5 axis machining center

MIKRON HPM 1150U

Condition: good (used), Year of construction: 2011, functionality: fully functional, Discover the used 5-axis machining center DECKEL MAHO DMU 60 eVo, manufactured in 2011. This machine is equipped with a Siemens control system and, thanks to features such as internal cooling, a measuring probe, and laser measuring, offers the highest precision for complex manufacturing tasks. A very well-maintained and immediately ready-for-use machining center for demanding users. Technical data of the Deckel Maho DMU 60 eVo: Travel in X-axis (mm) 650 Travel in Y-axis (mm) 500 Travel in Z-axis (mm) 500 Travel in B-axis -5/+110 C-axis nx360 Number of axes 5 Spindle speed (rpm) 14000 Spindle power (kW) 18.9 Tool interface SK40 Knjdpfx Akjzq Eghs Asa Weight (kg) 10000 Machine hours (h) 15995 Year of manufacture 2011 Control system Siemens 840D SL Control type CNC Total power requirement (kW) 50 kVA Weight (kg) 10000 kg Location Baden-Württemberg Delivery September 2026 Equipment and accessories: -Internal cooling -Chip conveyor -Laser measuring -Measuring probe -3D-quickSET for checking and correcting the 4- and 5-axis kinematics -Band filter -Used tool holders -Coolant gun

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 15 h, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 130 kW (176.75 HP), fork length: 1,200 mm, empty load weight: 21,810 kg, total length: 7,820 mm, drive type: Diesel, construction width: 2,490 mm, Rotating telehandler Load center: 600 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Kedsxya H Uspfx Ak Aona Front tire size: 445 65 R22.5 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 445 65 R22.5 Rear tire condition: 80 - 100% Third control valve, heating, full cabin, air conditioning, Remote control, work platform pre-installation, free return flow

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm Ksdsp Audqepfx Ak Aona MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Year of construction: 2012, condition: used, max. wheel diameter 180 mm gear width ca. 220 mm max. module 3 / 5 mm Control Siemens 840D sl max. radial velocity 5000 mm/min max. workpiece diameter 180 mm table rotation speed 800 U/min table diameter 145 mm axial travel 250 mm mm axial travel 300 mm clamping force max. 13 kN swivelable +/- 45 ° drive capacity 23 kW turning speeds 6000 U/min diameter of tools max. 90 mm tool clamping length max. 211 mm module hobbing max. 3 module profile milling max. 5 tangential speed max. 7500 mm/min weight of the machine ca. 9,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine Knedpfxsymf Dae Ak Aja - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm

Condition: good (used), Year of construction: 1993, ELB surface grinding machine Year: 1993 Magnetic table size: 1500x550 mm With automatic downfeed With wheel dresser Ksdpfx Ajygtiwsk Ajna Paper band type coolant tank Lots of grinding wheels

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Knsdpsx Haryefx Ak Asa Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW Knodpowm Rm Isfx Ak Aea total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm Kedpfowh Sigjx Ak Aena AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Knjdpfx Asvf D Anok Aea

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm Knedpjhktd Nefx Ak Asa 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.