Used Table Circular Saw for sale (20,694)

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit Bcedpfodzp T Dex Ag Iow - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei Bcjdjynngaopfx Ag Ijw 4500 € 315 mm 315x32x63 mm 45 / 90 U/Min rund 105 mm / quadratisch rund 90 mm / quadratisch 600 mm 1000 mm 1400 mm 200 kg Pneumatic vice Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Split visc (clamps before and after the sawblade) Self-centering visc for optimal cutting position Large base frame for high stability Sawblade not included

Condition: new, Year of construction: 2023, Capacity Ø 15 - 100 mm sawing motor 11 kW Bodpoyk Ihvofx Ag Iscw saw speed 30-130 U / min hydraulic motor 2,2 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens saw-blade dia. Ø360 x T2.6 x 2.25 x 40 mm cutting range min. 3000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 2900 x 7400 m weight of the machine ca. 4900 kg GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: new, Year of construction: 2005, Carriage length: 2000 mm Cutting width at rip fence: 700 mm Cutting width at crosscut fence: 2200 mm Cutting depth: 100 mm Scoring unit: no Saw blade height adjustment: manual / hand crank Saw blade tilt adjustment: manual / hand crank Rip fence adjustment: manual Saw blade angle display: digital Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 315 mm Speeds: 1 Motor power: 4 kW Motor brake: yes – automatic Extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 900 kg Bcodpoxrbh Rofx Ag Isw

Condition: new, Year of construction: 2025, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 125 mm Scorer: yes Saw blade height adjustment: hand wheel Pivot adjustment saw blade: hand wheel Width stop adjustment: manual Display saw blade angle: scale Cutting height display: - Display width stop: Scale Display cutting ruler: Scala Saw blade diameter: 400mm Speeds: 3000 / 4000 / 5000 rpm Engine power: 7 kW Bcodeiv Hdvspfx Ag Iow Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm Weight: 900kg

Condition: as good as new (ex-display), Year of construction: 2026, sliding table length: 3200 mm cutting width at the fence: 1350 mm cutting width at the cross cut: 3200 mm cutting depth: 125 mm scoring unit: ja sawblade diameter: electric tilting adjustment sawblade: electric adjustment fence: manuell Bsdpegfm Efefx Ag Iscw readout sawblade tilting: Scala read out sawblade height: - read out fence: Scala read out crosscut stop: Scala sawblade diameter: 400mm number of speeds: 3000 / 4000 / 5000 U/min motor power: 7 kW motor brake: yes, automatic suction connection: 80mm und 120mm machine length: 3400mm machine width: 2000mm weight: 900kg

Condition: used, Year of construction: 2004, Sliding carriage length: 3000 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilting adjustment: electric Rip fence adjustment: manual Crosscut fence adjustment: manual Bodeyl Tihopfx Ag Iscw Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: scale Saw blade diameter: 500 mm Spindle speeds: 4 Motor power: 7.5 kW Extraction port: 80 and 120 mm Machine length: 3600 mm Machine width: 2200 mm Weight: 1200 kg

Condition: good (used), For sale is a used Holzprofi panel saw M2-PS315/2000F with a cutting width of 1000 mm. The machine is in good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical data: - Tilting saw blade 90-45° - Scoring unit (belt drive) - Sliding table 2000 mm - Cutting width 1000 mm (rear part foldable) - Extension table with cross-cut fence 2600 mm - Hold-down clamp and short mitre fence, edging shoe - 3.7 kW / 5 HP motor 400 Volt Bodpfxjynahvj Ag Ijcw The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, sliding table saw Reference: R-C10J6

Condition: like new (used), Year of construction: 2024, For sale is a used Felder sliding table panel saw K540S with an 800 mm cutting width. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical Specifications: - Saw blade tiltable 90-45° - Max. saw blade diameter D = 400 mm, cutting height 140 mm - Sliding table length 2800 mm Bcodpfeym U Uzsx Ag Iow - Outrigger table 1300 mm with 2600 mm miter fence - Cutting width 800 mm - Overhead saw blade guard - 7.5 HP (5.5 kW) motor - Machine no. 442.07.151.24 The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-K0AFZ

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 3615 102 087, saw blade diameter: 350 mm, New Price KASTO radial U10 good as new Bcjdpfevwm Ecox Ag Iew A lot of new saw blade, (see pictures)

Condition: new, Massive work table made of heavily ribbed cast iron Robust base frame constructed from welded steel Precision sliding table made of anodized aluminum Carbide guideways – for long-term precision and minimal maintenance of the sliding carriage Tilting cast iron saw unit with double segment guide Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding table Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality panel frame & telescopic stop, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two steps (from above, table insert removable) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm): 140 with 400 mm blade Max. cutting height at 45° (mm): 100 with 400 mm blade Saw blade tilting range (degrees): 90/46° Manual saw blade lifting and tilting Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scoring unit motor power (kW) 50 Hz: 1.3 Scoring unit speed (rpm): 9,200 Panel cutting capacity (mm): 3,200 x 3,200 Cutting width for parallel cuts (mm): 1,270 Bcedpoit I Sbofx Ag Iow Extraction port diameter (mm): 120, 60

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Bcsdjxzfqbopfx Ag Ijw Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 90 mm, saw blade diameter: 400 mm, height adjustment type: electric, rotational speed (max.): 5,000 rpm, overall weight: 1,810 kg, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,250 mm, extraction nozzle diameter: 100 mm, slide length: 3,200 mm, warranty duration: 12 months, Equipment: motor brake, SC-400/3200 Top. Machine with good quality and solid construction. A machine that meets your expectations. Bcjdpfswizxajx Ag Iew Stroke length 3200 mm, saw blade 400 mm, scoring blade. The machine is available in several different models and different sizes. Very affordable machine.

Condition: used, Year of construction: 1995, incl. duplex stop, overhead control panel, 5.5 kW motor, sliding table 3200 mm, scoring unit. Saw blade diameter without scorer: max. 450 mm. Saw blade diameter with scorer: max. 400 mm. Speeds: 3000/4000/5000/6000 rpm. Digital speed display. Digital display at the parallel fence (DIGIT X). Cutting width: 1300 mm. Table extension 800 mm. Storage location: supplier. Bcjdpfeylxa Eex Ag Isw

Condition: new, Circular saw blade diameter 300 mm Bore 40 mm Bedpfxemxi T Ao Ag Iscw thickness 3 mm Number of teeth 180 Pitch circle driver bore 63 mm diameter driving hole 11mm HSS unused ,from magazine liquidation bearing number 28418

Condition: new, Circular saw blade HSS diameter 225 mm Bcedpfx Agemxi T Uo Iow Number of teeth 180 pitch 4 mm width 2 mm Bore 32 mm (28419) unused, from magazine liquidation

Condition: new, Year of construction: 2025, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 125 mm, cutting width (max.): 1,300 mm, saw blade diameter: 400 mm, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,200 rpm, total length: 3,500 mm, total width: 2,300 mm, total height: 1,700 mm, overall weight: 1,000 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, No. 04509 Sliding table saw Casolin ASTRA 400 / NEW New, year of construction 2025 Manufacturer warranty on mechanical parts until 11.11.2026 Manufacturer warranty on electrical parts until 11.05.2026 Sliding table length 3200 mm, width 360 mm, with 2 rollers, anodized aluminium Bsdpfjylp Dnsx Ag Iocw Cutting width 1300 mm Saw blade diameter 300 - 400 mm Saw spindle diameter 30 mm Saw motor 5.5 kW with motor brake Scoring blade diameter 120 mm Scoring spindle diameter 20 mm Scoring unit speed 8200 rpm Scoring unit 0,55 kW Cutting height (saw blade diameter 400 mm) 125 mm Cutting height (saw blade diameter 400 mm, cutting angle 45°) 88 mm Electric height adjustment & electric angle adjustment Electric height adjustment and alignment of the scoring unit Speed 3200 / 4200 / 5000 rpm Digital display for speed Digital display for cutting angle 0° - 45.5° with automatic return to 0° Pivoting overhead saw guard Manual telescopic fence with 2 tiltable stops Cross table with telescopic fence +- 49° pivotable/tiltable Automatic star-delta starter Main emergency stop switch 400 V - three-phase current - 50 Hz Machine CE-compliant Incl. used saw blade, diameter 315 mm Incl. technical documentation Transport dimensions approx. 3500 x 2300 x 1700 mm LWH Weight approx. 1000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 450 mm, cutting range round steel at 90°: 150 mm, Kaltenbach KKS 450 E, fully refurbished with 12 months warranty. The KKS 450 E is a semi-automatic mitre saw for ferrous and non-ferrous metals such as: steel, stainless steel, chromium steel, brass, copper, bronze, etc. Bcodsynut Tjpfx Ag Iew Key advantages at a glance: - Clamping, sawing, turning, and opening – all with a single lever - Adjustable saw height using a lever - User-friendly mechanical controls mounted directly on the machine - Easy access for saw blade changes and maintenance work - Workpiece clamping system on both sides of the saw blade - Two sawing speeds suitable for virtually all applications - Ergonomically positioned controls for ease of use - Adjustable stroke limit and rapid return of the saw blade All refurbished Kaltenbach machines are supplied as standard with a 12-month warranty.

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 130 mm, Kaltenbach KKS 400 E is fully overhauled and comes with a 12-month warranty Bcedpfx Agsynutys Iow The KKS 400 E is a semi-automatic mitre saw suitable for ferrous and non-ferrous metals such as steel, stainless steel, chrome steel, brass, copper, bronze, etc. Advantages at a glance: • Clamping, sawing, turning, and opening – all controlled with a single lever • Saw height adjustment by means of a lever • User-friendly mechanical controls mounted directly on the machine • Easy access for saw blade changes and maintenance • Workpiece clamping devices on both sides of the saw blade • Two cutting speeds for virtually all applications • Ergonomically positioned controls for ease of use • Adjustable cutting stroke limiter and fast return of the saw blade All refurbished machines are supplied as standard with a 12-month warranty. Transport and installation possible throughout the Netherlands, Belgium, and Luxembourg.

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Bjdpfxjgixvwo Ag Iscw Cutting height at 90° : 200 mm Cutting with: 130 mm Power: 5,1 kW Weigth: 1260 kg

Condition: used, Eisele VMS III PV saw Further information to follow. Bsdpfx Agowmk Hbo Iscw

Condition: new, Tubend aluminum circular saw / underfloor saw AC 550 Special equipment included in the price: Bcsdpfx Ajkckx Usg Iow Pneumatic vertical and horizontal clamping by 4 clamping jacks Feed of the saw blade steplessly adjustable Minimum quantity lubrication 3m roller conveyor Description saw blade diameter: 550 x 32 x 4 mm speed 3580 rpm Cutting area 90° rectangular 260 x 200 mm Cutting area 90° square 155 x 155 mm Cutting area 45° rectangular 180 x 200 mm Cutting area 45° square 130 x130 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 3 kW Machine weight approx. 250 kg

Condition: new, Bernardo circular saw FKS 2000 Pro/ 400 V Technical specifications Table dimension 800 x 380 mm Format table 2000 x 270 mm Trimming length 2000 mm Max saw blade diameter 315 x 30 mm Max cutting height 90° / 45° 100 / 80 mm Cutting width at the parallel stop 1200 mm Table height 870 mm Table extension 500 x 310 mm Table widening 800 x 880 mm Boom table with roll 700 x 580 mm Speed Main saw blade 4000 rpm Speed scoring saw blade 5800 rpm Scribble saw blade 90 x 20 mm Suction connection of 100 mm Engine power S1 100% 3.8 kW (5.1 hp) Motor recording power S6 40% 5.3 kW (7.2 hp) Voltage 400 V Machine dimensions (W x D x H) 2000 x 2900 x 1180 mm Weight approx. 280 kg Delivery • HM saw blade 315 x 3.0 x 30 mm / Z 40 • Pre-cut saw blade 90 x 3.0 x 20 mm / Z 12 • Saw blade protection hood with suction connection Bcodpfx Aod N Tagsg Ijw • Connection hose with Y-piece • Miter stop with eccentric tensioner • Miter stop • Trimming shoe • Table extension • Table widening • Parallel stop • Extendable telescopic stop • Stop flap with fine adjustment • Boom table • Sliding stick • Sliding handle • Operating tool Properties • Extendable telescopic stop (up to 2260 mm) mountable at the front and rear boom table, infinitely pivotable from 90° to 45° • Important performance feature: saw blade diameter 315 mm can also be used when the scoring unit is mounted • Large-sized work table and standard table widening for cutting

Condition: new, Tubend aluminum circular saw / underfloor saw AC 400 Special equipment included in the price: Pneumatic vertical and horizontal clamping Bcsdpfx Agjkckgvs Ijw by 4 clamping jacks Minimum quantity lubrication 3m roller conveyor Description saw blade diameter: 400 x 32 x 4 mm speed 3000 rpm cutting area 90° rectangular 150 x 100 mm Cutting area 90° square 120 x 120 mm Cutting area 45° rectangular 130 x 80 mm Cutting area 45° square 100 x100 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 1,5 kW Machine weight approx. 140 kg

Condition: new, Bernardo manual metal circular saw CS 315 H Technical specifications Saw blade diameter of 315 x 40 mm Speed 19 / 38 U/min Vice opened Max 150 mm Working height 920 mm S1 motor power output 100% 0,75 / 1,5 kW Motor power S6 40% 1.0 / 2,1 kW Voltage 400 V Machine dimensions (W x D x H) 530 x 1000 x 1740 mm Weight 235 kg Bsdpfx Aged Id Uge Iscw Round solid material 90°: 80 mm 45°: 70 mm Round tube 90°: 80 mm 45°: 70 mm Square shaped tube 90°: 80 x 80 mm 45: 70 x 70 mm Solid material square 90°: 80 x 80 mm 45: 70 x 70 mm Square tube rectangular 90°: 90 x 80 mm 45: 80 x 70 mm Rectangular solid material 90°: 90 x 80 mm 45: 80 x 70 mm Properties Gear head for slot working left and right 90 ° swiveling Removable coolant tank in the robust base integriergt Gearbox with hardened and ground Auger and bronze worm wheel Security guard opens automatically when the cutting Precise, 4 guided, self-centering double clamping vise Ergonomically shaped handle with push button for fatigue-free cutting Low speed of the saw blade (19 / 38 RPM) optimal for cutting of full materials Reduction gear low noise running in an oil bath Scope of delivery Coolant system with filter Self centering Vice Base