Used Stud Welding Unit for sale (35,458)

Condition: used, Price: On request - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ijdpfx Acoxw Eb Sj Eoii Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, mileage: 408,412 km, power: 338 kW (459.55 HP), first registration: 06/2022, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Iisdpoxwx Rtjfx Ac Eoi Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Condition: used, machine/vehicle number: YS2R6X2000537xxxx, mileage: 860,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21746 Specifications: EU-approved until 31.03.2026 Model year: 2015 Mileage: approx. 860,000 km Full air suspension Hydraulics, 140 L tank Euro 6 Length: 678 cm Width: 255 cm Wheelbase: 310/132 cm Curb weight: 9540 kg Drive: 6x2 Power: 581 hp Dual pedal sets Roof-mounted spotlights 2x rotating beacons Sleeper bed Coffee maker Radio/CD Air conditioning Remarks: Right-side step is damaged Cylinder head gasket needs replacement Km: 860000 HK: 580 Technical approved: Yes EU-approved until: 31.03.2026 Own weight: 9540 Total Weight: 28000 Payload: 18460 Width: 255 Length: 678 Euro: 6 Model: R580 6x2 Trekkvogn m/ hydraulikk Iijdpjxvlbpefx Ac Eoi

Condition: excellent (used), functionality: fully functional, input voltage: 220 V, year of last overhaul: 2025, total height: 220 mm, total length: 420 mm, total width: 380 mm, type of input current: AC, input current: 10 A, Tempering device, benchtop unit Model: TG 05-2 W Containers approx. 2 x 4 liters Iiodpfxet A Abyo Ac Eei Stainless steel construction Electronic temperature control Connection: 230V Dimensions: 380 x 420 x 220 mm (W x D x H) Used unit, cleaned More devices in stock!

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve Iedpfx Acoqcuvws Eeii When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, machine/vehicle number: YS2G6X2000209xxxx, mileage: 853,000 km, Year of construction: 2013, Please contact ATS Norway for more information Please provide reference number upon request: 21770 Specifications: Model year: 2013 Mileage: approx. 853,000 km Automatic transmission Tires (see photos) Tipping hydraulics Euro 5 Length: 680 cm Width: 255 cm Wheelbase: 310/131 cm Curb weight: 8,300 kg 6x2 480 hp Sleeper bed Radio/CD Air conditioning (AC) Description:Scania G480 tractor unit with tipping hydraulics.The truck is not EU-approved, so some maintenance or repairs should be expected.Available for quick delivery. Iiedpfoxvlbcox Ac Eoi Km: 853000 HK: 480 Technical approved: no EU-approved until: 30.04.2025 Own weight: 8300 Total Weight: 27000 Payload: 18625 Width: 255 Length: 680 Euro: 5 Model: G480 6x2 Trekkvogn m/ tipp hydraulikk Gearbox: Automatic

Condition: excellent (used), Here we offer a KUKA robot with control unit. KUKA robot VKR 16 R1610-2 Control unit VKRC4-SC5 KUKA smartPAD hand-held programming device Robot comes from school and Research Department Hour meter first. 226,25 Axis data: Range of motion A1 ±185 ° A2 185 ° / 65 ° A3-138 ° / 175 ° A4 ±350 ° A5 ±130 ° A6 ±350 ° Iedpfjd H E H Rjx Ac Eeii Speed at nominal load A1 200 ° / sec A2 175 ° / s A3 190 ° / s A4 430 ° / s A5 430 ° / s A6 630 ° / s Technical data: Maximum range 1612 mm Maximum load 20 kg Nominal payload 16 kg Nominal payload carousel / arm / arm 0 kg / 0 kg / 10 kg Repeatability (ISO 9283) ± 0.04 mm Number of axes 6 Installation location ground; Ceiling; Wall; any angle Footprint 430.5 mm x 370 mm Weight 245 kg Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you.

Condition: excellent (used), Here we offer you an industrial robot. Max. Load capacity: 6 kg Type: RX90 Control unit RX90 - CS7 approx. weight 360kg condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Iiedpfx Aefb T Iijc Eji We can answer further questions for you on the phone.

Condition: excellent (used), Here we offer you a control unit. Iiedopgul Eepfx Ac Esi Control unit for RIVSET self-pierce riveting system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was for inspection at the manufacturer and is functional. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. The work area with the welding station, the tool (on the rotary table) and the hold-down device for the product is located in the middle section of the machine frame. The control cabinet is installed at the rear. The welding station is protected against the insertion/removal area by a laser-tight cover. The welding laser (the laser supply) is switched off when a maintenance door is opened. The welding parts are loaded and removed manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding various plastic parts (front frame). For components measuring approx. 460 x 280 mm Basic data Equipment of the machine: 1 complete machine frame with cladding, substructure and protective devices, painted Adjustable machine feet, designed for transportation with forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with guard door switch with guard locking. 4 manual maintenance doors underneath the machine table. The control cabinet is permanently installed at the rear of the machine Laser system Fab. IPG 1 fiber laser 300 Wcw, at the fiber end, 1070 nm completely air-cooled. 1 power supply unit for laser unit, target beam laser and glass fiber 1 Vario-Scan for 3D welding contour 1 scanner - 20 aperture Optics, F-Teta lens, focal length determines processing field and processing distance 2x basic tool Tool coding with transponder Hold-down/clamping system for holding a mask with absolute path measuring system With pneumatic clamping system for path-controlled pressing of one welding part at a time Pneumatic air shower to protect the lens body Microbox PC427B incl. RTX (Siemens) Pre-installed Siemens S7 software PLC Profibus, Profinet, Ehternet, RS232 interface 15" touch panel for operating and entering data/parameters Machine lighting Connection flange for on-site fume cupboard Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly bolted to the machine frame Iisdpoqay Uvefx Ac Eji Space requirement BF x DF: 5400 x 5400mm Technical Data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Back-up fuse: 16A Exhaust air: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: second-hand / used (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a KEBA ABB IRC5 SX Teach Pendant Unit-2 16/64. Teach pendant for ABB robots 3HAC023195-001 /03 Ijdjq D A Nmepfx Ac Ejii Type: SX Teach Pendant Unit-2 16/64 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Votan Type: Jenoptik Votan W4 Votan Jenoptik modular laser welding system Votan Jenoptik laser machine Votan W modular laser welding system Iiedpfxshr Dlie Ac Esi Laser welding allows you to connect plastic parts precisely, energy-efficiently and quickly. This creates strong and resilient welds that are free of marks on the visible side. This means that plastic welding using laser technology also meets the highest aesthetic demands. Nominal voltage/frequency: 3x 400 V / N / PE / 50 Hz Control voltage: 24 V DC Max. current: 20 A Main fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Iiedpfxon Armao Ac Eei Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm / 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Maximum Position Resolution: 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min warmup): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing, with varioSCAN): (433 x 268 x 266) mm³ Beam Offset: 72.72 mm Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Ijdpfx Asxp Iw Hoc Esii Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (upon arrangement) or local pickup possible. Feel free to contact us by phone for further questions.

Condition: excellent (used), Tucker Nimak MF180: Robot welding guns for single-sided resistance spot welding The robotic welding guns for single-sided resistance spot welding from NIMAK work with state-of-the-art medium-frequency transformers, Iiodpfx Aorqfk Aoc Eji a control unit with adaptive welding current control and finely adjustable welding cylinders for gentle power. The right amount is needed to reliably join materials without deforming them or leaving marks on the visible side. or leaving marks on the visible side. Our systems master this task perfectly. Tucker Stanley C-clamp self-pierce riveting tool With Tucker® SPR equipment, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel and high-strength steel, by combining two technologies in one modular system: Self-pierce riveting with semi-tubular rivets and solid self-pierce riveting. AEG SVS Schweisstechnik Electrode milling unit EF310-01E-S-D-Fix Milling of spot welding electrodes Automatic rivet feed With controller: The brain of every SPR system. It manages, thinks, remembers and communicates in an Industry 4.0 environment The lung - Small, quiet and fast rivet feeder for your SPR tool. Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Zwick Type: Z20 Technical Specifications: Stroke: 200 mm H x W x D 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Clip-On Extensometer 13.5 mm MFA 25 Extensometer (Temperature range up to +200°C) Computer + Software testXpert II V3.5 Air Conditioning Unit: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Temperature change: 1 K/min Refrigerant R404 5 kg Condition: Used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to change or errors in the technical data. Information is subject to change.) Subject to change without notice!) We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax. Iedpfx Acev Rdtws Esii

Condition: good (used), Here we offer an Indramat main spindle unit. Indramat RAC 2.2-250-380-A01-W1 main spindle unit Type: 2.2-250-380-A01-W1 Scope of delivery: (See image) 2 weeks commissioning guarantee The unit comes from a Commons resolution. Iiodpfoda Itlsx Ac Eoi We provide also with express shipping / express shipping (DHL, UPS, TNT) We can answer questions on the phone for you. Written order possible by email or fax

Condition: excellent (used), Here we offer a Bosch swivel arm robot SCARA SR8 with control unit. Bosch swivel arm robot SCARA SR8 Control unit Type: SCARA SR8 Condition: pre-owned / used Scope of delivery: (See image) Iiedpfxjdyaibo Ac Eei (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: good (used), Here we offer robots a Stäubli. Stäubli robots with control unit and Control Panel The Staubli RX130 is a fast and accurate means of payload robot (12 kg) that a max range of 1360 mm has arm. It is suitable for machine operation, painting, clean room, life sciences and Pharma. The RX130 is equipped with the CS7 controller and has an articulated arm with 6 degrees of freedom robot for maximum flexibility. The spherical working range of the robot allows optimized use of the robotic cell. It can be installed either on the floor or ceiling. The 6-axes RX130 offers a high resolution of servo with absolute calibration and a completely closed structure, ideal for applications in harsh environments. 3X400V-50/60Hz-5500VA Weight 260kg Type: Stäubli CS7 RX130 Iedpfxjd Dy H Ts Ac Eeii Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: good (used), Autotherm Type: Temperature control unit Autotherm AW 95-12/VK/E Temperature control unit Autotherm AW95-12_VK for water / glycol temperature control (refurbished) Autotherm AW temperature control unit: For high-precision temperature control of water Temperature control units from autotherm are used in various areas of industry, research and laboratory applications. Temperature control units supply, for example, tools, open baths, double-walled containers, heat exchangers and heating chambers with tempered water, to keep them at the desired temperature with high precision. Areas of application: Mechanical engineering, e.g. solar and wind power industry, textile industry Plastics processing Chemicals and pharmaceuticals paper production medical technology Food industry Isdpfxjuigrzs Ac Eeii Research and development Temperature control unit Autotherm AKW AW95-12/VK Temperature range RT°C / +95°C Heating capacity 12.0 KW Cooling capacity 18.0 KW Passive cooling system via heat exchanger / connection to cooling water network required Nominal output 14.5 KW Dimensions 600mm x 840 mm x 910mm Power consumption: 400Volt/ 50 Hz 13400 Watt 19,6 A 5,1 bar Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Type: Erichsen 606/1000L For sale is a high-quality Erichsen 606/1000L corrosion test chamber. This unit is ideal for performing salt spray and condensation tests to evaluate the corrosion resistance of coatings, metals, and surface materials. Standards & Application Areas: Suitable for testing according to DIN EN ISO 6270-2, DIN 50958, ISO 11503, ASTM D2247, BS 3900 Part F2, and ISO 9227. Perfect for quality control, research & development in the automotive, coatings, and metal industries. Technical Data: Test chamber volume: 1000 l Capacity: approx. 180 test samples Test temperature range: Ambient temperature up to +50 °C Power supply: 400 V / 3~ / 50 Hz Power consumption: approx. 4,320 VA Air connection: 4–10 bar, approx. 15 l/min at 6 bar Water connection: 2–6 bar Iisdpfx Acsxdcqwj Eei Dimensions (W×D×H): approx. 1,820 × 1,000 × 1,900 mm Weight: approx. 150 kg Condition: used Scope of delivery: (see photo) Test chamber (1000 l) Controller with touchscreen operation Dosing unit for spray solution Air circulation pump (Specifications are subject to change and possible errors!) For any further questions, please feel free to contact us by phone.

Condition: excellent (used), Kuka Type: KR 60 3 C2 FLR ZH02 Kuka robot with KTL measuring probe 69-186-130 100/90 KRC2 Number of axes: 6 Maximum load of the robot: 60 kg Maximum reach: 2230 mm Repeatability: ± 0.06 mm Control system: KR C2 Weight approx. 665 kg Robot movement speed Axis 1: 128 °/s Axis 2: 102 °/s Axis 3: 128 °/s Axis 4: 260 °/s Axis 5: 245 °/s Axis 6: 322 °/s Axis range (in º) Axis 1: ±185 ° Axis 2: -135 ° / 35 ° Axis 3: -120 ° / 158 ° Axis 4: ±350 ° Axis 5: ±119 ° Axis 6: ±350 ° Isdpstqu Egjfx Ac Ejii Control unit KR C2 Kuka control unit KRC2 ed05 with KCP2 Control Panel Teach Pendant Control unit KRC2 Supply voltage : 3X400V Mains frequency : 50/60 Hz Full load current : 32A Mains fuse : 25A Weight : 316kg Handheld control unit: Type: Kuka smartPAD Display: scratch-resistant, industrial-grade touch display Display size: 8.4" Dimensions (W x H x D): 240 x 290 x 50mm Weight: 1100 kg This robot is a training robot from a university project It was not previously in industrial use! Condition: very good condition with few operating hours Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Iiedpfsht U Snox Ac Eoi Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: excellent (used), Bitzer Here we offer you a refrigeration unit. Was built but never used Starting current (rotor blocked) 135/220 A Supply voltage 400/3/50 V/Ph/Hz max. operating current 53 A max. power consumption 30.1 kW delivery volume: 101.10 m³/h (HD) 50,50 m³/h (MD) Motor (nominal): 30 HP 22 kW Oil filling BSE32 Option: BSE55 at R134a, tc > 70°C Oil quantity 4,75 l Refrigerant R452A Reverse osmosis filter and humidification system included Reverse oasmosis data: Permalefficiency 10 l/h Feed water requirement 40 l/h Operating pressure 14 bar Dimension: 500*600*295 mm H*W*D Type: BS6 S6F-30.2Y-40P + Bitzer condenser water cooled K573H + RO20 Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Iedpfx Ajhwmtvec Eeii Further questions we can answer on the phone for you.

Condition: excellent (used), Stäubli robot RX 60B LCR with control unit and manual control unit Here we offer a Stäubli robot RX 60B with control unit. Robot: Stäubli robot RX 60B LCR Lifting weight (nominal batch - kg) 2,5 kg Weight 46 kg Type: RX60B LCR / F04/50R7E1/A/01 Control unit: Stäubli CS8 RX60B LCR 3X400V-50/60 Hz-3000VA Weight 170 kg Type: CS8 RX60BLCR / F06/546XA1/C/01 Manual control unit: Stäubli SP1 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Iiodpoft Sc Iofx Ac Eei We can answer further questions for you on the phone.