Used Turret Winder for sale (1,919)

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Nedpfxetiy Nts Ag Iewc Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO Nwsdpfx Agsu T Shve Ioc CNC Twin Spindle, Vertical Turret Lathe Mfd. 2018 S/N 1100619, EMAG CNC control, (2) 12-station turrets, Chip conveyor, Full automation system Hennig system Hours: 4,684 2 Machines Available 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Condition: good (used), Tsugami Swiss Type CNC Lathe Model B038T (2) machines available 2019 and 2021. Identical machines.  Attached are photos of the 2019 machine Njdjrbl Ehjpfx Ag Iowc Sliding headstock 12 axis (9 standard cutting axis plus 3 axis turret) 8 station turret (3 axis) 5,000 RPM Main Spindle 7,000 RPM Sub Spindle 5,000 RPM Front Tool Post Cross Drill Speed 6,000 RPM Back Tool Post Live Tool Speed 15 HP Main Spindle 7.5 HP Sub Spindle Equipped with: Fanuc Series 31i Model B CNC Control LNS Chip Conveyor 12' FMB Turbo 3-38 Bar Feed Parts Conveyor High Pressure Coolant (MP Systems)   Feel free to inspect under power. Sold as is where is, inspections are welcomed Buyer responsible for prepping machine for shipping Brand new B038T replacement cost is over $426,000 (with the same options) with 4 – 5 month lead time.

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control Nedpfxoq Npqme Ag Iowc 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM Njdpjw Dvnxofx Ag Iewc SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand HAAS Main Drive Spindle speed range 2400 rpm Nwjdpfsx D I Ubjx Ag Ijc Spindle motor power 40 hp Number of axis 2 Tail Stock Pinol tool taper MT5 Media Chip conveyor Yes Additional Equipment Line Filter & Surge Suppressor – 220 VAC, 3-phase, 80 A, 60 Hz Early Power-Failure Detection Module Belt-Type Chip Conveyor This HAAS ST-40 was manufactured in 2018. It features a 15-inch chuck, a maximum part swing of 35.5 inches, and a cutting diameter of 30 inches. The machine includes a 2-speed gearbox spindle, capable of 2,400 rpm, and a 12-station BOT turret. Additional equipment includes a belt-type chip conveyor and a programmable servo tailstock. Consider the opportunity to buy this HAAS ST-40 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Nedpfx Aertrlzog Ijwc Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min Nsdpfx Agsrtryyo Ijwc

Condition: good (used), Year of construction: 2013, Swing over bed 660mm, maximum machining diameter 350mm, maximum machining length 540mm, bar capacity 65mm, spindle speed 5,000rpm, 12 station turret, Njdpfxjyna Nge Ag Ijwc Mazatrol Smart control, swarf conveyor, & 3 jaw chuck.

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS HYDRAULIC STEADY FULL SET OF MANUALS Nodpfx Asymmqbeg Iowc MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Condition: used, Year of construction: 2000, max swing 700 mm, X/Y 255/520 mm, 12-position upper tool turret and 8-position lower tool turret with driven tools, measuring head, tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15 t Nedeym Sx Dspfx Ag Ijwc

Condition: used, Year of construction: 2000, max swing diameter 700mm, X/Y 255/520mm, tailstock, 12-position tool turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12t Nwsdpfxsym Sm Ue Ag Ijc

Condition: used, Year of construction: 2019, max. workpiece diameter 400 mm max. workpiece length 300 mm control FANUC travel -x axis 995 mm travel -z axis 580 mm max. turning speeds 2.850 U/min no. of tools in turret 12 Stk./pcs. driven tools turning speeds 6.000 U/min Vertical Turning Machines | 2 x EMAG VL 8 equipped with driven tools and Track Motion TM loading system Both machines show the following operating hours: - Power-on hours: approx. 16,300 hrs - Spindle hours: approx. 9,950 hrs Nsdpfjynnuwsx Ag Ijwc An extensive package of tools and clamping equipment is included in the scope of delivery. The machines are in very good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL8 | VL-8

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, Nsdpfx Aeyll Txjg Iswc

Condition: used, Brand: GEMINIS Model: CNC 4 PLUS 620 x 2000 Cnc : FAGOR Distance between points : 2000 mm Height of centers : 315 mm Max. turning diameter : 620 mm Swing over saddle diameter : 370 mm Bar passage : 80 mm Precision swivelling turret: 1st speed range: 0 to 355 rpm 2nd speed range :0 to 1800rpm Tailstock : Morse 6 Main motor : 15 kw Nwedpfx Ajwznp Njg Iec Max. Piece weight : 2.560 kg Tailstock quill diameter : 140 mm Machine size (L x Wx H): 4300x 1900 x 1800 mm

Condition: used, Year of construction: 2014, Hardinge GS200 CNC Lathe 2010 Hardinge GS200 CNC slant bed lathe equipped with Fanuc Series Oi-TD control. ----- Control Fanuc Series Oi-TD CNC Control ----- Capacity Chuck Size: 3 Jaw Bar Capacity: 52mm Maximum Swing: 457mm Maximum Cutting Diameter: 284mm Maximum Cutting Length: 406mm Distance Between Centres: Not specified ----- Main Spindle Maximum Spindle Speed: 5,000 RPM ----- Turret Number of Stations: 12 ----- Axis Travels X Axis Travel: 218mm Z Axis Travel: 406mm ----- Nwsdpfxoylchte Ag Ijc Accessories Hydrafeed Multifeed 65 Barfeed Swarf Conveyor Control: Fanuc Spec: Spindle bore 52 mm | Max Swing 457 mm | Travel X 218 Z 406 mm Accessories: Tailstock, parts catcher & 8" Power Chuck, Swarf conveyor, Collet chuck

Condition: used, Year of construction: 2022, turning diameter 276 mm turning length 500 mm control Mazatrol Smooth G max. swing diameter over bed 695 mm Distance spindle end - turret 710 mm bar material dia. max. 65 mm turning speed range - spindle 35 - 5000 U/min max. torque on the spindle 465 Nm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min spindle nose A2-6 spindle passage 76 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW tailstock quill taper MT 5 Travel- tailstock 550 mm Tool turret 1 Numbers of tools 12 (angetrieben) tool taper VDI 30 min rated capacity 42,6 kVA Required air-pressure 0,5 / 330 MPa / l/min distance spindle /table 710 mm total power requirement 37 kW weight of the machine ca. 5,7 t dimensions of the machine ca. 2,8 x 2 x 1,9 m With the following special accessories: - Mayfran chip conveyor, side ejector, hinged belt conveyor - Engraving function ACCESSORIES / MACHINE OPTIONS Automatic on/off switch and warm-up function A warm-up is necessary to avoid problems such as abnormal wear of the sliding surfaces and sluggish movement. A sufficient warm-up provides the machine with the heat resistance it needs to machine workpieces with consistent, high precision. Transformer for the European market 8" chuck for main spindle with enlarged passage USB connection (1 connection) Mazak standard colour Main spindle motor AC 26 kW Tool turret with 12 stations VDI, also for driven tools in every position. For maximum performance, only the cutting tool is driven. Programmable tailstock (MK5) Tailstock quill (MK5) Y-axis control SAFETY DEVICES Operator door with lock switch Double foot switch Opening and closing of the chuck by means of a separate switch. Hydraulic pressure lock Fully enclosed work area Work area lighting COOLANT SUPPLY High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Nsdpfeynbd Ssx Ag Iswc CHUCK, ETC. Automatic opening/closing of chuck jaws 8" power chuck with enlarged passage (main spindle) Kitagawa BB208 MEASURING SYSTEM Automatic Tool Eye NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (shared variables: 600 pairs) Mazak tapping/drilling cycle Tornado in EIA/ISO. (Only possible on machines with Y-axis. EIA/ISO package EIA/ISO input function EIA/ISO additional functions - Helical interpolation - 3D tool correction - Workpiece coordinate rotation - Geometric function - Scaling - External data input/output Thread cutting function (G33) Reverse time feed G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop (optional stop) Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak thread tapping/drilling cycle Tornado in EIA/ISO. EIA/ISO drilling cycles (arc, grid, circle, circular arc, line) Machining on inclined surfaces EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Interface for LAN SD memory card I/F Smooth standard software for lathes (milling) MAZACC 2D software Workpiece shape compensation Rapid traverse paths Rounding function - Seamless co...

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Nedpsynbd Ejfx Ag Iswc Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Nwjdjynk Tispfx Ag Iec Gantry loading system LG-10AI

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Nwsdpfxsynk Tcs Ag Iec Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Nwodpfx Ajynk E Esg Isc Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories Nwsdpfx Aoym T I Tjg Isc * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available. Nsdpfxjyna Uij Ag Iowc

Condition: used, Year of construction: 2012, Lot consists of: (1) CNC vertical grinding + hard turning center Technical Details: max. workpiece internal diameter 10 - 200 x 150 mm, 2 work spindles, 4 machining stations, CNC SIEMENS SINUMERIK 840D, tool turrets, chip conveyor, rapid traverse: X/Z: 90/30 m/min Nwodsym Sazopfx Ag Ioc

Condition: used, Year of construction: 2002, Lot consists of: Nwsdpfx Ajym Rmmsg Isc (1) Vertical Turning Machine Technical Details: Equipped with: - CNC control Siemens 840 D - Tool turret with 12 stations VDI 40 - Driven tool positions at stations 1/4/7/10 - Workpiece conveyor belt - Chip conveyor - No coolant pump (central system) - Turning diameter: 200 mm - Swing diameter: 250 mm - Turning height: 350 mm - Control: Siemens Sinumerik 840 D - Spindle front bearing diameter: 100 mm - Feed range: 0.1 - 20,000 mm/min - Rapid traverse: 20 m/min - Stroke of vertical slide: 300 mm - Spindle nose according to DIN 55026 – size A6 - Main spindle speed: 50 - 6,500 rpm - Tool drive speed range: 0 - 3,000 rpm - Total connected load: 40 kW - Machine weight approx. 8 t - Floor space required approx. 4.5 x 4.0 x 3.5 m The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.