Used Touch Probe for sale (4,050)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 30,826 h, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, controller manufacturer: HURCO, controller model: Ultimax, overall weight: 3,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Hurco VM1 was manufactured in 2004. It features a maximum spindle speed of 10,000 rpm and a cutting feed rate of up to 11,400 mm/min. The machine has a table size of approximately 760 × 355 mm and offers a tool changer with 16 stations. If you are looking to get high-quality milling capabilities, consider the Hurco VM1 vertical machining centre we have for sale. Contact us for further details. • Cutting feed rate: max. 11,400 mm/min • Table size: approx. 760 × 355 mm • Tool changer: 16 stations • Machine hours: 30.826 • Condition: Used, good overall condition; fully functional and ready for operation Additional equipment • Coolant pump • Chip conveyor • Machine vise • 3D touch probe • Various collet sets / SK 40 tool holders Fedpjylnbfsfx Ahnegc • Tool cabinet with worktop and bench vise • Additional accessories by arrangement Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640 (19" Touch-Screen display), table width: 650 mm, table length: 1,600 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, tool weight: 7,000 g, number of axes: 3, This 3-axis HARTFORD LG 1570 TNC 640 was manufactured in 2023. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 700 mm, and Z-axis travel of 650 mm. The machine includes a robust clamping table with dimensions of 1,600 x 650 mm and a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HARTFORD LG 1570 TNC 640 vertical machining centre. Contact us for further details. Fgsdpfxozccgqs Ahnjc - T-Slots configuration: 5 slots, 125 mm distance, 18 mm size- Guideway System: Upgraded Linear Roller Guideways on X, Y, and Z axes (instead of standard ball guides)- Feed Drives: Digital servo motors with ball screws on all axes- Main Spindle Taper: SK40- Main Spindle Drive: Pulley/Belt driven AC motor- Max. Spindle Torque (M max): 89 Nm- Spindle Temperature Control: Closed cooling circuit with separate spindle cooling unit- Tool Changer Type: Automatic Tool Changer (ATC) with rapid-change double arm- Tool Magazine Capacity: 30 positions (ATC30)- Max. Tool Diameter: Ø75 mm (Ø150 mm if adjacent positions are empty)- Max. Tool Length: 300 mm- Workpiece Probe: 3D Touch Probe (installed for automatic zero-point and position measurement)- Tool Probe: Tool Touch Probe System (installed on table for length, diameter, and tool breakage detection)- Internal Coolant Supply (IKZ): High-pressure pump system, max. 20 bar with cartridge filter- External Coolant Supply (AKZ): Multi-nozzle system on spindle nose- Air Supply: Spindle nose compressed air cooling nozzle & central air through the spindle (programmable via M-functions)- Chip Management: Enclosed workspace with sloped bed, chip flushing system, and longitudinal hinged belt chip conveyor (discharge height approx. 1,200 mm, discharge side: Left)- Enclosure features: Front electronically monitored sliding door, side swing doors with windows for long workpieces- Lubrication: Fully automatic central lubrication system with level control and CNC warnings- Workspace Lighting: 2x LED lights- Additional Equipment: Control cabinet air conditioning unit, electronic handheld handwheel, compressed air gun with coiled hose, hand-operated coolant flushing gun- Color Scheme: Black (base frame, column, vertical slide, coolant tank, cabinet, doors, conveyor) & White (enclosure housing)

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 Fgsdpfsyzza Ijx Ahnjc coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 Fsdpfx Aheyqx Rzenegc TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 12,270 h, functionality: fully functional, turning diameter: 150 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 220 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, overall weight: 5,700 kg, spindle nose: JIS A2-5, input voltage: 400 V, number of driven tool stations in tool turret 1: 10, number of tool stations in tool turret 2: 10, CNC Lathe DMG MORI NRX2000 MC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: MITSUBISHI M730UM Max. turning diameter: 150 [mm] Stroke X axis: 100 [mm] Stroke Z axis: 220 [mm] Rapid traverse rate X1 axis: 30000 [mm/min] Rapid traverse rate X2 axis: 30000 [mm/min] Rapid traverse rate Z1 axis: 30000 [mm/min] Rapid traverse rate Z2 axis: 30000 [mm/min] Spindle nose: JIS A2-5 Max. machining length spindle 1: 100 [mm] Max. machining length spindle 2: 100 [mm] Max. spindle speed - Spindle 1: 6000 [rpm] Max. spindle speed - Spindle 2: 6000 [rpm] Live tools power - Turret 1: 1.5 [kW] Live tools power - Turret 2: 1.2 [kW] Number of tool stations - Turret 1: 10 Max. speed driven tools - Turret 1: 10000 [rpm] Number of tool stations - Turret 2: 10 Max. speed driven tools - Turret 2: 10000 [rpm] Total power required: 38 [kVA] Supply voltage: 400 [V] Working hours: 12270 [h] Weight: 5700 [Kg] INCLUDED EQUIPMENT: x1 gantry loader x2 workstockers (left + right) for raw materials and finished workpieces x1 RENISHAW workpiece touch probe, type RLP40 (NEW) x1 drill bit breakage detection sensor (for turret N°1) x19 static tool holders x4 axial driven tool holders x2 KITAGAWA collet chucks, type KLAMP DKF65 x2 three-jaw chucks x1 status indicator lamp x1 coolant gun x2 remote electronic handwheels (Jogwheels) Fgedpsyzgc Usfx Ahnec x1 oil mist extraction unit x1 chip conveyor x1 high-pressure coolant unit, 35 [bar] x1 SIEBEC cutting fluid filtration unit type MP52D-AP18 x1 set of grippers for the gantry loader x1 set of axle clamping brackets for machine transport x1 complete set of manuals (users manual, programming manual, electrical diagrams, gantry loader manual...) Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine tool similar to a mill-turn center, machining center, and milling machine, and to brands such as Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, Mazak. CNC lathe, NC lathe, digital lathe, machining center, NC milling machine, CNC milling machine, digital milling machine, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 400 V, tank capacity: 60 l, DGUV certified until: 07/2027, Fermentolevain Fermento Plant for the preparation and preservation of liquid sourdough with dual care system for the best aromas Control of the fermentation and conservation phase easy-touch control Mixing time and speed adjustable Stainless steel version Removable stirrer with overflow probe and alarm buzzer Outlet height 440 mm Tank capacity 100/125 kg Cooling output drops approx. 6 ° C per hour Fodpofhdlnjfx Ahnsgc Connection 400V / 50Hz / 2.1kW, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH New machine with 12 months warranty Built-in scale Water connection with hand shower Cleaning cycle

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm Fgodpfxspumdce Ahnsc spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, nominal power (apparent): 25 kVA, torque: 135 Nm, controller manufacturer: Siemens, controller model: 828D, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 2,600 mm, total width: 2,310 mm, table width: 1,000 mm, table length: 550 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10 h, coolant supply: 30 bar, spindle motor power: 19,000 W, spindle nose: HSK63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical Machining Center VM800 - Demonstration Machine - Technical specifications: Control unit: Siemens 828D Milling spindle 12,000 rpm, HSK63 Internal coolant supply (IKZ) 30 bar Bed flushing Renishaw OMP60 touch probe (Heidenhain available on request) Renishaw TS27R tool measurement (Heidenhain or BLUM available on request) Direct measuring systems in X, Y, Z axes by Heidenhain Rotating inspection window SPINVISTA (Black Edition) Automatic door Robot interface Automatic power-off function Automatic tool changer (30 positions, HSK63) Centralized automatic lubrication system Telescopic way covers Fgedpjyr A T Ajfx Ahnoc Electronic handwheel for manual operation Signal lamp Machine operating manual Pneumatic air gun Water gun Air blow gun Chip conveyor Coolant tank 286L This and other machines from GEWA Werkzeugmaschinen GmbH are available for viewing at our facility in the Eifel region.

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, NEW NEW Convection oven Unox Bakertop X 10 Digital ID NEW NEW Convection oven for 10 trays, 600 x 400 Unox oven, intelligent performance Touch panel with 1000+ programs Core temperature probe USB port Top model with AI Only available from us, DGUV V3 certified Connection: 400V, 32A-CEE plug Water connection: 3/4 inch, water drain: DN 40 Dimensions: 860 x 1018 x 1219 mm, W x D x H Oven NEW & SAB tested 12 months warranty + spare parts service Option: Pure water filter Baking trays Lievox proofing cabinet Ethernet connection DDC.App Fsdpfjyaf Dmox Ahnjgc Exhaust hood with condensate condenser Spray & Rinse cleaner Service package Base frame Maintenance contract Delivery service Instruction and commissioning Visit our large showroom!

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Fjdjxcgtgepfx Ahnogc Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, usable tank capacity: 100 l, input voltage: 400 V, tank capacity: 100 l, total width: 820 mm, total length: 1,050 mm, total height: 1,690 mm, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, NEW +++ NEW Fermentolevain Fermento NEW +++ NEW TOP system for preparing and preserving liquid sourdough with Dual Care system for best flavors Control of the fermentation and preservation phases with integrated cooling easy-Touch control Mixing time and speed adjustable Stainless steel design Removable stirring tool with overflow – probe and alarm Discharge height 440 mm 2 stirrers, double flap Scrapers on the bottom and sides for high quality Tank capacity 100/125 kg Integrated frame heating and add-on cooling coil Cooling capacity per hour approx. 6°C reduction only available from us, DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH New machine & SAB inspected with warranty + spare parts service Optional: Integrated scale Fsdpjt Sckmsfx Ahnsgc Water connection with hand shower Cleaning cycle Maintenance contract Service package More TOP bakery machines in stock!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,450 mm, total length: 3,200 mm, total width: 2,850 mm, table width: 1,200 mm, table length: 600 mm, table load: 900 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,039 h, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Bridgeport XR1000 is special because it is a relatively heavy, high-quality vertical CNC milling machine that was built to be significantly stiffer, faster, and more accurate than standard VMCs (Vertical Machining Centers) in the same class. This machine has always been very well maintained by the previous owner (a sole proprietorship) and is therefore still in very good condition! Fgodoy Uklmopfx Ahnoc The machine is very well-equipped with various options and can also be viewed in our showroom while in operation. Additional options & accessories: - Controlled 4-axis (NIKKEN CNCZ 105ZA) - 20 bar coolant through the spindle. - Air to the spindle (not through it) - Coolant flushing system, wash down and wash gun. - Heidenhain touch probe TS27R. - Chip conveyor - Electronic handwheel (Heidenhain) permanently mounted on the PLC. - Original documentation + manual for the 4-axis. Weight & dimensions: approx. 6,500 kg approx. 3,200x2,850x2,450 (LxWxH)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, tank capacity: 30 l, DGUV certified until: 07/2027, Fermentolevain Fermento High-tech fermenter Plant for the preparation and preservation of liquid sourdough with dual care system for the best aromas Control of the fermentation and conservation phase easy-touch control Mixing time and speed adjustable Stainless steel version Removable stirrer with overflow probe and alarm buzzer Outlet height 440 mm Tank capacity 100/125 kg Cooling output drops approx. 6 ° C per hour Connection 400V / 50Hz / 2.1kW, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH New machine with 12 months warranty Built-in scale Fodpfxefhdlqj Ahnjgc Water connection with hand shower Cleaning cycle

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, machine/vehicle number: 2026, Unox Cheftop Countertop Plus Combination Oven NEW NEW NEW NEW NEW NEW NEW Unox Combination oven for cooking, baking, steaming, roasting, grilling & sous vide Touch control panel with 1000+ programs With 5 GN 1/1 shelves With core temperature probe Top-of-the-line combination oven Dimensions: 750 x 783 x 675 mm, W x D x H High-performance with Mind-Maps Water connection 3/4 inch Connection 400V, 32A-CEE plug New device & SAB tested With warranty + spare parts service Quality from an Unox specialist dealer & service partner! Fsdsxmrgtspfx Ahnogc Benefit from over 35 years of experience! Options: Hyper.Smoker GN sheet DET.Rinse ECO & Ultraplus SlowTop Ethernet connection DDC.App Spray & Rinse cleaner Pure water filter Maintenance contract Delivery service Instruction & commissioning Visit our Unox Centers!

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, number of axes: 3, This 3-axis Wenzel LH 87 CMM machine was manufactured in 2014. It features a measuring range of 800 mm in X, 1000 mm in Y, and 700 mm in Z, with a maximum component weight capacity of 800 kg. The machine is equipped with an air-bearing system across all axes and a Renishaw PH10M Plus motorized indexing probe head. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 87 CMM machine we have for sale. Contact us for further details. Fgjdsy Uvtvepfx Ahnjc - Volumetric Length Measuring Error (E0, MPE): 2.2 µm + (L / 300.0 mm) µm- Length Measuring Error along Optical Axis (E150, MPE): 2.2 µm + (L / 300.0 mm) µm- Max. Component / Workpiece Weight: 800 kg- Axis Bearings: Air-bearing system integrated across all axes- CNC Control Unit: WPC 3-axis contouring configuration- Controller Hardware: WPC2040 Basic combined with Renishaw PHC10-3 PLUS controller rack unit- Machine Control Panel: Wenzel HT400 wired manual joystick control handbox- Probe Head System: Renishaw PH10M Plus motorized indexing probe head- Probing Sensor System: Renishaw TP200 high-precision strain-gauge touch-trigger probe- Change Rack System: Renishaw SCR200 6-port autonomous stylus changer bridge (5 ports actively equipped in visual configuration)- Active Stylus Configurations (on-rack):* Port 1: Taster 1001 (Ø 1.00 mm)* Port 2: Taster 2001 (Ø 2.0 mm Cylindrical)* Port 3: Taster 3001 (Ø 2.00 mm Ruby Ball)* Port 4: Taster 4001* Port 5: Port 5 configured (Visual confirmation: angled/star setup)- Evaluation PC Hardware: Fujitsu Esprimo Desktop PC Tower housed in a dedicated lower-desk controller bay compartment- Visual Workstation Monitors: 2 x BenQ 24" TFT flat screen displays- Input Peripherals: Wired keyboard, mouse, and Wenzel-branded workflow mousepad- Core Operating System: Windows 10 Pro (Version 10.0, Build 19045, 64-bit Edition)- Metrology Software Suites:* Wenzel WM | Quartis Standard (Build R2025-1 / R2025-2 back-compatible ecosystem)* CM Wenzel CNC Control Geometry Software Module* CM Wenzel CNC Free-Form Surface Software Module- Software Licensing & Security: Metrokey Dongle Protection (ID: 45984, Status: Valid, Local Workstation), Driver Version 7.6.0- Native CAD Data Core Interfaces: STEP, NX, VDA-FS, IGES, EMD (Q-DAS), IMPEX-ELEM, CURVE, SURF, IPH, PRC- Optional Extension Interfaces: CATIA, Pro-E, SolidWorks- Included Calibration Accessories: High-purity Ceramic Reference Calibration Sphere complete with base extension column block

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit Fsdpjy Uvnyjfx Ahnjgc

Year of construction: 2020, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 12000 mm TRANSVERSAL TRAVEL: 1600 mm VERTICAL TRAVEL: 3600 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 13000 x 2500 x 300 mm SPINDLE: 450 - 5000 rpm; 34 kW; 830 Nm; ISO 50 HEAD: UNIVERSAL AUTOMATIC A/B AXIS ; MILLESIMAL POSITIONING Fsdszbnr Aspfx Ahnegc TOOL MAGAZINE: CHAIN-TYPE ; 100 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 87480 Kg ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; PAPER FILTER ; TOUCH PROBE ; PORTABLE HANDWHEEL NOTE: ROTARY TABLE 1500X1500, 1,5 rpm, MAX ADMITTED LOAD 15.000 Kg; HEAD LOADING/UNLOADING DOUBLE CRADLE; MOBILE WORKING PLATFORM; PERIMETER FENCES; STATIC RTCP OF ROTATING TABLES; STATIC RTCP IN THE SPACE ; AUTOCAL; VIBRATION DETECTION PROBE; COOLING TANK 1500L; GREEN MODE FUNCTION

Condition: ready for operation (used), Year of construction: 2021, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 350 - 1350 mm Fjdpfxozbnrij Ahnogc RAPID FEEDS X-Y-Z: 20 - 18 - 16 m/min SPINDLE: 6000 rpm; 30 kW; ISO 50 - DIN TABLE SIZE: 3000 x 1800 mm MAX ADMITTED LOAD: 10000 Kg HIGH PRESSURE COOLANT: 25 Bar TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 125 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 32706 Kg ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; MAGNETIC FILTER ; TOOL SETTER ; LINEAR SCALES ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, UNOX Bakertop 6 Countertop Plus Convection Oven BRAND NEW BRAND NEW BRAND NEW BRAND NEW BRAND NEW BRAND NEW BRAND NEW BRAND NEW BRAND NEW Technologically advanced combi oven for baking fresh or frozen products and for a variety of professional catering applications (dehydrating, steaming, low-temperature baking, sous-vide cooking, roasting, grilling, pan-frying, regeneration, and plated regeneration). Thanks to the Unox Intensive Cooking touch control and Intelligent Performance, perfect and repeatable results for any load size are guaranteed. Automated cooking process management (CHEFUNOX) ensures optimal results even for untrained personnel. • Convection oven for 6 trays 60x40 cm • Unox Intelligent Performance bakery oven • Touch panel with 1000+ programmable settings • Core temperature probe • USB port • Rotor.Klean automatic self-cleaning system Fsdpfx Aexmrlpjhnjgc • High-performance convection oven • Power connection: 400V, 32A CEE plug • Dimensions: 860 x 967 x 842 mm (W x D x H) • Oven BRAND NEW • With warranty and spare parts service Quality from your official Unox specialist and service partner! Benefit from over 35 years of experience! Options: • Pure water filter • Baking trays • Lievox proofing cabinet • Ethernet connection (DDC.App) • Extraction hood with condensation unit • Spray & Rinse cleaner • Service package • Undercounter stand • Maintenance contract • Delivery service • On-site instruction & commissioning Visit our Unox Baking Center!

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, table width: 650 mm, table length: 2,600 mm, table load: 2,300 kg, overall weight: 12,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 28,000 W, tool weight: 10,000 g, number of axes: 3, This 3-axis IBARMIA ZV 40 L2200 vertical machining centre was manufactured in 2000. It features an X-axis travel of 2200 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine has a maximum table load capacity of 2300 kg and a rapid traverse rate of 30 m/min. If you are looking to get high-quality machining capabilities, consider the IBARMIA ZV 40 L2200 machine we have for sale. Contact us for further details. - X-axis travel in 2-station machining (shuttle operation): 720 mm- Z-axis travel (vertical): 600 mm (Optional: 800 mm)- Number of T-slots: 5- T-slots size: 18 mm- Distance between T-slots: 125 mm- Min./Max. distance spindle nose to table: 200 / 800 mm (Optional: 1000 mm)- Tool taper / holder: SK40 - DIN 69871 (Options: HSK A-63 DIN 69893 or HSK A-80 DIN 69893)- Pull stud for SK tool holder: DIN 69672- Clamping force of tool retention (SK): 12000 N (Options: HSK A-63: 18000 N / HSK A-80: 28000 N)- Inner bearing diameter: 80 mm- Max. standard spindle speed: 6000 rpm (Options: 4000 / 8000 / 10000 rpm)- Main spindle motor power at 100%: 28 kW (Intermittent: 38.5 kW)- Constant power for standard configuration from: 1500 rpm- Max. torque at 100%: 178 Nm (Intermittent: 245 Nm)- Feed force in X, Y, Z at 100%: 13000 N (Intermittent: 15600 N)- Rapid traverse rate in X, Y, Z: 30 m/min- Max. working feed rate in X, Y, Z: 10 m/min- Positioning tolerance Tp X(1000mm)-Y-Z: 0.015 mm- Max. positioning scatter Ps max.: 0.010 mm- Measuring system in X-Y-Z: Linear glass scales- Milling capacity in steel (St 60): 650 cm³/min- Drilling capacity in steel (St 60): Ø 60 mm- Tapping capacity in steel (St 60): M-36- Number of tool pockets: 24 (Options: 40 - 52)- Max. tool length: 300 mm- Max. tool weight: 10 kg- Max. tool diameter (full magazine): 85 mm- Max. tool diameter (adjacent pockets free): 125 mm- Tool management: Random- Tool change time: 3.5 s- Chip-to-chip tool change time: 7 s- Floor space requirement: approx. 17 m²- Coolant tank capacity: 370 liters- Machine length (Dimension A): 4200 mm- Textured paint structure (2 colors): RAL grey 7037 / blue 5012- Electrical connection: 55 kW- Operating voltage: 400 V / 50 Hz- Compressed air connection: 6 bar- Coolant pump power: 0.75 kW- Standard equipment: CE machine enclosure protection, chip conveyor, coolant tank, linear glass scales in X/Y/Z axes, vertical interior cladding along X-axis, workspace lighting, automatic centralized lubrication, hydraulic counterweight balance for spindle head, automatic pneumatic spindle cleaning, mobile control panel, rigid tapping (tapping without compensation chuck).- Factory options available: Internal coolant supply (IKZ), full machine enclosure, partition wall for shuttle operation, dividing heads/rotary tables for 1 or 2 additional machine axes, work tool touch probe, digitization systems, tool monitoring systems, portable electronic handwheel- depending on the requirements, parts in the Y-axis would need to be replaced or repaired Fgjdpfjy Umlpox Ahnec

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Fgjdpfexyungox Ahnsc Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control. Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Fjdpfx Ahswqrvlonogc Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg 🧰 Perfect For Precision component manufacturers Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Dell Computer Wide Screen Monitor Printer Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 1992, Table clamping surface 1850 x 710 mm Permissible table load 3000 kg Travels: Longitudinal, automatic (X) 1600 mm Transverse, automatic (Y) 710 mm Vertical, automatic (Z) 850 mm Spindle holder SK 50 Speed range 20 - 3000 rpm Fodpjttamkjfx Ahnjgc Main motor power, AC 15 kW Transport dimensions L x W x H 3650 x 2300 x 2700 mm Weight 9400 kg Accessories / Special features: - CNC contouring control make HEIDENHAIN model TNC 360 with 3 scales - Programming language "plain text dialog" and DIN-ISO - Electronic handwheel HEIDENHAIN HR 330 with magnetic holder - 3-D touch probe HEIDENHAIN TS 120 - Main spindle compact unit RAC 3 - Control prepared for 4th axis - Universal milling head system "HURON with 2 levels, oil lubricated - Hydr. tool clamping - Coolant device - Central lubrication with interval - German electrics, INDRAMAT drives - Suspended control panel Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Axes: 4 Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual Fgodoy Txycepfx Ahnoc

Condition: refurbished (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, center height: 180 mm, workpiece weight (max.): 200 kg, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 500 mm, total width: 2,600 mm, total length: 4,700 mm, total height: 2,200 mm, grinding diameter: 300 mm, workpiece weight between centers: 200,000 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 1,000 mm, grinding wheel width: 100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 10 rpm, feed length X-axis: 320 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,500 m/min, grinding spindle speed: 1,700 rpm, overall weight: 7,500 kg, pivoting range: 30 °, warranty duration: 12 months, year of last overhaul: 2023, input frequency: 50 Hz, rapid traverse X-axis: 1,000 m/min, rapid traverse Z-axis: 1,500 m/min, input voltage: 400 V, Schaudt PF43 U1000, manufactured in 1994, retrofitted (premium refurbished) by GSN in 2023. Siemens Sinumerik 840 D SL control system. Low operating hours, approximately 3000 hours since the retrofit. MK4 workpiece spindle, MK4 tailstock. Fgsdpfx Ahezcfnqenec Grinding travel: 300mm Workpiece length, including clamping devices, at maximum grinding travel: 450mm Grinding wheel dimensions: 500x100mm Bore diameter: 203.2mm Controlled workpiece circumferential speed (WUG) SUG external cylindrical grinding spindle: 45m/s Freely positionable, automatic B-axis Machine with new, fully enclosed splash guard GSN measuring head Diatronic 22 including C2 and W axes/turret Touch probe sensor with hydrophone (water jet) including collision monitoring Tailstock retrofitted with automatic cylinder error compensation Clamping/unclamping adjustable via hydraulic clamping device Upgrade to a 15" screen on the control panel NEW PRICE GROSS 2023: €407,432.20 plus additional tools, etc.