Used Tilting Spindle Moulder for sale (16,078)

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm Lsdpfx Afstty Nksusrt -Electrical data: 380V; 43A; 22kW

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Dough pieces from 50g to 2000g. Retactable belt. Belt dimensions 700mm W x 29mm L Lrsdowt Tnhjpfx Afust

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Lrodpfsz Ag A Iox Afuot Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Lodpez Ag Anjfx Afusrt Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Lredpfxoz Ag Abo Afuet Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Ljdpfx Asz Agz Defuert Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Lrodez Agzqspfx Afuot Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Ljdpfx Aoz Agzdefuort Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Spindle circle diameter: 270 mm Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Ledez Agy Hspfx Afuort Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: good (used), Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Spindle press: Hand spindle press -Pressure: max. kg -Stroke: 60 mm -Intermediate dimension: 200 mm -Dimensions: 1020/600/H1520 mm Lsdpfx Afsz Egh Tjuert -Weight: 120 kg

Condition: good (used), Hollow spindle stop Lrodpfx Aodbc E Nsfuet Diameter 125 mm Weight 6.6 kg

Year of construction: 2010, condition: excellent (used), Arbor tool in a wooden case Manufacturer: IGP Arbor mounting: Mk 4 Maximum arbor extension: 200 mm Weight: 6.8 kg Ledpfx Afjf Dx Srsuort

Condition: used, Grinding spindle Manufacturer: FAG Dimensions of the tapered mounting arbor: Diameter 80 - 61, length 100 mm mounting arbor Diameter min. 68, length 70 mm Diameter max. 80, length 70 mm Lrodpfxsc Tuxdo Afuet min. 61, length 100 mm max. 80, length 100 mm Length 500 mm Diameter 200 mm Weight 100 kg DX9UK3MUZNK

Condition: excellent (used), High frequency spindle Make Precise Type SC 60121 Lodpfxju Numvj Afuort Speed 7500 - 30000 Hertz 250-1000 Volt 88-250 13 kw Diameter 120 mm Total length 420 mm Weight 22 kg

Condition: like new (used), Spindle support bearing Manufacturer: Union Overhang: 600 mm Spindle diameter: 130 mm Lsdodvvtljpfx Afusrt

Condition: excellent (used), Year of construction: 2016, operating hours: 33,250 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC-620, overall weight: 8,500 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 3/5-axis machining center Manufacturer: Spinner Type: VC-1150 Year of manufacture: 2016 Control system: Heidenhain TNC-620 Operating hours: approx. 33,250 h S/N: VTXXXX Technical parameters: ----- • Travel ranges X-Y-Z: 1,150 x 620 x 600 mm • Work table: 1,400 x 620 mm • Max. workpiece weight: 1,500 kg • Spindle: 18,000 rpm • Magazine: 60 x HSK-A63 • Coolant system 20 bar including internal coolant supply, bed flushing, • Paper band filter with 300L additional tank volume • LED work area lighting • Oil mist extraction • 3D touch probe • 2-axis NC rotary table with four spindles • Chip conveyor • Machine weight: approx. 8.5t Lrsdpfxoz D Ak Uo Afujt • Dimensions: 2,650 x 2,800 x 2,700 mm Accessories: ----- • Documentation

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Manufacturer: Perske, multi-spindle drill head with drive -Drill head: 18 spindles -Drill bit spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Quantity: 2 pieces available Price: per piece Lrsdpsvmw H Aefx Afujt -Overall dimensions: 800/200/H575 mm -Weight: 67 kg/unit

Condition: good (used), Code: 0481 Brand: VITAP Model: BM 13/S - CE Standard Multiple boring machine with 13 spindles for furniture, carpentry, panels, kitchens, bathroom cabinets and various - CE Standard Technical data: Ljdpfx Aoz Dkwvefuort N°13 spindles Center-to-center distance between spindles 32 mm Total center-to-center distance between the first and last spindles 384 mm Table dimensions 600 x 400 mm Max drilling depth 70 mm Min spindle speed 2800 rpm Motor power 1,5 Hp Compressed air pressure 6/8 atm Overall dimensions mm 750 x 560 x 1200 h Weight kg 160

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 300 mm, type of input current: three-phase, workpiece width (max.): 220 mm, This machine is in very good condition, was not used as much as anticipated. Ljdpfszifmlsx Afuort

Condition: used, Work table: 1100 x 800 mm Table height: 900 mm Motor: 3/4 kW, rigid milling spindle, MK 5 Spindle stroke: 170 mm Max. tool diameter (profiling): 250 mm Max. tool diameter (tenon and mortise machining): 250 mm Spindle speeds: 3000/4000/6000/8000 RPM Lrodpfx Asz A H R Ajfuot Weight: approx. 600 kg Location: Nattheim

Condition: good (used), Year of construction: 2014, See documents. Ledpfx Aozqtg Aofuert List of individual machines with operating hours, etc. – see documents.

Condition: used, Year of construction: 2015, The machine will be delivered as shown in the photos, including the visible tool holders, etc. Lredpozlqavjfx Afuet

Condition: good (used), functionality: fully functional, 2 Index MS 25 E machines in very good condition and fully functional – also available individually – for sale. Inspection while the machines are powered on is possible. Lrjdpfx Afezicxlsuet

Condition: used, functionality: fully functional, total width: 1,009 mm, total length: 902 mm, total height: 678 mm, empty load weight: 165 kg, input voltage: 380 V, Range: Trégor Tradition Dough weight range: 50 to 1,450 g Capacity: up to 1,800 pieces/hour Baguette capacity: 1,500 pieces/hour Rollers: 1 pre-rolling + 2 rolling Pointed end shaping: Pointop system Settings: 2 selectors with 36-position pins Belts: woven wool on synthetic warp Lrjdpsz Ehwcofx Afujt Belt thickness: 7 mm Sides: 12 mm food-grade aluminum Fold-down safety chute Removable scrapers with snap-off mechanism Removal of both belts: approx. 25 min Power: 0.55 kW Power supply: 380 V Frequency: 50/60 Hz Current: 1.75 A at 380 V Dimensions: 1009 x 902 x 678 mm Weight: 165 kg Used MERAND Trégor Tradition dough shaper – 50 to 1,450 g General description This used MERAND Trégor Tradition dough shaper, from the previous Mécapâte generation, is designed for rolling, wrapping, and elongating dough in professional bakeries. Its vertical design allows for processing a documented range of 50 to 1,450 g, with a capacity of up to 1,800 pieces/hour depending on the weight and type of dough. The shaping process uses three rollers, including one Alvéo+ pre-rolling roller and two rolling rollers. The dough is then elongated between two belts moving in opposite directions. This configuration is particularly suitable for preparing baguettes, short loaves, half-baguettes, and various other bakery products as intended by the manufacturer. Why this Trégor Tradition stands out This version combines three characteristic features of the Trégor Tradition: PPR, the Alvéo+ roller, and the Pointop system. The Progressive and Adjustable Pre-rolling assists in adjusting the rolling process to gradually work the dough. The Alvéo+ roller, with its alveolar structure, is designed to limit degassing and better preserve the structure of fermented or hydrated doughs. The Pointop, for its part, enables the automatic shaping of breads and baguettes with pointed ends. Two selectors with 36-position pins allow for precise adjustment of the rolling and elongation, which is an advantage for achieving consistent settings between different products.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Ledpfx Afez Eht Dsujrt Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications