supply: 400 V – three-phase

Condition: good (used), Year of construction: 2018, functionality: fully functional, Data on the nameplate Cpodpsyahlgofx Afnou

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed Cpsdsrx Tatepfx Afnsu - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4500x1200x1200 mm Weight 1500 kg Total power requirement 8 kw Cedpfxjvz Hz Eo Afnepu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Cjdpovz Eq Ssfx Afnjpu Weight 0 kg Total power requirement 0 kw

Condition: used, Year of construction: 1990, total width: 1,100 mm, total length: 3,400 mm, total height: 2,450 mm, - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 90002 - Main motor power [kW]: 0.7 - Press drive: Hydraulic - Max. clamping width [mm]: 2900 - Max. clamping height [mm]: 2000 - Number of cylinders [pcs]: 5 - Options: Horizontal/vertical cylinders separately controlled - Transport dimensions: 3400mm x 1100mm x 2450mm (l x w x h) - Transport packages [pcs.]: 1 Cpedpfx Afewxr Nusnou Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, functionality: fully functional, Cutting fixed lengths according to cut lists and cutting out defective sections Cutting cycle: Defect trimming via chalk marking Cutting to fixed lengths, standard and sequential cutting, sequential cutting in marking mode. Infeed material: variable lengths with single piece loading WS.1 Through-feed crosscut saw 4 pcs. lower feed rollers 1 pc. loading table, 2 meters, right side, with dual marking table 1 pc. outfeed table, 1 meter, with rear stop Roller height adjustable manually 12 pcs. luminescent chalk sticks Cutting capacity: Position A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Cpsdpfx Aex Da Tvofnou Position B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control system with: 7" color touchscreen Editing of cutting cycles directly on the machine Programming options: - Defect trimming via marking - Operation with cut list consisting of 10 dimensions; repeat option for each dimension; total number of pieces for each dimension 100 storage slots for cut lists Detection system for the last two pieces to be cut and the following piece Electronic control of sorting unit with No.1 ejection kicker (ejection kicker optional) Technical specifications: Feed system adjustable by motor, brushless and with toothed belt Feed speed 100 m/min Cutting accuracy +/- 0.8 mm TCT blade diameter 500 mm Motor power 7.5 kW Cutting cycles per minute up to No. 100 Minimum workpiece length 550 mm Minimum workpiece width 40 mm Minimum workpiece thickness 15 mm On request: ZA295 Additional loading table with dual marking table ZA110 Outfeed table ZA058 TCT saw blade Ø 500 mm ZA296 Motorized adjustment of roller height

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Min. saw blade diameter: 790 mm Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Infeed table length: 700 mm Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Weight: 2,960 kg Cjdpfsxq Au Asx Afnspu EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2018, Stromab CT600 circular saw with 6 m infeed table. Csdexzu U Aopfx Afnjpu

Condition: good (used), Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with saw table sliding and repeted cut mm 200 x 760 Maximum ripping height mm 300 Cutting precision : +/- 2 mm on 10 mt beam (straight beam ) - +/-0,2° on rotation edge of the table - +/-0,2° on inclination angle of the blade Control by industry-standard PC Touch- Screen - Windows Operating System - USB ports - Ethernet Rollers: : Codpfx Aorzqy Nsfnepu n° 4 idle rollers benches mt. 2 with rollers diameter 133 mm Widia blade diameter 800 mm Compressed air 6/7 bar Overall dimensions of mounted machine with roller conveyors: mm 7000 x 2600 x 2200 h Machine weight kg 2900 Total weight kg 3400 (Machine + roller benches)

Condition: used, Year of construction: 2022, Heavy duty rack and pinion push feed system 6000 mm in feed capacity Cpjdsw Tar Eopfx Afneu Ø600 saw blade 10 hp saw motor Automatic angle setting (+70 - 70 degrees ) Vertical Clamping Horizontal clamping Electrically interlocked safety hood Touch screen controller 12" colour display Full optimisation 1000 mm out feed table

Condition: like new (used), Year of construction: 2023, 350mm max saw diameter 890mm crosscut capacity 95mm max depth of cut 4hp motor Swivelling and canting facility with fixed locking at 45 degrees Cpjdjwl Hxdspfx Afnou Spring return for saw unit MDF table Year - 2023 CE Condition - Never been installed. Condition almost as new

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 Cpodpfx Ajwl Hyuefnju At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE