Used Top Lathe for sale (13,529)

Condition: used, Tornos CNC-controlled multi-spindle turning center Type/Model: Torno Multi Deco 20.8 Condition: Used, very well maintained Machine hours: approx. 65,724 h Technical data: Bar diameter: 5-20 mm Max. part length (without secondary operation): 100 mm Max. part length (with secondary operation): 80 mm Spindle rotational speed: up to 5,000 rpm Max. spindle power: 15 kW Max. drilling/internal threading power: 3.7 kW Number of numerical axes: 22 Facing slide (axial): 2 Lsdpfx Ajzgw Aaol Tsrn Cross slide (radial + axial): 5 Longitudinal slide: 7 Parting slide: 1 Counter spindle motor power: 1.1 kW Dimensions (L x W x H): approx. 5,880 x 1,400 x 1,950 mm Weight: approx. 7,200 kg

Condition: used, Year of construction: 1981, Tornos 8-spindle bar feeder, mechanically controlled Type/Model: Tornos B20 Condition: Used Year of manufacture: 1981 Technical data Max. bar diameter: round 20 mm Max. bar diameter: square 15 mm Max. bar diameter: hexagon 19 mm Max. machining length (bar feed): 60 mm Number of spindles: 8 multi-spindle Spindle speed: 20 steps from 620 to max. 6,035 rpm Number of cross slides: 8 (one per spindle) Production rate: Max. up to 50 parts per minute Dimensions (L x W x H): approx. 2465 mm x 1200 mm x 1700 mm Weight: approx. 5,900 kg Equipment / Accessories: Retrofitted with 2 CNC slides at positions 3 and 6 Complete control cabinet modernization Modification of the cam shaft with continuously adjustable servo drive Main spindle with spindle brake Lrjdpfx Alozgwv To Tsn

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm End units (longitudinal slide): 200 mm Spindle & axes Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Equipment / accessories: Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Lredszgwp Hopfx Al Tjn Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable

Condition: used, Year of construction: 1972, turning diameter over bed 1650 mm turning diameter over slide rest 1350 mm turning length 10000 mm Lsdpfx Asy S Duvol Tern turning speeds 1,4 - 280 U/min greates pass round over bed 1580 mm center height over square guideway 825 mm bed length 13.350 mm bed width 1.120 mm spindle diameter in front bearing 260 mm spindle bore 82 mm upper head travel 500mm tailstock quill diameter 200 mm max. workpiece weight between centres 10.000 kg weight of the machine ca. 25,5 t Power 45 KW The machine is a first-hand purchase, is free from defects and is in very good condition. In 2023, the headstock was overhauled; this included replacing the main spindle bearings, chrome plating and reworking the main spindle and bottom wheel (bearing seat). The guideways are also in very good condition, considering their age. Accessories - Feed guard Equipment - 3-axis digital display - 1 x faceplate - 1 x roller stand - Chip conveyor (Kabel Schlepp 300/100)

Condition: new, Distance between centers 2000 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm Lrsdpjzdr Skofx Al Tsn spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, rotational speed (min.): 25 rpm, rotational speed (max.): 1,500 rpm, Distance between centers 1000 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Lredpfx Ajzdr Ryol Tjn Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1500 mm Max. swing over bed 560 mm Ledpfx Aezdr I Ssl Tjrn Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1500 mm Ledpfx Aezdr I Eol Tern Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 - 250 1/min Spindle speed 2: 250 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, Distance between centers 1000 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Lrodpfx Aszdr Ifsl Ten Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 - 250 1/min Spindle speed 2: 250 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 2,800 mm Turning height: 1,000 mm Load capacity: 16,000 kg Max. swing diameter, approx.: 2,800 mm Turning diameter - external, max.: 2,800 mm Spindle speed: 63 rpm Cross slide travel: 620 mm Ram stroke - max.: 690 mm Tool interface: CAPTO 6 Lodpfxozfn Hyj Al Torn Included: Chip conveyor 2 supports 4-position tool turret Hydraulic chuck

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Machining diameter: 4,000 mm Machining height: 1,400 mm Travel of the rotary table: 850 mm Max. swing diameter, approx.: 4,200 mm Turning diameter – external, max.: 4,000 mm Travel of the cross slide: 850 mm Ram stroke – max.: 950 mm Ljdozfn Evopfx Al Torn Tool holder: CAPTO 6 Included: Chip conveyor 2 tailstocks 4-position tool turret Hydraulic chuck, 2,800 mm

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest Ljdpfezfnd Sox Al Tern feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Lrodjzfmu Nopfx Al Ten Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Lredpfxev S Dp Ie Al Tjn Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: used, Meuser Guide and Lead Screw Lathe Type/Model: Meuser M1L Condition: Used Year of Manufacture: 1980s Technical Data Center Height: 210 mm Distance Between Centers: 1000 mm Spindle Bore: 55 mm Lsdpfxjzgia De Al Tern Bed Width: 340 mm Spindle Speed: 40 - 1800 (12) Motor Power: 7.5 hp Tailstock Arbor: MK 3 Tailstock Quill Travel: 120 mm Dimensions (L x W x H): approx. 1750 mm x 1200 x 1750 mm Equipment / Accessories: - 3-axis digital display, Heidenhain - 3-jaw chuck - Collet chuck, Forkardt - Quick-change tool holder, Multifix, number of positions 1 - Bed stop - Follower center - Chuck guard - Taper turning attachment - Machine feet

Condition: good (used), Year of construction: 2006, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OPTIMUM, Lead screw and feed screw lathe type D320X920 -Machine bed: hardened -Turning length: 930 mm Lrodpfxszd Eqye Al Tjn -Turning diameter over bed: 320 mm -Turning diameter without bed: 500 mm -Turning diameter over support: 180 mm -Spindle bore: Ø 40 mm -Spindle speeds: 65 - 1800 rpm -Three-jaw chuck: Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5 kW -Accessories: 2x bezels, Multifix tool holder, see photos -Dimensions: 730/1590/H1310 mm -Weight: 525 kg

Condition: used, mileage: 127,000 km, power: 96 kW (130.52 HP), first registration: 03/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,300 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat with us now via WhatsApp: Get in touch with our sales consultant quickly and easily. Please note!!! We prefer to sell to businesses. Internal ID number: [3419] ----Optional extras: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV (German vehicle inspection) & emissions test * Nationwide delivery * Financing is possible, even without a down payment * Spring offer: If desired, for an additional charge of only €999, the trailer load can be increased to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * German vehicle * Accident-free * Euro 6 standard * First owner * Regularly maintained * Immediately ready for use * Maxi High + Long * Air suspension on the rear axle * Double sliding doors * Cruise control * Trailer coupling, up to 3,500 kg possible * Reversing camera * Load compartment with wooden lining * Comfort seats Special equipment: Airbag on the passenger side, floor panel in the load compartment, city package, rear wing doors (opening angle 270 degrees), sliding doors for the cargo/passenger compartment on the left and right Lredpszd Ncajfx Al Ton Additional equipment: Airbag on the driver side, audio system: radio with CD player (MP3 compatible) - display integrated, exterior mirrors, electrically adjustable and heated, both, exterior mirrors with wide-angle view, on-board computer, driver assistance system: emergency brake assist, speed limiter, rear wing doors without glazing, body/superstructure: high-roof standard van, upholstered headrests, fuel tank: 90 liters, load compartment partition, engine 2.0 liters - 96 kW Blue-HDI FAP CAT, wheelbase 4035 mm, spare wheel in driving condition, low emissions according to Euro 6 emission standard, disc brake on the rear, sliding door for the cargo/passenger compartment on the right, SCR system (AdBlue technology), side protection strips, seat cover/upholstery: fabric, seats in the cab: double passenger seat (including automatic seat belt), seats in the cab: driver's seat with armrest, height adjustable, seats in the cab: driver's seat with lumbar support, step under the sliding door on the right (electric), lining in the cargo/passenger compartment: semi-high, permissible total weight 3.5 tons ----Do you want to lease or finance? We offer attractive offers – even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 62,235 km, power: 125 kW (169.95 HP), first registration: 02/2020, fuel type: diesel, overall weight: 4,700 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,704 mm, total width: 2,126 mm, total height: 2,781 mm, loading space length: 4,073 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Errors and prior sale excepted! Internal number: 1192. KJ78697 ----EQUIPMENT * Airbag, passenger side - with airbag deactivation function * Trailer hitch, fixed - 13-pin, incl. trailer stabilization (TSC - Trailer Sway Control) * Double locking for central locking * LED exterior light, high-mounted, downlight, rear * Paint: Special paint in standard color * Off-road package 2 - Underrun protection for engine and transmission, steel plate (thickness: 2.5 mm, weight: 14 kg) * Visibility package I - Exterior mirrors, electrically adjustable, heated - Windshield, heated - Windshield washer fluid level sensor * Radio: Audio system 20: Ford audio system with 8" multifunction display - Connected Radio - FordPass Connect WLAN hotspot (up to 4 G/LTE, for up to 10 mobile devices) - 8" touchscreen multifunction display (20.32 cm screen diagonal) - Four speakers, antenna - Integrated control panel and audio remote control on the steering wheel - Support for Android Auto and Apple CarPlay - Emergency call assistant * Rear view camera: Front and rear view camera with split-view technology, high-mounted LED exterior light, downlight * Seats: Seat package 2 - Driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion inclination, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height-adjustable - Interior armrest for driver - Tray in the double passenger seat (foldable) - Artificial leather (vinyl) * Socket: 12-volt socket in the cargo area (D-pillar) * Partition to the cargo area with window incl. protective grille * 2 batteries * Transmission: 6-speed manual transmission * Anti-lock braking system with electronic brake force distribution (EBD) * Axle load increase - front to 1850 kg * Airbag, driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, high * Headliner in driver's cab - up to the partition to the cargo area * Double-wing rear door with 256° opening angle, (without window) without rear window, with retaining magnet * Tachometer * Electronic Stability Program (ESP) with Traction Control (TCS) - Hill start assist - Crosswind assist - Emergency brake assist - Rollover protection * Lane keeping assist and driver drowsiness alert and automatic high beam assistant - Windshield, heated - Headlight assistant with day/night sensor - Windshield wipers with rain sensor * Power windows, front - with quick down/up function for driver side * Ford Easy Fuel - comfort fuel filler flap and misfueling protection Ljdpszfymfjfx Al Torn * Windshield, heated * Generator, high-performance version * Speed limiter 90 km/h - not switchable off * Cruise control incl. leather steering wheel - Steering wheel with audio remote control (operation of the audio system and the on-board computer) * Glove compartment with lockable lid * Interior lighting with delay function * Air conditioning, front incl. dust and pollen filter * Cargo area lighting * Cargo area floor: Vinyl floor covering "Easy Clean" incl. wheel arch trim * Leather steering wheel * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Active emergency brake assist and Pre-Collision Assist * Parking assistance system, front and rear * Particulate filter: Diesel particulate filter * Rain sensor * Headl

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis Lrodpfoyvvt Sex Al Tsn - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Lodpfx Alsxwdw Es Tjrn Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg Lsdpfxsxr Rbye Al Tjrn - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: ready for operation (used), functionality: fully functional, Description In very good condition. Complete with digital display, chuck, quick-change tool holder, faceplate, etc. Ledpfszdrabox Al Tern Spindle bore: 76 mm. 9.3 Kw Center height: 228 mm Turning diameter over bed: 433 mm Distance between centers: 2000 mm Spindle speed: 20-1600 rpm

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck Ljdpfxezbhc Ij Al Tjrn 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: excellent (used), Here we offer an industrial robot. Ledpfozdyq Isx Al Tsrn Type: 550 Table-Top SCARA Scope of delivery: (See pictures) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: used, Year of construction: 2006, total height: 1,750 mm, total length: 2,790 mm, total width: 1,570 mm, Empty weight: 4.300 kg - Year: 2006 - Documentation available: Yes - CE certificate present: No - Serial number: GN08201038G - Drive system: CNC - Control system brand: Fanuc - Control system type: 0i-Mate TO - Power [kW]: 15.0 - Swing over bed [mm]: 250 - Distance between centres [mm]: 460 Ljdowfpaqjpfx Al Tsrn - Spindle bore [mm]: 62 - Max. spindle speed [rpm]: 4500 - Options: Removable bed - Swing over removable bed [mm]: 460 - Transport dimensions: 2790mm x 1570mm x 1750mm (l x w x h) - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum