Used Tearing for sale (487)

Condition: used, Year of construction: 2025, Mixing rotor M80X - grain size 0 - mm Mixing paddles armored in wear zones Adapter Oilquick OQ70/55 and combined wheel loader mount for Volvo L50-120 - not included in the price – available upon request Excavators from 24 t / wheel loaders from 13 t Cutting width 1500 mm / 4 rotors Capacity 1.85 m³ Throughput / hour 64 - 95 m³/hour Fpsdpfozv Rgdjx Am Eep Working pressure 280 - 300 bar Oil requirement 150 - 200 l/min - Mixing in lime or mixing binders to dry the soil, mixing with compost, sand, other soils, etc. while simultaneously crushing soil clods. - Aerating, crushing, tearing, and turning of biomass, organic waste, and compost while simultaneously separating branches, roots, etc., that cannot be crushed. - Crushing of easily brittle rocks in construction debris such as pumice, bricks, and porous concrete, while simultaneously separating the chunks and larger, hard parts in the separator. - Feeding clumped soil onto a screening system reduces waste and increases throughput. The TSP.154 - the bearings are maintenance-free, and the chain boxes contain grease that ensures lubrication at every point through the movement of the bucket and the running of the chain. Therefore, the Terra-Star TSP.154 does not need to be re-greased and is maintenance-free. Dimensions and weight without adapter

Condition: used, mileage: 197,958 km, power: 95 kW (129.16 HP), first registration: 01/2013, overall weight: 5,300 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2012, total length: 6,400 mm, total width: 2,100 mm, total height: 2,800 mm, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Special equipment: 1 DIN slot in the front under the headliner, trailer socket 13-pole, audio system Audio 20 (radio with CD player), exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), turn signals on the front sides, roof console with reading light on driver/passenger side, entry lights, generator 220 A, additional main key, folding cover for storage compartment, steering wheel (steering column mechanically adjustable), steering wheel with multifunction including trip computer, configurable special module, spare wheel with Super-Single tire (235/65 R16), reversing warning system (audible warning signal outside), interior rearview mirror, rear wall with window, mud flaps in front, seat cover/upholstery: artificial leather (cab), seats in the cab: comfort suspension seat, driver's side, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall trim, reinforced front axle, preparation for tachograph, thermal insulation in the driver's cab, auxiliary heater (hot water) Additional equipment: Adaptive brake light, driver's airbag, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake system with ABS+ASR, headlining in the cab, lockable glove compartment, body/structure: standard double-cab pick-up, fuel tank: main tank 75 liters, headlight range control, engine 2.1 liters - 95 kW CDI CAT (2143 ccm), wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver's side), service interval indicator Assyst, heat-insulating glazing, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle Fpodpfxezwn A Eo Am Ejp Additional equipment: central locking * Auxiliary heater * Radio * Snow plow mounting plate with hydraulic quick coupler * Control for snow plow * Elevated headlights * Trailer hitch * Turning assistant * Rotating beacon +++Signs of wear and tear due to use+++Owned by a municipality since new+++

Condition: used, Year of construction: 2022, functionality: fully functional, film width: 300 mm, product width (max.): 300 mm, product length (min.): 100 mm, product width (min.): 80 mm, product length (max.): 500 mm, Equipment: documentation/manual, We offer this used PACKMAT Type S-300 bag sealing machine, manufactured in 2022. Plant No.: 750-0-0426 Year of manufacture: 09/2022 Bag packaging system for PE, PP, VCI, and Tyvek tube films up to 300 mm in width. It manufactures, prints, fills, and seals bags in a single process, with integrated thermal transfer printing. Features: ✓ Manufacturing, printing, filling, and sealing in a single process ✓ Siemens S7 PLC with touch panel, counter functions, maintenance, and setup menu Fpodpfezquxgjx Am Esp ✓ Impulse sealing system with temperature control, over-temperature protection, heating wire breakage monitoring, and cutting knife ✓ Robust construction: aluminum profile frame, closed housing, integrated work table ✓ Complete technical documentation and CE declaration of conformity Performance data: 15 bags/minute at a bag length of 300 mm Bag width: 80–300 mm (PE / PP / VCI / Tyvek) Bag length: 100–500 mm, freely adjustable Direct printing: 305 dpi thermal transfer Integrated printer: Toshiba B-SX8T, thermal transfer, 305 dpi, printing width up to 213.3 mm, speed up to 203 mm/s Also included in the scope of delivery: Remaining stock of packaging material – approx. 46 rolls of tube bags and approx. 300 rolls of ribbon. Condition: The machine is in technically perfect working order and shows signs of wear and tear consistent with its age and use. With certain bag materials, occasional restrictions may occur when opening the bags, for which no guarantee is provided. Inspection is possible by prior arrangement. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Robot Cobot Universal Robots UR5 - Year of manufacture 08/2020 Year of manufacture: 2020 Serial number: 2020350779 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Scope of delivery: Robot, controller, cables, teach pendant Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – Please specify country, city, and postal code. Fpodjzmumcspfx Am Ejp Freight costs upon request – Please specify the delivery address.

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Fpodpfx Aszx Dwnem Eep Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: ready for operation (used), functionality: fully functional, The complete BRETINOV line organizes three key stages in the spring roll production process. It includes a wrapper softening unit, a filling dispenser, and a folding and rolling table. This ensures that each part performs a specific operation before passing the product to the next station. This configuration is suitable for Asian caterers, food processing workshops, and ready-meal manufacturers. It allows for the use of rice paper wrappers and various filling recipes. Furthermore, it improves the consistency of the dispensing, folding, and final presentation. Rice Paper Wrapper Softening First, the softening unit prepares the wrappers before dispensing. It applies water and then steam to soften each sheet. As a result, the wrapper becomes easier to fold without breaking. BRETINOV positions the steam production close to the wrapper to minimize heat loss. In addition, the system precisely regulates the water supply. This step remains essential, as a wrapper that is too dry may tear. Conversely, a wrapper that is too wet becomes difficult to handle. Consistent Filling Dispensing Next, the BRETINOV P007 dispenser places the filling onto the softened wrapper. The attached plate clearly identifies this module as a P007 dispenser, version 2, manufactured in 2024. The dispensing head uses a screw to move the mixture towards the outlet. This makes it easier to control the amount dispensed. Furthermore, BRETINOV designs this system to preserve the texture of the ingredients and minimize their crushing. Interchangeable nozzles can also adjust the shape of the dispensed filling according to the recipe. Folding and Rolling of Spring Rolls Finally, the folding table receives the filled wrapper. It helps the operator or mechanical system to fold the sides and then roll the spring roll. This step improves the shape of the product and reduces variations between pieces. BRETINOV also uses air blowing systems on its automatic modules. These prevent the wet wrapper from sticking during folding. Consequently, the line facilitates the production of consistent spring rolls before cooking, freezing, or packaging. A Better-Organized Production Process Fpsdpfxozpw Ets Am Eop The three parts work in a continuous sequence. First, the softening unit softens the wrapper. Next, the dispenser places the filling. Finally, the folding table shapes the product. This organization reduces movement and repetitive gestures. Furthermore, it helps teams to better control the recipe and presentation. BRETINOV develops its lines to reduce manual operations and improve operator comfort. Technical Specifications: Manufacturer: BRETINOV Line composition: P002 softening unit, P007 version 2 dispenser, and P003 folding/rolling table P002 Softening Unit: 380 V power supply, 8 kW power, 30 L/h water consumption, automatic belt cleaning, 250 kg weight P007 Dispenser: 220 V power supply, 0.8 kW power, pneumatic power supply, 60 kg capacity, 105 kg weight, serial number S594, year 2024, CE marking P003 Folding/Rolling Table: 220 V power supply, pneumatic power supply, 100 kg weight Dimensions (L, W, H) in mm: 6600 x 1000 x 1900 EKJZH9EL

Condition: excellent (used), functionality: fully functional, color: white, overall weight: 7,000 kg, Year of construction: 2020, Equipment: air conditioning, 40-FT BITCOIN MINING CONTAINER MOBILE DATA CENTER INFRASTRUCTURE For sale is a professionally fitted 40-ft industrial container, type "HPC Mobile Pro 180U", manufactured in 2020. According to the documentation, the system was designed for up to approximately 180 air-cooled ASIC miners. Only the fitted container infrastructure is being sold. ASIC miners, GPU servers, and external power supplies are not included. Fsdpezt Sw Sefx Am Espp TECHNICAL DATA • 40-ft industrial container • Type: HPC Mobile Pro 180U • Date of manufacture: 17.06.2020 • Capacity: up to approx. 180 air-cooled ASIC miners, according to layout • Connection power: 2 × 120 kW or approx. 240 kW, according to seller • Electrical: 400 V, 3P + N + PE, 50 Hz • 4 × 250-A main switches according to electrical plans • Power distribution with Schneider Electric components • Control cabinets IP55 according to plan • Open steel rack constructions • Powerful axial fans • Inlet and outlet louvers with filter surfaces • Mitsubishi split air conditioning unit for the technology/network area • CAT cabling, patch panels, and switch infrastructure • Camera and alarm components according to documentation • Technical documentation with approximately 66 pages • Weight: approx. 7 t, according to seller • Location: 8957 Spreitenbach, Switzerland POSSIBLE APPLICATIONS Bitcoin/ASIC mining, expansion of a mining farm, hosting/colocation, use of inexpensive or surplus electricity, as well as compute, edge, test, or retrofit projects. INSPECTION AND CONDITION Used condition with typical signs of wear and tear. Functionality has not been tested. Inspection is possible and highly recommended by appointment. A sales dossier, detailed photos, video, layout, electrical, and circuit diagrams, as well as the documentation, can be provided to qualified interested parties. All technical specifications are based on available documents or seller information. Before connection and commissioning, the system must be inspected, adjusted, and approved by a qualified electrician. SALE AND TRANSPORT B2B sale ex location Spreitenbach. Loading, crane, transport, insurance, export/import, customs, permits, and commissioning are the responsibility of the buyer. No returns; liability for defects is excluded to the extent permitted by law.

Condition: new, Year of construction: 2026, CORMAK PS12E-2000 Panel Saw with Scoring Unit The CORMAK PS12E-2000 panel saw with scoring unit is a solid and precise woodworking machine designed for cutting furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its dual cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without chipping or splintering, which is essential in furniture production and interior finishing applications. Main Advantages of the Machine Dual cutting system: main blade + scoring blade – eliminates the risk of laminate tearing and ensures clean edges. Stable cast iron worktable – provides precision and rigidity even under heavy loads. Large 2000 mm sliding table – designed for cutting large-size workpieces. Powerful 3.8 kW (400V) motor – enables effortless cutting of even hard materials. Adjustable cutting angle up to 45° – allows precise bevel cuts without loss of accuracy. Precision side fence – equipped with an accurate scale for repetitive cutting operations. Dust extraction system – efficient removal of sawdust improves cleanliness and workplace safety. Complete standard equipment – includes scoring blade, measuring guides, blade guard, angle indicator, and accessories. Construction and Technology The construction of the CORMAK PS12E-2000 panel saw is based on a precision-ground cast iron table and a bearing-mounted sliding table with support, ensuring stability and full control over the material during cutting. High-quality guide rails provide smooth and accurate table movement, while the reinforced machine body minimizes vibrations. The ergonomic front-mounted control panel allows convenient adjustment of cutting height and blade angle. The blades are driven by a 3.8 kW motor, providing sufficient power reserve for demanding applications and difficult-to-cut materials. Precision and Work Efficiency The CORMAK PS12E-2000 panel saw with scoring unit has been designed for high repeatability and accuracy. Cutting depth and angle adjustments are carried out using locking adjustment knobs, increasing both safety and operator comfort. High blade speeds, including up to 5800 rpm for the scoring blade, enable fast and clean cuts without burning or damaging the material surface. Applications This panel saw is designed for: Professional woodworking workshops Furniture manufacturing companies Custom woodworking businesses Prototype production departments It is ideal for daily production, dimension cutting, and complex projects requiring precise angled cuts. It is the perfect solution wherever cutting accuracy, edge quality, and reliability are essential. Standard Equipment Main cutting blade Scoring blade Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade angle indicator Eccentric clamp User manual EC Declaration of Conformity Technical Specifications Parameter Value Sliding table length 2000 mm Cutting width on right side 1260 mm Saw blade tilt range 45° Cutting height at 45° 80 mm Cutting height with 315 mm blade at 90° 100 mm Cutting height with 300 mm blade at 90° 95 mm Maximum main blade size 315 × 30 mm Maximum scoring blade size 100 × 20 mm Main blade speed 4500 rpm Fpedpfjvuf Tmex Am Esp Scoring blade speed 5800 rpm Motor power S1/S6 3.8 kW / 6.1 HP Power supply 3-phase, 400V Weight 275 kg Warranty 12 months Technical documentation (DTR) Included CE Declaration Yes

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134, used, year of manufacture 2025. Maintenance-free, screening size 0- mm, mixing blocks M80X welded with armored wire in the wear zones. Application with mixing shafts: - Mixing in lime or binder agents for soil drying, blending with compost, sand, various soils, etc., while simultaneously breaking up soil clods. - Aerating, shredding, tearing, turning biomass, organic waste, and compost while at the same time separating twigs, roots, etc. that cannot be shredded. - Fragmenting brittle stones in construction debris such as pumice, bricks, Poroton, while simultaneously separating chunks above mm in size; larger and hard parts remain in the separator. - Feeding lumpy soil into a screening plant reduces waste and increases throughput. Equipped with Lehnhoff MS10 adapter system. Price does not include top plate. Fpjdpfjyf Atpsx Am Esp On return from rental, the machine is inspected and comes with a 12-month warranty. Suitable for excavators from 12 t Suitable for wheel loaders from 8 t Weight (kg): 1200 Throughput: 50 m³/h Drain line required: 2 Series: TSC.134.015

Year of construction: 2025, condition: like new (used), Separator Terra-Star TSC.134, used, year of manufacture 2025 Maintenance-free, screening line 0- mm, mixing blocks M80X wear zones armoured with hardfacing wire. Application with mixing shafts: Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc. while simultaneously crushing soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost while simultaneously separating out branches, roots, etc. that cannot be shredded. Crushing friable stones from construction debris such as pumice, bricks, Poroton, while simultaneously separating pieces over mm in size; larger and hard parts remain in the separator. Fpodpfxoyf Atvj Am Eop Feeding clumpy soil into a screen reduces waste and increases throughput. Equipped with OQ70/55. Price does not include adapter plate. For equipment returned from rental, the machine is inspected and comes with a 12-month warranty. For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain line connection required: 2 Series: TSC.134.018

Condition: excellent (used), Toyo Jidoki TT9-CW Rare 2 lane pouch filling and sealing machine, for tear top stand up pouches. In excellent condition direct from ultra high care factory. Perfect for packing sauces, dairy products, babyfoods, ready meals etc. Fpsdpoyzi Igjfx Am Eop

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Fpedpjyyyfysfx Am Eop Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions.

Condition: reconditioned (used), Year of construction: 1993, operating hours: 4,110 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,500 kg, Residual Wood Chipper / Wood Shredder / Slow-Speed Pusher Floor Grinder Refurbished WEIMA Model: WL10 Year of manufacture: 1993 Extraction diameter: 250 mm Motor power: 22 kW Rotor length: 98 cm Feed hopper approx. 120 x 100 cm Number of knives: 24 pcs. Knife dimensions: 30 x 30 mm Screen: 30 mm (includes second screen: 35 mm) Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2,500 kg The machine has been refurbished: - Rotor shaft newly mounted Fodpjy Ahr Hofx Am Eopp - New paintwork - Pusher floor sliding rails replaced - Oil changed - Rotor shaft overhauled (partially new knives and holders, etc.) Condition as shown in images; please also refer to the item description. Collection by the buyer is possible. All dimensions are approximate. All information given to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected by the buyer or shipped at the buyer's expense. Shipping costs are provided as a guideline; final costs may vary depending on distance and unloading options. The stated sales price is the net final amount, plus VAT. An invoice with VAT shown will be issued. Warranty basis: Due to wear and tear of used parts, the items are generally sold as defective – for spare parts only and to business buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. For new items, warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, planing width: 530 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,600 rpm, total length of planing tables: 900 mm, overall weight: 690 kg, Equipment: CE marking, documentation/manual, HOUFEK Thicknesser 530 mm | 5.5 kW | 4 Knives | Electric Lift Table | 2017 HOUFEK!! HOUFEK THICKNESSER! Professional wood thicknesser from 2017. Used machine, fully functional, ready to work. Solid construction with a weight of 690 kg ensures stability and high-quality material processing. TECHNICAL SPECIFICATIONS: - Maximum material width: 530 mm - Minimum material length: 320 mm - Working height range: 3–250 mm - Table length: 900 mm - Table width: 550 mm - Main motor power: 5.5 kW (7.5 HP) - Spindle speed: 4600 rpm - Number of knives: 4 pcs (TERSA) - Spindle diameter: 120 mm - Spindle length: 550 mm - Feed motor power: 0.58 / 0.75 kW - Feed speed: 4 / 8 m/min - Dust extraction port: 150 mm - Power supply: 400 V / 50 Hz - Machine dimensions: 1050 × 1000 × 1200 mm - Weight: 690 kg Equipment: Electric table height adjustment Mechanical table position measurement Automatic star/delta switch Segmental roller pressure Serrated feed roller Four-point table support Two feed speeds: 4 and 8 m/min CE certificate The machine is ideal for a carpentry workshop, sawmill, or company involved in the production of furniture and wooden elements. Condition: used, normal wear and tear appropriate for its age. Possible to inspect on-site. It is possible to test the machine on-site. Financing options are available through leasing or installments. The machine has been technically inspected and is ready for further operation. It is possible to start and test the machine on-site, which allows you to assess its condition and operating parameters before purchase. For the convenience of our customers, we offer financing options in the form of leasing or installments. We assist with the formalities and selection of the most advantageous financing option. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Fsdpfx Amezc U Nke Espp jbsmaszyny.pl tel: 664 335 465 tel: 530 632 386

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) Fodpfozcxbwsx Am Eepp • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, STORK TOWNSEND BBC1500W | Spine cutter (splitter / carcass saw) Manufacturer: Stork Townsend B.V. Model / Type: BBC1500W Serial number: C36E589 Year of manufacture: 2009 Fpsdpjy Umm Tefx Am Ejp Power supply: 400 V / 50 Hz / 3 phases Rated power: 1.5 kW Overall dimensions: 2100 x 1300 x 1500 mm Machine weight: 250 kg The Stork Townsend BBC1500W is a professional, automatic spine cutter, a highly specialized processing machine designed for high-volume slaughter lines and meat processing plants. This device plays a crucial role in processing pork carcasses (particularly bellies and middle pieces) and in the processing of large poultry (turkeys, geese), where the precise removal or scoring of the spine and dorsal ribs determines the classification and final commercial value of the meat cuts. The machine's mechanism is based on the automatic centering of the product within the working area. The product is fed along dedicated guides, which stabilize the carcass immediately before contact with the cutting disc, which has an optimally selected tooth profile. Thanks to a 1.5 kW drive, the device guarantees a clean, perfectly even cut without bone splinters or tearing of adjacent muscles (such as pork loin or tenderloin). The use of a mechanical cutter eliminates the heavy, dangerous, and inconsistent manual work previously performed with cleaver saws or manual splitters.

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Fpedozn Ipyjpfx Am Ejp Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Year of construction: 2022, condition: new, Robot - Belt Grinding Machine is a belt grinding machine for robotic machining with a contact wheel for grinding parts made of aluminum, steel, brass and zinc die casting. Technical data: Fpjdpfx Amegxug Ne Ejp Contact wheel: max. Ø 400 mm grinding belt length: 3500 mm grinding belt width: max. 150 mm Suction connection: Ø 160 mm dimensions (LxWxH ): 900 x 700 x 1800 mm Weight: approx. 350 kg Electrical connection: 3 x 400 V, 4 kW Compressed air connection: 6 - 8 bar Noise level: > 85 dB(A) spindle diameter: 35 mm Belt grinding unit for grinding belts max. 150 mm x 3500 mm length with pneumatic belt tensioning, belt tear control, 4 kW drive power, frequency controlled, for contact wheels max. DM 350 mm x 150 mm, drive and deflection rollers

Condition: ready for operation (used), functionality: fully functional, empty load weight: 2,580 kg, maximum load weight: 32,000 kg, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 720 mm, loading space volume: 7.5 m³, Year of construction: 2009, Platform transport trolley Brand: Plan Type: 70-4 Dimensions platform: 3000X2500/H720 mm Load capacity: 32000 kg Total dimensions: 5100x2500/H 720 MM Year of construction: 2009 Own weight: 2580kg Fpedpfx Amswarxxo Esp This trolley is double steered and has double full rubber wheels with metal rims. The triangle is removable and can also be hung on the other side of the trolley. The floor is fitted with a thick iron tear plate.

Year of construction: 2025, condition: new, Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm; suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films; suitable for dry nonwovens (airlaid, spunlaid); folds: max. 10 folds vertically and 4 folds horizontally; size of tissue, unfolded:L(40-220)xW(30-240)mm; Grammage wet wipe: 30-80g/m²; max. roll diameter: nonwoven: 1000mm, film: 350mm; filling range liquid: 0- 10ml; accuracy: +/- 0,5ml; max. speed of the machine in neutral: 110 single bags/minute (55 double bags); 5kW, 220V/380V; machine dimensions: L1000xW1500xH2000mm. Fpedpfsv Nmaqex Am Eop Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging machine for pocket tissue packs controlled through touch screen operation and PLC. Including infeed conveyor, variable speed control, very stable performance. Tearing opening in various shapes. MITSUBISHI PLC, WEINVIEW Touch Screen, Airtac Pneumatics, FUJI general power. - Specifications: bag sizes: L(70-110)xW(50-55)xH(16-23)mm; max. speed of the machine in neutral: 90 cycles/minute; power: 380V, 7.0kW; machine dimensions: L2940xW2650xH1720mm; wieght: 1500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fsdpev Nmbusfx Am Ejpp

Condition: as good as new (ex-display), Year of construction: 2025, Compact and flexible in the smallest of spaces. At a length of only 2.13 m, workpieces are finished here. Equipped with a 1.1 KW high-frequency pre-milling unit and diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cut-off unit and HF multifunction milling unit, 2 free spaces for finishing units, such as a glue scraper unit and buffing unit. Easy operation via 3.5" color touch screen. Fjdpjrrzklofx Am Espp ► Control via 3.5 inch color touch screen ► pre-milling unit with a 1.1 KW high-frequency motor with diamond-tipped spiral milling cutter in the counter-rotation ensures clean and Tear-free joining of the workpieces before the edge is banded ► Teflon-coated glue Pot with automatic stand-by function ► Automatic edge feeding with roller plate D = 600 mm for Edge material as roll goods as well as fixed lengths of 0.4 – 2.0 mm for ABS, PVC, or melamine edges ► Pressure station with 2 pressure rollers for optimal pressure of the Edge material. ► HF multifunction milling unit - suitable for radius and flush milling of the longitudinal edge, as well as for the front and rear edge of the workpiece, incl. vertical rounding of the edge ► 2 free spaces for finishing units such as glue scraper unit or buffing unit ► Workpiece chain feed with rubberized chain plates and Double Roller Upper Pressure ► Pressure bar with central adjustment and SIKO display ► Fixed workpiece support (optionally extendable workpiece support for large workpieces) ► 400 mm long infeed lineal with support ► LED lighting in the cabin (optional) ► Machining of workpieces with a thickness of 10 – 45 mm ► Feed speed 6.5 m/min ► Machine length 2130 mm 67641340f13ce

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package Fpodpfx Ajt Uzv Tsm Ejp • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: good (used), Digging bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy-duty, very stable -Width: 1220 mm -Height: 950 mm Fjdoh I Ezropfx Am Eopp -Depth: 1380 mm -Photograph: Atlas 1704, dimensions see photos -teeth of tearing -Load hook -The attachment to the spoon: can be changed by us for an additional charge. -Empty weight: 814 kg

Condition: used, functionality: fully functional, Year of construction: 2007, load capacity: 230 kg, lifting height: 17,800 mm, overall weight: 7,300 kg, transport length: 7,680 mm, transport width: 2,260 mm, transport height: 2,300 mm, fuel type: diesel, color: yellow, Equipment: UVV, all wheel drive, Industrial articulated telescopic boom lift – JLG 510 AJ Manufacturer: JLG Type: 510 AJ Year of manufacture: 2007 Technical data Working height: 17.80 m Platform height: 15.81 m Lateral reach: 9.48 m Slewing range: 360° Knuckle point height: 7.63 m Total weight: 7,300 kg Length: 7.68 m Width: 2.26 m Headroom: 2.30 m Platform size: 1.83 m x 0.76 m Platform load capacity: 230 kg Basket arm swivel angle: 145° Basket rotation: 180° Outriggers: none Drive: Diesel all-wheel drive Special equipment: All-wheel drive, oscillating axle Dates/condition UVV inspection: valid until 11/2026 Fpedett N Hvopfx Am Esp Operating hours: approx. 5,645 hours as of 03/2026 Signs of wear and tear consistent with age If you are interested, we will be happy to assist you from Monday to Friday between 07:00 and 16:00. Stated price plus statutory VAT. Subject to change and errors!