Used Tearing for sale (482)

Condition: good (used), Approx. 452 Meta shelving units, 1m x 0.40m / 0.60m - used: Price per shelving unit: €8.00 (net)! Minimum order quantity: 50 pieces Manufacturer: Meta Type: Meta Clip Year of manufacture: unknown Depth: 60cm Width 1m = approx. 52 pieces Depth: 40cm Width 1m = approx. 400 pieces The shelving units show some wear and tear at the mounting points for the shelf supports, and some are slightly bent. However, a tap with a hammer should be sufficient to allow them to be reattached without any problems. Height: approx. 4cm Load capacity: unknown – should be able to support at least 100kg Fpodpfxeki Txcj Am Eep Condition: good Available: immediately Location: Frankenberg / Saxony

Condition: ready for operation (used), Liebherr B 814C8000-01 AKAGS circuit board, serial number HO061, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Fpjdpfxsi Eby Do Am Eep

Condition: ready for operation (used), Seidel 4K-P240/90-B power supply, serial number as shown in the photo, used, with normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Fpsdoi Ec N Djpfx Am Eep

Condition: ready for operation (used), Siemens 6FC5012-0CA01-0AA0 Interface E, Stand C, used, shows normal signs of wear and tear, 100% functional, scope of delivery as shown in the photos. Fsdpoi Edxnjfx Am Espp

Year of construction: 2025, condition: new, Cellophane wrapping machine for large products. - Technical specifications: max. speed of the machine in neutral: 23 cycles/minute; product dimensions (mm): L(100-405)xW(45-250)xH(25-115); machine dimensions (mm): L2200xW1000xH1700; 380V, 6.5kW; 5-7 Bar, 0,46 m³/min; weight (net/gross): 800/950kg. 1 tool included, tear tape dispenser included, infeed conveyor (L1500xW240mm) included Fjdpfx Amev Nkxws Eopp Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, operating pressure: 6 bar, conveyor belt width: 1,000 mm, production capacity: 18,000 unit/h, The new price of the machine was €460,000! TECHNICAL DETAILS System type: NIVERPLAST packaging line / roll packaging machine Maximum output: 18,000 products/h Fpedpfx Aezaq Anjm Eop Packaging unit: 20 pieces Electrical connection: 400 V AC + N + PE / 50 Hz Minimum compressed air connection: 6 bar Compressed air connection: 3/8" Camera counting module Camera system: 1 color camera Baguette capacity: 10,000 pieces/h Maximum capacity for individual products: 60,000 pieces/h LED lighting lifespan: 30,000 h Touchscreen: 19" Conveyor width: 1,000 mm SEPP tubular bag machine Type: VFFS 45° Filling weight: 0.5 - 5.0 kg Maximum output: 2,400 bags/h Drive: AC motor, Lenze Frame: Stainless steel Protective cover: Polycarbonate 6 mm Bag dimensions Bag length: min. 100 mm Bag length: max. 900 mm Bag width: min. 220 mm Bag width: max. 465 mm Film dimensions Film width: min. 500 mm Film width: max. 970 mm Carton erector C-400 Carton length: min. 300 mm Carton length: max. 600 mm Carton width: min. 200 mm Carton width: max. 400 mm Carton height: min. 120 mm Carton height: max. 500 mm Format changeover time: approx. 1 - 2 min Working and discharge height: 600 mm ± 30 mm Carton closer CS-300 Carton length: min. 300 mm Carton length: max. 650 mm Carton width: min. 200 mm Carton width: max. 450 mm Carton height H: min. 115 mm Carton height H: max. 350 mm Carton height C: min. 200 mm Carton height C: max. 500 mm Format changeover time: approx. 1 min Adhesive tape roll length: approx. 990 m Adhesive tape width: 50 mm EQUIPMENT Product feed conveyor Elevator conveyor Intermediate conveyor Camera counting Platform for camera counting Batch conveyor with buffer flap Cross conveyor Discharge chute SEPP Niverplast tubular bag machine 45° inclined forming tube Thermal transfer printer Bag transport Turntable Carton erector Lantech C-400 Empty carton conveyor Button to request empty cartons Packing position Full carton conveyor Gravity roller conveyor Carton closer Control cabinet including control panel and power supply LED light bar, air-cooled Retraction belt with pneumatic drive Separation finger made of stainless steel Stainless steel frame Stainless steel control cabinets on the counting module Film roll drive Detection of empty film rolls Film tear detection Film buffer Tension cylinder Integrated film alignment Automatic film alignment with sensor Impulse sealing with film cutting knife Bottom closure with self-adhesive strip Format adjustment by means of handwheels Clear plastic cover Side presser on the cutting magazine Side curtain on the cutting magazine Control "Carton properly erected" Control "Self-adhesive tape used up or torn" Control "Carton past vacuum suction frame" Discharge with photocell control "Discharge free" Carton closure on top with adhesive tape Open cable channel with metal-detectable cable ties Powder-coated control cabinet HMI Lenze v800-P IPC Lenze, Codesys, IEC 61131 Safety components Pilz Drives Lenze Pneumatic components Festo Sensors Sick

Condition: used, Mazak Teaching Box/Teach Pendant 7780003000 – Original Yamazaki Mazak For sale is an original Mazak Teaching Box / Teach Pendant, part number 7780003000 (B-02), from Yamazaki Mazak Corporation. The handheld unit is in fully functional condition and operates perfectly. Cosmetically, it shows only the usual signs of wear and tear consistent with age and use (see photos). Technical Specifications Manufacturer: Yamazaki Mazak Corporation Part Number: 7780003000 Fpedpfjzrpx Rjx Am Eep Original Mazak spare part Made in Japan Condition Used Technically sound and fully functional Display, buttons, and emergency stop function correctly Normal signs of use on the housing and cable (see images) Scope of Delivery 1 × Mazak Teaching Box 7780003000 Connection cable Delivered as shown

Condition: used, functionality: fully functional, power: 183 kW (248.81 HP), gearing type: automatic, fuel type: diesel, overall weight: 42,250 kg, axle configuration: 6x6, Year of construction: 1994, operating hours: 9,999 h, For sale is a Moxy MT27 with a concrete mixer body, manufactured in 1994. The vehicle features a 6x6 all-wheel drive system and an articulated steering system. Its robust design makes it particularly suitable for use on construction sites, in quarries, and in difficult-to-access terrain. Technical specifications: * Manufacturer: MOXY Trucks AS * Model: MT27 * Year of manufacture: 1994 * Engine power: 183 kW / approx. 249 hp * Fuel: Diesel * Drive: 6x6 * Steering: Articulated steering * Permissible total weight: 42,250 kg * Permissible front axle load: 15,200 kg * Permissible rear axle load: 32,300 kg * Body: Concrete mixer drum * Operating hours: On request / to be checked Fpsdpfo Abnqnjx Am Ejp Equipment: * Concrete mixer body * All-wheel drive 6x6 * Hydraulic articulated steering * Enclosed driver's cab * Large off-road tires * Rear ladder and work platform * Concrete discharge chute * Water lines on the mixer Condition: Used construction site vehicle with signs of wear and tear consistent with its age and use. Visible paint damage, rust spots, and soiling are present. The interior shows clear signs of wear and tear. Some lines and cables are visible. The technical condition and the functionality of the drive and the mixer drum have not yet been confirmed. Sold in its current condition. Inspection possible by appointment. Subject to errors, prior sale, and typing errors.

Condition: excellent (used), Kmmaculate tear top pouch filler sealer for retortable pouches. Direct from recently closed Babyfoods factory. All other machinery from this facility is also available. Fjdoy Iuu Espfx Am Espp

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. The machine is immediately ready for full operation. Fpedpez Dbtzjfx Am Eep Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Power supply: 3/N/PE Frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 24 V Power: 28 kVA Rated current: 45 A Fuse: 50 A slow-blow/quick-blow If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 11,047 h, Linde H40T-04 Gas Forklift | 4.0 t | Full Cab | Valid UVV Inspection We are selling a fully functional Linde H40T-04 gas forklift with a lifting capacity of 4,000 kg, a full cab, and dual pedal control. The forklift is in operational condition and has a valid UVV inspection certificate. Ideal for transporting and lifting heavy loads in warehouses, production facilities, and on company premises. Technical data: Manufacturer: Linde Model: H40T-04 Year of manufacture: 2004 Operating hours: 11,047 h Lifting capacity: 4,000 kg Drive: Gas (LPG) Mast: Telemast without free lift Lifting height: 3,900 mm Overall height: 2,750 mm Equipment: Full cab Dual pedal control Dual auxiliary hydraulics Fsdpfezp Dwiex Am Eopp Work lights front and rear Condition: Fully functional and ready for use Valid UVV inspection Signs of wear and tear consistent with age and use Inspection & Transport: The forklift is located in 53840 Troisdorf and can be inspected and tested for functionality on-site by appointment. Transport can be arranged upon request for an additional fee. Price: 8,250.00 € net, negotiable, plus statutory VAT. Gross price: 9,817.50 € Sold by ZWi Technologies GmbH. If you are interested, we look forward to hearing from you or receiving your call.

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 6,800 h, Neuson 3402 Year of manufacture: 1999 Approximately 6,800 operating hours Lehnhoff MS03 quick-change system Fodpfx Amoz Hirko Eepp Hydraulic tilting bucket 1 digging bucket Tracks approximately 75% worn Swivel joint sealed Wear and tear consistent with age Door included Ready for immediate use Delivery possible

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Fpedpfoz Ad Dcjx Am Eop Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, PRICE REDUCED: €29,000 → €25,000 (excluding VAT) – machine available immediately Resta automatic mattress packaging machine: integrated compression and decompression The Resta mattress packaging machine is an automatic packaging machine dedicated to the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with compression and then decompression of the mattress, while protecting it in a suitable film. Advantages of mattress packaging in production and distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated compression: mattresses packaged in PVC or plastic film, without manual intervention Easy decompression: the mattress returns to its normal shape in the store or at the customer's location Optimized transport: significant reduction in volume, with more space in the truck and in storage Preparation for sale: final presentation of the mattress in appropriate commercial conditions Vacuum packaging machine: protection and transport of the mattress What really changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, PVC film or plastic film, and ensures a hermetic seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Compatible with spring and foam mattresses Ideal when your production mixes spring and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment handles both bagged mattresses and compressible structures equally well, simplifying workshop organization. Spring mattresses: compression without damaging the springs, thanks to a progressive hydraulic system Fjdpfx Amszmpvrj Ejpp Foam mattresses: adaptation specific to the product, with rapid shape recovery after compression Compatible with PVC film and other specialized packaging films Professional sealing: hermetic closure of the film to protect the mattress during transport Industrial applications and mattress packaging processes In practice, on an industrial mattress packaging line, this Resta automatic packaging machine is integrated after the [omitted: the text stops mid-sentence]. Special feature: allows double independent packaging (two separate bags) in the same space as a standard packaging machine, thanks to two superimposed polyethylene rolls. It also allows single or customized packaging (two different rolls, automatic change according to programming). The feeding belt and detachable press also allow packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official technical specifications: Weight: 4,900 kg Electrical consumption: 11 kW Compressed air: 6-10 bar Power supply: 400V – 50Hz three-phase Available options: Press with 2 or 4 cylinders Reinforced hoist Motorized cradle for additional customization rolls Kit for removing polyethylene waste

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0748, film width: 400 mm, compressed air connection: 6 bar, number of blades: 1, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this used Ravizza Packaging SRL SIMPLICITA BAG SMART 400H pouch-making machine, manufactured in 2021. Manufacturer: Ravizza Packaging SRL Model: SIMPLICITA BAG SMART 400H Year of manufacture: 2021 Condition: used Category ID: 536 Type ID: 1939 Machine type: pouch-making machine For sale is a high-quality packaging system from the manufacturer Ravizza Packaging SRL (Italy). Additionally equipped with: EIDOS Swing Mk II thermal transfer printer integrated conveyor belt film feed Fpsdpfx Ame Ad Ivps Eep existing film rolls as shown in the photos Condition: The system is in good condition and was used in production until recently. Normal signs of wear and tear corresponding to its age and area of application are present. An inspection and demonstration of the machine's functionality are highly recommended and can be arranged by appointment. Collection: The machine is located in Germany, 63589 Linsengericht, and is available for inspection and collection. Loading can be supported upon agreement.

Year of construction: 2023, operating hours: 400 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10948/11/23, For sale is a like-new MHG rotary table blasting system – an injector sandblasting system, type SMG 260 DTTA, for blasting components on a rotary table. The system was manufactured in 2022 and has only approximately 400 operating hours. Blasting was carried out exclusively with glass beads, resulting in minimal wear and tear, leaving the system in almost new condition. The blasting system has 3 blasting stations with a total of 8 automatic blasting nozzles. The injector blasting nozzles are flexibly lockable and adjustable, allowing them to be precisely aligned with different components (max. component height 350 mm). Loading is done via 2 airlocks with an automatic compressed air blow-off device. A side viewing window with an impact protection flap, 2 side doors, a safety light curtain, and a release mechanism ensure control and safety. The abrasive material storage container is equipped with a level indicator (MIN). Fodpfx Ame Adzhrs Eepp The system is controlled via a Siemens SIMATIC HMI control system with a KTP700 display. A 30 m³ dust collector ensures the necessary vacuum and room air extraction; the system's power consumption is 6 kW. The system has already been partially disassembled and is ready for pickup. Manufacturer: MHG Strahlanlagen GmbH, Düsseldorf Type: Injector sandblasting system SMG 260 DTTA (rotary table blasting system) Year of manufacture: 2023 Operating hours: approx. 400 hours Condition: Almost new – blasted exclusively with glass beads, minimal wear Housing color: RAL 7021 Blasting stations: 3 blasting stations with a total of 8 automatic blasting nozzles Blasting nozzles: Injector blasting nozzles, flexibly lockable and adjustable Max. component height: 350 mm Airlocks: 2 airlocks with automatic compressed air blow-off device Viewing window: Side viewing window with impact protection flap Access: 2 side doors, safety light curtain, release mechanism Abrasive material container: With level indicator (MIN) Control system: Siemens SIMATIC HMI, KTP700 display Power consumption: 6 kW Dust collector: 30 m³ dust collector for vacuum and room air extraction Location: 35216 Biedenkopf

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with joining unit and veneer stop table A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 4200 mm Saw unit and joining unit are combined in a single unit, so that only one unit needs to be moved. Saw unit is easy to guide and runs on ground and hardened shafts. The function of the joining blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with continuous finger stop, adjustable from approx. 2 - 50 cm, with pneumatic clamping. Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2 kW. Fine-cutting blade with carbide tips, sharpened. Fedpfx Aj Ahrgajm Espp Joining blade with PKD (polycrystalline diamond) tips, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80 mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. On-board tools. Saw blade and secondary cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600 mm (L x W x H). Weight approx. 800 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration; see "other offers from this supplier."

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2451498, load capacity: 360 kg, mast type: telescopic, lifting height: 12,190 mm, platform length: 2,920 mm, platform width: 1,650 mm, overall weight: 5,300 kg, transport length: 3,070 mm, transport width: 1,750 mm, fuel type: electric, tire size: 240/55-17.5, ground clearance: 20 mm, color: white, Technical specifications Year of manufacture: 2006 Working height: 14.19 m Platform height: 12.19 m Platform height, retracted: 1.73 m Platform railing height: 1.10 m Clearance height: 2.04 m Platform dimensions (L x W): 1.65 m x 2.92 m Platform extension: 0.91 m Overall dimensions (L x W x H): 3.07 m x 1.75 m x 1.73 m Wheelbase: 2.32 m Ground clearance: 0.20 m Load capacity: 360 kg Load capacity of platform extension: 120 kg Lifting/lowering time: 54 sec. / 50 sec. Max. travel height: 9.14 m Total weight: 5,300 kg Travel speed: 0.8 km/h - 4.8 km/h Gradeability: 35% Turning radius (inside): 2.29 m Turning radius (outside): 4.88 m Tires: foam-filled, 240/55-17.5 Fedpfxs Agthgo Am Espp Max. ground pressure: 9.4 kg/cm2 Batteries: 8 x 6 V 370 Ah Hydraulic tank: 32 L Fully functional, with general signs of wear and tear.

Condition: used, functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2451488, load capacity: 360 kg, mast type: telescopic, lifting height: 12,190 mm, platform length: 2,920 mm, platform width: 1,650 mm, overall weight: 5,300 kg, transport length: 3,070 mm, transport width: 1,750 mm, fuel type: electric, tire size: 240/55-17.5, ground clearance: 20 mm, color: blue, Technical specifications Year of manufacture: 2006 Working height: 14.19 m Platform height: 12.19 m Platform height, retracted: 1.73 m Platform railing height: 1.10 m Clearance height: 2.04 m Platform dimensions (L x W): 1.65 m x 2.92 m Platform extension: 0.91 m Overall dimensions (L x W x H): 3.07 m x 1.75 m x 1.73 m Wheelbase: 2.32 m Fpjdpfj Agthcjx Am Eop Ground clearance: 0.20 m Load capacity: 360 kg Load capacity of platform extension: 120 kg Lifting/lowering time: 54 sec. / 50 sec. Max. travel height: 9.14 m Total weight: 5,300 kg Travel speed: 0.8 km/h - 4.8 km/h Gradeability: 35% Turning radius (inside): 2.29 m Turning radius (outside): 4.88 m Tires: foam-filled, 240/55-17.5 Max. ground pressure: 9.4 kg/cm2 Batteries: 8 x 6 V 370 Ah Hydraulic tank: 32 L Fully functional, with general signs of wear and tear.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 19439, pressing force: 38 t, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 80 l, pressure: 200 bar, year of last overhaul: 2023, Avermann AVOS SP-12 stationary baling container | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling container, year of manufacture 2014. This reliable Avermann baling container was overhauled by us in 2023 and has not been used since the overhaul. As a result, this is an interesting machine for anyone looking for a well-maintained used baling container that can be put back into operation immediately. The AVOS SP-12 is a robust baling container, suitable for compacting various waste streams and ideally applicable in industries, logistics companies, manufacturing companies, and waste processing plants. Technical data: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2014 Serial number: 19439 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic pressing unit Large feed opening Suitable for transport with a hook lift Specifics: The machine was overhauled by us in 2023. After this overhaul, the baling container has not been used and has been idle since. The machine is in good used condition visually. There are, of course, some minor signs of wear and tear that are consistent with the age and type of machine. Fpedpfx Asz Enubsm Ejp A great opportunity for companies looking for a professional Avermann baling container at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling container, waste compactor, container compactor, waste compaction, recycling, compactor, pressing unit, self-compacting container.

Condition: used, functionality: fully functional, Year of construction: 2013, machine/vehicle number: 2437508, power: 5 kW (6.80 HP), load capacity: 360 kg, mast type: telescopic, lifting height: 12,190 mm, platform length: 2,920 mm, platform width: 1,650 mm, overall weight: 5,700 kg, fuel type: electric, tire size: 240/55-17.5, ground clearance: 200 mm, color: orange, Technical specifications Year of manufacture: 2015 Working height: 14.19 m Platform height: 12.19 m Platform height (retracted): 1.73 m Platform railing height: 1.10 m Clearance height: 2.04 m Platform dimensions (L x W): 1.65 m x 2.92 m Platform extension: 0.91 m Overall dimensions (L x W x H): 3.07 m x 1.75 m x 1.73 m Wheelbase: 2.32 m Ground clearance: 0.20 m Load capacity: 360 kg Load capacity of platform extension: 120 kg Lifting/lowering time: 54 sec / 50 sec Max. travel height: 9.14 m Total weight: 5,700 kg Travel speed: 0.8 km/h - 4.8 km/h Fpedps Aidrksfx Am Esp Gradeability: 35% Inside turning radius: 2.29 m Outside turning radius: 4.88 m Tires: foam-filled 240/55-17.5 Max. ground pressure: 9.4 kg/cm2 Batteries: 8 x 6 V 370 Ah Hydraulic tank: 32 L Fully functional, general signs of wear and tear.

Condition: excellent (used), Year of construction: 2021, operating hours: 82 h, functionality: fully functional, KUKA KR10 R1100-2 / SEL KRC4 robot 2 units available, 1 with 135 operating hours and 1 with 82 operating hours. Year of manufacture: 10/2021 Number of axes: 6 Max. payload: 6 kg Max. working range: approx. 1100 mm Scope of delivery: Robot, controller, cables, teach pendant Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two weeks commissioning warranty. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Fpodpsz Rmi Asfx Am Ejp Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please provide country, city and postal code. Freight costs on request – please provide delivery address.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 21239, pressing force: 38 t, overall weight: 15,000 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,580 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 80 l, Equipment: documentation/manual, Avermann AVOS MPC 20 + HKV – 20 m³ | Tilting mechanism 240/660/1100 L | Cable & hook attachment | Discharge flap For sale: Avermann AVOS MPC 20 P/A/L/R + HKV compaction container, built in 2016, with a capacity of 20 m³. This robust Avermann compaction container is equipped with an integrated hydraulic lifting and tilting mechanism, making it particularly suitable for locations where roll-on-roll-off containers need to be emptied directly into the container. The tilting mechanism features a hydraulic comb attachment for 240-liter containers and a DIN attachment for 660- and 1,100-liter roll-on-roll-off containers with a flat lid. This makes the machine versatile and suitable for various types of waste containers. In addition, the compaction container is suitable for both cable and hook attachments. At the rear, the machine is equipped with a discharge flap instead of a traditional discharge door, making this version particularly interesting for certain waste streams and applications. Technical specifications: Brand: Avermann Type: AVOS MPC 20 P/A/L/R + HKV Year of construction: 2016 Serial number: 21239 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP55 Maximum working pressure: 200 bar Own weight: approx. 5,580 kg Permissible total weight: 15,000 kg Integrated hydraulic lifting and tilting mechanism Fpsdsz Ergzjpfx Am Esp Hydraulic comb attachment for 240-liter containers DIN attachment for 660- and 1,100-liter roll-on-roll-off containers Cable and hook attachments Equipped with a discharge flap Condition: The machine is currently in used condition and shows visible signs of wear and tear, consistent with its age and use. The compaction container can be delivered in its current state, but if desired, it can also be fully overhauled, sandblasted, and repainted in a color of your choice. Price in current condition: €9,000 Price fully overhauled, sandblasted, and repainted: €17,500 Due to the combination of the 20 m³ capacity, integrated tilting mechanism, and flexible container attachments, this is a very practical machine for, among other applications, industry, logistics, manufacturing companies, recycling, and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information or technical questions. Keywords: Avermann, AVOS MPC20, MPC 20, compaction container, 20m3, waste compactor, container compactor, HKV, lifting tilting mechanism, tilting mechanism, 240 liter, 660 liter, 1100 liter, DIN attachment, comb attachment, hook attachment, cable attachment, discharge flap, waste compaction, recycling.

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 38,000 kg, empty load weight: 11,820 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, Year of construction: 2006, operating hours: 9,184 h, We are selling our Bremat F2.15, manufactured in 2006, with a current operating time of 9,184 hours. The system is in good, age-appropriate condition and shows the usual signs of wear and tear. It is fully functional and ready for immediate use. Until recently, we were still using the system ourselves in our ongoing operations. The sale is solely due to the purchase of new equipment. Data & Condition: Fpedpfozu Iiyjx Am Eop Manufacturer/Model: Bremat F2.15 Year of manufacture: 2006 Operating hours: 9,184 h Condition: good, age-appropriate signs of wear and tear Fully functional and ready for immediate use Next TÜV inspection due 08/2026 A new TÜV inspection can be carried out upon request and after consultation Sale is made with the system deregistered The upper cover sheet is missing and would need to be replaced. However, this does not affect the function or operational readiness of the system. An inspection of the system is possible by prior arrangement. Further information and pictures can be provided upon request and with serious interest. The system is sold as a used semi-trailer in its current condition.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dobot Universal Robots Cobot UR10 CB3.1 3 units available Year of manufacture: 08/2017 Number of axes: 6 Max. payload: 10 kg Max. working range: approx. 1300 mm Scope of delivery: Robot, controller, cables, teach panel Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of units, weight, and desired delivery conditions. Due to the weight and size of the robot, it can be shipped within Germany for €95 gross. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify delivery address. Fodpfoz Rubtsx Am Ejpp