Used Swivel Arm Dance for sale (8,293)

Condition: used, Swivel drive, pneumatic cylinder, wing drive, swivel module -Type: DMSI - Angle measuring system: integrated -Swivel angle: 0° - 270° -Number: 1x available -Price: per piece -Dimensions: 110/110/H270 mm -Weight: 9 kg Lsdpfx Afjdkpa Hjzjhb

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Orsta: B2-40/25x25 TGL10906 -Bearing inside: Ø 25 mm -Number: 3 x cylinders available -Price: per piece -Length: 235 mm -Weight: 2.8 kg/piece Lhedpfxed Svaps Afzsb

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting Lsdpfxjxak H Ej Afzjhb There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system Lhedpfx Aoxak D Refzob

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection Lhsdpexak Hxsfx Afzjb The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: excellent (used), Year of construction: 2022, arm length 5000 mm total column height 4540 mm Lhodpfxjx Ti D Eo Afzob weight max. in kg 250 kg

Condition: used, Year of construction: 1998, Technical details: lifting capacity: 0,25 t lift: 3000 mm span width: 6500 mm height lower edge cantilever arm: 2800 mm swival range : 360 ° total column height: 3240 mm column diameter: 500 mm Tare weight: 30 kg(Kettentrieb) kg protection class: IP 54 connection voltage: 230/400 V Lhjdow Rz Aajpfx Afzsb stroke speed: 10/2,5 m/min Weight approx.: 0,17 + 0,65 (26 Europaletten 25kg) t Telescopic boom electrically extendable to a reach of 10,000 mm Telescopic speed 10 m/min Operating voltage 380/400 V 50 Hz *

Condition: used, Year of construction: 1995, Technical details: lifting capacity: 250 t lift: 3000 mm span width: - mm Lhodpfx Asw Rl I Hjfzsb total height: 3,635 m column diameter: 200 x 200 (Viereckige Säule) mm Arm length: 3,215 m electr. trolley: 6 kg stroke speed: 6/1,5 m/min weight: 3400 kg The WK 1 from Kaltenbach (KA-Cranes) is a mobile pillar type crane (also known as a mobile crane). It is designed for assembly, manufacturing, and flexible load handling and does not require a fixed foundation. *

Condition: used, Year of construction: 2000, Technical details: Ledpfxju Nvmdo Afzshb lifting capacity: 1,0 t Arm length: ca. 5000 mm height lower edge cantilever arm: 3200 mm cantilever arm length from center column: 4500 mm column diameter: 406 mm rotation: 120° ° crane classification: DIN 15018 H2B3 dimensions L x W x H: Kran: 4,62 x 0,62 x 3,5 m dimensions L x W x H: Ausleger: 7,6 x 0,66 x 0,37 m The slewing pillar crane consists of the following main groups: Pedestal boom (transport dimensions L: 7600mm x W: 660mm x H: 370mm) Hoisting gear: Balkancar type MB 093n, lifting height 4 meters; load chain type 7,2 x 21 double chain; hook/buckle with rope safety, pendant control Type 071/53 Slewing operation manual outreach column to crane hook = 4.000mm height of column = 3.200mm; running width on jib = 180mm Column base flange Ø 700mm; pitch circle Ø 520mm, 12 holes Ø 31mm *

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm Lsdpfx Aoybaqkefzshb - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Lhsdpoybalzsfx Afzjb Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Lodjybalnjpfx Afzjhb Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Lsdpfoybalhjx Afzjhb

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Lhedpfxjybak Do Afzjb Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : Lhedoybakdepfx Afzeb 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? Lsdpfx Ajybahiofzehb - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. Lhodpfx Afsybahcszsb - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided Lsdpfsybagfsx Afzohb - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideally suited for storing heavy long goods such as pipes, profiles, metal rods, steel beams, wooden battens, and sheet material. With a total length of approx. 13.20 meters, a height of approx. 4.00 meters, and cantilever arms of approx. 120 cm, this long goods rack offers high storage capacity across a total of 4 storage levels (foot level plus 3 additional tiers). Each cantilever arm supports up to 500 kg, and each upright can be loaded up to 2,250 kg. The cantilever arms are bolted and their height can be flexibly adjusted in 200 mm increments using the perforation grid. The fully hot-dip galvanized material ensures long-lasting protection for indoor and outdoor use – new stock available from our warehouse in Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever rack - Total rack row length: approx. 13.20 m - Overall height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Axial distance (upright spacing): approx. 131 cm - Levels: foot level plus 3 storage levels - Load capacity per arm: max. 500 kg (with even load distribution) - Load capacity per upright: max. 2,250 kg (with even load distribution) - Upright profile: IPE 160, approx. 400 cm, incl. base - Upright perforation grid: approx. 20 cm - First perforation above base: approx. 107.5 cm (top of base) - Uppermost pair of holes: approx. 50 cm below upright head (top of upright) - Design: single-sided, bolted cantilever arms - Surface: fully hot-dip galvanized - Availability: New / B-grade return stock available from Wietmarschen warehouse SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made from IPE 160, incl. base, 20 cm perforation grid - 33 x cantilever arms, approx. 120 cm made from IPE 80 (without stoppers) - Incl. all connecting elements - Incl. all required bolts - 1 x load capacity sign Ledjya Ux Tjpfx Afzshb Price: €5,660.00 net €6,735.40 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Delivery throughout Germany by our partner hauliers – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our design department will be happy to prepare a non-binding quote tailored to your requirements. Whether new construction, modification, or expansion – we offer expert advice for your rack configuration. Still haven’t found the right solution? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone call. You will find our phone number on our company page. You can reach us by phone Monday to Friday, 8:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Lsdpeya Uvljfx Afzjhb Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 Lsdpfxeya Uu Uo Afzehb - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, functionality: fully functional, Year of construction: 2026, New hydraulic profile bending machine from manufacturer MAC Bending. Model: ARM45H. Optional equipment: Two speeds. Digital read-out. Rolls for pipes, angle profiles, and various other profiles. Warranty: 1 year. Delivery time: 7 weeks. Other models from the catalogue are also available, please email M2Trade. Should service be required, it will, of course, be provided by M2Trade. Thanks to its durable and reliable design, maintenance is kept to a minimum. Ledpjya T Hvjfx Afzjhb

Condition: excellent (used), mileage: 270,000 km, first registration: 01/2013, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 6,700 mm, Year of construction: 2013, Equipment: air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Brake booster - Low noise - Speed limiter - Refrigerator Lhodpfx Afout Dn Aozjb - Alloy wheels - Air suspension - Radio/CD player - Reversing camera - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication system - Towing bracket = Additional Information = Axle Configuration Front axle 1: Alloy wheels; Steered Front axle 2: Alloy wheels; Steered Rear axle 1: Alloy wheels; Suspension: Air suspension Rear axle 2: Alloy wheels; Suspension: Air suspension Weights Unladen weight: 20,305 kg Payload: 11,695 kg Gross vehicle weight (GVW): 32,000 kg Functional Crane: HIAB 622 E-8 Hipro, mounted behind the cab Superstructure brand: HIAB 622 E-8 CE certification: yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request

Condition: excellent (used), mileage: 882,336 km, power: 330 kW (448.67 HP), first registration: 04/2016, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 6,250 mm, fuel: diesel, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,950 mm, total width: 2,550 mm, Year of construction: 2016, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminium fuel tank - Exterior thermometer - Heated mirrors - Passenger seat - Leaf suspension - Roof hatch - Differential lock - Digital tachograph - Speed limiter - Lift axle - Air conditioning - Refrigerator - Air suspension - Air-suspended seats - Particulate filter - Radio/CD player - Reversing camera - Sleeper cab - Side door - Sun visor - Lane departure warning system - Stability control - Auxiliary heater - Idle warming system - Toolbox - Power take-off (PTO) - Central lubrication - Towing hitch = Further Information = Technical information Number of cylinders: 6 Engine displacement: 12,809 cc Axle configuration Brakes: disc brakes Front axle: Tire size: 385/65 R 22.5; max. axle load: 9,000 kg; steering; left tire tread: 50%; right tire tread: 50%; suspension: leaf spring Rear axle 1: Tire size: 315/70 R 22.5; twin tires; differential lock; max. axle load: 11,500 kg; left inner tire tread: 40%; left outer tire tread: 30%; right inner tire tread: 30%; right outer tire tread: 30%; reduction: outboard planetary axles; suspension: air suspension Rear axle 2: Tire size: 385/65 R 22.5; lift axle; max. axle load: 7,500 kg; left tire tread: 40%; right tire tread: 60%; suspension: air suspension Weights Curb weight: 12,535 kg Payload: 15,465 kg Gross vehicle weight (GVW): 28,000 kg Functional Body brand: HIAB MULTILIFT Maintenance, history and condition APK (main technical inspection): valid until 08/2026 Ljdpfx Afsyaq Dfszshb Technical condition: very good Visual condition: very good Identification Registration number: 86-BHF-3

Condition: good (used), Swing arm punching machine by Schön, in good condition, immediately available. If interested, we are happy to provide information about other machines available at our company. You are welcome to inspect the machine at our premises by prior appointment. Lhodpfovvhfuox Afzob