Used Swepac Fr 85 for sale (5,083)

Condition: used, Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: RTZ Witte, worm gear motor -Gearbox: RTZ Antriebstechnik/ Varvel Type FRT 85/B3 1/100 IEC80B14 i= 100 -Speed: approx. 14.3 rpm -Engine: WitteType WW 80-4 -Power: 0.55 kW / 1430 rpm Pedpfx Ajt E D Erjhljpw -Protection class: IP55 -Shaft: Ø 32 x 70 mm -Dimensions: 485/210/H320mm -Weight: 22 kg

Condition: ready for operation (used), A Dudik bucket conveyor system with trolley is available. Trolley: Dudik RK2250, Travel drive: Bockwoldt/SEW FR 285 III, Conductor rail: Vahle MKHS, Bucket volume: 2250l. The mechanical drive was renewed in 2013. Documentation available. An on-site inspection is possible. Expected to be available from January 2027. Psdpfxozi Eiys Ahljpw

Condition: refurbished (used), Year of construction: 2017, operating hours: 5,201 h, load capacity: 1,800 kg, lifting height: 3,300 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,170 mm, battery voltage: 48 V, fork length: 1,200 mm, empty load weight: 2,663 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are fully reconditioned in line with FEM-4.004 and current safety standards—delivering maximum quality and safety for your operation. From the chassis to the battery, including drive system, brakes, steering, and electrics—every vehicle undergoes thorough inspection and refurbishment. ? Made in Germany—with responsibility and precision ? Rigorous technical inspection ? 400+ vehicles available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personal support—even after purchase Test on site and get expert advice—we’ll find the right solution for you. Industrial truck data: - Manufacturer: Jungheinrich - Model: Counterbalance forklift EFG 218k - Drive type: Electric - Rated capacity: 1,800 kg - Year of manufacture: 2017 - Operating hours: 5,201 - Lift height: 3,300 mm - Mast type: Duplex - Free lift: Yes - Overall height: 2,170 mm - Fork length: 1,200 mm - Unladen weight: 2,663 kg - Load center: 500 mm - Tyres: Solid rubber - Model type: EFG 218k - Battery type: PzS - Voltage: 48 V - Battery weight: 980 kg Cabin equipment: Solopilot control lever Lighting: 2x front work lights Lighting: 2x rear work lights Pedoy Rq Adepfx Ahlepw Lighting: Rotating beacon Attachment: Sideshift

Condition: used, Year of construction: 2021, FL -3rd hydr. working circuit FL -Damping system DW / Psdpfx Aot H H Uxjhlepw

Condition: used, Year of construction: 2022, FL -3rd Hydr. working group / Pjdpfx Aott Aqiohlopw

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: 2 tank rollers -Load capacity: 3 tons/piece -Support height: 100 mm -Rolls: Ø 83 x 98 mm "Methacrylate" -Submission/Price: complete -Dimensions each: 360/185/H100 mm Ppedpfewxu T Ajx Ahlow -Weight: 12.9 kg/pc.

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, geared motor type HSG5DFR/44D8556A-4 -Speed: 24.5 rpm -Power: 0.09 kW 1350 rpm -Design: B5 -Shaft: Ø 10 x 20 mm Psdeqa I Hvspfx Ahljpw -Protection rating: IP55 -Dimensions: 245/130/H145 mm -Weight: 4.2 kg

Condition: used, mileage: 284,912 km, power: 294 kW (399.73 HP), first registration: 03/2011, fuel type: diesel, tire size: 385/65, axle configuration: 4x4, wheelbase: 4,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 74,800 mm, permissible axle load (axle 1): 30 kg, permissible axle load (axle 2): 70 kg, loading space length: 5,140 mm, loading space width: 2,430 mm, Year of construction: 2011, Equipment: ABS, electric window regulation, power mirror, = Additional options and accessories = - Electrically adjustable seats - Radio CD player Ppjdpezi R H Refx Ahljw = More information = Front axle: Tyre size: 385/65; Max. axle load: 30 kg; Steering; Suspension: leaf suspension Rear axle: Tyre size: 315/80; Double wheels; Max. axle load: 70 kg; Suspension: air suspension Engine capacity: 10.516 cc Empty weight: 9.730 kg Carrying capacity: 9.270 kg GVW: 19.000 kg Max. towing weight: 44.000 kg APK (MOT): tested until 01/2027

Condition: good (used), We are offering for sale a used compensation plate from the manufacturer Polypal. Psdpfsg Siiqsx Ahlopw The scope of delivery includes: 1x compensation plate, used Manufacturer: Polypal Type: SKUP Material color: Sendzimir galvanized Dimensions: approx. 130 x 85 mm Thickness: approx. 1.25 mm Weight/piece: 0.119 kg

Condition: good (used), Technical specifications for the balancing plate: Podpfsi Hkm Ujx Ahlepw Manufacturer: Polypal Included in the scope of delivery: 1x balancing plate, used Overall width: approx. 130 mm Overall depth: approx. 85 mm Material thickness: approx. 1.50 mm Bore hole diameter: approx. 15 mm Number of bore holes: 2 pcs. Weight: approx. 0.12 kg | per piece

Condition: good (used), Technical data for the pallet racking upright: Racking system: Hovuma Included in delivery: 01x Pallet racking upright, used Material color: cream white Profile dimensions: 85 x 50 x 17 x 3.0 mm Profile type: C 808 S275 Podpfx Ahskwdd Eoljpw Includes cross and diagonal braces, Base plates The uprights are pre-assembled (welded frame) 6,640 mm high 870 mm deep

Condition: good (used), We are offering for sale a used rear wall grille holder. The scope of supply includes: 01x Rear wall grille holder, used Material color: Sendzimir galvanized Dimension leg A: approx. 115 x 85 mm Dimension leg B: approx. 50 x 85 mm Distance to rear wall grille: approx. 85 mm Elongated hole dimension: approx. 21 x 10 mm Distance center-to-center of holes: approx. 50 mm Weight/piece: approx. 0.403 kg Pjdpfx Ahogyfxpslspw Shipping costs upon request.

Condition: good (used), FR Korradi milling machine Type: UW1 X-path: 460 mm Y-path: 260 mm Z-path: 320 mm Ppodoq Eh H Uspfx Ahlow Max. speed: 1740 rpm Spindle: ISO 40 Bed: 345 x 800 mm Dimensions: 130x110x170 cm LxWxH

Condition: used, mileage: 553,461 km, power: 160 kW (217.54 HP), first registration: 04/2014, fuel type: diesel, empty load weight: 8,500 kg, maximum load weight: 3,490 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 5,200 mm, next inspection (TÜV): 01/2026, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 7,450 mm, loading space width: 2,400 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, cabin, central locking, cooling unit, differential lock, fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, tail-lift, traction control, German vehicle, TÜV valid until 01/2026, documentation available. Condition: see photos. Refrigerated box body POLARUS, type SLTK, Fresh-/deep-freeze box CARRIER, type SUPRA 850Mt, dimensions: length 7.45 m x width 2.40 m x height 2.40 m. Cooling capacity from -20° to +18°, 3-zone refrigeration system, stationary and in-transit cooling via diesel and electric drive. Extra-flat evaporator for optimal loading, rear portal doors, aluminum floor, MBB Palfinger tail lift, type 2000K, load capacity 2,000 kg. Air conditioning, automatic transmission, air suspension with lift/lower function, air-suspended driver comfort seat, snow chains, reversing camera, electric windows, heated electric mirrors, electric engine brake, Bluetooth phone, ABS and ASR, fog lights, cruise control, roof spoiler, roof hatch. Wheelbase: 5.20 m, gross vehicle weight: 11,990 kg, unladen weight: 8,500 kg, payload: 3,490 kg. If a new TÜV inspection is required, we are happy to provide an offer through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Additional trucks can be found on our website. We speak the following languages: German, English, Polish, Turkish. Ppodpfswivf Usx Ahlsw Note: We offer and highly recommend viewing and inspecting the item to avoid misunderstandings regarding the condition and suitability at the buyer’s end. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details provided are without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obligated to verify the condition and equipment of the goods/vehicles independently. Subject to prior sale, changes, and errors.

Condition: good (used), Spindle mount, vertical + horizontal SK 40 Arbor adjustment approx. 80 mm Table clamping surface 800 x 340 mm Travel distances X-axis 500 mm Y-axis 350 mm Z-axis 500 mm Speed range 35 – 1550 rpm Table adjustment: Feed rates 6 – 270 mm/min Rapid traverse rates X + Y Drive power approx. 3 kW Machine dimensions L x W x H 1350 x 1300 x 1880 mm Weight approx. 1750 kg Accessories / Special features: • Like-new 3-axis digital display SINO • Vertical milling head, swiveling R + L, arbor adjustment • Horizontal milling spindle • Feed in all axes • Rapid traverse X + Y • Coolant system • Emergency stop switch Podpfx Ahein Dktolepw Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 2,000 kg, The machine cuts A4 or A3 formats into sets of 100 or 200 sheets and simultaneously packs this quantity into slip lid boxes, so that the operator only needs to close and seal the lid. Ideal for materials such as photo paper, inkjet films, and all desktop products distributed in A4 boxes for the home office. Max. master roll width: 1280 mm. The machine is fully functional and connected. Test cutting is possible at any time. We also handle professional dismantling and loading onto a truck/container. Pedpexvrm Sefx Ahlopw

Condition: new, *IMMEDIATELY AVAILABLE* Including steel side walls / electric hydraulics / emergency hand pump / parabolic suspension / full steel floor / battery charger Technical Data: • Type: New vehicle • MOT: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 3,500 kg • Empty weight: approx. 1,100 kg • Payload: approx. 2,400 kg • Internal dimensions: 361 x 185 x 35 cm (L x W x H) • Total external dimensions: 514 x 200 x 118 cm (L x W x H) • Loading edge height: approx. 73 cm • Tyres: 185/70R13C steel rims • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including registration documents Body Construction: • Floor: Full steel floor, heavily reinforced • Side panels: Full steel side walls, hot-dip galvanized, removable • Side wall height: 35 cm • Chassis: Platform trailer, KNOTT parabolic axle • Tipping function: Yes, 3-way tipper • Hydraulics: Electric and manual tipping • Tipping angle: approx. 45°/47° • Hydraulic cylinder stages: 4-stage • Overrun device & brake: KNOTT • Frame/chassis: welded, hot-dip galvanized steel frame • Extensions: at extra cost • Lashing eyes: 8 in the floor • Supports: at extra cost • Ramps: at extra cost • Lighting plug: 13-pin • Registration: ZBII & COC documents Standard Equipment: • Full steel side walls, hot-dip galvanized and reinforced • Side and rear panels foldable • Removable side walls • Rear flap also pendulum mounted • Full steel floor – extremely robust • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Multiple sturdy cross beams for high point loads • Continuous welded longitudinal beams for additional reinforcement • Electric hydraulics for tipping, with built-in battery and cover • Integrated battery charger and charge indicator • Emergency hand pump mounted • Automatic reversing • Parabolic spring axles (leaf spring suspension) • KNOTT overrun device and parking brake • Ramp channel pre-fitted • Sturdy lever locks • Very strong, bolted V-drawbar, reinforced • 13-pin connector • Reversing lights • Large-dimension safety lighting • Integrated rear fog lamp • Tail lights recessed into rear frame • Central automatic jockey wheel • Registration papers: COC documents Optional Accessories – Enquire for details: • 100 km/h approval • Mesh side extension 60 cm • Closed sheet metal side extension 60 cm Podpfxeyyw Npj Ahlopw • Spare wheel • Toolbox • Rear supports • Ramps • Flat cover • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps • and more New vehicle with warranty and MOT. ————— - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be sent in advance or export plates (Germany) can be provided - Export plates incl. customs clearance possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available! For over 30 years, we have been an official dealer and repair workshop for industrial brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Subject to errors, omissions, and prior sale -

Condition: used, machine/vehicle number: XLDTBZ34200057905, axle configuration: 3 axles, first registration: 06/2008, loading space length: 13,260 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 14,040 mm, total width: 2,600 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 8,910 mm, color: other, Year of construction: 2008, Equipment: tail-lift, = Additional options and accessories = - Cooling Engine - Drum brakes - Lift Axle - Tailgate = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Tyre profile: 50% Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle Rear axle 2: Steering Pjdpfx Ahsx Sdkdslspw Weights Empty weight: 10.500 kg Carrying capacity: 31.500 kg GVW: 42.000 kg Functional Tail lift: D`Hollandia, slider lift, 2500 kg Cooling engine: diesel and electric (22523 operating hours diesel; 8506 electric) Identification Registration number: OK-60-JV

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany Pjdpjyy U Shsfx Ahlepw YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Ppodjzn Ak Sopfx Ahlew Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine. Ppjdpjzn Ak Esfx Ahlsw

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Ppjdpfxjzn Akfe Ahlew Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCE Type: AC Spindle Controller / Spindle Drive Power Rating: 26 kW Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller Only the items shown in the photos are included Note Ppsdpfxozn Aizs Ahlsw This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Year of construction: 1989, condition: used, Used Machine Year of Manufacture: 1989 Features and Technical Specifications: - Diamond polishing and milling machine - For high-gloss milling and polishing of straight plastic edges - Suitable for PMMA (acrylic glass) and other thermoplastics - Diamond polishing and milling unit Podpozpblqefx Ahlspw - Precision workpiece guidance - Robust welded steel construction - Power consumption: 1.5 kW - Supply voltage: 220 V - Mains frequency: 50 Hz Availability: available shortly Location: 63934 Röllbach

Condition: excellent (used), Power generator 85 kVA IFA – German production TECHNICAL PARAMETERS: diesel IFA 6VD14.5 / 12/2SRW engine generator VEB DGA 68/5 engine power 68 kW Pedpfoivtazjx Ahljpw generator power max 85 kVA liquid-cooled engine six-cylinder dimensions (length / width / height) 270 / 120 / 210 cm weight 1300 kg