Used Test Station for sale (351)

Condition: used, Technical specifications (manufacturer/model type – without guarantee): Peak force: “according to manufacturer specifications” approx. ≈ 10 kN Max. acceleration: “up to approx. 1,000 m/s²” Max. speed: “typically in the range of approx. 1 m/s to a few m/s” Components: - Control cabinet TGA 022/3 - Vibration exciter SW 6507 - Power amplifier TG D 9000-000.00 - Blower Condition: used Scope of delivery: Vibration test system as shown (Subject to change and error in technical data!) For further questions, we are happy to answer your call. Crodextdl Iopfx Al Rec

Condition: used, Type: POWER SWING 20 kN Sincotec Resonance Testing System Power Swing 20 kN Manufacturer Service Performed General Information: For sale is a used resonance testing system Power Swing 20 kN from Sincotec Test Systems GmbH. The test bench was operated in single-shift use, with all maintenance carried out regularly by the manufacturer. Key Features: - Robust design for continuous operation - Precise resonance testing up to 20 kN - Manufacturer maintenance included - Ideal for research, testing, and development applications Technical Data – Test Bench Feature / Value - Overall height of test bench: 1215 mm (without clamping device) - Width of test bench: 2005 mm - Depth of test bench: 1205 mm - Maximum force amplitude: 10 kN - Maximum total force: ±20 kN - Measurement transducer accuracy: min. Class 1 (according to DIN EN 10002-3) Technical Data – Control Cabinet Feature / Value - Overall height of control cabinet: approx. 1800 mm - Table top height: 1080 mm - Width of control cabinet: 650 mm (narrow table top) / 1450 mm (wide table top) - Depth of control cabinet: 700 mm (narrow table top) / 800 mm (wide table top) - Weight: 152 kg (small table top) 187 kg (large table top); with granite plate: 247 kg Site Requirements Feature / Value - Required space: 4.3 × 3.0 m - Required ceiling height: 2.5 m Cedjxrffajpfx Al Rorc - Floor load capacity: 234 N/cm² Power Requirements Feature / Value - Voltage: 400 V three-phase AC with neutral and protective earth - Phase rotation: clockwise sequence - Voltage fluctuation: ≤ ±10 % - Short voltage dips: < 20 ms - Limits for continuous interference: interference class A according to VDE 0871 - Frequency: 50 Hz ± 1 % - Protective earth / ground resistance: < 0.3 Ω Connection and Fusing Feature / Value - Power supply: 400 V / 50 Hz (clockwise phase sequence) - Connector: CEE plug, 5-pin, 16 A - Fuse rating: 16 A Test bench weight: approx. 3.6 t Max. weight of clamping device: 250 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical specifications!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss climate chamber water-cooled (test room explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST ROOM Technical data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock Height 1995 mm, width 1090 mm, depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, width 1000 mm, depth 1660 mm Test room capacity: approx. 600 liters Cold / heat operation -70 to 180°C Climate operation 10 – 95°C Humidity 10...98% r. H. Temperature change per time Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A On-site fuse: 32 A slow-blow Permissible test item weight Total load of the grate supports 80 kg Test room floor 80 kg, grate insert 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The air conditioning system's evaporator has been replaced) For your safety as a buyer, the following information! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components Cjdpov Ewy Hsfx Al Rjrc 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Crsdevzz A Rjpfx Al Rsc Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 3050 Modules / Test Chamber Temperature Chamber Air-cooled Test chamber capacity 500 litres Temperature range -30°C / +100°C Temporal temperature fluctuation K ±0.5 Spatial temperature fluctuation K ±1.5 Temperature gradient K 3 Change rate Heating K/min 2.0 Cedpew S E N Tefx Al Rsrc Cooling K/min 1.4 Heat compensation max. W 650 Calibration values +23°C +80°C Test chamber dimensions Width 710 mm Depth 590 mm Height 1250 mm External dimensions Width 940 mm Depth 1030 mm Height 1955 mm Sound pressure level db(A)

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Crodew I Rxrjpfx Al Rsc Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Here we offer a Weiss emission test chamber. Mini - SHED for Diurnal Loss Measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (Usable 1600) mm. Housing dimensions: Width 1760 mm x depth 3100 mm x heights 2790 mm Max. floor load 250 kg Operating range +18 °C ...+45 °C, (at higher temperatures SHED operation is only possible without Tedlar bag) Temperature range +18 °C ...+45 °C Temperature constancy ≤ ±1 K (temporal) Temperature change rate, (heating and cooling) approx. 0.5 K/min., without test material Duct connection (air inlet and outlet) ∅ 80 mm, in chamber rear wall Shut-off valve, gas-tight (air inlet and outlet) ∅ 80 mm, gas-tight, pneumatic operation Delivery limit: connection flange of shut-off valve Cooling water consumption approx. 0.8 m3/h Voltage: 230/400 V; 3 PH + N + PE; 50 Hz Rated power: 4,1 kW Rated current: 14,0A Weight: approx. 2500 kg type: WT 5,1'/ + 18-45 Cedpfx Asmfny Iol Rerc Condition: used / used Sale ex location Scope of supply: (Only the Weiss emission test chamber WT 5,1'/ + 18-45 Mini-SHED) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VTS³ 7018-5 Water-cooled Test chamber dimensions: Width 580 mm x depth 450 mm x height 750 mm Housing dimensions: Width 900 mm x depth 1550 mm x height 1850 mm Temperature test: Temperature range: -70°C to +180°C Temperature change rate: Heating 7.5 K/min Temperature change rate: cooling 7.5 K/min Test chamber volume: 190 liters Nominal voltage: 400V Rated current: 20 A Rated power: 9 kW Weight: approx. 540 kg Refrigerant: R404A and R23 The following information is for your safety as a buyer! Cjdpfxsn E Sk Ee Al Rsrc The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss temperature test chamber Here we offer a Weiss temperature test chamber. Weiss temperature test chamber water cooled Technical data: Test chamber designation: WT1-600/70 Outer dimensions without hinges and door lock height 1980 mm, width 1085 mm, depth 1655 mm Codpfxeirmg Ae Al Rorc Internal dimensions height 950mm, width 800mm, depth 800mm Test chamber capacity: approx. 600 liters cold / heat operation -70 to 180°C Temperature change per time cooling approx. 2,5 K/min Heating up approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible test material weight Total load of grate supports 80kg Refrigerant: R 404A +R23 Weight: 600kg Type: WT1-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Zwick Type: BT1-FR050TH.A1K 50 kN Universal Testing Machine Zwick/Roell BT1-FR050TH.A1K Material Testing Machine – Precise Strain Gauge Testing Note: PC not included!! Highlights: - Test force: 50 kN (tension/compression) - High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-wire) - Measuring range: 0.2 – 165% of nominal value, data acquisition up to 500 Hz - Maximum resolution: up to 297,000 points (at 50 Hz) Csdpfx Alew S Hvzj Rjrc - Positioning repeatability: ±10 µm - Crosshead speed: 0.0005 – 600 mm/min - Robust construction - Compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth - Low noise: 59 dB(A) - Ambient conditions: +10 to +35 °C, humidity 20–90% Special features: - Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: - Test force (tension/compression): 50 kN - Load frame height: 1,714 mm - Overall height: 1,814 – 2,688 mm - Load frame width: 760 mm - Overall width: 936 mm - Load frame depth: 477 mm - Overall depth: 722 mm Weight: - With electronic unit: 230 kg - With typical accessories: approx. 300 kg Condition: used Scope of delivery: (see picture) - ZwickRoell BT1-FR050TH.A1K testing machine - Operating manual (Specifications are subject to change and errors excepted!) If you have any questions, we are happy to answer them by phone.

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Cjdpofnm Dqjfx Al Rerc Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, IMV Type: i240 + SA3AM Power Amplifier + Fan Dimensions Power Amplifier: SA3AM.i40 W x H x D 1234 x 997 x 720 mm Credpfxew H N U Ds Al Roc Vibration Exciter: i240 W x H x D 580 x 1950 x 850 mm Technical Data: Armature Mass: 20 kg Armature Diameter: 290 mm Armature Resonance: 2300 Hz Permissible Eccentric Moment: 850 N·m Frequency Range: 0-2600 Hz. Maximum Force: 24 kN (sine and random) 48 kN (shock) Maximum Acceleration: 1200 m/s² (sine) 840 m/s² (random) 2400 m/s² (shock) Maximum Displacement: 100 mm p-p. Maximum Load Capacity: 400 kg. Ambient Conditions: Temperature 0-40 °C, Humidity 0-85 %RH. Maximum Output Power: 30 kVA (SA3AM-i40) + Shaker Armature 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3AM-i40) Total weight approx. 2800 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) For further questions, please contact us by phone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Cjdpfswc Nvgex Al Rjrc Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Csdjrivfcepfx Al Rorc Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Lindner Bursting Test Stand Here we offer a Lindner burst test stand. AGB Bursting Test Stand TMM4 Technical data: AGB Bursting Test Stand TMM4 Year of manufacture 2015 Cjdolx A T Depfx Al Rjrc Rated voltage: 3/N/PE AC 400V Rated power: 5,5 kW Temperature range chamber: RT ... 180°C Temperature range medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: glycol / water Heat transfer oil Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz power: 5,5kW rated current: 8A Back-up fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY For the commissioning of the burst test bench the following items are necessary: Pump, cooling tower & fire alarm panel these are not supplied. Type: AGB burst test rig TMM4 weight approx. 705 kg Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock test system Working climate area Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions Width 1100 mm Height 2300 mm Depth 2300 mm Test chamber dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) Crjdpfjtqcu Esx Al Rjc (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! Csdpfx Aleun Rv Ne Rerc The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: Crjdpfx Asvba Raol Rjc water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation in time K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Cedsuxq T Djpfx Al Rerc Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a TIRA temperature test chamber. TIRA temperature test chamber air-cooled The chamber has the option for an external test box with external sensor connection can therefore also be used as an external temperature control unit. Temperature range -20°C...+140°C Temperature stability over time ± 0.1°C...± 0.3°C External dimensions Width 860 mm x depth 1500 mm x height 2100 mm Test chamber dimensions width 601 mm x depth 545 mm x height 692 mm Electrical connection 400V +6% / -10% 50Hz 3P+N+PE Rated current: 10.0 (max.17) A Rated power: 5.2 (max.9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S The following information is for your safety as a buyer! Crsdenyh T Sepfx Al Rec The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Here we offer an Espec(ThermoTec) stress test chamber. Overpressure humidity tests at over 100 degrees in many different modes Program capacity of 10 patterns with 30 steps per pattern Codpfx Asn Arznel Rjrc A variety of protection mechanisms; overheat/overpressure protection, detection of water- supply failure.Complete door interlock and temperature sensor. Saturated Temp Range 105 to 142.9°C Unsaturated Temp Range 105 to 132.9°C Humidity range 50 to 100% r.h. Nominal pressure 0.196 MPa at 132.9°C and 100% e.F. External dimensions: width 740 x height 1553 x depth 1000 mm Test chamber dimensions: Width 355x Height 355 x Depth 426 mm Other equipment: with rails and grid Test material connections in the interior Type: EHS-221M Scope of delivery: See pictures 300 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climatic test chamber Technical data: Test chamber nominal volume 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width 2970 mm Height 2370 mm Depth 1530 mm Rear wall Minimum insertion dimensions: Width 2970 mm Height 2390 mm Depth 1550 mm Test chamber: Width 2000 mm Height 1000 mm Depth 1000 mm Double-leaf door, clear width Width 2000 mm Height 1000 mm Heated viewing window, 2 pieces Width 500 mm Height 600 mm Feed-through opening, 1 side panel left ∅ 75 mm Credpok E Hnqjfx Al Rsc Temperature range: -40...100°C Climatic range: 10...95°C Temperature difference, temporal ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in the supply air without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 %r. F. Humidity difference, temporal ≤ ± 3.0 %r. F. Dew point range, temporary down to -5... 95°C Refrigeration system: water-cooled semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Air conditioning and dryer refrigeration system air-cooled /hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical mains connection: 400V 3/N/PE.AC,50Hz Mains plug: CEE 5-роlig, 32 A, with 5.0 m cable Max. simultaneous power requirement 10.0 kW Supply line fuse: 3x 25, Char, C A Degree of protection IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch shock test chamber Crsdpfxen Avcus Al Rec Here we offer you a Vötsch shock test chamber. Water cooled Temp. range -80C to +220C Hot chamber +50 to +220 Medium chamber -10 to +90 Cold chamber -80 to +70 Mains voltage 400V +-10% 3/N 50Hz Rated current 30.5 A Rated power 13.5 KW Refrigerant VK : R 404A 3.00kg p*: 25bar Refrigerant TK : R23 15bar p* : 25 bar Condition: used / used Type: VT 7012 S3 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature test chamber Here we offer a temperature test chamber. Weiss temperature test chamber water cooled Technical data: Csdpsiqk Abofx Al Rsrc Test cabinet designation: WT-600/70 Outer dimensions with hinges and door lock height 1995 mm, width 1090 mm, depth 1660 mm Outer dimensions without hinges and door lock height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Test chamber capacity: approx. 600 liters cold / heat operation -70°C to 180°C Temperature change per time cooling approx. 2.5 K/min Heating up approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on site: 32 A slow blow Permissible test material weight Total load of grate supports 80kg test chamber floor 80kg, insert grate 40kg Refrigerant: R 404A/R23 Weight: 675kg Type: WT-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a temperature shock test cabinet. White Temperature Shock Test Cabinet Air Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) Csdpfxelgux Ae Al Rorc (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.