Used Temporary Structure for sale (3,260)

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h Itjdpfx Apszw T Sxo Dsn * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2216, Demag ELV Hall Crane, Portal Crane, Bridge Crane, incl. steel structure with floor-mounted control Dimensions of steel structure approx. 22.5 x 8.9m with 1x Demag bridge crane 3.2 tons - gauge 8.55m Payload/lifting capacity 3200KG, 3.2t Technical data of the system: Crane track/steel structure consisting of HEB280 beams (running rails) with 8 U200 supports. Beams were cut flush with the floor, as they were cast into the concrete. Length of steel structure approx. 22.55m Overall width (outer edge of steel structure) approx. 8.9m Overall height of crane approx. 4.75m Top of running rails approx. 4.3m Bottom of running rails approx. 4.0m Top of bridge approx. 4.75m Bottom of bridge approx. 4.33m Itedpfx Asz Tdbnep Den Hook height approx. 3.6m Gauge approx. 8.55m Support spacing: See sketch (Left 6.75 + 6.75 + 7.8 - center to center) System will be delivered complete: Steel structure / supports made of U240, running rails HEB300 incl. power rail/power supply 1x single-girder crane with 3200kg Demag PLV wire rope hoist with floor-mounted control Crane is dismantled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection only by prior appointment

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. Itedszvhlkspfx Ap Dsn MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). Itjdpfx Asz Ad Dcsp Dsn 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: used, functionality: fully functional, mileage: 30,103 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 21,535 kg, maximum load weight: 4,465 kg, overall weight: 26,000 kg, tire size: 385/65 R 22,5 u. 315/80 R 22,5, axle configuration: 6x6, wheelbase: 4,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, Vehicle number # 30103 Euro 6 D TN cab with 1 bed 6 x 6 all-wheel drive Wheelbase 4,500 mm Leaf spring suspension Tires 386/65 R 22.5 and 315/80 R 22.5 Body dimensions (inside): 3,800 x 2,480 x 600 mm (bulkhead 1,300 mm) 390 liter tank Differential lock Mechanical 8-speed split transmission Air conditioning Auxiliary heating PTO Cruise control Traction control FASSI F 455 RA 2.26 loading crane JIB preparation V20 cable winch Hydraulic 4-point outriggers Front outriggers Heated driver's seat MAN Multimedia System Advanced Navigation system 2-point electric rear view mirror Heated exterior mirror Rearview camera MAN BrakeMatic 3-stage engine brake Fifth wheel coupling Rockinger trailer coupling Duomatic/Standard Diesel particulate filter Sun visor Rotating beacons Roof hatch LED daytime running lights Itsdpfx Apswmdg Uo Dsn Work lights 5 pairs of lashing eyes 4 large tool boxes 2 small tool boxes Headlight range adjustment Multifunction steering wheel On-board computer RIO box Off-road gear reduction ABS Offroad Climbing brake Left roller blind Drum brake Leasing or financing available upon request!

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Itsdpfx Apszvhkyj Djn

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, machine/vehicle number: DN2349, Demag hall crane, portal crane, single-girder crane, including steel structure with floor control. Dimensions of the steel structure approx. 7.5 x 4 m with 1x Demag bridge crane, 2 tons. Payload/lifting capacity: 2000 kg - 2 tons. Technical data of the system: Crane track/steel structure consisting of HEB160 and IPE300 beams. Length of steel structure approx. 6 m Length of running rails approx. 7.5 m Total width of steel structure approx. 4 m Total height of crane approx. 4.64 m Top of running rails approx. 4.4 m Bottom of running rails approx. 4.15 m Hook height approx. 3.2 m Base plates at the supports approx. 40 x 40 cm. System is delivered complete: Steel structure/supports made of HEB160 (embedded approx. 10 cm), running rails IPE300 incl. power rail/power supply. 1x single-girder crane with 2000 kg Demag PK10 chain hoist with floor control. Itedpfjz Tdb Uox Ap Don Crane is disassembled and immediately available. The location of the item is 75053 Gondelsheim. Very good condition, see pictures. Shipping by freight forwarder or collection by appointment only.

Condition: used, Year of construction: 2020, functionality: fully functional, load capacity per storage section: 500 kg, Price: Make a serious offer. Ijdpjz Tdhnofx Ap Dstn Mezzanine, 760 m² storage platform Very nice industrial mezzanine from 2020, in excellent condition, completely disassembled, labeled, and palletized for easy and quick reassembly. Main features: Area: 750 m² Dimensions: Approximately 45 m x 17 m (see plan) Allowable load: 500 kg/m² Floor covering: very high-end grating Height under structure (under steelwork): 4.50 m Height on floor level (on steelwork): 5.00 m Column spacing: approximately 4.3 m x 5.8 m Condition and packaging: Entire assembly in very good condition Disassembly carried out carefully by professionals All elements are numbered. Labeling and assembly plans provided. Assembly ready Stored on pallets Loading onto your truck is free of charge Price: €45,900 (excluding VAT)

Condition: new, Year of construction: 2023, No. 04377 Brushing and structuring machine VOLPATO SPO 600 Year of construction 2023, new, immediately available, made in Italy VOLPATO has been building grinding machines for over 60 years Working width 600 mm Machine open at the side for double pass and double grinding width of 1200 mm Electric height adjustment of both units independently of each other Maximum grinding height 330 mm (360 mm) depending on brush diameter both brushes tilt 0-10° (20°) Maximum diameter of brushes 320 mm Brush rotation infinitely adjustable 180 - 600 rpm Change of direction of rotation of the brushes possible Electric height adjustment 0 - 330 mm with Siko indicators Brushes are stored on round bars with a diameter of 90 mm each with linear guides Infinitely adjustable feed speed of the conveyor belt Table height thanks to adjustable feet 800-850 mm Suction nozzle 2 x 180 mm EMERGENCY STOP BUTTON Motor power of the grinding units 2 x 4 kW Motor power of the conveyor belt 0.55 kW Table dimensions 2000 x 860 mm Includes 1 steel wire and 1 Tinex plastic brush, each 250 mm diameter, 80 grit NET WEIGHT 700kg CE declaration of conformity Operating instructions in English Brush units inclined up to 20 ° with respect to the direction of movement = when the wood rusts, the veins are also highlighted transversely thanks to a helical action of the brushes Iedsqrtv Repfx Ap Djtn The machine has 3 inverters, one for adjusting the belt speed and 2 for the brush units = many finishing configurations available Double direction of rotation of the brushes 4kW motors with belt transmission giving double torque to the brush units The images serve as an example and represent an identical machine Transport dimensions approx. 2100 x 1300 x 1900 mm LWH Weight 750kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold in AS IS condition According to the manufacturer, the warranty is 1 year after delivery Technical information, condition description, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is “bought as seen”. Terms of payment: Prices plus VAT, payment before collection or shipping Delivery conditions: ex warehouse or location

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 4.000mm nett belt width 600 mm adjustable speed sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 6.000 x 2.200 x 2.200 mm with oil circulation pump Full mechanical overhauling: New screen filter for internal oil filtration New bearings, chains, seals, slide bushings, gears, … Motors/gearboxes completely overhauled or new replaced Oil bath fully re-insulated Itedpfxjz Ucwks Ap Dsn New grill belts, standard dimensions for snack products (to be discussed depending on product and customer specifications) All wear-sensitive parts replaced or fully refurbished General cleaning, overhaul, and structural inspection Full electrical overhauling + update of electrical cabinet and control: All electrical components and cables replaced OEM TST PLC control system or conventional push-button control system with Jumo PID temperature controller New electrical diagrams (E-Plan) New sensors Component and cable coding

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Itodpfxjz Ng Nyo Ap Don Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: used, Year of construction: 2011, operating hours: 13,600 h, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Iodpfx Ajz I Du Aep Djtn Complete with manuals and CE certificate.

Condition: good (used), axle configuration: 3 axles, first registration: 11/2005, loading space length: 133,590 mm, loading space width: 2,520 mm, color: red, Equipment: ABS, - Air suspension Rear axle 1: Double tires; Steerable Rear axle 2: Double tires; Steerable Rear axle 3: Double tires; Steerable Unladen weight: 16,050 kg Payload: 31,950 kg GVWR: 48,000 kg Technical condition: good Optical condition: good # NOOTEBOOM MCO-48-03V 3-AXLE TELESCOPIC SEMI-LOW LOADER / EXTENDABLE / HYDRAULIC STEERING / 48 TONS NOOTEBOOM MCO-48-03V 3-AXLE TELESCOPIC SEMI-LOW LOADER YEAR OF MANUFACTURE 2005 FIRST REGISTRATION 01.11.2005 CHASSIS NUMBER XMRMC000050000480 NOOTEBOOM MCO-48-03V SEMI-LOW LOADER - 3-AXLE SEMI-LOW LOADER - DOUBLE TELESCOPIC / TWICE EXTENDABLE - HYDRAULIC TWO-CIRCUIT STEERING - FOLLOW-UP STEERING - EBS BRAKE SYSTEM - TIRE SIZE 235/75 R17.5 - TECHNICALLY PERMISSIBLE MAXIMUM SPEED 80 KM/H - TECHNICALLY PERMISSIBLE TOTAL WEIGHT 48,000 KG - PERMISSIBLE TOTAL WEIGHT ACCORDING TO VEHICLE DOCUMENTS 42,000 KG - UNLADEN WEIGHT APPROX. 11,120 KG - PAYLOAD APPROX. 30,880 KG AT 42,000 KG TOTAL WEIGHT - TECHNICAL AXLE LOAD 3 X 10,000 KG - FIFTH WHEEL LOAD 18,000 KG DIMENSIONS ACCORDING TO TECHNICAL DRAWING - WIDTH 252 CM - MAXIMUM DIMENSION HK–AZ 2,533 CM - LENGTH DIMENSION 1,223 = 2,533 CM - LENGTH DIMENSION 953 = 2,263 CM - LENGTH DIMENSION 961 = 2,271 CM - ADDITIONAL LENGTH DIMENSION 823 CM - FIRST TELESCOPIC EXTENSION CM - SECOND TELESCOPIC EXTENSION CM - TOTAL EXTENSION LENGTH 1,310 CM - LOADING HEIGHT APPROX. 91 CM (+7 / −12 CM) - SUPPORT LEG HEIGHT ACCORDING TO DRAWING 93.5 CM (+7 / −12 CM) - RADIUS R 175 CM - RADIUS R 235 CM - REAR AXLE DISTANCES CM - DIMENSION OF AXLE GROUP 262 CM FURTHER DIMENSIONS ACCORDING TO TECHNICAL DRAWING - 125.5 CM - 31 CM - 120 CM - 270 CM - 78 X 25 CM - 70 CM - 2 X 30 CM - 63 CM - 15.7 CM - DETAIL DIMENSION 31 X 6 CM CONTAINER DIMENSIONS ACCORDING TO DRAWING - 1 X 20 FT + 30 CM - 1 X 40 FT + 30 CM VEHICLE DIMENSIONS ACCORDING TO REGISTRATION DOCUMENTS - VARIABLE OVERALL LENGTH APPROX. 1,335 TO 2,675 CM NOTE: THE TECHNICAL DRAWING AND THE VEHICLE DOCUMENTS USE DIFFERENT MEASUREMENT POINTS AND DIMENSIONS. WEIGHTS AND PAYLOAD - TECHNICALLY PERMISSIBLE TOTAL WEIGHT 48,000 KG - PERMISSIBLE TOTAL WEIGHT ACCORDING TO REGISTRATION 42,000 KG - UNLADEN WEIGHT APPROX. 11,120 KG - PAYLOAD APPROX. 30,880 KG - TECHNICAL AXLE LOAD 10,000 KG PER AXLE - FIFTH WHEEL LOAD 18,000 KG FEATURES VERY INTERESTING NOOTEBOOM MCO-48-03V 3-AXLE TELESCOPIC SEMI-LOW LOADER WITH TWO TELESCOPIC EXTENSIONS OF CM AND CM. EQUIPPED WITH A HYDRAULIC TWO-CIRCUIT STEERING WITH FOLLOW-UP STEERING. THANKS TO THE DOUBLE TELESCOPIC FUNCTION AND THE HYDRAULIC STEERING, THIS SEMI-LOW LOADER IS PARTICULARLY WELL SUITED FOR THE TRANSPORT OF LONG, HEAVY AND BULKY LOADS. IDEAL FOR: - CONSTRUCTION MACHINERY TRANSPORT - HEAVY TRANSPORT - LONG GOODS TRANSPORT - STEEL STRUCTURES - INDUSTRIAL TRANSPORT - SPECIAL AND HIGHLOAD TRANSPORTS Iodpj Aay Rdofx Ap Dotn - OVERLENGTH AND BULKY LOADS THE ACTUALLY PERMISSIBLE WEIGHTS AND DIMENSIONS DEPEND ON THE VEHICLE DOCUMENTS AND THE APPLICABLE LEGAL PROVISIONS. ALL INFORMATION WITHOUT GUARANTEE. THE ORIGINAL VEHICLE DOCUMENTS ARE THE DECISIVE FACTOR.

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm Isdpfsdd Hi Eox Ap Dotn machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2026, We offer roll-off containers in various sizes, custom-made to your specifications. Color: RAL color of your choice Delivery throughout Europe Dimensions: 40 cbm 7000 x 2380 x 2400 mm Other dimensions are possible! Itsdpfxjzg Ipqo Ap Djn 4.0 - 7.0 m x 2.38 x 2.4 m Reinforced design with side “belly bands” Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Bottom: 5 mm Walls: 3 mm Crossbar: INP 180 Rounded transition between bottom and wall -End profile made of round tube -Door lock, Holland + model -Side central locking -All-around tarpaulin and net hooks -Access ladder on the front -Primed once inside, double coated outside -Double coated, solid color paint on the outside in the desired RAL color Optionally available: -Advertising panels -Spar distance 50 cm -Cross spars -Mounting bracket Ø 60 mm -Roll cover -Steel cover with winch / hydraulics -Net system for covering / securing the load -Access ladder on the rear door -Additional spars / belly band -French flap -Swing flap -Grain slide

Condition: used, Year of construction: 2021, CNC MACHINING CENTER Morbidelli N100 KEY FEATURES "BUMPERS": THE PERFECT COMBINATION OF SAFETY AND PRODUCTIVITY "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS AXES Morbidelli N100 12 Morbidelli N100 15 Morbidelli N100 18 Morbidelli N100 22 Working area in X-Y-Z axis * mm 2486-1255-150 3686 TECHNICAL DATA -1555-150 3686-1860-150 22-31 = 30862185-150 22-43 = 42862185-150 Travel X-Y-Z axes mm 3120-1685-250 4320-1985-250 4320-2285-250 22-31 = 37702585-250 22-43 = 49702585-250 Traverse speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area No. 4 Vacuum pump (Opt.) m³/h 250/300 DRILLING UNIT Vertical spindles No. – RPM 7 (4X-3Y) 8000 – 12 (8X-4Y) 8000 Horizontal spindles (Opt.) No. – RPM 4 (2X-2Y) 8000 – 6 (4X-2Y) 8000 Integrated saw blade in X (Opt.) Ø mm – RPM 125 – 10000 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed RPM 24000 Lateral tool changer 8 positions 10 positions 11 positions 13 positions INSTALLATION Installed power kVA 23÷28.5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/s 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 1950 2200 2500 22-31 = 2550 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage only electrospindle or electrospindle + drilling unit: diameter 200 mm; Extraction air requirement 3,400 m³/h In conjunction with the strip for panel ejection, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC machining center for processing panel materials. Self-supporting structure and work table Box construction made of cold-rolled steel, consisting of rectangular sections welded together; multifunctional work table made of aluminum with a single working area. Holes in a grid of 120 mm for vacuum connection, easily removable via a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be machined. Moving gantry It is a gantry structure made of cold-rolled steel in a box construction, consisting of rectangular sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a quick-change tool system of type HSK63F. Travel of the gantry and aggregate carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides by means of pre-tensioned ball screws. The movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive. The movement of the aggregate carrier in the Z direction takes place via pre-tensioned ball screws. Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servo motors and digital control units. CONTROL The control unit consists of a numerical control. Iodpfx Asz Iyvpsp Dotn

Condition: good (used), Year of construction: 1993, Sheet metal storage system, Stopa, 491 storage locations for sheet metal 1.30 x 2.50m and 1.50m x 3m, – used: Price ex works: €65,000 (net), plus dismantling, etc. Manufacturer: Stopa Type: SLBS 3000 UL (Serial No. 93449) Year of manufacture: 1993 / Modifications in 2013 (Retrofit) and 2019 Storage height: 6,400mm Width (without attachments): Overall: 5.26m, Front: 5.17m Length: approx. 60m Sheet metal format Front: 1,300 x 2,500mm Sheet metal format Overall: 1,500 x 3,000mm Load capacity per pallet: 3,000kg Storage locations Front: 359 Storage locations Overall: 132 No existing cassettes: to be clarified 35 towers / bays Storage capacity: 1,473t Over the years, various punching/laser cutting machines have been connected to this storage system, i.e. machines with an interface to the storage system. Manual bending presses and deburring/grinding machines do not have an interface to the storage system. The loading and unloading stations are controlled via the storage management system and moved manually from the storage location to the desired position. 2013 > Retrofit modification: 4.1 Key aspects of this modification: 4.1.2 New main control panel with control computer 4.1.3 Data transmission to the stacker crane (RGB) via data light barrier 4.1.4 Lifting mechanism with two new Profi-Bus rotary encoders for height positioning, which monitor each other. 4.1.5 Encoder of the traverse for the telescopic fork was replaced with a Profibus-compatible rotary encoder 4.1.6 Control cabinet of the RGB was completely renewed 4.1.7 New circuit diagrams for the RGB and the I/O modules were created. 4.1.8 The safety technology was not changed 4.1.9 The speed of the axes (longitudinal travel, lifting mechanism, fork) was not changed. 4.1.10 The drives on the RGB and the controllers in the stationary RGB cabinet were converted to asynchronous servo motors with frequency converters. 5) 2015 > Connection of Trumpf L3030 to our distribution line 2 5.1.1 Key aspects of this modification: 5.1.2 Modification of station 4 and 6, loading and unloading side was swapped 5.1.3 Modification of safety interfaces of station 4 and 6 from 1 to 2-channel 5.1.4 Trumpf L3030 LiftMaster connection 6) 2017 > Order for Retrofit expansion concept, stage 1-3 6.1 Key aspects of expansion stages 1-3 (implemented by 08.2018) 6.1.2 Stage 1: Connection of the new TruLaser 3030 Loadmaster to VT 1 with modification of loading and unloading station 3 (Overall and Front) 6.1.3 Stage 2: Modification of the steel structure blocks from Front to Overall (28, 30, 32, 34, 36), relocation of stations 19 and 20 including update of the station control from Siemens S5 to S7 including 56 flat pallets Overall 6.1.4 Stage 3: Update of the station controls to Siemens S7 without VT1 and VT2 7) 2018 > Order for Retrofit expansion concept, stage 4-5 7.1 Key aspects of expansion stages 4-5 (planned implementation April – June 2019) 7.1.1 Stage 4: 7.1.2 Dismantling of the STOPA storage SBLS tower 1 and tower 2 (in-house work) 7.1.3 Modification of distribution line 1 and 2 7.1.4 New distribution trolley 1 7.1.5 New control for distribution line 1 and 2 7.1.6 Stage 5: 7.1.7 New storage management software STOPA WMS 4.0 DYNAMIC The modification of expansion stages 4 – 5 will be carried out without any significant changes to the system and on the basis of the updated safety measures. Itjdpfx Ajz Tdywjp Djn Condition: good Available: immediately Location: Germany, NRW PDF plan available – we will gladly send it upon request!

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. Isdpo Aaw Utofx Ap Djtn The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: used, mileage: 125,000 km, power: 84 kW (114.21 HP), first registration: 12/2017, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,945 mm, total width: 1,993 mm, total height: 2,725 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Volkswagen Crafter MAXI with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 standard * 2nd owner (1st owner was Volkswagen, with a day registration) * Service booklet available * M1 passenger car registration Equipment: MAXI version * 7 seats * Electric step * Auxiliary heater (air) * Parking distance control front + rear * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2350 KG * Payload: 1150 KG * Trailer load: 2000 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer license plates (5-day/ customs registration) usually on the same day Isdozbw I Hepfx Ap Djtn * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters and other expenses that you shouldn't have to worry about. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special features: Audio system RSD 2000 (speakers in the front), exterior mirrors electrically adjustable and heated, rear turn signals (roof), grab handle on the B-pillar, driving assistance system: parking aid front and rear, Isofix mounts for child seat in the rear seat, headrests in the rear adjustable in height/tilt, spare wheel in driving condition, mud flaps in the front, seats in the driver's cab: double passenger seat, seats in the cargo/passenger compartment: 1st row, 3-seater bench, narrow, seats in the cargo/passenger compartment: 2nd row, 3-seater bench, reinforced front axle, additional heater. Additional equipment: Storage compartments: luggage net on the rear tailgate, storage compartments: shallow tray/compartment, above the windshield, airbag on the driver's side, anti-slip control (ASR), exhaust pipe straight to the rear, floor covering in the cargo/passenger compartment rubber, roof lining, driving assistance system: brake assistant (HBA), chassis: reinforced rear shock absorbers, suspension: comfort suspension in the rear, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, window in the cargo/passenger compartment: - fixed, center left, window in the cargo/passenger compartment: - fixed, center right, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, additional noise reduction (driver's cab), rear wing doors with glazing, heated rear window, body/structure: standard high-roof station wagon, body variant: high roof, headrests in the front adjustable in height/tilt, marker lights on the side, model update, engine 2.0 liters - 84 kW TDI, wheelbase 4325 mm, tire pressure con

Condition: like new (used), Year of construction: 2017, Price from location dismantled, packed and loaded: Iedsm Dr U Sjpfx Ap Djtn Partial quantities can be purchased! We reserve the right to a minimum purchase! Manufacturer: Profielnorm B.V. Type: storage platform Year of construction: 2017 Floor area: approx. 1440 m2 Platform load: for main and side corridor 500 kg/m2 for folding door 1000 kg/m2 Floor height (top edge of floor covering): 3.880 mm Bottom edge of beam: 3.530 mm Axle distance: according to drawing Platform covering: grid support Stairs: 6 pieces Folding door (automatic): 6 pieces Condition: very good Available: immediately Location: Hungary/Budapest Plan of the stage: upon request

Condition: used, Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, The used KONDIA HM-1060 high-speed vertical machining center is a medium-sized, numerically controlled machine with a cast iron gantry structure, weighing approximately 7,300 kg. It has travels of X 1,000, Y 600, Z 510 mm, a table size of 1120 × 600 mm, and a load capacity of 660 kg, with rapid traverse rates up to 24 m/min. It features a cast iron structure with support on 3 points for improved thermal compensation, a SELCA 4045 CNC control with a color LCD, a network interface, a hard disk, and a BT-40 spindle at 10,000 rpm, cooled by a dedicated chiller. It also includes an 18-position pick-up tool changer, a remote handwheel, and a conveyor chip evacuator. Itodpfxoz I Dvas Ap Djn Year of manufacture: 2006, complete with manuals and certification.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, SEPRO S5-25 med – Linear robot with complete automation peripherals | Year of manufacture 2024 For sale is a SEPRO S5-25 med linear robot from the year 2024, including extensive automation peripherals for plastic injection molding production. The system is in very good, well-maintained condition and is fully functional. The linear robot was used in combination with a KraussMaffei KM 200-700 C2 injection molding machine and serves for the automated removal, handling, and further processing of plastic molded parts. Technical data: - Manufacturer: SEPRO Robotique - Model: S5-25 med - Year of manufacture: 2024 - Type: Linear robot / Demolding robot - Electrical power: max. 1.5 kVA - Operating voltage: 3 × 400–480 V (±10 %) - Frequency: 50/60 Hz - Short-circuit strength: 10 kA - CE marking: present - Condition: very good, used - Functionality: fully functional Automation equipment according to plant documentation: - SEPRO S5-25 linear robot - Mounting console and support structure - Conveyor system for part transport - Protective enclosure with safety devices - Fall-through chute - QA drawer for quality control - Safety interlocks and emergency stop devices Possible applications: This automation solution is particularly suitable for plastic injection molding, automated parts removal, and, with appropriate adjustments, for other industrial handling and transport tasks. Due to its recent year of manufacture (2024) and extensive peripherals, the system offers an interesting opportunity to expand or modernize existing production capacities. Itodpfxez Sn Amo Ap Den Inspection is possible by prior arrangement. We will gladly provide further technical information, images, and details on the scope of supply upon request. Note: The KraussMaffei injection molding machine mentioned on the CE type plate is not part of this offer. The SEPRO automation, including the agreed-upon peripherals, is being offered. However, the injection molding machine can be found in a separate offer and can also be purchased optionally upon request.

Condition: used, Application: cutting Breton cakes Articulated element conveyor Horizontal product transport Conveyor with straight and curved sections Cutting station under a transparent enclosure Vertical work unit above the conveyor Metal structure on adjustable legs Legs with floor support pads Electrical control cabinet Control buttons on the front panel Emergency stop on the electrical cabinet Isdsz S Nfiepfx Ap Detn Visible pneumatic hoses SCHMERSAL safety component Apparent sensor reference: BNS 33-12Z Sensor protection rating: IP69K Standard indicated on the sensor: IEC 60947-5-3 Maximum sensor voltage: 100 V AC/DC

Condition: like new (used), Year of construction: 2023, Used System Year of Manufacture: 2023 Condition: Like new, very few operating hours Features and Technical Specifications: ECO JET DUO 6 XL ZRS stationary clean air filtration system for extracting wood dust and chips Fans: 2 x 7.5 kW Airflow: 10,000 m³/h Vacuum: 2,700 Pa (total) / 2,200 Pa (static) 80 filters, each 2.50 m long, BIA Category M, electrically conductive, including support baskets Filter area: 77.6 m² Filter area load: 129 m³/(m² x h) Filter cleaning: AL-KO OPTI-JET® Pressure relief areas: 0.84 m² (rupture discs) Base structure with feed hopper and rotary valve; dry conveying with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm spacer ring to raise the unit, with 2 intake openings Base unit with feed hopper and ZRS 960/1 FG rotary valve for chip disposal via a customer-supplied transport fan into a silo or similar; transport line DN 200, approx. 1,260 mm, connection to be provided by the customer Rotary valve ZRS 960/1 FG: - ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (unit for indoor/outdoor use); EX D; FSA 11 ATEX 1614X - Motor: 0.18 kW / 0.78 A, 3-phase / 400 V / 50 Hz - Protection class/design: IP 54 / B3; Insulation class F - Speed: 41 rpm; Flow rate: 15,744 l/h*; 7 cells - Inlet/outlet: 960 x 250 / 960 x 208 mm - Dimensions: 1,100 x 605 x 330 mm; Temperature range: up to 50 °C Additional features: - 400 mm suction inlet with check valve in rectangular duct Iedpfszlbqrox Ap Dotn - ECO JET backflow check valve 910 x 346 x 500 mm AL-KO Control System ACS II: - Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage, and integrated frequency converter for cascade connection of up to 2 fans up to 37 kW with frequency converter interface - Plain-text error messages on the display, as well as a collective error message and indicator light; manual start of discharge via display button and cleaning via button; cleaning start via differential pressure; Post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval indicator; control cabinet lighting and ventilation; monitoring/evaluation of fire damper, residual dust sensor, fill level sensor, and maximum filter pressure - 10 individually controlled solenoid valves - Gate valve control in groups of 4 for up to 8 machines: control via potential-free contact (PFC) or induction coil; 24 V DC shut-off valves, motor-driven with single-wire control or electropneumatic; max. 4 plates per conveyor line - ZRS power module up to 0.18 kW; time parameters adjustable via touchscreen - Rupture disc sensor and evaluation unit; pressure transmitter for frequency converter; pressure cells; strobe light; 2 x PTC thermistor evaluation; rotation monitoring of the rotary valve - 24 V DC exhaust/return air switching for summer/winter operation - Filter monitor/residual dust monitoring with evaluation unit in accordance with DIN EN 12779 and H3: If 0.3 mg/m³ is exceeded, a self-holding alarm is triggered and the recirculation damper switches to exhaust air - 10-terminal junction box, 24 V/230 V, fully wired for filter cleaning, including approx. 6 running meters of cable - Ducting system including elbows, branches, reducers, PU hoses, machine connections, small parts, and EP dampers for exhausting 11 woodworking machines 1 HRS according to specification - Return air system in accordance with TRGS 553, with changeover damper and fire damper - Galvanized base fra...

Condition: used, Layher AR O-Grid Decking 2.07 x 0.32 m – robust work and walking platform Used Layher AR O-grid decking for use within the Layher Allround scaffolding system. The open grid structure provides a robust work and walking platform and allows water and dirt to drain easily. Suitable for intensive professional use in construction, renovation, industry, and maintenance. 🔧 Specifications Brand: Layher Type: Allround system Design: O-grid decking Dimensions: 2.07 x 0.32 m Condition: Used ✅ Advantages Original Layher Allround quality Robust work and walking platform Open structure for drainage of water and dirt Suitable for intensive professional use Itedpfx Apj Aawikj Dsn Easy to combine with other Layher Allround components Application Suitable as a work and walking platform within Layher Allround scaffolding structures. The grid decking provides a stable base for working at height and can be widely used in professional scaffolding setups.