Used Vacuum Belt Filter for sale (18,553)

Condition: good (used), Busch Vacuum Pump Type: 400-212 Lhodpfx Ajwa Ucgencjl 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: good (used), Busch Vacuum Pump Lhjdpowa Unpofx Ancel Model 400-212

Condition: excellent (used), Year of construction: 2017, Koch Technik safety (protective) filter type SA3. Its main tasks are: -Vacuum pump protection: Protects blowers and suction pumps against the ingress of fine dust, plastic residues or impurities that could lead to engine failure or seizure Lsdpfozkutdjx Ancjhl -Material dust removal: Filters return air from feeders and material separators, ensuring the cleanliness of the entire pneumatic system. These devices are usually installed in transfer lines before the vacuum generator (pump), most often in granulate dryers (e.g. CKT series) or central raw material feeding systems for injection molding machines and extruders. 4 pieces available - years 2008, 2008, 2010 and 2017 Sold complete with 4 Koch pumps and controls

Condition: used, Year of construction: 2007, Used deburring machine FLADDER AUT-1000 VAC incl. vacuum pump and filter system Technical data: Year of manufacture: 2007 Manufacturer: FLADDER Model: AUT-1000 VAC incl. vacuum pump and filter system Currently equipped with: - new brush set - complete maintenance incl. replacement of all oils - vacuum pump inspected and serviced Ljdpjzy Uvksfx Ancjhl The machine is powered and can be inspected by appointment! Working width: 1000 mm Long infeed and outfeed Fully functional with extraction system Belt and vacuum table were replaced 3 years ago The machine has only been used for less than one shift No known defects Connections: 3x 400V / 50Hz / 50 A

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Ultimate pressure: approx. 200 mbar (abs.) Accessories: Intake filter; Operating instructions Delivery time: Short term Lsdpfx Ansv I Agdjcshl

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ Internal number: #550 Mercedes-Benz Arocs 6x2 L with combined high-pressure flushing and suction pressure tank body with water recovery, KROLL Type K 1.0-13.0/29 P Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach on pivot side 5,200 mm * Tank material S355J2+N (St. 52.3) * Water recovery unit * Sliding piston with 3 locking positions * (3,300 l water / 10,600 l sludge, 5,500 l water / 8,200 l sludge, 7,700 l water / 6,000 l sludge) * Suction from open water sources possible - "comfort version" via cassette boom with integrated filter * DISCHARGE: by pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for backflowing dirty water over the boom into the sewer * Manhole DN500 Chassis Mercedes-Benz Arocs * 2548 L 6x4 * Powershift 3 * 476 HP / 350 kW * EURO 6e * Fuel capacity 510 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on cab * Rearview camera * Navigation system * Air conditioning Vacuum system * Samson Truck Master 2,500 ca. 2,465 m³/h at 400 bar * Drive: elastic, via drive shafts, V-belts and pneumatically actuated friction clutch from the vehicle engine PTO * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach on pivot side 5,200 mm * Additional suction hose reel with suction on rear right with approx. 30 m DN80 suction hose High-pressure system * Uraca P 3-45 approx. 345 l/min at 205 bar * Drive: elastic, via drive shafts, V-belts and pneumatically actuated friction clutch * Approx. 240 m HD hose DN 25 * Large HD hose reel for 240 m, 1” DN 25, swiveling 180° * Equipped with 240 m DN25 * Small HD hose reel for 80 m DN 13, hydraulically operated * Equipped with 60 m DN13 Features * Hose storage cassette with telescopic boom DN 125 * Stepless height adjustment of suction hose, hydraulically via roller guide trolley * Boom arm for suction hose hydraulically operated, telescopic, and swivels 180° Ljdpfx Anjyawvzscehl * KROLL water recovery system WRS1 with self-cleaning function * Pressure-speed control * Spray gun * LED beacons * LED perimeter lighting * Remote control of working functions via CAN-BUS technology * CAN wireless remote control * Hand-wash unit (hot water) * Rearview camera with 7” color monitor incl. day/night switch * Acoustic enclosure in pump area * WATER SHORTAGE WARNING SYSTEM: with buzzer in main control cabinet and automatic pump cut-off * RESIDUAL WATER DRAINAGE: pneumatically operated for all water-carrying components, with connection to truck compressed air system * Large equipment box and hose trays * Toolbox * Holder for traffic cones * Vice * Ladder * Electric cable winch * Mount for fall protection device * Pulley for banana/guide device * Large advertising boards right and left * Manhole DN500 Technical data GVW 26,000 kg * Unladen weight approx. 20,700 kg * Length 9,800 mm * Height 3,890 mm * Width 2,550 mm * Wheelbase 4,200 mm For further details and/or pictures, please contact us directly. A wide selection of further vehicles for PURCHASE or RENT can be found at: Modifications, prior sale, and errors excepted. The buyer is obliged to independently ascertain the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under Au...

Condition: like new (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SYSTEM ATBF170, The burger forming machine (for burger products with a diameter of 38 - 170 mm and a height of 7 - 30 mm) including the UNIVERSAL CONVEYOR BELT UTV-200/1500 was newly purchased in 2021 as a backup for an identical machine already in use. It was only set up and then operated for just one day. Therefore, the machine is practically new and ideally suited for producing patties, oval, round, or square-shaped nuggets. The forming machine is fed by a vacuum filler, which is not included in the price. The machine is currently set to a capacity of 3,000 patties in an 8-hour shift. It can most likely handle even more. - Pneumatic operation - Ejection plate with water spray system - Synchronous control, 24 V connection - Compressed air: 10 m³/h, 6 bar - Portioning output: approx. 100 portions/min. (product-dependent) - Includes 1 base frame - Without forming insert - Without ejector Lsdszhnwdjpfx Ancshl - Ejection: one-way UNIVERSAL CONVEYOR BELT UTV-200/1500: with additional adapter Connection voltage: 1 x 230 V AC Connection power: 0.5 kW Rated connection frequency: 50 Hz Length: 1500 mm Width: 200 mm

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4656, grinding length: 4,100 mm, grinding width: 200 mm, Reform AR41 Type 7 C4656/91 Year of manufacture: 1991 Grinding length: 4100mm Lodpfx Anotqtppecjhl Grinding width: 200mm Workpiece height: 190mm Table clamping area: 4169x202mm Segment head diameter: 250mm Spindle diameter in the front. Bearing: 45mm Swivelling: 2° Max. torque: 2x45.8Nm 2x grinding motor 7.5kW Feed: 2000-35000 mm/min Max. speed: 1460 min/-1 Total power requirement: 30 kW Heidenhain digital display Additional grinding device ZS 7.5kW Swivelling clamping table via swivel gear Paper belt filter cleaning including pumps Central lubrication system Machine weight approx. 8.2t Space requirement approx. 9.5x2.6x2m

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Lhjdpex Dm Tvjfx Ancsl Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Ljdpsxwcwwsfx Ancjhl Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: refurbished (used), Technical specifications: Product number RA 0250 D 5ZI Engine power 5.5 kW Capacity 250 m3/h Max. vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [h x l x w] 1011 x 581 x 410 mm Lhjdpfxozvrmfe Ancsl The pump achieves a vacuum of 0.5 mbar, as confirmed by the recorded video. The unit has undergone a major overhaul. The pump is in very good condition, with new filters, oils, separators, etc. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, kinetic, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with such a pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: used, Year of construction: 2007, Wide-belt sanding machine Lodpfozuza Ssx Ancjhl Manufacturer: Kündig Type: Premium-2 1100-RE Year of manufacture: 2007 Technical data: Working width: 1100 mm Working height (max.): 200 mm Sanding roller Sanding shoe for finish sanding Belt cleaning Vacuum 400 V, 50 Hz, 24 VDC 57.5 amps 28.4 kW Includes loading Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Ljdpfoz Abkysx Ancshl

Condition: refurbished (used), Vacuum pump unit, manufacturer Leybold, consisting of: - 01 rotary vane vacuum pump, type Trivac D65 B - 01 roots blower, type WAU 251 The fully overhauled vacuum pumps are available for delivery approximately 4-6 weeks after ordering and are ready for immediate use. We recommend installation only by trained personnel. Adaptation materials available on request. Oil filling: LVO 100 Technical data Trivac D65 B: Including roots pump adapter Pumping speed: 65 m³/h (50 Hz) / 75 m³/h (60 Hz) Sound level according to DIN 45 635, without / with gas ballast: 57 / 59 dB(A) Dimensions (LxWxH): 794 x 234 x 317 mm Oil filling min/max: 2.0 / 3.3 l Ultimate pressure: 5x10-3 / 2x10-3 mbar Double oil filter and oil mist separator available optionally on request Automatic oil return available optionally on request Technical data WAU 251: Pumping speed: 253 m³/h (50 Hz) / 606 m³/h (60 Hz) Sound level according to DIN 45 635: 64 dB Lhjdpevyzkrsfx Ancol Dimensions (LxWxH): 752 x 390 x 320 mm Oil filling: 1.6 l Ultimate pressure: 2x10-4 / 8x10-4 mbar Subject to prior sale! This offer is valid only for customers within Germany and other European countries!

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, total width: 2,000 mm, total height: 2,020 mm, total length: 3,800 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,400 kg, working height: 900 mm, height adjustment type: electric, input voltage: 400 V, warranty duration: 3 months, passage width: 1,350 mm, sheet thickness (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness brass (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness steel (max.): 100 mm, Equipment: 1 contact roller unit, Ø 210 mm, rubberized 40 Shore, grooved Drive: 15 kW/87 Hz/29 A (11/19 kW motor) with frequency control / ECO-Drive, constant speed, with electric roller adjustment (SKF) and positioning prepared for the use of Scotch-Brite strips 1 sanding brush station with 3 vertical rotating units equipped with 2 horizontal rotating brushes each Tool: grit 150, No. 068087 Drive: 2.6 kW per unit Speed of the rotating units: 30-150 rpm, frequency-controlled. Cutting speed of the brushes: 5-20 m/sec, frequency-controlled. With electric height adjustment and positioning Installed options: Automatic workpiece thickness adjustment (AWDM), automatic tool length correction, machine interior lighting (LED version), stepless feed rate 0.5-10 m/min, conveyor belt cleaning brush, conveyor belt control, conveyor table in vacuum version, vacuum control with vacuum sensor Touch screen: 9" Siemens TP900 Comfort Year of manufacture: 2017 Weight [kg]: 3400 kg Ledpfx Anszav Dqocohl Previous owner: 1 Availability: Short-term, by arrangement Optionally, the matching piping and extraction system (total CE) are available for the machine.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width 910 mm upper combination unit lower combination unit two feed speeds Lhedpezxqa Nefx Ancol belt oscillation electronic material thickness setting material thickness gauge Table with vacuum pump on the second unit Year of manufacture: 2009 New conveyor belts installed in 2023

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Storage location: Nattheim Lhodjvvki Nopfx Ancel

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, overall weight: 1,200 kg, volume flow: 1,000 m³/h, final pressure: 4 bar, Technical data: Product number RA 1000 B Year of manufacture 2004 Motor power 22 kW Capacity 1000 m3/h Max. vacuum 4 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 1200 kg Dimensions [H x L x W] 1611 x 981 x 1310 mm The pump achieves a vacuum of 4 mbar as confirmed by the sensor measurement in the video attached below. After service New oil New oil filter New exhaust separators Oil rotary vane vacuum pump, suction device – a device used in technology for the removal of gases (creation of vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: Ultimate pressure (the lowest pressure that can be achieved with this pump), Pumping speed and dependence of this speed on pressure, Lhsdpfx Asyc Ht Isncel Capacity (usually measured in m3 of pumped gas per unit time).

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Lodpfx Anjw Ivqgecshl Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: used, 11375, WSU 501 H, Ruvac Oerlikon Leybold Vacuum GmbH Roots vacuum pump Model: 11375 Type: WSU 501 H Condition: Used Lhedpfxsq S Tk Ho Ancol

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 2,000 kg, SCM Sandya 7S wide belt sanding machine Working width: 1100 mm Sanding height: 4–160 mm 1 metal sanding head, 11 kW 2 combi sanding heads, 11 kW Ljdpszykr Uofx Ancjhl Adjustable speed of the combi sanding head via frequency inverter Electric height adjustment Optical oscillation Adjustable feed speed via variator: 3–17 m/min Vacuum pump Technical documentation and CE certificate Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. Ledpfx Aex Aqa Dencehl DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum.

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data Lhjdpfx Aezzz Naencel - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: excellent (used), Year of construction: 1988, utomatic wide belt sander with 2 belts for varnish, wood, veneer, composite materials and various materials Technical data: Working width mm 1350 Max useful height mm 130 Belt size mm 2450 x 1350 Composition: 1° Group: Sanding roller diameter mm 320 - sh. 60 - Blowers cleaning belts - Motor Kw 11 with speed variator 2° Group: Sanding roller diameter mm 320 - sh. 40 - Blowers cleaning belts - Motor Kw 11 with speed variator Scotch brite - Motor Kw 1,5 Vacuum table - Motor Kw 5,5 Feed belt speed variator 4/19 mt/min Ljdpfx Aogmbu Ijncjhl Operating pressure 7 Bar equipped with Abrasive belts series Overall dimensions: machine mm 2000 x 2700 x 2500 vacuum pump mm 800 x 700 x 900 h

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed Lhedsvdtxispfx Ancol - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts