Used V-Tines for sale (35,814)

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: Robot: 922245 / Controller: 94311, overall weight: 1,617 kg, load capacity: 240 kg, arm reach: 2,700 mm, For sale is a used and tested KUKA industrial robot, model VKR 240 R2700, equipped with a (V)KRC2 ed05 controller from 2012. The 6-axis robot was manufactured in 2011 and features a payload capacity of 240 kg and a reach of 2700 mm. The VKR version meets specific industrial standards and is designed for tasks such as material handling, spot welding, and automated manufacturing processes. Serial numbers: robot 922245, controller 94311. Operating hours are unknown. Dkedpjy N Ekgefx Ak Aow

Condition: like new (used), Year of construction: 2005, operating hours: 20,000 h, rotor diameter: 500 mm, rotor length: 2,962 mm, V(V/N)Z300 Dksde Ah Hgaepfx Ak Aow

Year of construction: 2025, condition: used, functionality: fully functional, Stainless steel mixer with a capacity of 150 to 8500 liters or a filling weight of 5000 kg. Mixing screw drive: 11 kW. Swing arm drive: 1.1 kW. The mixer has been overhauled and can be inspected in working condition. Stainless steel pneumatic side discharge. Steel swing arm (can be offered in stainless steel). New stainless steel mixing screw. New stainless steel tank. New stainless steel lid. Dksdpfx Ako Ahxz As Aow Warranty on overhauled parts.

Year of construction: 2006, condition: used, Center height: 1132mm, max. machining diameter: 16mm, max. turning length without reclamping: 200mm, spindle bore: 20mm, main spindle speed: 10,000rpm, main spindle positioning accuracy: 0.001°, main spindle drive power: 2.2kW, max. sub-spindle machining diameter: 16mm, sub-spindle speed: 10,000rpm, sub-spindle positioning accuracy: 0.001°, sub-spindle drive power: 0.75kW, driven tools on vertical tool holder, speed: 8,000rpm, drive power: 0.75kW, number of tools: 4, driven tools on turret, speed: 6,500rpm, drive power: 0.75kW, number of stations: 10, number of tools: 5, clamping sleeve diameter: 19.05mm, turning tool shank cross-section: 10mm, main/sub-spindle collets: F20 (138E), drilling collets: ER 11, rapid traverse speed on all axes: 20m/min, connected load: 6kVA, control system: Mitsubishi Meldas 635, length: 2450mm, width: 1170mm, height: 1700mm, weight: 2.55t, including FMB Minimag 18/3200 C bar feeder, machine is fully functional, no known technical defects. An on-site inspection is possible. Dksde Ahq N Iopfx Ak Asw

Condition: good (used), Year of construction: 2008, Ref. -No.: 10641 Manufacturer: HERMLE Type: C 1200 V Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain TNC 430 Storage location: Halberstadt Country of origin: Germany Machine-No.: 193XXXX X-Travel: 1200 mm Y-Travel: 900 mm Z-Travel: 500 mm Tool Taper: HSK 63 Tool changer: 30 Dsdpfx As Ahmvusk Aokw Spindle Speed: 16000 RPM Weight Of The Machine Ca.: 14 t Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: used, functionality: fully functional, For sale: Motan METRO HES 50 vacuum conveyor for granules, designed for transporting plastic granules, including feeding injection molding machines. The unit is equipped with a stainless steel tank, an integrated suction unit, and an electronic control panel with a digital display. Technical data according to the nameplate: Manufacturer: motan GmbH Model: METRO HES 50 Power supply: 230 V, single-phase, N and PE Frequency: 50/60 Hz Power consumption: 1.1 kW – 1100 W Current draw: 4.8 A Control voltage: 24 V DC / 230 V AC Protection: 10 A, time-delay Country of manufacture: Germany CE marking Condition: used, visible signs of wear. Dedpfj Aibgqsx Ak Ajkw The set includes the unit with the control panel, cables, and connectors as shown in the pictures. The scope of sale corresponds to the pictures.

Condition: excellent (used), Year of construction: 2001, DIOSNA V 250 A Mixer / Granulator for Powders This compact mixing unit with a useful capacity of 235 liters is designed for the intensive mixing and dispersing of powders or granules. It can also be used to process free-flowing materials and liquids. Batch size: min. 50 kg - max. 110 kg (bulk density 0.5 kg/liter) Dodpfxj Ah H Dls Ak Aokw Capacity: 245 liters Speed of mixing tool: 90 and 182 RPM Speed of chopper: 1,425 and 2,890 RPM External compressed air supply required Manufacturer: DIOSNA Year of manufacture: 2001 Space requirements: 230 x 130 x 250 cm

Condition: used, Year of construction: 2008, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2008 Control : Siemens 840D - Powerline Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):27 kW Torque (max.):145 Nm Clampingcylinder:Full-clampingcylinder Workpiececlmaping:3-Jaw chuck, Röhm KFD-HS 200 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):27 kW Torque (max.):145 Nm Clampingcylinder:Full-clampingcylinder Workpiececlmaping:Mandrel, Hainbuch Type 211 Gr. 3 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:6.000 rpm, 9,5 kW, 20 Nm Toolcarrier II: Dkjdpfxs Ahghbj Ak Asw Technology:Toolclampingsurface for toolholder with coolant supply Taper:T-Slots Toolcarrier III: Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:6.000 rpm, 9,5 kW, 20 Nm In general: Movement in X1/Z1:1.160/260 mm Rapid travers in X1/Z1:80/40 m/min Movement in X3/Z3:540/260 mm Rapid travers in X3/Z3:40 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and High-pressure, 20 bar Rawmaterialfeed:Circulation systems for Storage, Schnaithmann Finished partremoval:Workpieceunloading device with conveyor belt, Schmid Extraction:Interface mechanical prepared Further Equipment:Rinsing pistol Further Accessory:Misc. used static and driven Toolholder. mandrels

Year of construction: 2008, condition: used, Receiver capacity 90 l 750 L/min Motor output 4,0 kW Used Machine Year of Manufacture: 2008 Features and Technical Specifications: - Motor Connection: 400 V - Motor Power: 4.0 kW - Tank capacity: 90 L Dodpfez Dkzzex Ak Askw - Suction capacity: 750 L/min - Effective flow rate: 560 L/min - Cylinders: 2 - Speed: 1,450 rpm - Max. pressure: 11 bar - Weight: approx. 103 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Dedj Ad Iz Sjpfx Ak Aekw Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: Robot: 915252 / Controller: 67104, overall weight: 1,501 kg, load capacity: 270 kg, arm reach: 2,700 mm, For sale is a used, tested KUKA industrial robot, type KR 270-2, equipped with a (V)KRC2 ed05 controller. The 6-axis robot was manufactured in 2009 (manipulator and controller) and is designed for heavy-duty industrial applications. With a payload capacity of 270 kg and a reach of 2700 mm, the system is suitable for areas such as handling heavy components, spot welding, and palletizing. Serial numbers are 915252 for the robot and 67104 for the controller. Operating hours are unknown. Dodpfx Aksy N Ehxe Aekw

Condition: used, functionality: fully functional, For sale: KOCH TECHNIK MIKO vacuum conveyor for transporting plastic granules. The device is designed for the automatic feeding of injection molding machines, extruders, and other processing machines. Data from the nameplate: Dksdpfs Aibfzox Ak Ajw * Manufacturer: Werner Koch Maschinentechnik GmbH * Model: MIKO * Serial number: GD1576 * Power supply: 230 V * Date of manufacture: 12-16 * Country of manufacture: Germany Equipment: * Integrated suction unit. * Control panel with digital display and time adjustment. * Transparent tank for observing the material. * Side connection for connecting the transport hose. * Pneumatic solenoid valve. * Lid with snap-on fasteners. * Mounting base. * Power cord with plug. Condition: used, visible signs of wear as shown in the photos.

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Dodpo Admbqsfx Ak Aokw Through-spindle cooling: 12 bar Chip conveyor

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Dkjdps Ahppdefx Ak Asw Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable around the vacuum lifter by loading laser machine continu vacuum protection vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader ( buster type ) include mounting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal. Dksdpfx Akoytcnve Aow price is for 300 kg lifter 600 kg lifter plus 300 euro 800 kg lifter plus 600 euro =>direct from stock. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Dksdpfx Aj Adl Rksk Aow Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Dkjdpfx Ae Ahx N Rok Asw Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: used, machine/vehicle number: 008176, X axis working area: 3050 mm Dsdpfx Aj Ahwxzjk Ajkw Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 25 Total number of tool changer positions: 4

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Dkodspcf Etopfx Ak Aew Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,740 h, power: 6 kW (8.16 HP), operation weight: 921 kg, mast type: telescopic, fuel tank capacity: 123 l, output voltage: 230 V, motor manufacturer: Kohler, Wacker Neuson LTN 6L-V Lighting Mast Wacker Neuson LTN 6L-V Lighting Mast | Lighting Tower | Floodlight Tower | Mobile Floodlight System Dkjdo Agczhepfx Ak Aew – Year of manufacture: 2013 | Approx. 3,740 operating hours | 9 m mast height | 4 x 1,000 W metal halide lamps | 6 kW generator | 360° rotatable Technical data: Manufacturer: Wacker Neuson Model: LTN 6L-V Condition: Used – very well maintained Year of manufacture: 2013 Operating hours: approx. 3,740 h Operating weight: 921 kg Transport weight: 764 kg Mast height: 9 m Generator output: 6 kW Rated voltage: 230 V Frequency: 50 Hz Light unit: 4 x 1,000 W metal halide lamps Illumination area: up to approx. 30,400 m² Engine: Water-cooled 3-cylinder diesel engine Engine manufacturer: Kohler Tank capacity: 123 l Fuel consumption: approx. 1.68 l/h Mast: Hydraulically extendable and 360° rotatable Coupling: Car ball hitch L x W x H (in transport position): 2,998 x 1,265 x 2,305 mm Highlights & Features: - Hydraulically extendable lighting mast up to 9 m height - 360° rotatable light unit - 4 powerful metal halide lamps with 1,000 watts each - Integrated 6 kW generator with 230 V power supply - Water-cooled 3-cylinder diesel engine - Car ball hitch for easy transport - UVV NEW – immediately ready for use - Very well-maintained condition Application areas: ✓ Construction site lighting ✓ Road & civil engineering ✓ Fiber optic & cable construction sites ✓ Night construction sites ✓ Municipal operations ✓ Emergency & disaster protection ✓ Events & event technology ✓ Industry & assembly work Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection & collection possible Delivery: throughout Germany & internationally upon request Pricing: ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale reserved. Prices plus VAT / VAT excluded More lighting masts & power generators available! ➡️ Wacker Neuson lighting masts, generators, construction site lighting & accessories Buy Wacker Neuson lighting mast | LTN 6L-V used | 9 m lighting mast | 4 x 1,000 W metal halide lamps | 6 kW generator | Construction site lighting | Wacker Neuson quality | Lighting tower | Floodlight tower | Light tower | Construction site lighting mast | Lighting mast | Generator lighting mast | Lighting mast trailer | mobile floodlight system Your reliable partner for construction site lighting & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure your immediately available machine! If required, we will gladly arrange a virtual inspection of the machine via video call.

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m Dksdpfx Asy Ty A Sjk Aew coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: Robot: 764020 / Controller: 45730, overall weight: 850 kg, load capacity: 30 kg, arm reach: 2,033 mm, The industrial robot from KUKA is a 6-axis automation system with a payload of 30 kg and a reach of 2033 mm. The robot was manufactured in 08/2006, the controller in 2006, and it has 0 operating hours. The condition is used. The system is equipped with KUKA System Software (KRC2). Typical applications include handling, assembly, and automation tasks. Dkedpfsy N Eldox Ak Asw

Condition: used, Year of construction: 1988, machine/vehicle number: 724306, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 tons Stroke rate: 400 strokes/min Material and feed data Dkodpfxe Aa Nhls Ak Aew Sheet width: 180 mm Strip width: 180 mm Feed length: 150 mm Stroke data Stroke: 10–80 mm Control and electrical system Control: KAISER Voltage: 380 V Dimensions Space requirement: approx. 1.85 × 2.70 × 3.00 m EQUIPMENT Original KAISER strip feed, model ZR 18 D

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Robot: 812358 / Controller: 46122, overall weight: 1,430 kg, load capacity: 150 kg, arm reach: 3,100 mm, For sale is a used KUKA industrial robot, model KR 210 L150 2000, equipped with a (V)KRC2 ed05 controller. The 6-axis robot was manufactured in 2004 (manipulator) and 2007 (controller), offering a payload capacity of 150 kg and an extended reach of 3100 mm in the L version. The system is also configured with "absolute accuracy" measurement, providing increased path accuracy for precision applications. Areas of application include handling, assembly, palletizing, and automated manufacturing processes. Serial numbers are 812358 (robot) and 46122 (controller). Djdpfxoy N Ei As Ak Ajkw

Condition: excellent (used), HOLZ-HER TRIATHLON 1486 V – Industrial Edge Banding Machine Dkodpfxo Ahlyre Ak Aow For sale: a professional, industrial single-sided edge banding machine from the German company HOLZ-HER, model TRIATHLON 1486 V. Identification data: Manufacturer: HOLZ-HER Model: TRIATHLON 1486 V Year of manufacture: 2003 Identification number: 172-0312 Machine number: M 109 Type: industrial single-sided edge banding machine Equipment and machining capabilities: pre-milling unit, gluing station, edge trimming units, cutoff saws, corner rounding unit, profile sanding unit, oscillating unit, polishing brushes, programmable control with operator panel. The machine is designed for industrial edge banding of furniture panels and carpentry elements. Technical condition: The machine is in good working order. It can be inspected before purchase.