Used Transformer 20Kv for sale (763)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 4,256 h, functionality: fully functional, turning length: 570 mm, turning diameter: 176 mm, travel distance X-axis: 245 mm, travel distance Z-axis: 570 mm, controller model: MSG-805 V, TECHNICAL DETAILS Turning diameter: 176 mm Turning length: 570 mm Swinging diameter: 510 mm Machining diameter: 420 mm Travel X-axis: 245 mm Travel Z-axis: 570 mm Rapid traverse X/Z-axis: 24 m/min Spindle bore: 43 mm Spindle speed: 60–6,000 rpm Tailstock diameter: 85 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: MSG-805 V Total power requirement: 5.5 kW Hodpszul Tvefx Ak Ujnu Dimensions & Weight Footprint: approx. 2,000 × 1,700 × 1,800 mm Machine weight: approx. 3,400 kg Operating hours: 4,256 h EQUIPMENT Integrated CNC control system Inductively hardened flat guides for bed and cross slide Continuously variable AC main spindle drive Programming of constant cutting speed Integrated cold light Power meter for main spindle drive Operator controls for automatic and manual operation CNC programming and control panel Tailstock with hydraulically actuated quill, MK 4 Continuously variable quill pressure Programmable actuation of the tailstock quill via toggle switch and M function High-dynamic three-phase servomotors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and nozzle Electric 12-station turret system MORI SEIKI Automatic direction logic on the turret Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Full enclosure of the work area Front sliding door with large viewing window Electrical preparation for chip conveyor Electrical equipment according to VDE 0113 Data interface V.24 / RS-232-C Mounted control cabinet Freestanding transformer: 400 V / 200 V

Condition: ready for operation (used), Year of construction: 2001, operating hours: 27,267 h, functionality: fully functional, turning length: 180 mm, turning diameter: 100 mm, spindle bore: 43 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 125 mm, travel distance Z-axis: 195 mm, TECHNICAL DETAILS Hsdjzul T Nopfx Ak Ujnu Turning diameter: 190 mm Turning length: 180 mm Max. turning diameter: 100 mm Travel X-axis: 125 mm Travel Z-axis: 195 mm Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 20 m/min Spindle bore: 43 mm Spindle bearing diameter: 80 mm Spindle speed range: 60–6,000 rpm Tailstock diameter: 40 mm Tailstock taper: MK 3 Tailstock travel: 45 mm Number of tool positions: 10 MACHINE DETAILS Transformer: 400 V / 200 V Data interface: V.24 / RS-232-C Operating hours: 27,267 h EQUIPMENT Bar feeder Integrated CNC control Space-saving, compact design Inductively hardened flat guideways for bed and carriage Continuously variable AC main spindle drive Constant cutting speed programming Integrated cold light Ammeter for main spindle drive Swiveling central control panel Controls for automatic, manual, and CNC programming modes Three-phase servo motors for X and Z axes Backlash-free, pre-tensioned precision ball screws for X and Z axes Automatic central lubrication with electrical monitoring Coolant system with tank, pump, lines, and spray nozzle Electric 10-position turret system, MORI SEIKI Automatic turret indexing logic Direct coolant supply through the turret disk Fixed hydraulic unit for power chuck Front sliding door with large viewing window Electrical connection for chip conveyor, prepared Electrical equipment according to VDE 0113 Attached control cabinet Freestanding transformer

Condition: ready for operation (used), Year of construction: 2005, operating hours: 7,500 h, spindle motor power: 18,500 W, spindle speed (max.): 3,500 rpm, travel distance Y-axis: 120 mm, overall weight: 5,800 kg, number of axes: 4, This 4-axis DMG Mori Seiki SL 2500 Y was manufactured in 2005. It features a maximum swing diameter of 755 mm and a machining diameter of 390 mm, with a maximum machining length of 655 mm. The machine includes a 12-station turret and a programmable hydraulic tailstock. If you are looking to get high-quality turning and milling capabilities, consider the DMG Mori Seiki SL 2500 Y turn-mill centre we have for sale. Contact us for further details. Hnjdpezuymqsfx Ak Usu • Capacity & working area: • Max. swing diameter: 755 mm • Max. machining diameter: 390 mm • Max. machining length: 655 mm • Bar capacity: 75 mm • Rapid traverse: 18 m/min (X) / 24 m/min (Z) • Guideways: Box ways on all axes • Main spindle & headstock: • Spindle torque: 640 Nm • Spindle nose: A2-8 • Chuck: 250 mm Kitagawa B-210 (metric) • Cooling: Daikin spindle oil chiller • Turret & live tooling: • 12-station turret (all stations motorized) • Turret indexing time: 0.2 s • Live tooling speed: 4,000 RPM • Live tooling motor: 5.5 kW • Tooling system: Sandvik Capto quick change tooling system (valued at €22,000–€24,000) • Tailstock & axes: • Axis configuration: 4-axis (X, Z, Y, C) • Tailstock: Programmable hydraulic tailstock • Tailstock taper: MT5 Morse taper • Control, software & measuring: • 3D graphic simulation via proprietary CAM software • Cycle time verification • Automatic load control & tool wear monitoring • Tool measurement: Automatic Renishaw tool presetter arm • Connectivity: USB, PCMCIA, RS-232 Additional equipment • Bar feeder interface (machine prepared) • Interface for Autoblok hydraulic steady rest (ready for installation) • Automatic parts catcher • Hinge-type side chip conveyor • Large assortment of static and live tool holders • Dual foot pedal (main chuck & tailstock operation) • Electrical transformer • Complete documentation: Parts list, electrical schematics, programming & operating manuals Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Second-hand Weinig Unicontrol 6 control cabinet, suitable for use as a source of spare parts or for building a new control cabinet. Contents include, amongst other things: Hilger & Kern brake unit Hnsdpfsztvt Rox Ak Uju Rathgeber ET 1000 transformer

Condition: ready for operation (used), Year of construction: 2018, operating hours: 17,822 h, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, table load: 250 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 4,900 W, number of axes: 4, This 4-axis Brother Speedio S700 X1 was manufactured in 2018. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 300 mm. The machine includes a table size of 1150 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the Brother Speedio S700 X1 vertical machining centre we have for sale. Contact us for further details. • Table size: 1150 x 400 mm • Spindle taper: 7/24 No. 30 (Big-Plus) Dual Contact / BT30 • Tool shank: MAS-BT / BBT30 • Retention knob: MAS-P30T-2 (30°) • Tool changer: 21-tool carousel, total load capacity 35 kg Hodpfjz Hmn Nex Ak Uonu • Tool change time (tool-to-tool): 0.8 s • Tool balance limit: 50 g • Rapid traverse rates: X 50 m/min, Y 50 m/min, Z 56 m/min • CNC control: CNC-C00 • Machine control indicated readings (recorded : Total operation time 17,822 h; Power-on time 33,212 h • Excluded equipment: External hydraulic unit Additional equipment • Hydraulic fixing table • Renishaw broken tool detector • Transformer / power supply unit • HAKUSAN chip conveyor • Emulsion mist separator SARA UC 1 SD

Condition: ready for operation (used), Year of construction: 2021, overall weight: 217 kg, load capacity: 6 kg, arm reach: 2,011 mm, number of axes: 6, This 6-axis PANASONIC TAWERS TM-2000WG3 Super Active Wire was manufactured in 2021. It features a maximum reach of 2,011 mm and a payload capacity of 6 kg. The system includes a 350 A welding power source and is equipped with advanced welding processes such as SP-MAG and Pulse MAG. If you are looking to get high-quality welding capabilities, consider the PANASONIC TAWERS TM-2000WG3 Super Active Wire robot arm we have for sale. Contact us for further details. • Welding power source: 350 A • Welding processes: SP-MAG / Pulse MAG (MIG optional; TIG DC optional) • Repeatability: ±0.10 mm or better • Maximum robot rapid movement: up to 180 m/min • Motion ranges: base ±170°; upper arm -90° to +165°; forearm -80° to +210°; wrist rotation ±270° • Maximum axis speeds: base 195°/s; upper arm 197°/s; forearm 205°/s; wrist up to 629°/s • Wire feeding capability: Super Active Wire • Safety system: CE compliant Additional equipment • Güdel TMF-1 linear track (2,000 mm travel; repeatability ±0.02 mm) with drive, servo control and track structure • 2 × Panasonic servo-controlled rotary positioners + positioner servo control system • 2 × workpiece frames (approx. 3,500 × 1,500 mm) providing 2 welding/loading stations • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • Robot/positioner support structures • 2 × safety light curtains and complete cell guarding • Control and integration system • Robot controller / control cabinet Main Components Included Hnsdpfoz Dtn Djx Ak Usu • Panasonic TM-2000WG3 welding robot • Panasonic 350 A welding power source • Robot controller / control cabinet • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • 2 × Panasonic rotary positioners • Positioner servo control system • 2 × workpiece frames • Güdel TMF-1 linear track, 2 m • Linear track drive • Linear track servo control • Güdel track structure • 2 × safety light curtains • Robot / positioner support structures • Complete cell guarding • CE safety system • Control and integration system

Condition: ready for operation (used), Yoshikawa 6 kVA transformer – 50-60 Hz, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Hjdoz Dduhjpfx Ak Ujnu

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with powered tools, chip conveyor, automatic tool measuring system, chip evacuation conveyor, and bar feeder. Put into operation 11/2014 Control system OSP-P300L CNC with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of 03/18/2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours And increasing. Power consumption 33.1 kVA Technical data Max. swing diameter 480 mm (approx. based on the current chip conveyor design) Max. machining diameter 340 mm Max. turning length 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 interface, 80 mm bore, integrated motor Speed range 45 - 5,000 rpm Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001° increment Sub-spindle Speed range 50 – 6,000 rpm Hnodpfxsz Hk R Ue Ak Ueu Power/continuous operation 11 kW/7.5 kW Spindle with 140 mm interface, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub-spindle travel - NC axis W travel for W450: 595 mm Spring-loaded part ejector from the sub-spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub-spindle Turret Number of tool positions 12, both fixed and powered BMT60 (not VDI) Tool mounting in. 25 x 25 mm Tool mounting out. diameter 40 mm Powered tools Drive power 7.1/4.1 kW Speed range 45 – 6,000 rpm Feed speeds Rapid traverse in X and Z axes 25/30 m/min Rapid traverse in C axis 200 rpm Travels X-axis 260 mm Z-axis 510 mm Y-axis 115 mm (+70 mm / -45 mm) Machine data Width 3330 mm – without bar feeder and chip conveyor Depth 1800 mm Height 2250 mm Machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF 3D machining process simulation Cutting time overrun check Load monitoring (spindle, feed axes) NC operation monitoring (including part counting) Function for reducing cycle time Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Bar feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction unit Equipment for the machine: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm) 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub-spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial holder - 5X Tool holder, turning - 5x Tool holder, boring bar - 2x Front-end drive, double-sided - 3x Front-end drive, side - 3x Reduction sleeve (manufactured from stock material) Reduction - nylon diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: refurbished (used), functionality: fully functional, spindle bore: 40 mm, center height: 165 mm, center width: 750 mm, quill stroke: 85 mm, total length: 1,800 mm, total width: 1,300 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,100 kg, Dear Sir or Madam, We are offering for sale a Weiler Condor B lead and draw spindle lathe in fully refurbished condition! This model is particularly distinguished by its extremely user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B is in the size range between the Weiler Praktikant and the Weiler Commodor and is therefore a true all-rounder in any workshop. The machine will undergo extensive refurbishment in our workshop, so that it will be in like-new condition both technically and visually! The following work will be carried out during the refurbishment of the machine: - Basic cleaning - Repainting - Overhaul of the guideways - Replacement of all lubricants - Replacement of all standard parts such as handles, buttons, screws, etc. - Replacement of all wear parts such as belts, chains, wipers, etc. - Replacement of all electronic components such as contactors, transformers, switches, etc. Hjdpoztf A Uofx Ak Ujnu - Documentation with test report, parts list, and geometry report Availability: upon request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mounting: short taper DIN55027 size 5 with bayonet lock Quill stroke: 85mm Spindle speeds: 22-2800 rpm Possible thread types: metric, inch, module, diametral pitch Metric thread pitches: 0.18 - 28mm Spindle brake: can be switched on Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional equipment and accessories: chuck guard (NEW), coolant system, 2x emergency stop, lead and draw spindle cover (optional), K+C digital display NEW (optional), operating manual, technical documents, and much more on request... Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are workshop-tested at least. - All lubricants and any worn parts will be replaced beforehand - If desired, we will completely or partially overhaul the machine of your choice - If desired, we will repaint the machine of your choice in your desired color - If desired, you can order additional accessories such as tools, etc. directly with your order - If desired, we can install additional accessories such as safety devices, etc. - We will be happy to take care of the shipping and/or delivery

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Hjdoz Akmkspfx Ak Ujnu Also capable of book-of-one production. Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Production speed: 400–1,000 cycles/hour Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . Hnjdpsz D U Dasfx Ak Ueu TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 680 mm, spindle motor power: 26,000 W, total height: 2,000 mm, total width: 2,050 mm, overall weight: 6,600 kg, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Mazak QT NEXUS 300 was manufactured in 2009. It features a maximum cutting diameter of 420 mm and a maximum swing of 680 mm. The machine is equipped with a drum turret with 12 stations and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak QT NEXUS 300 horizontal turning machine we have for sale. Contact us for further details. • CNC: Mazatrol Fusion 640T Nexus (8.4" color LCD) • CE marked • Capacity • Max bar diameter: 77 mm • Max cutting diameter: 420 mm • Max swing: 680 mm • Spindle bore: 88 mm • Spindle center height: 1,080 mm • Max chuck workpiece weight: 450 kg • Main spindle • Max spindle torque: 600 Nm • Spindle nose: A2-8 • Chuck: 10" through-hole, type B210A815X • Axes • Cutting feedrate: X 8 m/min, Z 8 m/min • Rapid traverse: X 30 m/min, Z 25 m/min • Turret • Type: Drum turret • Stations: 12 • Turning tool shank: 25 × 25 mm • Indexing time: 0.8 s (½ turn), 0.2 s (single step) • Tailstock • Programmable, motor-driven movement • Stroke: 645 mm • Taper: No. 5 Hodpsz Eavwjfx Ak Ujnu • Dead centre included • Live centre: NSK LC-5SW (speed up to 4,000 rpm) • Thrust selection: 10 levels • Control equipment and functions • Mazatrol Fusion 640T Nexus • Interfaces: RS-232C, Network • Background tool-path check • Machining Navigation – Prediction / Monitor / Results • Velocity and feedrate control • Tool path storage • 3.5" FDD unit • Coolant / machine equipment • Complete coolant system (tank 210 L, pump 520 W) • Preparation for side chip conveyor • Automatic tool eye • Hydraulic chuck pressure interlock • Chuck open/close confirmation • Double foot switch • Full chip and coolant guarding • Work light • Electrical • Power requirement (30 min rating): 49.69 kVA • Continuous power requirement: 43.83 kVA Additional equipment • European-market power transformer • Foundation plates • One set of adjusting tools • Manuals included Technical Specification Driven Tools No Counter Spindle No

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Hnsdpszzvgasfx Ak Uou Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782.

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Hodpoz E Nh Njfx Ak Uenu Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: used, mileage: 292,145 km, power: 105 kW (142.76 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 2,456 kg, maximum load weight: 1,044 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, fuel consumption (urban): 9.5 l/100km, fuel consumption (extra-urban): 7.5 l/100km, fuel consumption (combined): 8.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 5,926 mm, Year of construction: 2017, construction height: 3,000 mm, Equipment: ABS, traction control, This Mercedes-Benz Sprinter 314, first registered in May 2017, is designed for daily commercial use. With a 2,143 cm³ engine, manual transmission, and a mileage of 292,145 km, it provides a solid foundation for tradespeople, installers, service technicians, and business owners looking for a versatile van. The existing shelving system offers real practical added value: tools, materials, and spare parts can be stored neatly and are quickly accessible. This saves time on every job and transforms the cargo area into a functional mobile workspace. This makes the Sprinter ideally prepared for assembly, customer service, and service calls. Hnodpjzqvzcjfx Ak Ueu Get in, load up, and get straight to work: Anyone looking for a functional van with a pre-installed shelving system will find a versatile companion for everyday work here. Whether for trades, service, or material transport, this Sprinter is ready for its next assignment and new tasks. For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 307 mm, turning diameter: 250 mm, spindle bore: 51 mm, travel distance X-axis: 185 mm, travel distance Z-axis: 370 mm, Key figures at a glance: Hsdpfx Aszr Ir Aek Uonu 250 mm maximum turning diameter, 420 mm swing over bed, 307 mm maximum turning length, 51 mm spindle bore, 4000 rpm maximum spindle speed, 5.5/7.5 kW main motor, an 8-station turret, 185 mm X-axis travel and 370 mm Z-axis travel. The year of manufacture is 2004 and the control system is a Fanuc Series 21i-TB. The machine plate states a supply of 220 V, three phase, 50/60 Hz, 42 A and a maximum power supply of 16.1 kVA, with control voltages of 100 V AC and 24 V DC. Buyers on a 400 V network should plan for a matching transformer. The approximate footprint is 1600 x 1280 x 1890 mm at a weight of around 2800 kg

Year of construction: 2008, condition: ready for operation (used), A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible. Hodpjzlt R Djfx Ak Usnu

Year of construction: 2008, condition: ready for operation (used), A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible. Hsdpfx Ajzlt Sbsk Uonu

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible. Hodpfx Akjxaphno Usnu

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar loader. * Interface for bar loader installation. * Rear automatic part pick-up with special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, Hsdez Sx Nqjpfx Ak Ujnu programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * High metal removal rate machine. * Box guideways on all axes. * Quadruple box guideway system on the Y-axis. * Extremely rigid structure. * Oil-fed guideway lubrication system with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * High-torque 18.5 kW motor. * Cutting torque: 580 Nm. * Chip evacuation capacity: 540 cm³/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool usage monitoring. * Parametric automatic tool anti-collision system. * Communication ports: USB, PCMCIA card, and RS-232. * Tool life management and usage tracking. * Automatic control of torque and tool stress. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * 36-tool magazine. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. Hnodpfxsz Sx Rhj Ak Uou * Independent Knoll coolant system (70 bar pressure). * 30-micron particulate filter system. * LTA mist filtration system. * Rear-mounted hinge-type chip conveyors. * Machine currently in production. * Inspectable by a qualified official Okuma technician. * Condition: Like new. * Extensive BT 50 tooling/holder package. * Includes electrical transformer, documentation, parts list, electrical schematics, and programming/operation manuals. * Machine weight: 20,500 kg. * Immediate delivery available (subject to prior sale).

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 3 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE Hnedpfx Aksy I Dixe Uju - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 38 [mm] - C axis indexing precision : 0.0001 [°] TURNING-MILLING SPINDLE - X/Z stroke : 455/800 [mm] - Y stroke : 105 [mm] - B Axis stroke : 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : HSK50 - Spindle speeds : 30000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 48 [kVA] MACHINE HOURS - Number of working hours : 18186 [h] EQUIPMENT - CNC : FANUC 31i MAPPSIV - Linear scales - Tailstock option with counterspindle - Tool probe - Workpiece probe : Renishaw - Bar loader : IEMCA KID 80 - Electric transformer

Condition: ready for operation (used), Year of construction: 1995, input voltage: 400 V, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: BWO, MAKA HC 57 R (Robot) CNC Machining Center 5-Axis Type HC-57 R / Machine No. 420 747 / Year of manufacture 1995 / Circuit diagram no. 320 177 The machine is operational and exceptionally robustly constructed (milling spindle, tool changer, vacuum pump, support, etc.) and equipped with existing electronics (control unit, circuit boards, transformer). It shows age-related wear in areas such as wiring, pneumatic lines, central lubrication lines, etc. It runs and is ready for operation, but due to the above-mentioned wear, it is being offered as a source of spare parts or for refurbishment. Collection from 41334 Nettetal, workshop edge. Hnjdpfsz R Dqqjx Ak Ueu Price negotiable. If no buyer is found for the assembled, complete machine, the machining center will be dismantled. The spare parts will then be offered individually. Interested parties in MAKA spare parts can contact us in advance regarding details or spare parts inquiries.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 27878-01, type of input current: three-phase, input voltage: 11,000 V, input frequency: 50 Hz, input current: 2,900 A, ABB Limited low-voltage main switchgear / main distribution switchboard. Serial number: 27878-01 Year of manufacture: 2012 Type: Low-Voltage Main Switchgear / Main Distribution Switchboard Nameplate data: Hnedpfx Ajzz I T Eok Uou Supply: 415 V AC, 3-phase, 4-wire, 50 Hz Auxiliary circuit voltage: 240 V AC Main busbar rating: 2900 A Main busbar fault level: 50 kA for 1 second (nameplate). The site equipment card also states 55 kA for 1 second. Degree of protection: IP31 Conformity: BS EN 60439-1, BS EN 60947-1, 73/23/EEC, CE Main breakers: ABB SACE E2 air circuit breakers (ACB) Interconnection ACB to Section C busbars Withdrawable PDU outgoing modules Metering / instrumentation cubicles with digital meters Associated with Transformer 1C / PDU distribution. Some compartments are marked Danger 11 000 V (HV / transformer cable side). Manufacturer: ABB Limited, Hanover Place, Sunderland, England, SR4 6BY. Condition: used, installed in a plant room. Price on request. Nameplate and cubicle photos available.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 100, number of axes: 4, This 4-axis HELLER H5000 horizontal machining centre was manufactured in 2021. It features a working range of 800 mm in all axes and a maximum workpiece diameter of 900 mm. The machine includes a tool taper of HSK-A 100 and a tool magazine capacity of 100 slots. If you are looking to get high-quality machining capabilities, consider the HELLER H5000 machine we have for sale. Contact us for further details. Hnodpfx Akoz Ixt Hs Uou - Machine Count: 2 units- Control Unit: Siemens SINUMERIK 840D solution line with 24" Multitouch Main Control Panel and HELLER Operation Interface- Working Range (X/Y/Z Axes): 800 / 800 / 800 mm- Drive Package: POWER Package (Standard Drive in X/Y/Z)- Rapid Traverse (X/Y/Z Axes): 50 m/min- Acceleration (X/Y/Z Axes): 5 m/s²- Feed Force X- and Y-Axis (ED S3 -40%): 15,000 N- Feed Force Z-Axis (ED S3 -40%): 20,000 N- Feed Axis Servomotors: Incremental Encoders- Linear Axis Positioning Tolerance (Tp): 0.005 mm- Working Unit: PC 100 i Power Cutting Unit (10,000 rpm, 45 kW, 360 Nm)- Tool Taper: HSK-A 100 according to DIN 69 893- Tool Magazine: 100 Slots, Chain Type (HSK-A 100) with Comfort Operator Terminal at Tool Setup Station- Tool Breakage Control: Fast Drill Breakage Control- Collision Monitoring: Damage Minimization Monitoring System- NC Rotary Table (B-Axis): 360,000 x 0.001 deg Indexing, 25 rpm, 8 arcsec Accuracy, 12,000 Nm Max. Tangential Moment, 18,000 Nm Max. Tilting Moment- Plane Transformation: CYCLE 800- Workpiece Setup Station: Manually Rotatable 4 x 90 deg- Workpiece Clamping Interface: 5-way Media Interface, Hydraulic Pressure 200 bar Proportional Technology- Pallets: 2 Special Pallets in Basic Machine (HELLER Drawing AP.205705) with DIN Hole Pattern- Pallet Dimensions: 630 x 630 mm- Max. Workpiece Diameter: 900 mm- Max. Workpiece Height: 1,000 mm- Max. Clamping Load (Pallet 1): 1,000 kg (single-sided) / 1,400 kg (double-sided)- Pallet Change Time: 13 s (without hydraulic clamping) / 13.5 s (with hydraulic clamping)- Coolant & Chip Conveyor: Scraper Belt Conveyor for Wet Machining- Cooling Systems: Precision Water-Air Chiller Unit (Compressor) for Direct Drives of A- and B-Axes, Spindle, and Control Cabinet; Coolant Temperature Control Unit- Mist Extraction: Emulsion Extraction System- Electrical Connection: 3~ 400 V / 50 Hz, Nominal Current 65 A, Short Circuit Rating 9 kA- Total Connected Power: approx. 37 kVA (Machine) + approx. 14 kVA (VRF Coolant Unit)- Compressed Air Supply Pressure: 5 - 6 bar- Permissible Ambient Temperature: 10 - 45 °C- Material Processed: Aluminum (exclusively)- Operating Hours: approx. 12,000–15,000 hours (pending confirmation)- Operational Status: Currently installed/in place and powered onOptional Machine Equipment:- Special Mount: Multi-Spindle Heads (HELLER Drawing 00.882914 MAGNA)- Tool Measurement: RENISHAW Radio Touch Probe RMP 60 with Receiver & HELLER Measuring Cycles- Coolant Filtration Unit: Vacuum Rotary Filter KNOLL VRF 250 with 50 bar High-Pressure Internal Coolant Supply (IKZ), Working Area Flushing, 1,200 L Tank Capacity Technical Specification Taper Size HSK 100