Belt and profile sanding machine

Löser

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm Lrsdpfewvt I Hox Akqek 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg

Year of construction: 1999, condition: ready for operation (used), Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible. Lredpfoyypl Njx Akqjk

Condition: reconditioned (used), functionality: fully functional, Löser RP+S374-1, centerless tube grinding machine, cylindrical grinding machine, wet grinding, wet machining Belt grinding station: one Ljdjyxdgljpfx Akqjrk Grinding belt: 150 x 2500 mm Contact wheel: 150 x 400 mm Belt tension: pneumatic Wheel drive: 5.5 kW Part feed: 0 - 8 m/min Part diameter: 10 - 100 mm Part length: 60 - .....mm Working direction: from right to left

Condition: ready for operation (used), Centerless tube grinder – belt grinder – centerless tube grinder – cylindrical grinder Lredpsxmiltjfx Akqjk Centerless grinding/polishing machine for tubes for workpieces with a minimum length of 1,100 mm. The machine can be used for both wet grinding and polishing. The machine can process tubes with a diameter from 10 mm to 160 mm.

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min Lodpfx Aeyw Tkkokqjrk power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm bed length ca. 8000 mm voltage 380 V / 50 Hz motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Condition: ready for operation (used), Contact Belt Grinder LÖSER KS 360 for grinding pipes / round material - Abrasive belt length: 2500 mm - Abrasive belt width: 5 - 75 mm - Material grinding length: endless - Grinding range / diameter: 3 - 70 mm - Belt speed: 7.5 - 34 m/s - Contact wheel diameter: 100 - 225 mm - Motor power: 1.6 / 2.6 kW Lrsdpfxoywy Ddo Akqok Dimensions (LxWxH): 1.2 x 0.6 x 1.8 meters / Weight: 350 kg Subject to errors and omissions.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. Lrsdpfx Akjtmqi Deqek The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Lrsdpopugwiofx Akqok Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Year of construction: 2005, condition: ready for operation (used), A centerless round and polishing belt grinding machine Loeser (RPS 376/2+2), retrofitted in 2024, is available. Stations grinding/polishing: 2/2, grinding range: 10mm-120mm, belt dimensions X/Y: 3000mm/200mm, feed rate: 15m/min, machine dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Ljdpfx Akexhnr Ioqork

Year of construction: 2016, condition: ready for operation (used), A centerless round polishing machine Loeser is available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine system with infeed and outfeed table: 1000mm/1000mm. Including magazines as well as infeed and outfeed table. Documentation available. An on-site inspection is possible. Ljdpjvzbg Ajfx Akqsrk