Used Universal Testing Machine for sale (96,938)

Year of construction: 1963, condition: not inspected (used), functionality: unexamined, machine/vehicle number: 1762, Universal Testing Machine UHP 60 – Losenhausenwerk Düsseldorf-Grafenberg For sale is a Universal Testing Machine, type UHP 60, manufactured by Losenhausenwerk A.G., Düsseldorf-Grafenberg. This machine was originally produced in the 1960s and is a classic testing device for tensile, compression, bending, and shear tests on metallic and non-metallic materials. Technical Data (according to original documentation): - Max. static test force: 60 t - Max. dynamic test force: 40 t - Test pressure: approx. 235 bar - Stroke height (piston extended): approx. 3865 mm - Total weight: approx. 2500 kg - Foundation pressure: approx. 5400 kg/m² - Grip separation: 0–1000 mm - Working cylinder diameter: 180 mm - Max. piston stroke: 235 mm - Lower grip adjustment speed: up to 750 mm/min - Grip width: 80 mm (max. opening 40 mm) - Compression plate distance: 150–400 mm - Compression plate diameter: 230 mm - Bending support distance: up to 1000 mm General Information - Year of manufacture: 1963 - Serial number: 1762 - Year of acquisition: 1963 - Grip separation: up to 1000 mm - Bending test: support distance 50–1000 mm - Shear test: 15 mm Ø specimens Condition The machine comes from a laboratory inventory, is complete, and was stored in working condition until recently. Due to its age, it is sold as untested and without warranty. Special Features - Robust industrial quality, made in Germany - Includes original documentation, type plates, and machine record - Ideal for collectors, museums, or restoration purposes 💡 Collection preferred (due to weight, approx. 2.5 t). Godpjxvp H Aefx Ah Eokd

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM10 Force: 10 kN cross beam stroke: 700 mm Installation space: 400 mm total height: 1230 mm Weight: ca.85 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 10kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps. Gedpfx Ahed R Dpmo Eekd

Condition: used, Year of construction: 2007, functionality: fully functional, total width: 1,200 mm, total height: 3,100 mm, overall weight: 850 kg, type of input current: AC, input voltage: 230 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, Well-maintained Zwick Roell universal testing machine mounted on a base with safety door, including load cell, extensometer, controller, and additional tooling for clamping flat tensile specimens. Supplied without specimen holders and threaded inserts. Test space dimensions: 640 x 1935 mm. Software: testXpert II with master test protocol for tensile tests, declaration of conformity, and CE marking. After powering off and on, an error occurs indicating the extensometer cannot be addressed; this can be resolved by unplugging and reconnecting the interface cable. Otherwise, the machine functions perfectly and remains DAkkS calibrated until January 2026. Gsdpfx Aexrdbtjh Eekd

Condition: excellent (used), Zwick/Roell Zwick/Roell 1456 RetroLine Universal Testing Machine 20 kN For sale is a high-quality universal testing machine from the renowned manufacturer ZwickRoell, model 1456 RetroLine, year 2023, with a nominal force of 20 kN. The machine was completely upgraded to state-of-the-art technology as part of the RetroLine modernization and is ready for immediate use. The machine is in very good condition, has been modernized, and complies with all current standards. It is ideally suited for tensile, compression, bending, and shear tests in research, development, and quality assurance. Technical data: Make: ZwickRoell Model: 1456 RetroLine Year of manufacture: 2023 Nominal force: 20 kN Test space dimensions: Height 900 mm, Width 420 mm Drive: Electromechanical spindle drive Speed range: 0.001 – 1000 mm/min (depending on model) Measurement accuracy: ± 1% according to ISO 7500-1, Class 1 (optionally 0.5) Control system: testControl II Software: testXpert III Equipment: Replacement head Cabinet (protective / soundproofing) Evaluation unit included For the ZwickRoell 1456 RetroLine with 20 kN, the approximate values (depending on configuration and equipment, e.g., cabinet, evaluation unit) are as follows: Dimensions Overall height: approx. 1.8 – 2.0 m Width: approx. 600 – 800 mm Depth: approx. 600 – 800 mm Test space (installation height/width): 900 mm × 420 mm Weight: Base machine: approx. 250 – 350 kg With cabinet and evaluation unit: up to approx. 400 – 450 kg Condition: used Scope of delivery: (see picture) - Zwick/Roell 1456 RetroLine testing machine (20 kN) - Protective / soundproofing cabinet - Interface card for force transducer - Operating and technical documentation (PDF & printed) Inspection by arrangement possible. Shipping or collection by arrangement. (Specifications and technical data subject to change and errors excepted!) Gkjdpew U N Rtefx Ah Eod Further questions can be answered by phone.

Condition: used, Universal Static Material Testing Machine AllroundLine with Two Test Spaces Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type 1474 / 01 Year of manufacture: 1984 / 2003 Type: 01 . 96255/03 . 112137 Design: Universal Testing Machine Test force: 100 kN (10 t) Test area height: 1460 mm Test area width: 430 mm Traverse path max.: 1200 mm Test speed max.: 250 mm/min Power supply: 400 Volt, 50 Hz (L1/PE/N) Rated current: 10 A Motor power: 4.4 kW Interface: RS485 - Control system retrofit in 2003 - For tensile, compression, and bending tests on material samples, components, and assemblies - Data output via RS485 - 1 load cell for measuring compressive and tensile forces included. The machine is sold without PC and software; only the installed load cell is included in the scope of delivery. Gedpfx Aoxantcoh Eokd Required floor space (W x D x H): 1150 x 800 x 1960 mm Weight: 820 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 2009, 1 Universal Testing Machine Type H 10 KM Used device with Windows 11 software for tensile, compression, and bending tests; comes with one pair of wedge grips up to 10 kN and a certificate for tensile and compression displacement measurement. For testing in tension, compression, shear, bending, etc. • This is a dual-spindle benchtop model. • The machine complies with DIN 51220 and 51221, Class 1. • Digital display for force and displacement, 4½ digits, with peak value memory. • Five-range automatic switching for force and displacement measurements. • Digital speed adjustment from 0.5 to 1000 mm/min in increments of 0.1 mm. • Break detector and automatic return function are standard features. Gjdpexghlfjfx Ah Eskd • Driven by a precision servo motor with high-frequency chopper control unit and digital feedback for load-independent, constant speed. • Quiet operation thanks to toothed belt drive and ball screw spindles with bellows cover. • Fully computer-controllable via RS 232 interface. Max. load: 10 kN in tension and compression Max. travel: 1150 mm without grips Force measurement: Strain gauge Measurement principle: Temperature-compensated Displacement measurement: Built-in optical encoder, 0.01 mm resolution Power supply: 220-250 V, 50-60 Hz Power consumption: 1.0 kW Dimensions: Height 1575 mm, Width 635 mm Clear width of frame: 410 mm Weight: approx. 95 kg Includes: 10 kN load cell and certificate for force and displacement.

Year of construction: 2025, condition: as good as new (ex-display), Stand-alone machine, max. testing force 200 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, Machine price WITHOUT clamping device as the final equipment is based on your requirements: included in the price: - Machine in working order - incl. load cell 200 kN (grade 05 from 2000 - 200,000 / grade 1 from 400 - 2000 N - Warranty 24 months - Software LabTest - meets and exceeds all expectations - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - Druckplatten plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers Gkedpfx Ahscyamwj Ejd - High temperature / hot draft furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Year of construction: 2025, condition: new, Universal testing machine PM50 Force: 50 kN cross beam stroke: 1200 mm Installation space: 400 mm Gjdpfxsd R Dp Ee Ah Eokd Overall height: 1817 mm Weight: ca.380 Kg Travel resolution: 0.01 mm Testing speed: 0.03-1000 mm / min Return speed: 1000 mm / min Force transducer: 50 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: used, Zwick Type: Z20 Technical Specifications: Stroke: 200 mm H x W x D 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Clip-On Extensometer 13.5 mm MFA 25 Extensometer (Temperature range up to +200°C) Computer + Software testXpert II V3.5 Air Conditioning Unit: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Temperature change: 1 K/min Refrigerant R404 5 kg Condition: Used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to change or errors in the technical data. Information is subject to change.) Subject to change without notice!) We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax. Gkedpfxev Rdtwj Ah Eed

Condition: used, Static Universal Testing Machine AllroundLine with two test chambers Tensile Testing Machine, Compression Testing Machine ZWICK / ROELL Type AllroundLine Z010 / TH2S Year of manufacture: 1996 Model: BZ010TH2S . 132583/96 . 406678 Design: Benchtop testing machine Test force: 10 kN (1000 kg) Test chamber height: 1458 mm Test chamber width: 440 mm Crosshead speed: mm/min Drive travel resolution: 0.0625 µm Repeatability accuracy: ±2 µm Motor power: 500 W Power supply: 230 Volt, 50 Hz Gkedpfxoxanrxj Ah Esd Rated current: 3 A Power consumption: 800 VA Interface: RS485 - For tensile, compression, and bending tests on material specimens, components, and assemblies - Equipped with TH2S control unit (machine controller) - Data output via RS485 - 1 piece load cell for measuring compression and tensile forces, AST Type KAF-W (Angewandte System Technik GmbH, year 2013) The machine is sold without PC and without software, only the described load cell is installed. Space requirement (W x D x H): 1000 x 650 x 1920 mm Weight: approx. 220 kg Good condition

Year of construction: 2024, condition: new, machine/vehicle number: H3000-H5000TM, Universal testing machine H3000TM-H5000TM according to DIN EN ISO 7500 The universal testing machine of the H3000TM-H5000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor controlled and has a membrane keypad. The 2-line LCD display shows the force and travel. The testing machine can be used as standalone or with a PC via USB interface. The displacement is measured by means of an encoder 0.01 mm visible resolution on LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travels, 500mm or 1200mm (without load cell and testing tool). Gjdpfx Aoiq Hxksh Eskd Further scope of delivery: One load cell up to nominal load, 220 Volt cable, USB cable, description, CE declaration of conformity. For more information, please refer to the attached description. Load cell 3000N-5000N Measuring range: 5-5000N tension and compression, with nom. 2mV/V output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate Long travel extensometer HE 900mm measuring travel, measuring arms motorized, including electronics Accuracy class class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optical incremental Measuring path 900 mm , minus measuring length Display error 6 µm or 2 Resolution 1 µm Actuating force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo adjustment is manual Measuring arm opening and closing is motorized specimen diameter 0-30 mm specimen thickness 0-30 mm sample width 0-100 mm Weight approx. 32kg Scope of delivery strain gauge complete with electronics Cutting edges round: 1 set each carbide / rubber wear parts measuring blades optional rectangular cutting edges ATTENTION: When using optional cutting edges a readjustment of the lo a readjustment of the lo stop is necessary.

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 50 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results (demo machine for special price) The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 50 kN (quality class 0.5 from 500 - 50000 N) - warranty 24 month - software LabTest - unique performance - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. Setup, training and DAkkS calibration Gkjdpsptcmjfx Ah Eod Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Gksdpfefdzupsx Ah Esd Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), GALDABINI Type: Quasar 50 / Nominal Capacity: 50 kN with PC, monitor, and GraphWork 5 testing software Universal Testing Machine The "QUASAR" universal testing machines are designed as single-room testing machines and essentially consist of the following components: Machine frame. The design and structure of the machine load frame is designed where necessary for the specified maximum loads: Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servo motor, and recirculating ball screws. Load measuring system with load cell suitable for tension and compression. Electronic control unit that performs all functions: Regulation and control, monitoring, and recording of the output signals of the measuring amplifiers for force, strain, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; The analog signals are acquired by an A/D converter with 20-bit resolution. The electronic control system is usually located in the base of the machine. This also applies to most of the electrical components of the drive and power supply. The operator interface is connected to the PC via an RS232 serial interface with a high transmission speed of 38400 baud. Rigid two-column system with a maximum capacity of 50 kN. Suitable for metals, plastics, composites, and other materials. Stylish design and advanced features. Flexible and modular design for easy future expansion. Key technical advantages include extremely high resolution of load and stroke values, as well as a minimum test speed of 0.0005 mm/min for the highest performance and most accurate results. Technical specifications: Nominal capacity: 50 kN Gjdpev Tywqefx Ah Eokd Speed at maximum load: 0.0005÷200 mm/min No-load speed: 500 mm/min Distance between clamps: 1000 mm Total stroke: 1000 mm Crosshead travel resolution: 0.1 µm Positioning repeatability: 2 µm Distance between wedge clamps: 480 mm Clearance between columns: 410 mm Unit of force Newton - daN - kgf - Ibs Dimensions: Height: approx. 1548 mm Width: approx. 700 mm Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting during use: 300 lux Weight: approx. 255 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2024, condition: new, Universal testing machine H50TMCI / 900 Watt mechanical construction: according to DIN EN ISO 7500-1) 2 backlash-free ball screws, drive via AC servo motor, Fmax = 50 kN, stiffness 65 kN/mm 1 working area up to nominal load: working area width: 510 mm (optional widening: +240mm / +530mm) max. test stroke without test tools, adapter and KMZ: 1095 mm (optional extensions: +250mm / +500mm) Gkjdpfx Ahoiq Hxce Eod Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 800 mm/min at full load Return speed 800 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2025, condition: as good as new (ex-display), Max. testing force 10 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional Gododb Nf Ispfx Ah Eskd - incl. load cell 10 kN (quality class 0.5 from 100 - 10000 N) - warranty 24 month - Software LabTest - unsurpassed flexibility, meets and exceeds your expectations - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!

Year of construction: 2025, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Gedod R Dpuepfx Ah Eokd Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. Capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. Stroke: 700 mm (without fixture) Test speed: 0.1-500mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping jaws: 0-7 mm Weight: approx. 175 kg Gkjdpjr Ixq Rjfx Ah Eed Dimensions (WxDxH): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: H50KS, tractive force with load: 50,000 N, Universal testing machine, type H50kS up to 50KN for tension and compression Load cell 50KN 10KN 1KN and Windows software 8-9-10-or 11 for tension, compression, bending, shear etc., according to EN ISO 7500-1, ASTM E4 The H50kS is a universal testing machine developed according to the latest standards. The machine operates in accordance with the relevant radiation protection and safety directives in the EC. (EN 50081-1, 72/23/EEC, EN 61010-1) The maximum voltage within the machine is 48 volts. Special features - large, easy-to-read liquid crystal display with backlighting - Graphical or numerical display mode - alpha-numeric file input - speed range 0.001 to 500 mm/min. - high return speed 0.001 to 500 mm/min. - exact crosshead positioning - Robust load frame - Output report of results with mean value and standard deviation via printer - Large selection of test software under Windows for various standards - RS232 interface mode for use with computer system - Accuracy of load cell force display 0.5 % over the entire range - Displacement display accuracy 0.001 mm - Equipped with a force and displacement alarm system - 32bit motor controller - 20% digital weight blanking during load cell capacity check - Automatic motor alarm in case of over or under voltage and overheating Gkjdpoq Ruw Nsfx Ah Esd Specifications: - Force measurement accuracy +/- 0.5 % of the displayed force in the range 2% to 100% - Accuracy of position measurement +/- 0.01 % or 0.001 mm - Speed accuracy +/- 0.005 % of the selected speed - Operating temperature 0 to 38°C - Humidity range 10% to 90% Technical data: - Two-spindle table model - maximum load 50kN in tension and compression - maximum stroke 1100 mm without clamping fixtures - for further details please refer to the brochure Dimensions: Height: 1613 mm width: 720 mm Depth: 500 mm Weight: 140 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Year of construction: 2025, condition: as good as new (ex-display), QUASAR 1200 kN tensile testing machine / universal testing machine most modern WINDOWS software (freely programmable test procedures), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - Machine in working order - incl. load cell 1200 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - Warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - Mechanical clamping device - Hydraulic clamping tool - Bending tools - comression plates - Clip-on extensometer - Probe arm extensometer - Video extensometer - Laser speckle extensometer - Climate chambers - High temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines. Gjdpfx Asdb Ndcjh Eskd

Condition: used, Zwick Type: Z30 Technical Specifications: Total Height 2114 mm Width 748 mm Depth 580 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Clip-On Extensometer 13.5 mm Gjdpsv Rn Ifjfx Ah Ejkd Clip-On Extensometer 40 mm Computer + Software testXpert II V3.5 Condition: Used Total Weight Approx. 500 g Scope of Delivery: (See Image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone. Written orders can be placed by email or fax.

Year of construction: 2024, operating hours: 4 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: H2,5TMNI, Universal testing machine H 2,5 TMNI L Please always send your mail address. mechanical construction: Single spindle universal testing machine with backlash-free ball screw in C-frame design with spindle protection and brushless drive motor, Fmax = 2.5 kN 1 working chamber up to nominal load: Working chamber depth: 105 mm max. test stroke without test tools, adapter and KMZ: 1375 mm max. test area height (between lower fixed and moving crosshead) without test tools, adapter and KMZ: 1375 mm Travel speeds: Test speed 0.005 - 1200 mm/min up to nominal load return speed 1200 mm/min Gkjdpfemdn Trsx Ah Eod Force measurement: Measuring range depending on the force sensor used 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of the force measurement depending on the integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DAkkS calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Year of construction: 2025, condition: as good as new (ex-display), Max. Test force 100 kN, most modern WINDOWS software (freely programmable test sequences), over 600 finished test results, machine price WITHOUT clamping device - final equipment according to your requirements Included in the price: - machine in working order - incl. load cell 100 kN (grade 05 from 1000 - 100,000 / grade 1 from 200 - 1000 N - warranty 24 months - Software LabTest - unsurpassed flexibility, complete software (!) - without clamping tool Gedpfx Ascxwq Roh Ejkd - without delivery (distance-dependent) - incl. DAkkS (DKD) calibration Optional: - mechanical clamping device - hydraulic clamping tool - bending tools - compression plates - clip-on extensometer - probe arm extensometer - video extensometer - laser speckle extensometer - climate chambers - high temperature furnaces ... just everything that is necessary for mechanical material testing up to the LASER TECH (optical laser speckle strain gauge for non-contact strain measurement of metal, plastic ... Ask also for other sizes. We offer new machines on the quality level of the market leader at prices of used machines.

Year of construction: 2018, condition: good (used), functionality: fully functional, machine/vehicle number: H3000TM, Universal testing machine H3000TM Made in Germany Crosshead stroke: 520 mm Working area depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm / min Return speed: 500 mm / min Travel resolution: 0.01 mm We have a very large selection of clamping fixtures - screw clamping fixtures - wedge clamping fixtures - pneumatic and hydraulic clamping fixtures. Gkodpfxjt Rg H Ao Ah Ejd Pressure plates-bending fixtures-friction fixtures and much more. Strain gauges-extensometers-long displacement transducers-clamp-on transducers-clamping chambers. Force transducers optionally 50N-100N- 200N- 500N- 1000N- 2000N- or 3000N incl. Hess software Windows 8-9-10 or 11 for universal test sequences, simple tests even without a PC and a 5KN SP 56g screw clamp with pyramid or rubber jaws 30x50 mm Factory calibration certificate with DAkkS calibrated measuring equipment. In tension and compression direction in 10 steps. The universal testing machine of the H3000TM series is a single-spindle machine, a robust construction made of aluminum and V2a with ball screws, ball bushing guides and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a membrane keypad. The force and travel are shown on the 2-line LCD display. The testing machine can be used as a standalone unit or with a PC via a USB interface. The displacement is measured using an encoder with 0.01 mm visible resolution on the LCD (internal 0.0001mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally it is possible to add a second channel for a second load cell or a displacement transducer. The universal testing machine is manufactured with two different travel ranges, 500 mm or 1200 mm (with load cell without test tool). Additional scope of delivery: A load cell of your choice 50N-100N-200N-500N-1000N-2000N or 3000N, certificate 220 volt cable, USB cable, description, CE declaration of conformity. Load cell 3000N Measuring range:1-3000N tension and compression, with nom. 2mV/V Output signal, overload protection: +/- 100%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, reproducibility: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate

Year of construction: 2025, condition: new, Max. testing force 5 kN, actual WINDOWS software (free programmable testing procedure) more than 600 ready prepared testing results - demo machine for special price The machine state is as new. Gkodpfsdb Nfpex Ah Ejd Price of machine is without clamping heads (shown on the photo) because this equipment will be delivered as option according to your requirements. Price includes: - Machine 100 % functional - incl. load cell 5 kN (quality class 0.5 from 50 - 5000 N) - warranty 24 month - software Graphwork 6 (actual) - without clamping heads (as option) - without costs for delivery (depending on distance) - incl. setup, training Optional: - clamping heads - bending support - compression plates - extensometer - climatic chamber Even everything for to perform standard test procedures or according to you company requirements up to high performance testing equipment like MICRON LASER SPECKLE (optical Laser Speckle extensometer for non contact measuring of elongation for metal, plastic and other... Please ask for different machines with higher / lower forces, special equipment or applications: We offer new machines with highest quality and best price ratio at fair prices! Photos shows machine with optional equipment!