Used Veneer Equipment for sale (39,675)

Year of construction: 2017, condition: ready for operation (used), This LNS Quick Load Servo 3 was manufactured in 2017. It features a weight of 570 kg, dimensions of 2048 mm in length, 1486 mm in width, and an adjustable height between 1248 and 1748 mm. It supports a maximum bar diameter of 120 mm and a bar length up to 1600 mm. With a loading cycle time as low as 4 seconds, it's ideal for high-efficiency operations. Contact us for more information about this machine. Application Types Bjdpsx D D H Tsfx Agzoct Other Automation Equipment

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Panel press in very good working condition + Grecon finger jointing Bcedpfx Agot Uduxozot

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 36 h, On behalf of a customer: City Ranger 3070, like new, only 36 operating hours, cab, air conditioning, Isri luxury seat with seat heating, front sweeper reduced to 122 cm, spreader, cruise control, etc. Has not been used for winter service yet. Only €82,000.00 plus VAT. Available immediately. Bcjdpfxox N Ayfs Agzot

Condition: used, Year of construction: 2021, load capacity: 1,200 kg, lifting height: 3,000 mm, mast type: simplex, drive type: Elektro, High lift truck Load center: 600 Mast type: Standard Bsdpeumy Dmefx Agzect Technical condition: New

Condition: excellent (used), Independent Machine, Top machine Max working width mm 1350 Working height (thickness) mm 3 - 130 Built-in electric and command panel Electronic Programmer PCM (software Costa Sanding Manager) Feeding speed (adjustable) 4 - 24 m/min Bodpfsgx Hnhsx Agzjct No. 1 Vacuum unit (power Kw 11) Pressure "shoes" to allow the process of short workpieces Air blowers on the abrasive papers Total power installed KW 69 No. 7 Working groups: 1°) Cross belt TR7, pad with No. 84 sectors (TPR16) (Kw 15, with inverter) 3-16 m/sec 2°) Cross unit XLS (for trimming), with N° 122 abrasive elements (Kw 1,5, with inverter) 3°) Longitudinal unit FTR-3, roller (diam. mm 330) Kw 2,2 with inverter, 40 Sh (3-20 m/sec) 4°) Longitudinal belt TP16, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 5°) Longitudinal belt TP16 Super-finisher SF/3250, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 6°) Scotch-Brite SB180 (Kw 1,5) diam. mm 180 7°) Rotary air-jet blowers for the panels cleaning SR

Condition: used, Year of construction: 1995, Used Machine Year of manufacture: 1995 Features and technical data: Bjdpfx Asx Enr Sogzoct - Total pressing force: 70 t - Press area: 2500x1300 mm - With gold anodized plates in good condition - Press chamber height: 400 mm - 4 cylinders, diameter 80 mm - ABS safety system, can be deactivated - Emergency cord - Extendable support, left side - Swivel button operation - Hydraulic unit at the bottom - Cleaned and assembled/pressed by ELKOM staff Dimensions: 2900 x 1480 x 2050 mm Weight: 2950 kg Availability: short-term Storage location: 63934 Röllbach

Year of construction: 2024, condition: ready for operation (used), This MIRECS EasyLift was manufactured in 2024. It features a stable base plate for secure anchoring, a Demag Chain Hoist DCBS with a balancer for precise load handling, and a load capacity of 150 KG. The vertical stroke reaches up to 1,500 mm with a total height of 3,000 mm. Ideal for stationary applications requiring robust and precise lifting solutions. Contact us for more information about this machine. Application Types Other Automation Equipment Bedpfxox D Rbdj Agzoct

Condition: good (used), Code: 0262 Brand: ITALPRESSE Model: UT 6/P - CE Standard Hydraulic hot press with electric boiler using diathermic oil for carpentry, furniture, custom-made furnishings, doors, window frames, panels, composite materials and various - CE Standard Technical data: Assembled steel platen dimensions: mm 2500 x 1300 Intermediate table Bodpfxsx E Axge Agzsct Opening 400 mm N° 6 pistons Thrust 90 ton Diathermic oil heating by electric boiler Two-hand control for closing the press Timer Perimeter safety emergency rope Overall dimensions mm 3200 x 1700 x 1950 h Weight kg 3300

Condition: used, Year of construction: 1961, functionality: fully functional, Maximum log length: 1.8 m Bcjdsx N Shlopfx Agzot Maximum log diameter: 0.8 m

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 1,200 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, drive type: Elektro, High lift truck Load centre of gravity: 600 Mast type: Standard Condition: New device Technical condition: New Battery type: PzS Bcsdpfxsumy Dto Agzjt

Condition: used, Veneer Press BÜRKLE U 80 - used - Bcsdpfx Aexfg A Hogzet Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Bcodpfox Enp Rjx Agzjt Equipped with Busse aluminium energy-saving plates (the spots visible in the pictures are only visual; the plates are in perfect condition) Total press capacity: 80 t Press cylinders: 4 x 90 mm Opening width: 400 mm Weight: approx. 3100 kg Total length: 2610 mm Total width: 1240 mm Total height: 1890 mm Motor power rating: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Availability: short notice Storage location: Röllbach

Condition: used, Year of construction: 1984, total width: 1,500 mm, total length: 3,000 mm, total height: 2,000 mm, Empty weight: 2.500 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 Bcedpfx Asxhcg Togzjt - Max. workpiece height [mm]: 300 - Number of work zones [pcs]: 1 - Number of cylinders [pcs]: 4 - Cylinder diameter [mm]: 70 - Transport dimensions: 3000mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2024, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21861 Specifications: 2024 model 0 hours Not used 380 volts/ 50Hz Ready for delivery Bcsdpfx Agexyptkszet Description: We have a 2024 Endustri GM dust filter for sandblasting for sale. Everything works as it should and above all it is like new. It has not been used. Ready for delivery Own weight: 1 Model: GM støvfilter for sandblåsing

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, Jaw crusher 20 25 Bcodpfx Aex Ni Tfjgzet

Condition: used, Year of construction: 2022, load capacity: 5,000 kg, lifting height: 4,800 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Front tires type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, full free lift, Bedpfeu D Ra Uex Agzjct

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 Bcsdpex Edl Esfx Agzjt electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: used, Stack paper cutting machine, guillotine cutter, flatbed cutter SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Rubber, paper and veneer shear Machine no. 60178 Year of manufacture 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Feed height: 140 mm Back gauge: max. 1550 mm Bjdpfx Agjdzqnyszjct Knife drive motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Two-hand operation for blade stroke release - Automatic pressing by pressure clamp holds the paper stack on the table - Manual clamp and stroke release via foot pedal (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electrical control unit (not operational), no wiring diagrams, no user manual - Back gauge adjustment via servo motor (motor, controller, and control unit present, not operational) Required space (L x W x H): 325 x 270 x 165 cm Space required for transport without disassembly: length 330 cm x width 270 cm x height 175 cm Space required for transport with disassembly: length 550 cm x width 220 cm x height 175 cm (machine + separate table) Machine: length 270 cm x width 190 cm x height 175 cm Side table: length 240 cm x width 170 cm x height 120 cm Weight of assembled machine: approx. 5000 kg (excluding the transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sale price does not include the 20 mm steel plate the machine is stored on. (Price for the steel plate: 900 EUR net)

Condition: used, total width: 3,960 mm, total length: 1,600 mm, total height: 2,300 mm, Empty weight: 5.000 kg Bcjdpfx Agownhulozst Price: On request - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 1300 - Max. workpiece width [mm]: 3300 - Number of cylinders [pcs]: 6 - Transport dimensions: 1600mm x 3960mm x 2300mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Serial number: 24-0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21860 Bodpfx Agexypqcezjct Description: We have a Pitsan ER80 paint filter for sale. This is used for larger painting/varnishing projects to provide better ventilation. Ready for delivery Own weight: 1 Model: ER80 malefilter

Condition: used, Year of construction: 1972, functionality: fully functional, pressing force: 240 t, opening width: 150 mm, plate length: 3,300 mm, working height: 900 mm, plate width: 1,400 mm, Automatic Veneer Throughfeed Press Ott Pressomat D 99/240 with 6 cylinders in operational condition: – Heating plate size approx. 3300 x 1400 mm – Total pressing force approx. 240 t – Specific pressing pressure approx. 5 kg/cm² – Number of steel heating plates: 2 pieces – Heating plate thickness approx. 40 mm – Number of hydraulic cylinders: 6 pieces – Piston diameter: 6 x 140 mm – Piston stroke approx. 150 mm Bcodpfx Aox Nr Edegzot – 4-way rack and pinion guide – Working height approx. 900 mm – Plastic Mylar belt – Automatic end-feed loading – Loading station / feed table in front of the press – Conveyor belt approx. 7100 x 1420 mm – Pneumatic control – Roller track (disc rollers) in front of/above the loading station – Roller track approx. 2000 x 1400 mm – Disc rollers running in a water bath – Roller conveyor with mobile support feet – Outfeed roller conveyor approx. 3300 x 1400 mm – Hot oil boiler HG 80 for heat transfer oil – Heating capacity approx. 80,000 WE/h – Oil burner for light fuel oil – Year of manufacture: 1972, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and test run possible by appointment

Condition: used, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,800 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: New Bcodpfsun Dahox Agzot Front tires type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, heating, full cab, full free lift,

Condition: used, Year of construction: 1991, High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Bsdpfx Aewng Tmjgzect Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21889 Bcjdpfxsxy Evne Agzst Description:A list with dimensions and quantities is included.The total amount is 1,540 m² of formwork.It is possible to purchase a smaller volume if desired.Can be delivered on short notice.

Condition: used, Year of construction: 2015, total width: 1,800 mm, total length: 3,600 mm, total height: 2,100 mm, Empty weight: 3.750 kg Veneer press Steton P 70 E Year of construction 2015 Press size 3100x1300mm Opening 450mm Bcjdpfx Aewnh R Tegzet Number of cylinders 6pcs. Cylinder diameter 70mm Electric heating 19.6kW, max. 120 degrees Max. pressing pressure 70 tons Pressure 2 KG/cm² Dimensions. 3600 x 1730 x 2060mm, weight 3750kg - Year: 2015 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 3600mm x 1800mm x 2100mm (l x w x h) - Transport weight [kg]: 3750kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels