Used Vacuum Table for sale (19,276)

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. Fgsdpfx Aov S Synspwof As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, shaping, form veneering, edge banding, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks of 200 liters each, ensuring comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which switches off the pump when the target negative pressure is reached, preventing continuous operation. Movable on four swivel casters, lockable. Frame can be easily folded up and is locked with two bolts. Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. Fsdpfx Aey Hl Hpopwjgf CE marking Original paint, some areas have been retouched. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Fgodpfezqyxxjx Apwef Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 1996, Sledge length: 2800 mm Cutting width at the rip fence: 1050 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 145 mm Scoring saw: no Fgsdpfxezqyx Ej Apwsf Saw blade height adjustment: manual / hydraulic Saw blade swivel adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: Digital Cutting height display: - Rip fence display: Scale Crosscut fence display: Scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) Fedpfozpwlmsx Apwogf - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 1998, condition: used, machine/vehicle number: 12074, Standard equipment. Fsdpfxjbriwrj Apwjgf

Condition: used, Year of construction: 2016, total length: 1,200 mm, total width: 800 mm, total height: 1,400 mm, Empty weight: 150 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: C34567 - Transport dimensions: 1200mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 150kg - Transport packages [pcs.]: 1 Financial information Fedpfx Aswgxh Hopwogf VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, total length: 1,040 mm, total width: 550 mm, total height: 450 mm, - Documentation available: No - CE certificate present: No - Transport dimensions: 1040mm x 550mm x 450mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fgjdpsxm Rgxofx Apwsf Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, machine/vehicle number: 005583, X axis working area: 3680 mm Y axis working area: 2040 mm Working Table: Flat table Fgedpfotwgirox Apwsf Main Electrospindle power: 13 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Fjdpfskw H Ekex Apwogf Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: good (used), Year of construction: 2006, Mobile welding table / perforated table, Junker&Partner – used: Price ex works: €950.00 (net)! Manufacturer: Junker&Partner Fgedpozp Rxgofx Apwjf Type: Sample assembly for trade fair Year of manufacture: 2006 Drawing: 1000-000-00 Dimensions: approx. 150x90x90 cm Mobile Condition: good Available: immediately Location: Leipzig

Condition: used, machine/vehicle number: 008497, X axis working area: 3140 mm Fgjdpjzruy Hsfx Apwef Y axis working area: 1560 mm Working Table: Flat table Number of controlled axes: 3 axes Total number of tool changer positions: 16

Condition: excellent (used), lifting height: 1,050 mm, load capacity: 500 kg, total length: 1,350 mm, working height: 1,050 mm, operating pressure: 200 bar, power: 0.75 kW (1.02 HP), lifting time: 8 s, Scissor lift table, WTT Fördertechnik, Series E 05.08.5.1.0.RB, Equipped with non-driven support rollers made of precision steel tubing, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Fgsdpfx Ajv Acn Rjpwef Roller track length: 1350 mm Installation length of the support rollers (width): 550 mm Platform width: 600 mm Roller track height in the transfer area: 280 mm Load capacity: 500 kg Useful lifting height: 1050 mm Lifting time: approx. 8 sec. Foot protection contact strips Hand-held push button Overload protection: installed via a cable pull brake on the roller track frame. Integrated hydraulic unit: 0.75 kW, 200 bar Operating voltage: 400 V, 50 Hz (Subject to changes and errors in the technical data, as well as prior sale)

Condition: excellent (used), lifting height: 1,350 mm, load capacity: 1,000 kg, total length: 2,500 mm, total width: 600 mm, working height: 1,350 mm, roll diameter: 50 mm, power: 1.1 kW (1.50 HP), lifting time: 15 s, construction width: 600 mm, roll spacing: 150 mm, roll width: 550 mm, segment length: 2,500 mm, Scissor lift table, WTT Fördertechnik, Series E 10.10.5.1.0.RB, Roller conveyor length: 2500 mm Platform width: 600 mm (rollers 550 mm) Load capacity: max. 1000 kg Useful lift: max. 1350 mm Total: 7 units Sold individually Fodpfx Apjv Acnkowjgf Equipped with non-driven support rollers made of precision steel tube, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Installation length of the support rollers (width): 550 mm Roller conveyor height in the transfer area: 280 mm Lifting time: approx. 15 sec. Foot protection contact strips Hand-held switch on a 3 m long cable Automatic stacking protection - by slightly lifting the platform, the support rollers are automatically braked. Foldable inspection supports Built-in hydraulic unit: 1.1 kW, 200 bar Operating voltage: 400 V, 50 Hz (Subject to changes and errors in the technical data, as well as prior sale)

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm Fgjdpfx Apszt Ai Eowjf the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, mileage: 32,189 km, power: 170 kW (231.14 HP), first registration: 07/2001, fuel type: diesel, empty load weight: 16,730 kg, maximum load weight: 2,770 kg, overall weight: 19,500 kg, tire size: 12R22,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: orange, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: other, number of seats: 2, total length: 9,700 mm, Year of construction: 2001, operating hours: 1,492 h, construction height: 3,470 mm, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, The Mercedes-Benz Atego ZW with the special KROLL 950.50 ZW two-way track cleaning equipment is a used two-way suction and pressure vehicle. This vehicle was first registered on July 25, 2001 and has a mileage of 32,189 km. Powered by a 6,374 cc diesel engine with an output of 170 kW (231 hp), it meets the Euro 3 emissions class. It has a manual transmission with six gears and offers space for two people. The vehicle is equipped with a rail driving device that allows it to drive on tracks at a speed of up to 30 km/h. The body contains suction nozzles for picking up objects from the track bed and a dirt collection container with a volume of approx. 8.5 m². Other features include a pneumatic rake device, a dry filter system and a comprehensive fire monitoring and extinguishing system. The operating time is 1,492 hours. The robust Atego is painted orange and has dimensions of 9,700 mm long, 2,300 mm wide and 3,470 mm high. The total weight is 19,500 kg. With additional safety and control systems such as a sand spreading system, video surveillance and a hand hydraulic pump, this truck is particularly suitable for demanding rail cleaning tasks. Vehicle covered in stickers over a large area. TWO-WAY TRACK VACUUM CLEANER. Self-propelled work machine. ACCESSORIES: 2-axle (4x4) SA rail travel device for rear-axle driven trucks, can be changed to 1,000 mm I 1,435 mm. Rail travel speed 30 km/h Track cleaning structure: suction nozzles for picking up objects of various sizes and weights, from cigarette butts to champagne bottles. The objects are picked up without removing ballast from the track bed. - Dirt collection container (approx. 8.5 m²) - Rake for loosening stuck-on dirt (pneumatic) - Hand suction hose device Fjdpfx Apor Uzllewegf - Dry filter system - Fan - Fire monitoring and extinguishing system (dirt container) EQUIPMENT: All control elements of the rail travel device in the driver's cab - Position control of the rail chassis - Lighting of the rail chassis - Hand hydraulic pump - Earthing device - Earthing cable and rail clamp - 4-way sand spreading system - Signal light and warning system (DB + BOStrab, bell, compressed air horn M 75l660 UIC) - 4-way work lights - Coupling device - Video surveillance system "ORLACO", Sale only to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: excellent (used), Volume flow 3000 Pressure 3400 Pa Filter 30 m2 Spindle speeds 2850 Fedpfeilug Sjx Apwsgf

Condition: good (used), mileage: 352,000 km, power: 194 kW (263.77 HP), first registration: 07/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: orange, suspension: steel, total length: 7,100 mm, total width: 2,500 mm, total height: 3,350 mm, loading space volume: 8 m³, Year of construction: 1998, Equipment: differential lock, power assisted steering, = Additional options and accessories = - Leaf spring suspension - Differential lock Fjdpfx Apeztdm Ejwogf - Air horn - Sun visor - Power take-off (PTO) - Central lubrication system = Further information = Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 50%; Tire tread depth right: 50% Rear axle: Dual tires; Differential lock; Tire tread depth left (inside): 30%; Tire tread depth left (outside): 30%; Tire tread depth right (inside): 30%; Tire tread depth right (outside): 30%; Reduction gear: External planetary axles Number of cylinders: 6 GVWR: 18,000 kg Technical condition: good Optical condition: good

Year of construction: 2006, condition: used, Built in 2006 Fgjdjdanl Hepfx Apwsf Speed bundles/min 40 Pakete/min Size packaged good width max 340 mm min 150 mm Size packaged good: height max 480 mm min 10 mm Size packaged good: length max 500 mm min 150 mm Size packaged good: diagonal max 600 mm Package weight: max 25 kg Electric supply: 400/50 V/Hz Speed: max ca. 24-55 m/min Weight: 150 kg (approx.)

Year of construction: 2000, condition: ready for operation (used), Labeling transfer table Built in 2000 Fgjdpfx Apod N Ehyewsf

Condition: ready for operation (used), Scharmann - WB 80 / Heidenhain digital display ND 780 -Travel ranges X/Y/Z 1300x1200x1200mm Fsdpfx Apsztyi Nswogf -Heidenhain digital display -Rotary table - 1200x1200mm -Table load max. 5 tons -Spindle mount MK5 -Automatic feeds 0.053-6.35mm -Rapid traverses -Spindle speeds 24-2880 rpm -Coolant system -Various accessories / tool holders etc. Errors and omissions excepted.

Condition: used, Year of construction: 2013, length / mm width / mm Fgedpfxjzn Aiuj Apwof height / mm Becker Vacuum Clamping System U 3.6 S-09 – 230 V – Year 2013 – Complete with Vacuum Pump, Vacuum Tank & Vacuum Table For sale is a complete Becker vacuum clamping system consisting of a Becker vacuum pump, model U 3.6 S-09, a vacuum tank (reservoir), a vacuum clamping table, and the mounting accessories shown in the photos. The system was previously used in an industrial environment and is ideal for CNC routers, machining centers, woodworking, plastics processing, fixture holding, and other vacuum clamping applications. Technical Specifications Manufacturer: Becker Model: U 3.6 S-09 Year of Manufacture: 2013 Power Supply: 230 V, Single Phase Motor Power: 0.30 kW (50 Hz) / 0.36 kW (60 Hz) Speed: 1380 / 1650 rpm Inlet Capacity: 6.4 / 7.4 m³/h Maximum Vacuum: 10 mbar Protection Class: IP54 Scope of Delivery Becker vacuum pump U 3.6 S-09 Vacuum tank / reservoir Vacuum clamping table Clamping rails Mounting and clamping accessories (as shown in the photos) Condition The vacuum clamping system is in good used condition with normal signs of wear consistent with industrial use. It was removed from a fully operational machine. The sale includes everything shown in the photographs. Inspection is welcome by appointment. Shipping or collection can be arranged by mutual agreement. Plate size: 440 x 280 x 50 mm

Condition: used, Year of construction: 1990, functionality: fully functional, Altendorf sliding table circular saw F 45, 320 cm sliding table, with Duplex double-sided miter fence. Year of manufacture: 1990 5.5 kW motor with brake Scoring saw Hydraulic saw blade adjustment with foot pedal Saw blade diameter max. 450 mm Cutting height 150 mm Cutting width 1250 mm Fodpjztz Iaefx Apwsgf Dust extraction connection 120 and 80 mm Dimensions 330 x 200 cm Weight 1000 kg

Condition: used, Edwards Maglev turbomolecular pump, model STP XA4503C (serial number moz9430) + SCU1500 Controller. Fully tested. Fgodpoztblxjfx Apwef

Condition: used, Edwards Maglev turbomolecular pump STP XA4503C (moz8950) + SCU1500 Controller. Fully tested. Fgjdpfx Apeztbhtjwef