Used Support Ribbon Magnet for sale (14,715)

Condition: excellent (used), Hydraulic cylinder, support cylinder -Piston diameter: approx. 130 mm -Piston rod: 100 mm -Stroke: approx. 700 mm -with support rollers Ksdpfxsb A Hvls Anysdn -each cylinder with hand pump -Number: 3 cylinders available -Price: per piece

Condition: used, Used stainless steel horizontal ribbon blender by WAM GROUP S.p.A. (Italy) model WNHO2400E/0DK. Total capacity of the mixer is 2400 litres. Working capacity is approximately 1500-1700 litres. Stainless steel mixing chamber has internal dimensions of 1210 mm wide x 2000 mm length and is equipped with an inspection door located on the side wall measuring 1200 mm width x 450 mm height. Mixer has interrupted double counter-pitch ribbon screw which is made of magnetic non corrosive steel (ferritic steel). Agitator is driven by gearbox and belts by electric motor with power 18,5 kW, 1470 rpm, 50 Hz. Working rotation speed of shaft is approximately 29 rpm. Unit has central bottom discharge with dimension: width 175 mm x length 250 mm, equipped with pneumatically operated valve. Top cover of the mixer is made of stainless steel and is equipped with a central connection with a diameter of 390 mm. Specifications: Kjdozbucnopfx Anyedn Capacity: 2,400 L Material of construction: Stainless steel and magnetic non corrosive steel (ferritic steel) Width: 1,210 mm Horsepower: 18.5 kW Length: 2,000 mm Jacket: No Discharge Type: On bottom pneumatically operated valve Type Of Ribbon: Interrupted double counter-pitch ribbon screw Revolutions Per Minute: 29

Condition: used, Equalising block for low-bed semi-trailer Dimensions – see photos ##### PLEASE CALL – NO EMAILS! Kdsdpszffydsfx Anyjn #####

Condition: used, Goudsmit metal separator with rotating magnet Kdodpeyykdyofx Anyjn Dimensions: 300 mm x 300 mm x 300 mm Equipped with 8 magnetic bars Motor power: 0.18 kW, 22 rpm

Condition: excellent (used), I offer a professional sine magnetic table from the renowned German company K. JUNG GmbH Göppingen. This device is designed for the precise clamping of parts during grinding, measurement, and tooling operations. Specifications: • Manufacturer: K. JUNG GmbH Göppingen • Type: Sine magnetic table (tilting) Kdedpfx Ansza Hl Esyjn • Magnetic workpiece clamping • Adjustable tilt angle with angular scale • High precision • Robust cast iron construction • Original wooden transport case Included in the set: • Magnetic table • Original wooden case • Documentation and setting table • Clamping elements as shown in the photos • Operating keys Condition: • Used item • Magnetic surface in very good condition • Normal signs of use and storage • Complete set as shown in the photos Ideal for: • Tool grinders • Surface grinders • Tool rooms • Precision workshops • Production and maintenance The item sold is exactly the one shown in the photos.

Condition: good (used), Year of construction: 2009, Manufacturer: NEUHÄUSER Type: 2.224-3 Year: 22/09 Enclosure dimensions: 7270 x 740 x 3400 mm Electrical data: 230/400 V; 380/420V; 11.3-6.5 A; 50Hz; IP54 Discharge height: 3400 mm Delivery length: 6500 mm Shipping width: 640 mm Kdedpenqyx Tsfx Anyjn

Year of construction: 2025, condition: new, Magnetic table, 60 kg/square meter, 18x18 milling pattern, for milling machines Kodpfx Aszd Rlvonyjdn Magnetic clamping plate 200x300x80mm, 60 kg/square meter, 18x18 pattern: 470 EUR Magnetic clamping plate 200x400x80mm, 60 kg/square meter, 18x18 pattern: 660 EUR Magnetic clamping plate 300x400x80mm, 60 kg/square meter, 18x18 pattern: 800 EUR Magnetic clamping plate 300x600x80mm, 60 kg/square meter, 18x18 pattern: 1100 EUR Magnetic clamping plate 400x800x80mm, 60 kg/square meter, 18x18 pattern: 1880 EUR Magnetic clamping plate 400x1000x80mm, 60 kg/square meter, 18x18 pattern: 2300 EUR Magnetic clamping plate 500x1000x80mm, 60 kg/square meter, 18x18 pattern: 2800 EUR

Condition: good (used), Internal item no.: 23045 Electromagnetic chuck Manufacturer: Assfalg 600x300x80 mm 110V Kdodpfjlvrmtox Anyjn There is a milled recess on the plate approx. 55 mm wide and 4 mm deep.

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 001-2009, MAPSFERA 1 09 METAL SORTING LINE, consisting of a vibrating feeder, conveyor belt, head magnetic pulley, and eddy current separator, designed for efficient automatic separation and recovery of ferrous and non-ferrous metals in industrial recycling applications. • Manufacturer: MAPSFERA • Model: 1 09 • Configuration: vibrating feeder + conveyor belt + magnetic pulley + eddy current separator • Application: separation of ferrous and non-ferrous metals from mixed waste streams • Status: available for inspection • Current condition: dismantled / stored The system is designed for continuous industrial operation in material recovery and recycling plants, enabling highly efficient metal sorting from mixed input streams. The vibrating feeder ensures a controlled and uniform material flow, while the conveyor system transports the material through the various separation stages. The head magnetic pulley removes ferrous metals, and the eddy current separator allows for the effective separation of non-ferrous metals such as aluminum and copper, improving overall recovery rates and material purity. Kjdpjzbtrzsfx Anyedn

Condition: used, 3700mm long, 960mm high, and adjustable Storage location: Nattheim Kdjdpfxsv Dauqj Anyen

Condition: used, Technical details: Length: 400 mm width: 200 mm height: 150 mm weight of the machine approx.: 63 kg DIRECT CURRENT MAGNET Kdjdpfxju N Dr Ie Anyen Magnet core 8 pieces width x distance: 40 x 45mm *

Condition: used, Technical details: weight of the machine approx.: 8kg kg dimensions L x W x H: Ø 160mmx 85 mm m Origin Germany Weight 10kg Ø 160mm x 90mm Kdjdpfou N Dw Dox Anyon magnetic core 3 pieces, W: 20mm; distance: 36mm *

Condition: used, Technical details: Length: 1000 mm width: 300 mm voltage: 110 V clamping surface area: 1000 x 300 mm current: 2,9 A weight of the machine approx.: 204 kg dimensions L x W x H: 1,2 x 0,3 x plus Gleichrichter m Magnetic plate with rectifier 4pcs induction loops with width 60mm and distance 75mm Kodpfsu N Dy Ssx Anyodn *

Condition: used, Technical details: Kdodpfx Aju N Dmxjnysn weight of the machine approx.: 18 kg kg dimensions L x W x H: Ø 200 x H: 100 m PERMANENT MAGNETIC ROUND PLATES distance between 5x magnetic cores 36mm, width 20mm force operation 8mm square key (not included) *

Condition: used, Year of construction: 1974, Technical details: Kedpfju N D Ntjx Anyedn voltage: 220 V clamping surface area: 630 x 210 mm current: 0,55 A weight of the machine approx.: 84 kg dimensions L x W x H: 0,63 x 0,270 x 0,10 m Magnetic clamping plate 120 watts 13x induction loops, width 20mm spacing 43mm *

Condition: used, Technical details: Length: 400 mm width: 200 mm weight of the machine approx.: 24 kg dimensions L x W x H: 0,4 x 0,22 x 0,08 m MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. Kdedpfx Anou Nklheysn The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm) *

Condition: used, Technical details: Length: 800 mm width: 315 mm voltage: 110 V clamping surface area: 795 x 315 mm current: 1 A Kjdju N D Naopfx Anyedn weight of the machine approx.: 130 kg dimensions L x W x H: 0,85 x 0,35 x 0,09 m Magnetic clamping plate Magnetic strips 18x, width 20mm, distance 40mm *

Condition: used, Year of construction: 1973, Technical details: Length: 300 mm width: 275 mm voltage: 220 / 50 V clamping surface area: 300 x 275 mm current: 15 A weight of the machine approx.: 39 kg dimensions L x W x H: 0,47 x 0,28 x 0,09 m Magnetic plate Kdjdpou Nvrgofx Anyen *

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Kdodpfozc Eayox Anyjn

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Kedpfxoyhzhzo Anyjdn Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Kjdpfxed Dy Ugs Anyjdn Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Kdodpfxsd Dy S Rs Anysn Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Year of construction: 2025, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Ksdpshupkmsfx Anysdn Permanent overbelt magnetic separator TYPE PEM1200 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Kdedpfx Aei Igdfonyjn Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 1,400 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Kdodpfohun Uiex Anyon Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.