Used Touch Probe for sale (4,223)

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C Fsdpfxsz Hckms Al Uspn - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: excellent (used), FARO Titanium Arm 2.4 m 3D coordinate measuring arm with PLANOLITH measuring table Description For sale is a used FARO Titanium Arm 3D coordinate measuring system with a PLANOLITH granite measuring table and extensive measuring and documentation accessories. The portable measuring arm is designed for industrial measuring and testing tasks, quality control, and the geometric measurement of components. Technical data Manufacturer: FARO Model: Titanium Arm Equipment type: Mobile 3D coordinate measuring arm / Portable CMM Date of manufacture: 06.12.2004 Revision: 21.0 Measuring range: 2.4 m Single Point: 0.051 mm Volumetric accuracy: ±0.072 mm Certification date according to nameplate: 07.06.2016 Country of manufacture: Switzerland PLANOLITH measuring table Accuracy class: DIN 876/1 Permissible deviation: 0.022 mm Actual deviation: 0.00498 mm Weight of granite plate: approx. 460 kg Table dimensions: approx. 1200 × 800 × 940 mm (L × W × H) Total weight of table: approx. 560 kg Equipment FARO Titanium Arm PLANOLITH granite measuring plate with base frame FARO transport case Measuring probe and extensive measuring accessories as shown in the pictures Accessory case Magnetic clamping plate Cables Fodoz Hm Ngopfx Al Uepn FARO manuals and documentation Software/data carriers as shown in the pictures Additional accessories as shown in the pictures Transport data Footprint of measuring table: approx. 1200 × 800 mm Height of measuring table: approx. 940 mm Weight of granite plate: approx. 460 kg Total weight of table: approx. 560 kg Transport by freight forwarder possible. Condition Used. Optical condition as shown in the pictures. Scope of delivery FARO Titanium Arm with PLANOLITH measuring table, transport case, measuring accessories, documentation, and additional accessories as shown in the pictures. Availability by arrangement. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2007, offer consists of: Horizon AFC-544 AKT 4-buckles cross folder - technology: touch & work - memory folding types: 17 standard-typs of fold preprogrammed - saveable jobs: 200 memories for repeat orders Fpodez Hwcdopfx Al Uen - numbers of buckles: 1. folding unit: 4 buckles + knife 2. folding unit: 2 buckles - knife: full automatic - sheet size: max. 540x760mm; min. 120x172mm - fold length: 1. buckle: min. 58mm all other buckles: min. 35mm - paper weight: 40-250g/sqm - pile height: 650mm - speed: max. 40.000 cycles/h - power: 400V/50Hz - 2,5kW - dimensions: 2.700x1.050x1.650mm (without conveyor) - weight: 1.050kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2008, Overview This Haloila Octopus 1800 SFTS TWIN is an automatic rotary-ring stretch wrapper for palletised loads, built in 2008. It was built by Oy M. Haloila Ab and delivered under the ITW Mima Packaging Systems brand; the Octopus line is sold today under the Signode name. The machine is still installed, under power and running in production, and can be inspected in operation. The rotating ring carries the film carriages around the stationary pallet, so the load itself is never turned. In the TWIN configuration two film carriages run on the ring, which is what carries the output: up to 100 pallets per hour with standard overlap and 21 wraps. Euro pallets and half pallets are processed. A top sheet unit is installed, functional and in daily use. The machine has no automatic reel change (RCS). Technical data - Manufacturer: Haloila - Model: Octopus 1800 SFTS TWIN - Year of manufacture: 2008 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Operating hours: 50,408 h - Output: up to 100 pallets/h at standard overlap and 21 wraps - Pallet formats: Euro pallets and half pallets - Configuration: TWIN, two film carriages on the rotating ring - Automatic reel change (RCS): no - Top sheet unit: yes, functional and in use - Control: Siemens SIMATIC S7-300 PLC - Operator panel: Siemens SIMATIC touch panel - Communication: SIMATIC NET / PROFIBUS - Drives: Emerson / Control Techniques frequency inverters (Commander SK, Unidrive M300) - Power supply: 3 x 400 V - Max. current: 20 A - Connected load: 5.0 kW - Machine weight: approx. 2,650 kg - CE mark on the machine plate Equipment - Rotating ring with two film carriages (TWIN), film clamping and cutting on the ring - Top sheet unit for covering the pallet load before wrapping - Siemens SIMATIC S7-300 control with touch panel operation in a separate switch cabinet - Emerson / Control Techniques inverter drives - Pallet conveyors below the winder, included in the sale - Operating manual, wiring diagrams and further technical documentation Fsdpfez D Aw Uex Al Uspn Condition Used and fully functional. The machine is in production at the time of listing and has 50,408 operating hours. Maintenance was carried out regularly by the machine manufacturer. Sold without warranty. Availability From 16 October 2026. Location: Germany.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, number of axes: 3, This 3-axis Leitz Reference HP 5.4.3 was manufactured in 2020. It features a measuring range of 500 × 400 × 300 mm and includes a granite table, Hexagon LSP-X3 probe system, and a Leitz controller. If you are looking to get high-quality coordinate measuring capabilities, consider the Leitz Reference HP 5.4.3 CMM machine we have for sale. Contact us for further details. • Viewing: Possible by appointment; machine can be seen running • Incoterm/Collection: EXW Technical specifications • Accuracy (MPE-E): 0.70 + L/400 µm • Probing error (MPE-P): 0.80 µm • Table: Granite table • Probe system: Hexagon LSP-X3 • Stylus clamping: HP-S-X3 • Stylus changer: Hexagon 5-port stylus change rack • Change ports: HR-X3-P • Controller: Leitz controller in free-standing cabinet • Operator control: Leitz twin-joystick panel with emergency stop Machine history / service • Aug 2020: Machine and accessories supplied new by Hexagon Metrology • Sep 2020: Software bundle supplied by Hexagon • Feb 2021: 6 additional M2 stepped styli purchased • Apr 2021: Installed and commissioned in Andover by a Hexagon engineer (Installation/service report ref. 15320) • Last calibration: 16 May 2023 by Hexagon Metrology • Standard: ISO 10360-2:2001 • Certificate: CAA/REF769/543/16052023 • Result: Calibration met customer specification • Certificate available on request • Calibration validity: until 24 May 2024 Additional equipment • QUINDOS version 2023 • I++ Simulator + QUINDOS bundle • Additional CMM model • Licence manager for add-on bundle • Software licence transfer: subject to confirmation by Hexagon Peripherals and fixturing • HP workstation PC with 2 monitors • Kinematic fixturing: • Swift-Fix universal kinematic base (1) • Swift-Fix kinematic plates 300 × 300 × 16 mm (2) • Ceramic reference sphere Ø30 mm (1) Styli, holders, adapters, and change hardware • HR-X3-P changer ports (5) • Stylus kit • Special stylus holders (3) • 8 × M5 + 8 × Ø2 mm stylus holder (1) • M5/M2 stylus adapter (1) • M2 5-way stylus holder (1) • M2 stepped styli: 4 + 6 • M2 stylus R1 (1) • Special Ø0.3 mm ruby styli (8) • Special Ø1 mm ruby/carbide stylus (1) • Ø1.5 mm Si3N4 stylus (1) • Ø3 × 35 mm ruby stylus (1) • Ø3 × 50 mm ruby stylus (1) Fpodpfoz H Tmrjx Al Uon • Ø5 × 60 mm ruby stylus (1) • Titanium extension (1) • Rotary joint (1) • Adjustable cubes (2) • M5 cube (1)

Condition: used, Year of construction: 2005, x-travel 2000 (775 + 600) mm y-travel 620 mm z-travel 520 mm Control Heidenhain iTNC 530 turning speed range - main spindle 12.000 min/-1 power capacity - main spindel 18 kW table surface area 1.200 x 600 mm rotary table diameter Ø 500 mm swivellable +15/-95 ° rotatable 0- 360 ° max. table load 1000/350 kg tool taper SK 40 number of toolpositions 30 pos. internal coolant system feed 20 bar rapid traverse ( X / Y / Z ) 30 m/min dimensions 5,0x 2,5 x 3,3 m weight of the machine ca. 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight Fjdpfxoxbh D Do Al Uspn - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spindle in 2016 at 20.800 Spindle hours

Condition: used, mileage: 18,466 km, power: 106 kW (144.12 HP), first registration: 10/2025, fuel type: diesel, overall weight: 3,100 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,331 mm, total width: 1,924 mm, total height: 1,910 mm, loading space length: 2,862 mm, loading space width: 1,584 mm, loading space height: 1,329 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0891. U299878 ----EQUIPMENT * Trailer coupling preparation with trailer stability control * Seats: Driver's seat with height adjustment, armrest and lumbar support - Double passenger seat including ModuWork * Load compartment lining: Protective load compartment floor made of wood (9 mm, non-slip) and side panels made of wood (6 mm) * Package: City - Rear-view camera 180-degree - Audio system IVI mid, 10" monochrome touchscreen, Digital radio reception DAB, Bluetooth, WiFi, USB Type C, Android-Auto, Apple-Carplay - Digital instrument cluster, 10", multi-color * Package: Connect Nav - Audio system IVI high, Navigation system, 10" touch, DAB, BT, WiFi, USB-C, Android, Apple-CP - Digital instrument cluster, 10", multi-color - Visibility: Fog lights, Exterior mirrors electrically adjustable, heated and foldable, 12V socket, 120W in the glove compartment and left D-pillar * Package: Surround View - Blind spot assist - Parking assistance front and rear with acoustic signal including lateral obstacle detection - Visibility: Fog lights, Exterior mirrors electrically adjustable, heated and foldable, 12V socket - City: Rear-view camera 180-degree, Audio system IVI mid, 10" monochrome touchscreen, Digital radio reception DAB, Bluetooth, WiFi, USB Type C, Android-Auto, Apple-Carplay, Digital instrument cluster, 10", multi-color * Package: Visibility - Fog lights - Exterior mirrors electrically adjustable, heated and foldable - 12V socket, 120W in the glove compartment and left D-pillar * Transmission: 6-speed manual * ABS including brake assist and adaptive brake lights * Airbag: Driver and passenger side * Exterior mirrors, electrically adjustable and heated * Hill start assist * Brake light, third * CITROËN Connect Box: Emergency call and assistance system * Digital instrument cluster, monochrome * Tachometer * ESP (Electronic Stability Program) * Parking assistance rear with acoustic signal * Increased payload +400KG * Seats: Driver's seat adjustable in height with lumbar support and armrest including double passenger seat including storage compartments * Electric windows in row 1 * Speed limiter and cruise control * Air conditioning, manual * Headrests (3), front * Paint: Solid color * Headlight range adjustment, manual * Light and rain sensor * Package: Safety - Lane departure warning system - Collision warning and emergency braking assistant - Display of the permitted maximum speed * Attention assist - High beam assist Fpjdpfxsz Ik Hre Al Uen * Particulate filter: Diesel particulate filter * Upholstery: Fabric * Tire pressure sensor, indirect * Backrest of the seats in row 1 on the rear without fabric cover * Headlights: Standard halogen headlights, daytime running lights * Power steering * 12V socket, 120W in the glove compartment * Partition, sheet metal * Doors: Rear wing doors 50/50, opening 180°, sheet metal * Doors: Sliding door, right, manual * Immobilizer * Central locking with remote control ... and more ----The vehicle has not been prepared! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle in part exchange. Financing / leasing also possible without down payment! Do you have any further questions? We will be happy to advise you!

Condition: good (used), Year of construction: 2022, Loma CW3 Checkweigher Fpodpfxsz D Hy Ts Al Ujn Serial: EQCW-143-DEV-026380 2022, Stainless checkweigher, belt dimensions 2050mm x 180mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, table width: 350 mm, table length: 850 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between November 16, 2026, and November 26, 2026! The machine’s spindle was recently replaced! TECHNICAL DETAILS Travel distance X-axis: 800 mm Travel distance Y-axis: 500 + 50 mm Travel distance Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool positions: 40 Table length: 850 mm Table width: 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Weight: 10,000 kg EQUIPMENT Chip conveyor KNOLL Paper band filter system KNOLL Zero-point clamping system SCHUNK SDE 138 Tool holders and tools in the tool changer Measuring probe as shown in the pictures Fpjdpfxjz Il Nzs Al Uen Note: A truck with a width of 3,000 mm is required for transport. External reference: Wittner - Lot 11

Condition: used, mileage: 360,000 km, power: 115 kW (156.36 HP), first registration: 11/2005, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro3, number of seats: 3, total length: 7,000 mm, loading space length: 4,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch with our sales consultant quickly and easily. Please note!!! Sales are preferably made to commercial customers. Internal ID number: [3365] ---- Vehicle highlights: * 19% VAT can be shown * German vehicle * Maxi high + long * Large 2.7-liter diesel engine * Air conditioning * Refrigerated cargo area including cooling insulation * Manual transmission Fjdpfx Aoy Tgvfel Uepn Special equipment: 2nd battery, reinforced, 88 Ah, exterior mirrors, electrically adjustable and heated, both sides, battery 100 Ah, tachograph, 1 day / 2 driver automatic (EC), rear door without glazing (opening angle 270 degrees), fuel tank: main tank 100 liters, step for rear door Additional equipment: Airbag, driver's side, tachometer, rear wing doors raised and high roof, generator 90 A, seatbelt pretensioners, rear window, glued, body/structure: high-volume, body/structure: standard high-volume van, fuel preheating (diesel), cargo area bulkhead, engine 2.7 liters - 115 kW CDI catalytic converter, wheelbase 4025 mm, sliding door, cargo/passenger compartment, right, seat cover/upholstery: fabric, seats in the driver's cab: standard driver and passenger seat, reinforced front axle, permissible total weight 3.50 t ----Would you like to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 190,000 km, power: 100 kW (135.96 HP), first registration: 03/2013, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 9, total length: 6,000 mm, Equipment: ABS, air conditioning, central locking, parking heater, soot filter, Chat with us now via WhatsApp: Fpedpfozhhy Eox Al Uon Get in touch quickly and easily with our sales consultant. Attention!!! Sales preferably to commercial customers. Internal ID number: [3400] ----Optional extras: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing available even without a down payment * Spring offer: On request and for an additional charge of just €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown separately * German vehicle * Accident-free * Regularly maintained * Ready for immediate use * High roof + Long wheelbase * 9 seats (2+2+2+3) * Automatic climate control * Parking heater * Rear-view camera * Rear ventilation * Parking heater Special equipment: Airbag for driver/front passenger, RCD 2001 audio system, Exterior mirrors electrically adjustable and heated, Outside temperature display, Door handle on B-pillar, Electrical interface for external use (CAN data bus) with connection terminal, Driving assistance system: Front and rear parking assistance with rear-view camera, Grab handles in the front, Rear window wiper, Interior lights in the cab: Reading lights in the front (2), Isofix mounting points for child seat in the rear seat, Rear headrests adjustable in height/tilt, Steering column (steering wheel) adjustable, Acoustic reversing warning (warning signal outside), Mud flaps in the front, Seats in the cab: Driver and front passenger seat heated, Seats in the cargo/passenger compartment: 1st row, 2-seater bench, Seats in the cargo/passenger compartment: 2nd row, 2-seater bench, Seats in the cargo/passenger compartment: 3rd row, 3-seater bench, Rear windows tinted, Trim in the cargo/passenger compartment: Wood/foil, high with ashtray, Tow hitch preparation (socket and cable), Thermal insulation in the cab and cargo/passenger compartment, Auxiliary heater (hot water) 10 kW Additional equipment: Storage compartments: Luggage net on the rear tailgate, Storage compartments: Tray/compartment, flat, above the windshield, Airbag for driver, Anti-slip control (ASR), Exhaust tailpipe straight to the rear, Floor covering in the cargo/passenger compartment: Rubber, Roof lining, Driving assistance system: Brake assist (HBA), Suspension: Comfort suspension in the rear, Window in the cargo/passenger compartment: - fixed, rear left, Window in the cargo/passenger compartment: - fixed, rear right, Window in the cargo/passenger compartment: - fixed, front left, Window in the cargo/passenger compartment: - fixed, front right, Additional noise reduction (cab), Rear tailgate with windows, Rear window heated, Body/superstructure: Standard high-roof station wagon, Body variant: High roof, Front headrests adjustable in height/tilt, Side marker lights, Model upgrade, Engine 2.0 Ltr. - 100 kW TDI, Wheelbase 3665 mm, Tire repair kit, Low pollutant emissions according to emission standard Euro 5, Sliding door cargo/passenger compartment, right, Seat cover/upholstery: Fabric, Seats in the cab: Front passenger seat adjustable in height, Seats in the cab: Front passenger seat adjustable, Seats in the cab: Driver's seat adjustable in height, Seats in the cargo/passenger compartment: Mounting points for 3-seater bench, Stabilizer bar in the front, Steel rims 6.5x16, Warm air vents under 1st row of seats, Warning system for seat belt (driver's side), Heat-protection glazing, Permissible total weight 3.

Condition: used, mileage: 552,881 km, power: 331 kW (450.03 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, total length: 10,250 mm, total width: 2,550 mm, total height: 3,850 mm, loading space length: 6,658 mm, loading space width: 2,486 mm, loading space height: 900 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Cab (cockpit)* Cab type: CR, high roof, color: Arctic Silver Metallic * Air conditioning: automatic * Auxiliary heater: WTA cab heater 3 kW * Additional cab cooling: present * Air-suspended comfort cab * Electric sunroof * Comfort seats: driver's side premium, passenger side reclining seat, both with velour upholstery * Lower bed: 800 mm, pocket spring mattress * Upper bed: 700 mm, with safety net * Refrigerator and drawer in the rear area * Numerous storage compartments, including above the doors * Exterior mirrors: electrically adjustable and heated, wide-angle and close-up mirrors * Sun visor outside and on the driver's door * Rain sensor * Electric windows * Central locking with remote controls * Roof rails * Coffee maker in the dashboard * Lower storage compartments: refrigerator (driver's side), drawer (passenger side) ----Comfort and Infotainment* Premium infotainment system Touch * DAB+ / Navigation / Bluetooth / Phone / Traffic / Mps * Navigation system with European maps * Multifunctional steering wheel * Digital radio (DAB) * Bluetooth hands-free system * CB radio Stabo XM 3003 * USB charging sockets in several locations * TV preparation * 12/24V sockets: extended * Reversing camera ----Electrical system and lighting* Headlights: LED, with cleaning system * Fog lights: LED * Daytime running lights: LED * Rear lights: LED * Work lights rear: left and right * Roof spotlights * Sun visor ----Safety and Assistance Systems* Adaptive cruise control (ACC) with active prediction * Lane departure warning system (LDWS) * Immobilizer (engine immobilizer) * Airbag in the steering wheel * ESP (can be deactivated) ----Engine and Drive* Engine: DC13 148/450 hp, 331 kW, Euro 6, 13-liter displacement * Transmission: GRS895R with Opticruise (automated manual transmission) * Retarder: Scania R3500 * SCR system (AdBlue) * Particulate filter (DPF): present ----Chassis and Brakes* Tag axle, steered & liftable * Full air suspension Fpedjztihbjpfx Al Uon * Disc brakes, electronic braking system * ABS/EBS * Hill hold, emergency braking assist (Advanced Emergency Braking) * Differential lock, rear axle * Trailer coupling: Ringfeder 4045 (40) ----Superstructure Wooden floor with rail system * High side panels (folding) * Fixed front wall * Storage boxes FASSI F155A.2.23 Rear loading crane * Radio system with remote control & charging station * 2 additional hydraulic supports * 3 extensions up to 10.35m & 1260 kg load capacity * max. load capacity of 4800 kg ----* Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/70R22.5 * Fuel tank: 600 ltr. * AdBlue tank: 80 ltr. * Technically permissible total weight: 26500 kg * Tare weight: 13600 kg * Permissible trailer load: 29542 kg * Overall length: 10250 mm * Wheelbase: 4750 mm * Next inspection: 02.2027 ----Vehicle number/Vehicle: 12371----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will be happy to assist you with all the formalities involved in buying a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge: ----Trade-in of your old vehicleTÜV/SP inspectionComplete export processingArrangement of financingApplication for export license platesVehicle transportRegistration of vehiclesRecovery and vehicle transport ----YOUR VTS TEAM

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: DF 3-4/080096, total width: 1,185 mm, total length: 970 mm, total height: 2,400 mm, workpiece weight (max.): 15 kg, empty load weight: 420 kg, number of slots in tool magazine: 12, The machine was used exclusively for rounding the cutting edges of carbide drills and milling cutters. The machining area of the machine consists of a work container, which, depending on the desired abrasiveness of the machining process, is filled with a grinding or polishing medium. The workpieces are attached to holders, lowered into the work container, and moved through the medium via a planetary gear. The friction between the workpiece and the medium results in effective machining in the micrometer range, so that subsequent coating has a significantly higher adhesion. Control system: Siemens: Simatic Multi Panel, Touch Accessories: Stirring paddle, documentation, 3 transport carts each with one container, 12 holders, long version for short tools, 12 holders, short version for longer tools, Fsdpfoz N Tc Tjx Al Uopn approx. 130 reduction holders, diameter 4-25mm.

Condition: used, Year of construction: 2018, HAAS ST20Y, year 2018 Y-axis Fpsdpez N Splofx Al Ujn C-axis Live tooling Chuck diameter 210mm Max. spindle speed 4000 rpm Spindle bore 51mm Z-axis travel 533mm Y-axis travel ±51 mm X-axis travel 236 mm Tool turret with 24 positions on BMT65 Programmable tailstock Tool probe Part catcher Chip conveyor Tool holders: 9 standard Powered tool holders: 2, 1/1

Condition: excellent (used), Year of construction: 2016, VDL UVA Lima 250 High speed VFFS Serial: 2016542 2016, Stainless, high speed continuous motion vertical form seal bagging machine, jaw width 320mm, up to 200 bags per minute, Allen Bradley HMI touch panel, with Becker vac pump and Markem Smartdate X40, comes with four different sets of forming shoulders a trolley of additional parts and a flighted elevator outfeed conveyor, 3Ph Fsdpfxsz It I Sj Al Uspn

Condition: excellent (used), Year of construction: 1998, control type: CNC control, controller model: SIEMENS TOUCH, number of rollers: 3, overall weight: 15,000 kg, total length: 2,600 mm, total width: 2,200 mm, total height: 2,300 mm, Profile bending machine FACCIN - RCMI 180 MACH-ID 9828 Make: FACCIN Type: RCMI 180 Control: SIEMENS TOUCH YOP: 1998 Power 30 kw Fjdoz Iwy Sepfx Al Uopn Hydraulic side supports 3 roll driven  Touchscreen SIEMENS Panel with S7 SPS  Laser measuring device for Radius  Set Universal rolls hardned Set Tool points  Horizontal and vertical:Horizontal Shaft Ø: 190mm Number of rolls: 3 Stroke X-Axis: 500mm Resistance moment: 360CM³ Working speed: 2000 - 5000mm/min. Length: 2600mm Width: 2200mm Height: 2300mm Weight: 15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Pallet feeder PF Touch screen Navigation with auto set plates rollers 4 plates 2 knives Side pocket heidelberg presser stacker delivery Fedpfx Ajyx Nltol Uspn

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m Fpjdpfx Alsz Ipvfj Ujn All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Fpedpfx Aljz Ipu Us Usn Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Fpedpfx Alsx Db D Aj Usn Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) Fjdpfoz Irx Nsx Al Uopn ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end Fodpfez Ir Haex Al Uepn ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothG, total height: 2,807 mm, table load: 1,200 kg, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis Mazak VCN-530C was manufactured in 2020. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,300 x 550 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN-530C vertical machining centre we have for sale. Contact us for further details. Working area and travels • Table-to-spindle nose: 150–660 mm • Column surface to spindle centre: 586 mmTable • Dimensions: 1,300 × 550 mm • T-slots: 5 × 18 mm; pitch 100 mmSpindle • Drive: Electrically selected two-range • Spindle bearing bore: 70 mm • Acceleration time: 2.0 s • Motor power: 18.5 kW (5 min) / 11 kW (40% ED) / 7.5 kW (S1)Feed rates • Rapid traverse X/Y/Z: 42 m/min • Cutting feed X/Y/Z: 1–42,000 mm/minAutomatic tool changer • Max tool diameter: 80 mm (adjacent tools) / 125 mm (adjacent pockets empty) • Max tool length: 350 mm (from gauge line) • Tool selection: MAZATROL random memory, shortest-path • Tool-to-tool time: 1.3 sCoolant and chip management • Through-spindle high-pressure coolant: approx. 15 kgf/cm² (~14.7 bar) • Coolant tank: 250 L • Coolant flushing for covers • Manual washdown gun • Workpiece air blast • Preparation for mist extractionControl functions and probing preparation • Synchronous tapping • Maximum program size: 8 MB • G00 Slope Constant (rapid movement optimisation) • Preparation for Renishaw OMP60 workpiece probeMachine dimensions • Floor space: 2,880 × 3,102 mm Additional equipment • Kitagawa NC rotary table, MR250 series (Type: MR250RAE13) Fjdpfx Aljz Iqy Ee Uopn • Date of manufacture: Oct 2020 • Weight: 85 kg • Mechanical mounting for MR250 included • CROWTHER left-side hinged-belt chip conveyor • Additional working-area lighting • Three-colour LED signal tower • Polish manuals and safety labels Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp Fedpfxjz Ipqpo Al Uspn It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic operation Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-barless, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic operation Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the fixed platen Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic coolant regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Fpsdpfx Ajz Ipr Tel Uen Price: On request