Used Vacuum Tubes for sale (5,401)

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 Nwodpfszgci Sjx Aireh IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Leybold Two-Stage Rotary Vane Vacuum Pump Here, we offer a Leybold two-stage rotary vane vacuum pump. The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves for sealing, lubrication, and cooling. The pump housing is composed of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed down to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, forced-lubricated plain bearings Minimal air intake High leak tightness (4He-capable) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Discharge side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 db(A) with gas ballast: 59 db(A) Power connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection type: IP 55 Nedpfszgbvqex Airswh Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Type: Trivac D 40 B Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a Busch dry scroll vacuum pump. Nwodpfx Aiozgbvderoh Busch dry scroll vacuum pump Type: FO 0030 B 0110..ZZ Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here, we are offering a vacuum pump for sale. Weight: 125 kg Oerlikon Leybold SCROLLVAC SC 60 D Suction capacity (50 Hz): 60 m³/h Suction capacity (60 Hz): 72 m³/h Oil-free High effective pumping capacity Low ultimate pressure Low-vibration operation Type: SC60D Condition: used Scope of delivery: (See image) Nwedpfx Aszgbu Tsireh (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Nwsdjzgbq Ispfx Airsh Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Nwjdezgbqzspfx Airjh Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump Nwedpfjy Tkivjx Aireh -Manufacturer: Busch, rotary vane vacuum pump -Type: RC 0025 E 501 -Drive: 0.75 kW / 1410 rpm -Vacuum: 20 mbar -Dimensions: 560/440/H340 mm -Weight: 37.5 kg

Condition: ready for operation (used), RINGLER Industrial vacuum cleaner Type: AT-D 4.0 kW Device no.: 96231 Year of manufacture: 1989 Equipment: Nwsdpfx Aijxc Eq Rerjh - Suction hose, new - Chassis - Documentation

Condition: used, Year of construction: 1994, Technical Specifications: - Manufacturer: IST - Year of manufacture: 1994 - Working width: 1300 mm - With 3D mirrors - Number of tubes (viewed from above): 1 - Tube positioned at an angle - Electrode spacing 1620 mm - Suitable for drying edges - Suitable for mercury and gallium tubes. Nsdpfx Aiozf N Tnjrswh - Tube power 80 W/cm - For mounting on an existing conveyor - Location: in storage - Volts, Hz 400 / 50 - Good condition

Year of construction: 2026, condition: used, NEW, built in 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum board, cement fiber board, and planks. Examples: Doors, planks, MDF panels, cabinet fronts, gypsum board, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed andwith a set loading and unloading capacity. This allows you to easily automateyour loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel. Technical Specifications: - Manufacturer: Ka-Ma - Model: KR-1300-1 - Working width: 1,300 mm - Includes belt conveyor, length 3,000 mm - Working height: 930 ± 50 mm - PLC control, operated via a touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel Njdpfxjy S S Hte Airowh - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous operation 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor belt speed: continuously variable up to max. 10 m/min. - Electric motor power: 1.5 kW- Electronic components: Schneider Electronics and Siemens - Weight: 1,200 kg Optional: 2-circuit vacuum system with 4 additional suction cups and the ability to lift the panels 15 mm on one side before vertical movement; required for all materials that can be vacuum-sealed. YouTube link:?v=WpRUnvPFqN0

Year of construction: 2026, condition: used, NEW Automatic loading and unloading table for wood, MDF, solid wood, drywall, cement fiberboard, and boards. Examples: Doors, boards, MDF panels, cabinet fronts, drywall, and facade panels. Adaptations to other products are possible. The machine operates at a constant speed and with a set loading and unloading capacity. This allows you to easily automate your loading and unloading processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens control panel Technical specifications: - Working width 1.300 mm. - Includes belt conveyor, length 3,400 mm - Working height 930 ± 20 mm - PLC control, operated via a touch panel, Siemens S7-1200 - 2-circuit vacuum system - Loading and unloading of parts via vacuum suction cups - Special suction cups with position adjustment - 4 additional suction cups to lift the panels 15 mm on one side before vertical movement. - Automatic signal upon completion of the loading process - Max. horizontal speed: 0.5 m/s - Horizontal working stroke: 1,300 mm - Max. vertical speed: 0.5 m/s - Stack height approx. 1,000 mm (including pallet under the plate stack) - Loading side on the left in the direction of travel - Vertical working stroke: approx. 1,200 mm - Max. lifting capacity: approx. 100 kg, continuous operation 85 kg - Max. component width: 1,300 mm - Max. component length: approx. 3,050 mm - Max. conveyor belt speed: infinitely variable up to max. 10 m/min. - Electric motor power: 1.5 kW - Electronic components: Schneider Electronics and Siemens - Weight: 1,500 kg YouTube link: Njdpfxey Iv N Rs Airjwh

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min Nwedpfx Aiszf N Hbjrjh - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%

Condition: used, Year of construction: 1997, machine/vehicle number: 4406, 3D UV dryer Superfici Elmag 2 tubes - 3D UV-dryer Superfici & conveyer Nsdpfezf N Edsx Airjwh - the pictures show the machine before overhaul - Producer Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: good (used), Year of construction: 2014, Ringler Vacuum Unit Type RI 030 W1E Chip vacuum, water vacuum, coolant vacuum with tilting function Technical data Order No. 9.985-924.0 EAN code 4054278018362 Voltage Ph / V / Hz 1 / 230 / 50 Nwedpfxeyz Ddvo Airoh Power consumption during operation kW 1.3 Airflow rate l/s / m³/h 60 / 215 Vacuum mbar / kPa 230 / 23 Container capacity l 71 Filter area m² 0.25 Sound pressure level dB(A) 71 Cable length m 6 Weight kg 39 Dimensions (L × W × H) mm 766 × 571 × 1095

Condition: new, new ! twin shaft paddle mixer Nwodpfx Aszfg D Rjireh all stainless steel variable speed microcontroller 13,2 kW Max. loading volume: ± 500L 2 mixing directions inspection gantry safety lid Easy clean CE-approved with vacuum pump Büsch 6,2 kW + Loader for eurobins

Condition: used, Available quantity: 3 units “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: PIAB Type: piCOMPACT 23 SMART – PC.F.422.S.AAA.F1P1.2X.P1.EN.ACAB Njdpjzggy Iofx Airjwh Technology: Compact/stackable COAX® vacuum ejector with smart functionality (control, blow-off valve, energy-saving mode)

Condition: used, twin shaft paddle mixer suitable for vacuum useful loading volume : ± 2.600L 2 discharge guards with new control box Njdpfxjzfgc Tj Airowh power ± 30 kW dimensions : ± 2.650 x 2.300 x 2.400 mm

Condition: used, Used crane runway system with vacuum handling Year of manufacture: 2017 Load capacity: 250 kg (at lifting device) Crane runway: 6 m Bridge: 6 m Vacuum lifter B 3 UW H K 250 V with 2 oval suction plates 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar, filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely adjustable Operation via special handle on the vacuum lifter. Lifting movement is infinitely variable by frequency converter Nsdpfxszc Agdo Airewh Availability: by arrangement Storage location: Hesse

Condition: new, Year of construction: 2023, Vaccum Mobile User video: Consisting of a movable table with 4 vaccum pads, a hand pad, extendable shelf for hand tools Makita vacuum pump incl. charger, battery and hydraulic oil The Vac Up Mobil offers storage space for a vacuum cleaner and is height-adjustable up to 80 mm Lifting capacity approx. 70 kg L x W x H 705 x 670 x 950 mm Weight approx. 40 kg Availability: short term Storage location: Hochheim Nodpfxsnvkhle Airswh

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is powder-coated in RAL 7012 and RAL 7035 color shades. Custom colors are available upon request and must be clarified in advance, which may result in additional charges. Welded table construction designed for professional use, mounted on a swiveling chassis cart, standing on 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be swiveled for space-saving storage and locked in place, reducing the required depth to only 800 mm. The table surface consists of a 22 mm thick HPL-MDF board, with a slotted vacuum distribution plate made from MDF covering the pressing area. The membrane frame is supported by 2 gas pressure springs mounted on the sides of the machine. A natural rubber membrane with 2 mm thickness, 780% elongation capability, and temperature resistance up to 70°C is installed, attached by a clamping system for efficient membrane changes. The all-around sealing of the press area is provided by a sealing profile installed in the membrane frame. Oil-circulated vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks with a total capacity of 200 liters. Evacuation and ventilation of the press area is managed via a 3-way ball valve located at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, it is possible to book initial setup and a quick instruction by one of our staff members. If desired, we are happy to provide you with a separate offer for this service. Summary of key data: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation: 780%, very high recovery capability, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h, oil lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Connected load: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locks - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Installation dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Installation dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Includes cover plate 3514 With a cover plate, you not only protect your membrane from UV radiation, but also convert your mobile-base vacuum press into a mobile worktable that can be used flexibly in your company. Nsdoywpt Iepfx Airjwh - Coated cover plate - Solid welded steel frame - Opening support by gas pressure springs Commodity code: 84669280 Net weight: 105 kg Gross weight: 105 kg The cover plate is only available in combination with a vacuum press.

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description Nsdpfx Aezcwitsirewh The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: used, Year of construction: 2026, equipped with 3 receiving sections, 2 of which have 2 chain hoists and transfer to the tube rail conveyor system in the raw materials receiving area, with 16 conveyor sections and manual transport, also used as a sorting system, ceiling-mounted, installation probably started in 1997 with continuous expansions until 2022, with a transfer station from the manual system and tube rail to 2 cold storage facilities, all ceiling-mounted, includes 3 WTI weighing stations integrated into the system, each with a display, wall-mounted, control cabinet for the tube rail system, stainless steel ultrasonic cleaning station for tube rail hooks, display screens for the tube rail scale, tube rail system (galvanized). Nwjdpfxjzhazbe Airjh

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Nodshwrhfspfx Airswh Cooling Mode: WATER COOLING

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Handover: in its current condition as inspected -Condition: the steel pipe is bent Nwjdpfxezff U Ie Aireh -Diameter: 1220 mm -Wall thickness: 18 mm -Length: 10,000 mm -Weight: 520 kg/m²

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe Nodpfx Asrpqlieirjwh -Diameter: 508 mm -Wall thickness: 8.8 mm -Length: 4,400 mm -Weight: 108 kg/m²