Used Tos Galanta for sale (670)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Control system: Siemens 840-D Spindle diameter: 130 mm Spindle speed: 3500 RPM Spindle mount: ISO 50 Torque: 1320 Nm Main motor power: 37 kW Travel in X-axis: 4000 mm Travel in Y-axis: 2500 mm Travel in Z-axis: 2000 mm Travel in W-axis: 800 mm Working feed rates: 15 m/min Rapid traverse rates: 20 m/min Lodsz Ii Tdspfx Ahaoah Rotary table: 1800 x 1800 mm Table load capacity: 20,000 kg Tool magazine: 60 positions Machine weight: approx. 36 tons Universal milling head - manual

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Lasdpew U Aahefx Ahaoh Spindle speeds 63 – 3150 rpm Fixed table

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,740 mm, total width: 1,740 mm, total length: 2,090 mm, overall weight: 1,725 kg, Equipment: documentation/manual, The machine is in very good condition – it was used as a training machine until 2018; since then, it has rarely been in operation. Operating voltage: 380 V. Spindle mount: ISO 40. Quill stroke: 100 mm. Spindle speeds: 40 - 2000 rpm. Rotary table. Ljdpfxow Urire Ahaoah

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V Ledpfx Aexp Rzbehasah connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, TRACKED SINGLE-SHAFT MULTIBLADE SAWMILL TOS SVITAVY PWR 401 450/160, 75 kW MOTOR Note: Fitted with new guides and a new chain (the replacement cost was quite significant – 36,000 PLN) TECHNICAL DATA - Track width: 450 mm - Shaft width: 420 mm - Mounted blade: 400 mm - Maximum blade diameter: 450 mm - Blade bore diameter: 80 mm - Maximum cutting height with 450 mm blade: 160 mm - Table dimensions: 2230 x 860 mm Top side: - Anti-kickback pawls - Slipper shaft - Anti-kickback pawls - Smooth slip roller - Hold-down - Shaft with bushing and nut - Hold-down - 2 slip/hold-down shafts Bottom side: - Roller before the table - Guide rail - Pawls - Track chain - Central track chain lubrication Ledey Nxdyepfx Ahaeah - Electric rise and fall for sawshaft - Electric body lift: 0.75 kW - Infinitely variable feed speed – new 2.2 kW inverter installed - Extraction port diameter: 280 mm - Main motor: 75 kW - Overall dimensions (L/W/H): 2360 x 2000 x 1960 mm - Weight: 3250 kg ADVANTAGES - Czech manufacture - Used multiblade saw - Overhead operator’s control panel - Full technical documentation (DTR) - Very good condition - We can provide a warranty for the equipment

Condition: ready for operation (used), Year of construction: 2011, EXCELLENT CONDITION TOS SVITAVY FWP 225 FOUR-SIDED PLANER AND PROFILING MACHINE FOR SALE Perfect choice for industrial woodworking production and professional window manufacturing! For sale is an exceptionally well-maintained, robustly constructed, Czech-made TOS Svitavy FWP 225 four-sided planer and profiling machine. The machine is an ideal choice for larger-capacity carpentry workshops, lumber processing facilities, and specifically for the serial production of wooden joinery (windows, doors). 📌 KEY FEATURES AND TECHNICAL SPECIFICATIONS: Lasdpsz Tdhzofx Ahash • Year of manufacture: 2011 (Young, modern and precise design) • Total power: 35 kW (High-performance, efficient motors) • Supply voltage: 3~ 400 / 230 V (50 Hz) • Machine weight: 2900 kg (Nearly 3 tons, massive cast iron frame, which guarantees completely vibration-free and highly accurate machining) • Pneumatic requirements: 0.4 – 0.6 MPa (4 – 6 bar) operating air pressure for the clamping devices • Protection rating: IP 54 (Protection against dust and splashing water) • The machine features a robust cast iron frame, excellent vibration damping, and high-performance motors, which guarantee warp-free and perfect surface quality. • Key technical parameters and features: • Maximum working width: 225 mm • Maximum working height: 120–130 mm • Spindle diameter: Standard 40 mm (easy tooling) • Feed speed: Continuously adjustable (between 5 – 25 m/min) for optimal material processing. • Removable/replaceable groove bed: Modular table design that allows for the easy removal of the groove bed for quick adjustment between precise guidance of short, uneven pieces and smooth surface planing. Used in a single shift!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We offer for sale a CNC vertical lathe (carousel) TOS HULÍN SKJ 12 A CNC, equipped with a Siemens SINUMERIK 840Di control system. The machine underwent a complete overhaul and modernization in 2009, including the installation of CNC control and machine geometry adjustment. The carousel is fully functional, in operational condition, and can be demonstrated to interested parties upon prior arrangement. Technical specifications: Parameter | Value Manufacturer | TOS HULÍN Type | SKJ 12 A CNC Manufacturing number | 2212 046 Year of overhaul | 2009 Control system | Siemens SINUMERIK 840Di Diameter of clamping plate | 1,250 mm Maximum workpiece diameter | 1,400 mm Maximum workpiece height | 1,070 mm Maximum workpiece weight | 6,000 kg Cross slide stroke | 710 mm Working stroke of the ram | 720 mm Transverse travel of the tool post from the center of the clamping plate left/right | 60 / 915 mm Machine condition and equipment: * Complete overhaul and modernization in 2009 Lasdpfjz Tzyusx Ahaeh * CNC control system Siemens SINUMERIK 840Di * Turret tool head * Complete technical documentation in electronic format, including documentation before and after the overhaul * Machine geometry adjustment performed * Fully functional condition with the possibility of demonstration The machine is suitable for machining larger-sized rotary parts, flanges, fittings, and other components in mechanical engineering production. Inspection and demonstration of the machine are possible upon prior arrangement.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 14,000 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 14,000 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,400 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, workpiece length (max.): 5,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 1,400 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 10,500 kg, table width: 1,000 mm, table length: 5,000 mm, table load: 10,500 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 2,500 rpm, spindle speed (min.): 2,500 rpm, spindle speed (max.): 2,500 rpm, spindle nose: ISO 50, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, Technical specifications Table clamping width 1000 mm Table clamping length 5000 mm Working feed range 1 - 5000 mm/min Speed range 11 - 2500 rpm Spindle taper ISO 50 X-axis 5000 mm Y-axis 1000 mm Z-axis 1,400 mm Main motor power 22 kW Lasdpfx Ahe Aazqfsaeh Max. workpiece weight 10,500 kg

Condition: used, Year of construction: 1995, TOS W100A horizontal table boring machine X spindle is worn Ljdpfx Ahoz Sff Hoasah Digital read out is partially functional lot of tools included Table Dimensions 1200 x 1200 mm X-Axis Travel (Longitudinal) 1250 mm Y-Axis Travel (Vertical) 1120 mm Z-Axis Travel (Cross) 1600 mm W-Axis (Spindle) 900 mm Spindle Motor 11mkW Spindle Speed 7-1120rpm Spindle Taper ISO 50 Spindle Diamete 100 mm Facing Chuck 600 mm Floor Space 6020 x 3500 x 3000 mm Machine Weight 14.000 kg Price ex VAT Delivery ex works, as is

Condition: good (used), functionality: fully functional, machine/vehicle number: 0430373, Spur gear hobbing machine Tos OFE 22 Ljdo Abamzopfx Ahaeah machine no. 0430373

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, We can provide this machine, connected and ready for testing. A video of the machine can be sent via the WhatsApp application. General overhaul in 2008. Heideihaim positip 855 X 6,400 mm Y 2,200 mm Lasdpfxszak A Ij Ahaeh W 1,120 mm ISO 50 Weight: 32,500 kg Two plates, dimensions 602x2000x400 mm, are included with the machine. A head is also included with the machine.

Condition: good (used), functionality: fully functional, machine/vehicle number: 0430342, Spur gear hobbing machine Tos OFE 22 machine no. 0430342 Ljdpfx Ao Abanxshaoah

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Lsdpsz Tdcfsfx Ahajah

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: TNC407, overall weight: 13,400 kg, spindle speed (max.): 1,250 rpm, table load: 3,000 kg, number of axes: 4, This 4-axis TOS WH 10 CNC boring machine was manufactured in 1996. It features a longitudinal travel of 1250 mm, transverse feed of 1100 mm, and vertical travel of 950 mm. The machine has a robust table size of 1000 x 1120 mm and a maximum table load capacity of 3000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WH 10 CNC machine we have for sale. Contact us for further details. • Spindle diameter: 100 mm • Table size: 1000 x 1120 mm • Retrofitted: 2018 Technical Specification Lasdj Adtm Hopfx Ahaoh Taper Size ISO 50

Condition: good (used), functionality: fully functional, universal grinder BHU 32/1000 Lsdpfx Ahs Aaybieasah

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, TOS Varnsdorf WHQ 13.8 CNC table type horizontal boring mill, year of construction 2000, made in the Czech Republic. The machine is controlled by an original Heidenhain TNC 430 CNC with the Heidenhain operating panel and runs programs produced with CAM software. The control cabinet air conditioning unit was replaced one year ago. The machine is well maintained and in full working order. Technical data: - Control: Heidenhain TNC 430 - Spindle diameter: 130 mm - Spindle speed: 10 - 2,500 rpm Lajdpfjz Ap Awsx Ahaoh - Tool taper: ISO SK 50 - X travel: 3,500 mm - Y travel (vertical axis): 2,500 mm - Z travel: 1,250 mm - Table size: 2,200 x 1,800 mm - Operator platform with 250 kg load capacity - Air conditioning unit fitted one year ago - Programmable via CAM software The machine can be inspected under power in our workshop.

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 1,130 mm, travel distance Y-axis: 1,370 mm, controller manufacturer: HEIDENHAIN, controller model: 530, overall weight: 11,000 kg, spindle motor power: 15,000 W, spindle speed (max.): 1,120 rpm, number of axes: 4, This 4-axis TOS WHN 9 B CNC boring machine was manufactured in 2007. It features a cross travel of 1370 mm and a longitudinal travel of 1130 mm, with a table clamping surface of 1120 x 990 mm. The machine is equipped with a spindle diameter of 90 mm and a spindle speed range of 9–1120 rpm. If you are looking to get high-quality boring capabilities, consider the TOS WHN 9 B CNC machine we have for sale. Contact us for further details. • Spindle diameter: 90 mm • Table clamping surface: 1120 x 990 mm • Overhauled: 2018 • Spindle hours: 13,400 h Ljdpfx Ahe Aayz Aoasah

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, quill stroke: 100 mm, overall weight: 7,000 kg, Equipment: documentation/manual, X-axis travel: 1.400 mm Y-axis travel: 630 mm Z-axis travel: 500 mm Table dimensions: 1.800 x 630 mm Max. table load: 1.500 kg Spindle taper: ISO 50 Spindle speed range: 45 tot 2.240 rpm Lajdpfxjz Tdhuj Ahaeh Featured with: - Heidenhain Positip DRO - Vertical/Horizontal milling head - Horizontal milling arbor support - Horizontal milling arbors - Manual spindle quill 100 mm - Coolant system - Machine user manuals

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 14,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, Travel ranges: - X-axis: 14,000 mm - Y-axis: 4,000 mm - Z-axis: 1,000 mm - W-axis travel: 800 mm Equipped with automatic tool changer Model WRD 150 Q - 60 tools Manipulator for horizontal and vertical tool changes Milling head - HUI 50 - automatically positionable, with pick-up station + 1 storage location Band filter system with 2 cooling circuits - internal cooling through the spindle with approximately 20 bar (30 l/min), external cooling with 3 bar (40 l/min) - RAPID 3.1, manufacturer AME Laedpozzwhlefx Ahaoh EQUIPMENT: - Chip conveyor for X = 14,000 mm - 3D probe with wireless transmission, manufacturer M & H, wireless handwheel PETEC - 6 clamping plates AND 4, 4020 x 1885 mm

Condition: used, Year of construction: 2010, Faceplate LD 650 for TOS WHQ 13 For sale: a used faceplate LD 650, manufactured in 2010, suitable for TOS WHQ 13. Suitable for facing, turning, and machining large diameters. Slide stroke: 170 mm, maximum machining diameter: approx. 1,000 mm. The faceplate is intended for use on a TOS WHQ 13. Technical data: Laedpfxoz I Dvme Ahajh Type: LD 650 Diameter: 650 mm Slide stroke: 170 mm Machining diameter: 300 - 1,000 mm Speed: up to 150 rpm including turning tool holder Price: 9,100.00 Euro net (new price: 21,500.00 €)

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 130 mm, spindle speed (max.): 1,500 rpm, table length: 1,800 mm, table width: 1,600 mm, feed length W-axis: 600 mm, TOS Varnsdorf WHN 13 A table type horizontal boring mill (borer), year of construction 1982. The machine has been retrofitted with a FANUC CNC control; maximum spindle speed 1,500 rpm. Well maintained and in working condition. Technical data: - Table size: 1,600 x 1,800 mm - X travel: 3,500 mm - Y travel: 2,000 mm - Z travel: 1,000 mm - W travel (boring spindle / quill): 600 mm - Spindle diameter: 130 mm - Max. spindle speed: 1,500 rpm - Control: FANUC (retrofit) Ljdpjz An Ufsfx Ahajah Available for inspection in our workshop and ready for immediate delivery.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,100 mm, spindle diameter: 100 mm, table length: 1,100 mm, table width: 1,000 mm, TOS Varnsdorf WH 10 NC table type horizontal boring mill (borer), year of construction 1987. Lasdpez Apa Nefx Ahaeh The machine has been converted to an HSP control and its electrical/electronic system has been overhauled. Well maintained and in working condition. Technical data: - Table size: 1,100 x 1,000 mm - X travel: 1,200 mm - Y travel: 1,100 mm - Spindle diameter: 100 mm - Control: HSP (retrofit), electrics overhauled Available for inspection in our workshop and ready for immediate delivery.

Condition: used, total length: 2,000 mm, total width: 1,600 mm, total height: 2,350 mm, Colour: White Empty weight: 3.000 kg - Drive system: Conventional - Model: vertical - Number of axes [pcs]: 3 - Power [kW]: 5.5 Ledpfxoz R Dr Uj Ahajah - Max. stroke [mm]: 250 - Max. reach [mm]: 365 - Table diameter [mm]: 500 - Table length [mm]: 500 - Table width [mm]: 500 - Table depth [mm]: 500 - X-axis travel [mm]: 560 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 250 - Min. stroke speed [rpm]: 22 - Max. stroke speed [rpm]: 112 - Transport dimensions: 2000mm x 1600mm x 2350mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm – from above: - feed rollers - toothed infeed roller - pressure rollers, 2 rows - toothed infeed roller - pressure roller - planing roller 510mm, 4-knife, 7.5kW motor - pressure rollers - smooth outfeed roller - outfeed pressure roller, 2 pcs - smooth feed roller – from below: - pressure roller - adjustable infeed table + slip roller - planing roller 510mm, 4-knife, 5.5kW motor - 2 slip rollers, smooth - side pressure roller – from the rear: - side spindles 1) vertical right 140mm, 4kW 2) vertical left 140mm, 4kW - spindle diameter 40mm - installed 4-knife cutterheads at a height of 120mm - spindles adjustable up/down, left/right - stepless feed speed adjustment - electric table lifting - dust extraction port diameters 3x150mm, 1x110mm - dimensions L/W/H 2300x1700x1700mm - weight 2200kg Lsdsztpmqspfx Ahajah ADVANTAGES – ideal for processing flooring – electric table lifting – Czech production – used planer, very good condition Net price: 36900 PLN Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 * Year of manufacture: 1971 * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available * Maintenance / Repairs: In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Ledpfszwv Dkjx Ahaeah Due to its size and weight, the buyer is responsible for organizing the collection or transport. Further photos and information on the available additional equipment are available upon request. VAT can be shown separately.