Used Tearing for sale (477)

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Dedpfo Afznuox Ai Eowd Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: good (used), Year of construction: 2019, functionality: fully functional, number of ink cartridges: 4, color channels: 4, resolution (max.): 1,200 dpi, total length: 3,400 mm, total width: 5,280 mm, total height: 1,450 mm, type of input current: AC, The printer was covered by an Enhanced Service Program (ESP) through the end of 2025. The contract was not renewed because the printer was taken out of production and placed in our warehouse after a newer model was installed. The printer was retired from service due to a production upgrade, not because of any major technical issues. During our five years of ownership, the printer delivered reliable performance with no major technical problems. Maintenance was limited to routine servicing and the replacement of standard wear-and-tear components, including filters, ink tubes, and four printheads. Before being placed into storage, the printer was inspected by an EFI-certified technician, who confirmed that it was in excellent condition. The printheads currently installed in the machine are also in excellent condition, as shown in the attached photos. The white printheads were removed because white ink was no longer required for our production needs. Since white printheads require regular maintenance even when not in use, removing them was a practical decision to avoid unnecessary maintenance and operating costs. To protect the printer during downtime, it was properly prepared for long-term storage, with storage fluid introduced into the printheads and ink system to help preserve critical components. Why this printer is worth considering: Proven reliability: Five years of ownership with no major technical issues. Dwjdpfxsza Rtae Ai Eod Verified condition: Inspected by an EFI-certified technician before storage. Well-maintained: Routine maintenance and wear-and-tear components addressed throughout ownership. Carefully preserved: The printer was prepared for long-term storage using storage fluid in the printheads and ink system. Transparent maintenance history: Clear information about the printer's service, printhead configuration, and reason for being taken out of production. This is an opportunity to acquire a well-maintained EFI printer with a documented ownership and maintenance history. Its removal from production was driven by the installation of a newer machine, making it a potential fit for a buyer looking to add printing capacity or upgrade their existing equipment.

Condition: used, functionality: fully functional, mileage: 766,000 km, power: 130 kW (176.75 HP), first registration: 04/2014, fuel type: diesel, empty load weight: 5,400 kg, maximum load weight: 2,090 kg, overall weight: 7,490 kg, axle configuration: 2 axles, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: ABS, electronic stability program (ESP), Address/Location: Street 9, No. 33, 12309 Berlin-Lichtenrade (see last picture) Djdpfx Aio Aibn He Ejwd Vehicle is fully operational and ready to drive; engine and transmission are functioning. 7m furniture van with 42m3 capacity. The vehicle has a new windshield. Vehicle shows signs of wear and tear (see pictures). Delivery is possible upon request. WhatsApp is available.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kawasaki RS05L robot with E-Controller and enclosure Control system: E-Controller Number of axes: 6 Max. payload: 5 kg Max. working range: 902 mm Year of manufacture: 12/2012 Scope of delivery: Robot, control system, cables, teach panel, circuit diagrams, floppy disk drive for data backup. Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Dwodpfxez I R D Ds Ai Esd Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify the delivery address.

Year of construction: 1994, operating hours: 43,200 h, condition: ready for operation (used), functionality: fully functional, water connection: 90 mm, machine/vehicle number: Nr. 377499, I am selling here a complete Pelton turbine with accessories, designed for use in a hydroelectric power plant with a power output of 7 kW. - Power: 7 kW - Type: Pelton turbine - Accessories included as shown in the photos - Robust structure for long-term use This unit is ideal for projects in the renewable energy generation sector. It shows the normal signs of wear and tear expected from a technical system of this type. The system is in perfect working order and ready for use. Dodpfxoz Rm R Hj Ai Eswd If you are interested or have any further questions, please do not hesitate to contact me.

Condition: used, Year of construction: 2016, Central process cooling system for injection molding – industrial cooling system / chilled water system For sale is a comprehensive industrial process cooling and chilled water system, which was previously installed in a plastics processing injection molding facility. The system served as the central chilled water supply within the plastics production and consists of several refrigeration and compressor units, heat exchangers, pump groups, water tanks, and a Siemens control system. It is designed for industrial cooling processes and can also be used in other production areas after appropriate technical inspection and adjustment. Possible applications Central chilled water supply for injection molding machines Cooling of injection molds Cooling of hydraulic and machine circuits Process cooling in plastics processing Chilled water supply for extrusion systems Industrial machine and production cooling Technical equipment MAIN refrigeration unit on a steel frame Several industrial compressor units 4 Copeland compressors, divided into two refrigeration circuits SONDEX plate heat exchanger, type S47-IG10 Year of manufacture of heat exchanger: 2016 Rated output of heat exchanger: 250 kW Heat transfer area: 33.42 m² Siemens SIMATIC HMI touchscreen control Several industrial circulation pumps Chilled water and storage tanks Pipeline system with fittings and shut-off valves Pressure and temperature monitoring Water treatment and dosing technology The refrigerants R134a and R407C are indicated on various parts of the system. Further information The system is designed as a stationary central chilled water supply and was installed in a plastics injection molding facility. The sale is from the current location. Inspection is possible after prior arrangement. Further information and pictures are available upon request. The buyer must dismantle, load, and transport the system. Location: Frechen _____ Dwedj Ah T Rtjpfx Ai Esd Subject to prior sale and errors in technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear and tear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Cobot collaborative robot Dobot CR5 – demonstration robot with Chromebook Reach: 900mm Payload: 5kg Year of manufacture: 03/2020 Serial number: 4025-6006 Dedpfsz Rmuljx Ai Ejwd Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg, and 16 kg Safe and cost-effective operation alongside humans Manual guidance, collision detection, and trajectory reproduction Ideal for application scenarios involving human-robot collaboration Multiple control methods Low latency and high immunity to interference Supports control elements on Android, iOS, and Windows High-performance network card with a transmission rate of up to 433 Mbit/s Intelligent interactive panel robot guidance The intelligent interactive panel is embedded with LEDs that display the robot's status With the touch of a button, you can pull and move the robot to teach it a specific path. Wide compatibility Broad compatibility with a variety of peripheral components Suitable for feeding, assembly, testing, handling, screwing, grinding, and gluing Multiple I/O and communication interfaces offer unlimited expansion possibilities. Adding software/API creates an open DOBOT platform on which a wider selection of accessories is compatible. Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex-works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please provide country, city, and postal code. Freight costs upon request – please provide delivery address.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compact Fanuc ArcMate 100/7L robot cell with R30iB controller, Lorch S3 pulse welding machine, new. Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 1633 mm Year of manufacture: 2016 Table surface: 750x500 mm each Dwsdpfxez I Ryro Ai Esd Overall dimensions: approx. 2500x1500x2200 mm Total weight: approx. 2000 kg Used – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Forwarding costs upon request – please specify the delivery address.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, ABB Robotics IRB 2600 20/1.65 IRC5 M2004 robot, Multimove 12-axis Number of axes: 12 Max. payload: 20 kg Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of supply: Robot mechanics, Multimove 12-axis control cabinet, teach pendant, connection cables Dwsdpfx Aiszmq S Ij Eod Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KUKA KR 240 L210-2 2000 Industrial Robot, including control cabinet 56178 The KUKA KR 240 L210-2 robot is a 6-axis robot arm with a payload of 210 kg and a reach of 2900 mm. Manufacturing applications include additive manufacturing. Common applications for the KUKA KR 240 L210-2 include: additive manufacturing, assembly, dispensing, deburring, material handling, palletizing, and remote TCP. Specifications: Manufacturer: KUKA Model: KR 240 L210-2 2000 Type: Robot arm Axes: 6 Payload: 210 kg Reach: 2900 mm Repeatability: 0.06 mm Weight: 1277 kg Control cabinet: 56178 Year of manufacture: 01/2008 Used – shows normal signs of wear and tear. Further details, article numbers and images available upon request. Dodpfsz Ru Hcex Ai Ejwd Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected on site. Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Shipping costs to foreign countries available upon request – please provide country, city and postal code. Freight costs available upon request – please provide delivery address.

Condition: excellent (used), functionality: fully functional, Granulate dryer with two drying containers, including KOCH material conveying equipment and suction lance. For sale is a used drying system for plastic granules with two drying containers and associated material conveying equipment. The system was used at an injection molding company for pre-drying PA6. Equipment and scope of delivery: Dodpfxo Afb Als Ai Ejwd - Two insulated drying containers on a common steel frame - One KOCH-TECHNIK vacuum conveying unit mounted on each container for material feeding - Large side cleaning openings with a sight glass for level monitoring - Material outlets at the bottom of the containers - Analog temperature indicators at the air connections - Separate drying unit with fan, filter, and control cabinet - Digital temperature controller GOSSEN D1 - Control panel with operating and fault indicators, as well as indicators for drying and regeneration - Existing air piping and connecting hoses - Suction lance with conveying hose The side cleaning openings provide good access to the inside of the container. Drying containers and drying unit are mounted on separate steel frames. Condition: Used, with visible signs of wear and tear due to age and use. Scope of delivery as described and shown in the pictures.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Dodez Ibduepfx Ai Eowd Technical data according to the manufacturer: With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 1,811 h, load capacity: 1,200 kg, lifting height: 3,000 mm, free lift: 150 mm, mast type: duplex, total height: 2,200 mm, Equipment: UVV, Linde L12L Electric High-Lift Pallet Truck | 1.2 t | Initial Lift | UVV Tested We are selling a Linde L12L electric high-lift pallet truck, which has been technically and visually refurbished, and features an initial lift with a load capacity of 1,200 kg. The unit will be delivered in fully functional condition, with fresh maintenance and a valid UVV test certificate. With only 1,811 operating hours, a lifting height of 3,000 mm, and the additional initial lift, this high-lift pallet truck is ideal for internal pallet transport as well as the loading and unloading of goods. The initial lift enables the additional raising of the load wheels, making it easier to overcome small unevenness in the floor and ramps. Technical data: Manufacturer: Linde Model: L12L Year of manufacture: 2008 Operating hours: 1,811 h Load capacity: 1,200 kg Drive: Electric Lifting equipment: Standard mast without free lift Lifting height: 3,000 mm Overall height: 2,200 mm Equipment: Initial lift Load wheels: Twin wheels Condition & Refurbishment: Technically and visually refurbished Fully functional and ready for use upon delivery Fresh maintenance Dedpe Ah Hdiofx Ai Eowd Valid UVV test Battery in good condition Signs of wear and tear consistent with age and use Inspection & Transport: The high-lift pallet truck is located in 53840 Troisdorf and can be inspected and tested for functionality on site after prior appointment. Transport can be arranged upon request for an additional charge. Price: €2,950.00 net, negotiable, plus applicable VAT. Gross price: €3,510.50 Sold by ZWi Technologies GmbH. If you are interested, we look forward to hearing from you or receiving your call. You can find more used forklifts and material handling equipment in our other listings.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Dobot Universal Robots Cobot UR10 CB3 Year of manufacture: 2015 Number of axes: 6 Max. payload: 10 kg Max. working range: approx. 1300 mm Scope of delivery: Robot, controller, cables, teach pendant Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT clearly stated. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Dwodpsz Rnntsfx Ai Ejd Due to the weight and size of the robot, it can be shipped within Germany for €95 including VAT. Shipping costs to other countries on request – please specify country, city and postal code. Freight costs on request – please specify the delivery address.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Compact welding cell, ABB Robotics IRB 1400, with manual rotary table and Fronius TPS 4000 welding machine. Overall dimensions: approx. 4000x2350mm Robot: ABB Robotics IRB 1400 Controller: S4-M98A Max. working radius: approx. 1450mm Payload: 5kg Year of manufacture: 1998 Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Dwsdpfez I R Rwox Ai Ejd Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address.

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Dwjdpjzilz Nefx Ai Ejd Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: not inspected (used), Year of construction: 2015, operating hours: 3,093 h, functionality: unexamined, fuel type: diesel, gearing type: hydrostat, Equipment: all wheel drive, HAKO Citymaster 600 Equipment carrier with a 2-brush suction sweeping system This HAKO Citymaster comes from a municipal owner, was manufactured in 2015, and has 3,093 operating hours according to the meter. The machine was used until recently and is in good, but unrestored, overall condition with the usual signs of wear and tear for this type of equipment. Please be aware that you must carry out a major service, including technical refurbishment, before putting it into operation! The sale is as a used machine, excluding any return, guarantee, or warranty. - Gross price €17,900 // Net price €15,042 - Inspection/test drive possible upon request! Dodps Af Uv Iefx Ai Ejwd - Shipping can be arranged nationwide; costs depend on the distance!

Year of construction: 2023, operating hours: 150 h, condition: like new (used), Type: GREMAC e2+ Year of manufacture: 2023 Location: Velbert (North Rhine-Westphalia) Operating hours: approx. 25 hours Available from: short notice, by arrangement Electrically powered rotary drum screen for separating excavated material, soil, stones, construction debris, or other screenable material, with an optional gasoline or diesel engine. Thanks to a maximum towing capacity of 3.5 tons, it can be towed by a car! Drive: Electric motors, alternatively via generator (gasoline/diesel) Dodpeygk Iwofx Ai Eewd Supply voltage: 380 - 420 V / CEE-16A Drum length: 3,000 mm Drum diameter: 1,000 mm Screen area: 9.3 m² Hopper: 1.3 m³ Weight: 3,250 kg - max. 3,500 kg Towing device: Ball hitch, tow eye (40/50 mm) Mesh size: 20 mm² Screening technology made in Germany. Designed for a long machine lifespan. The GREMAC e2+ screening plant impresses with its hot-dip galvanized frame and high-quality materials, ensuring a long machine lifespan. Machine condition: As new Includes gasoline generator MOSA GE 13054 HBS, three-phase rated power 12 kVA / 400V Warranty The seller provides a warranty for the absence of defects corresponding to the current state of technology for a period of 3 months or 150 operating hours, whichever occurs first. Normal wear and tear, or damage resulting from improper handling, are excluded from the warranty.

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. Dwjdpfx Ae Aguv Eji Ejd To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: used, Year of construction: 1988, operating hours: 66,120 h, functionality: fully functional, machine/vehicle number: 152.51.80.8xx, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 32 rpm, type of input current: three-phase, total height: 2,500 mm, total length: 2,100 mm, total width: 2,400 mm, overall weight: 3,100 kg, input voltage: 380 V, Equipment: documentation/manual, CNC milling machine Mikron WF 61 C – Heidenhain + accessories Dodpfxs Aazpho Ai Eswd We are selling a Mikron WF 61 C with Heidenhain control from our machine inventory. The machine is offered including accessories, vices, and milling chucks. Machine and equipment: • Manufacturer: Mikron • Model: WF 61 C • Control: Heidenhain • Clamping table with T-slots • Separate control panel • Protective guard in the work area Included in the scope of delivery: • Mikron WF 61 C • Vices • Milling chucks The machine shows signs of wear and tear due to age and use, as well as paint chipping. The current original photos show the visual condition. An inspection is possible by appointment. The exact scope of accessories can be discussed and agreed upon. Terms of sale: Sale exclusively to entrepreneurs within the meaning of § 14 BGB (German Civil Code). The used machine is sold with exclusion of any warranty for defects in materials and workmanship. No guarantee regarding the condition is provided. The exclusion does not apply to the extent that a defect was fraudulently concealed or a guarantee regarding the condition was given. Commercial sale with invoice. Collection and transport by arrangement.

Condition: used, functionality: fully functional, Year of construction: 2012, For sale: a Merlo ROTO 38.16 rotating telescopic handler from 2012, with 4050 operating hours. The machine is equipped with a rotating turret, a telescopic boom, four-wheel drive, and hydraulic stabilizers. Thanks to its large working range and rotating design, it is ideally suited for construction, assembly, industrial, and loading/unloading operations. Dodpfx Ao Aibblei Eowd Technical data: Manufacturer: Merlo Model: ROTO 38.16 Year of manufacture: 2012 Operating hours: 4050 hours Maximum nominal lifting capacity: 3800 kg Maximum lifting height: approximately 16 m Drive: 4x4 Type of machine: rotating telescopic handler Engine: Perkins diesel Cabin: enclosed, glazed Controls: joystick Stabilizers: 4 hydraulic stabilizers Equipment: Telescopic boom Rotating turret Pallet forks Four hydraulic stabilizers Merlo control panel Joystick for operating functions Operator cabin Work lights Technical and visual condition: The machine is used and has normal signs of wear and tear appropriate for its age and use. The telescopic boom, hydraulic stabilizers, and forks are shown in the pictures. The machine is sold with the equipment shown in the photographs.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, ABB Robotics IRB 1400 S4C robot + M2000 with Fronius Transsynergic 4000 welding machine and TC 1000 cleaner Number of axes: 6 Max. payload: 5 kg Max. working range: 1450 mm Year of manufacture: 2004 Dodpfx Asz Rk Ucoi Eewd Scope of delivery: Robot, controller, cables, teach pendant, wiring diagrams, floppy disk drive for data backup, pulse welding machine Fronius Transsynergic 4000, Fronius robot hose package. Used item – normal signs of wear and tear. Further details, article numbers and pictures available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – Please specify country, city and postcode. Freight costs upon request – Please specify delivery address.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Robot, stud welding robot for M5 threads (convertible), KUKA KR 180 KRC2, complete Control system: KRC2 Number of axes: 6 Max. payload: 180 kg Djdpfx Aisz I R R Do Eswd Max. working range: approx. 2700 mm Year of manufacture: 2003 Scope of delivery: Robot, control system, cables, teach pendant, wiring diagrams, stud welding unit Used – normal signs of wear and tear. Further details, article numbers and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT stated. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – Please specify country, city and postal code. Freight costs on request – Please specify the delivery address.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Yaskawa Motoman YR-SV3-J30 robot Controller: XRC Year of manufacture: 01/2001 Payload: 3 kg Reach: 677 mm Dwjdpfxez I R Ays Ai Esd Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. Two weeks of commissioning warranty. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries on request – Please provide country, city, and postal code. Freight costs on request – Please provide delivery address.

Condition: ready for operation (used), functionality: fully functional, total height: 1,300 mm, total width: 2,500 mm, total length: 3,500 mm, overall weight: 6,500 kg, LIDKÖPING 4B – Centerless cylindrical grinding machine For sale is a used centerless cylindrical grinding machine from the Swedish manufacturer LIDKÖPING, model 4B. The machine is designed for centerless external cylindrical grinding of rotationally symmetrical workpieces and features a grinding wheel and regulating wheel drive, as well as hydraulic adjustment devices. Technical data: - Manufacturer: LIDKÖPING, Sweden - Model: 4B - Machine type: Centerless cylindrical grinding machine - Power connection: Three-phase, 50 Hz - Grinding wheel diameter: approx. 508 mm - Grinding wheel width: 254 or 305 mm - Grinding wheel drive: 37 kW - Regulating wheel drive: 4 kW - Hydraulic drive: 2.2 kW - Machine weight: approx. 6,500 kg - Machine dimensions: approx. 3,500 × 2,500 × 1,300 mm - Separate hydraulic unit - Workpiece feeding/transport device - SKF lubrication unit - Adjustment handwheels for the machine axes - Grinding area with protective covers - Additional control cabinet Condition: Dwjdpfe Ah Si Usx Ai Eod Used industrial machine with signs of wear and tear, paint chipping, and visible corrosion spots due to age and use.